Lexmark printer - "unable to read CUPS raster data" message

I have been using my Lexmark z2320 printer for about a year with my macbook pro, with no issues. However, since yesterday I have been getting the "unable to read CUPS raster data" error message, and can not print.
I am using 10.6.2 osx.
I have tried re-installing the drivers, and downloading new drivers from the website, but all to no avail.
I noticed some similar posts, but could not find a clear resolution.
THank you.

hi. Thanks for the response and apologies for the delay - I am new to this, and was expecting an email alert when somebody had responded.
I downloaded the update, and I now get the message:
+Color table is missing. You must uninstall and reinstall the printer software.
How should I proceed?

Similar Messages

"unable to read CUPS raster data" message

I can't seem to print a doc anymore. I keep getting the above message. This is with a Lexmark X4550 printer/scanner. I'm just (at the moment) trying to print an e-mail message (from Thunderbird) out. Any ideas? Thanks.

I had this today too - Lexmark has drivers that sometimes hang. Go into activities monitor, you'll probably see a Lexmark process eating up tons of CPU cycles. Force quit it, and try again. Let me know if that works for you - it did for me!

Unable to read payload from the message object

Hi
I have a scenario where i am send request to http receiver and getting the response. When I am testing through WFETCH it is working fine. But when i am testing through XI I am getting the follwoing error
Unable to read payload from the message object
I have tested the XI payload in mapping. I have done all kinds of testing but it is still giving the same error.
One more strange thing is
I have done one BPM scenario where Data is coming from Source to BPM( which is asyn) and then from it will go from BPM to Target (which is sync) But when I am checking the SXMB_MONI... it showing the messages like this
Source to BPM
Target to BPM
Target to BPM.
But i think it should show message like
Source to BPM
BPM to Target
Target to BPM
why i am getting the flo

Hi
Check with the connection string & Authorization of user you have used.
MSSQL string is
jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
Thanks
Gaurav

Unable to read payload from the message object in XI

Hello Guys,
Please help me about my problem in XI version 7.0.im quite new here.
im trying to test my config but error message occured. "Unable to read payload from the message object"
when i checked the comm channel this is the error message :
Error during database connection to the database URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor': com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "TRAVEL:SelectMethod=cursor" requested by the login. The login failed.'
when i tried my login in sql it works...but in this message the login is failed..what shall i do..
Please advice.
Thanks in advance
aVaDuDz

Hi
Check with the connection string & Authorization of user you have used.
MSSQL string is
jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
Thanks
Gaurav

Labels printing : "unable to read format"

Hello
I have configured a Printronix Label printer as a network printer (Acess Method U).
Communication test is successfull
But when I execute a printout I have the following message:
=========================
Print request processing log
Errors occurred processing this print request
Unable to read format ZDINA6. l_rc = 1
There may be no printout
=========================
Despite format ZDINA6 is properly associated to the Device Type (ZPTXASC4) of the printer.
Inizialization commands are all empty, as suggested by Printronix Manual
What am I missing?
Thank you!

Thanks David and Lokeswara for your answers.
Oss did not help actually: I also tried with Postscript type, instead of STDN II, but did not succeed.
As to ZDINA6 format: it is in use in their old system, same labels, same configuration; a part from the access method, because they currently have a Win NT print server in between that the new system does not contemplate.
Still a mistery, at least to me..
Thank you for now

Error reading label stock data ; Messag No: CBGL00103

Dear Experts,
I have created the Label Size and Label Stock SIze in 108 client and moved to 105 via SCC1 in same server DEV.
Customizaiton is appering in 105 now.
While creating the Label stock, getting following error
Error reading label stock data; see long text
Messag No: CBGL00103
Dignosis: An iternal error occured reading the previously created data record or label stock header data
Main Program: SAPLCBGL_LS04, SAPLCBGL_LS00
Function Module: CBGL_LB10_LSHDIOT_READ
Return Code: 1
Procedure
Notify your system Adminstrator.
Can anybody help to resove this issue.
Regards
Amol

Hello Michael,
Thanks for identifying exact solution.
Appriciating your SAP EHS Expertise...

DG4ODBC on Windows Oracle 11.1 unable to read SQL_WCHAR ( Unicode ) data ?

I have setup two databases on Windows that can be access by ODBC. Both database contain the following table :-
create table test1 ( col1 varchar(10) );
insert into test1 values ('ABCDEF');
The first database returns columns as a SQL_CHAR and the second returns data as SQL_WCHAR.
In SQLPlus the first database works just fine ‘ABCEDF’. The second gives ‘``````’ a single ` character for every character in the field.
As far as I can see DG4ODBC is reading SQL_WCHAR's as UTF8 characters. Can any one confirm this and is there a way to get round the problem ?
I have tried various HS_LANGUAGE, HS_NLS_NCHAR settings already but to no avail.

Why does it return an SQL_WCHAR is not the issue.
The issue is why doesn't it convert it correctly when other applications do. I am almost convinced the issue will be down to the character mapping but I'm not 100% sure where or how to set it ( HS_NLS_NCHAR or possibly HS_FDS_MAP_NCHAR ? ) . The other application I used were not configurable in terms character
Oracle Corporation --- TUESDAY APR 15 2008 14:17:06.688
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- TUESDAY APR 15 2008 14:17:06.688
Version 11.1.0.6.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL16UTF16"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
setting HS_FDS_SUPPORT_STATISTICS to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
Exiting hgosdip, rc=0
ORACLE_SID is "FB"
Product-Info:
Port Rls/Upd:6/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.1.0.6.0_0006, Instance:FB
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=2000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=110000
Entered hgolofn at 2008/04/15-14:17:06
Exiting hgolofn, rc=0 at 2008/04/15-14:17:06
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
Exiting hgoinit, rc=0 at 2008/04/15-14:17:06
Entered hgolgon at 2008/04/15-14:17:06
reco:0, name:SYSDBA, tflag:0
Entered hgosuec at 2008/04/15-14:17:06
Exiting hgosuec, rc=0 at 2008/04/15-14:17:06
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using SYSDBA as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2008/04/15-14:17:07
HS_FDS_CONNECT_INFO = "FB"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2008/04/15-14:17:07
dsn:FB, name:SYSDBA
optn:
##>Connect Parameters (len=31)<##
## DSN=FB;
#! UID=SYSDBA;
#! PWD=*
Exiting hgogenconstr, rc=0 at 2008/04/15-14:17:07
DriverName:FBODBC.DLL, DriverVer:01.02.0002
DBMS Name:Firebird, DBMS Version:01.02.0002
Exiting hgocont, rc=0 at 2008/04/15-14:17:07
SQLGetInfo returns for SQL_CATALOG_NAME
Exiting hgolgon, rc=0 at 2008/04/15-14:17:07
Entered hgoulcp at 2008/04/15-14:17:07
Entered hgowlst at 2008/04/15-14:17:07
Exiting hgowlst, rc=0 at 2008/04/15-14:17:07
SQLGetInfo returns " for SQL_IDENTIFIER_QUOTE_CHAR
SQLGetInfo returns Y for SQL_COLUMN_ALIAS
Exiting hgoulcp, rc=0 at 2008/04/15-14:17:07
Entered hgouldt at 2008/04/15-14:17:07
Exiting hgouldt, rc=0 at 2008/04/15-14:17:07
Entered hgobegn at 2008/04/15-14:17:07
tflag:0 , initial:1
hoi:0x12f074, ttid (len 27) is ...
00: 54435056 31545345 6433352E 36363065 [VPCTEST1.53de066]
10: 2E352E64 312E3132 383537 [d.5.21.1857]
tbid (len 24) is ...
00: 54435056 31545345 322E355B 38312E31 [VPCTEST1[5.21.18]
10: 5B5D3735 5D342E31 [57][1.4]]
Exiting hgobegn, rc=0 at 2008/04/15-14:17:07
Entered hgodtab at 2008/04/15-14:17:07
count:1
table: RGS
Entered hgopcda at 2008/04/15-14:17:07
Column:1(COL1): dtype:-9 (WVARCHAR), prc/scl:10/0, nullbl:0, octet:20, sign:1, radix:0
Exiting hgopcda, rc=0 at 2008/04/15-14:17:07
Entered hgopcda at 2008/04/15-14:17:08
Column:2(COL2): dtype:-8 (WCHAR), prc/scl:10/0, nullbl:1, octet:20, sign:1, radix:0
Exiting hgopcda, rc=0 at 2008/04/15-14:17:08
Entered hgopcda at 2008/04/15-14:17:08
Column:3(COL3): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:20, sign:1, radix:0
Exiting hgopcda, rc=0 at 2008/04/15-14:17:08
The hoada for table RGS follows...
hgodtab, line 577: Printing hoada @ 022815C4
MAX:3, ACTUAL:3, BRC:1, WHT=6
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
12 VARCHAR N 20 20 128/ 10 2000 0 40 COL1
1 CHAR Y 20 20 128/ 10 2000 0 40 COL2
4 INTEGER Y 4 4 0/ 0 0 0 0 COL3
Exiting hgodtab, rc=0 at 2008/04/15-14:17:08
Entered hgodafr, cursor id 0 at 2008/04/15-14:17:08
Exiting hgodafr, rc=0 at 2008/04/15-14:17:08
Entered hgotcis at 2008/04/15-14:17:08
Calling SQLStatistics for RGS
IndexType=SQL_TABLE_STAT: cardinality=0
New Index:RDB$PRIMARY10, type=3, ASCENDING, UNIQUE, cardinality=0
ordinal position = 1
Calling SQLColumns for SYSDBA.RGS
Column "COL1": dtype=-9, colsize=10, decdig=0, char_octet_length=20, cumulative avg row len=15
Column "COL2": dtype=-8, colsize=10, decdig=0, char_octet_length=20, cumulative avg row len=35
Column "COL3": dtype=4, colsize=10, decdig=0, char_octet_length=20, cumulative avg row len=39
Exiting hgotcis, rc=0 at 2008/04/15-14:17:08
Entered hgopars, cursor id 1 at 2008/04/15-14:17:08
type:0
SQL text from hgopars, id=1, len=50 ...
00: 454C4553 41205443 43222E31 22314C4F [SELECT A1."COL1"]
10: 2E31412C 4C4F4322 412C2232 43222E31 [,A1."COL2",A1."C]
20: 22334C4F 4F524620 5222204D 20225347 [OL3" FROM "RGS" ]
30: 4131 [A1]
Exiting hgopars, rc=0 at 2008/04/15-14:17:08
Entered hgoopen, cursor id 1 at 2008/04/15-14:17:08
hgoopen, line 83: NO hoada to print
Exiting hgoopen, rc=0 at 2008/04/15-14:17:08
Entered hgodscr, cursor id 1 at 2008/04/15-14:17:08
Entered hgopcda at 2008/04/15-14:17:08
Column:1(COL1): dtype:-9 (WVARCHAR), prc/scl:10/0, nullbl:0, octet:20, sign:1, radix:0
Exiting hgopcda, rc=0 at 2008/04/15-14:17:08
Entered hgopcda at 2008/04/15-14:17:08
Column:2(COL2): dtype:-8 (WCHAR), prc/scl:10/0, nullbl:1, octet:20, sign:1, radix:0
Exiting hgopcda, rc=0 at 2008/04/15-14:17:08
Entered hgopcda at 2008/04/15-14:17:08
Column:3(COL3): dtype:4 (INTEGER), prc/scl:11/0, nullbl:1, octet:20, sign:1, radix:0
Exiting hgopcda, rc=0 at 2008/04/15-14:17:08
hgodscr, line 521: Printing hoada @ 023093F8
MAX:3, ACTUAL:3, BRC:100, WHT=5
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
12 VARCHAR N 20 20 128/ 10 2000 0 40 COL1
1 CHAR Y 20 20 128/ 10 2000 0 40 COL2
4 INTEGER Y 4 4 0/ 0 0 0 0 COL3
Exiting hgodscr, rc=0 at 2008/04/15-14:17:08
Entered hgoftch, cursor id 1 at 2008/04/15-14:17:08
hgoftch, line 114: Printing hoada @ 023093F8
MAX:3, ACTUAL:3, BRC:100, WHT=5
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
12 VARCHAR N 20 20 128/ 10 2000 0 40 COL1
1 CHAR Y 20 20 128/ 10 2000 0 40 COL2
4 INTEGER Y 4 4 0/ 0 0 0 0 COL3
SQLBindCol: column 1, cdatatype: -8, bflsz: 22
SQLBindCol: column 2, cdatatype: -8, bflsz: 22
SQLBindCol: column 3, cdatatype: -16, bflsz: 4
2 rows fetched
Exiting hgoftch, rc=0 at 2008/04/15-14:17:08
Entered hgoftch, cursor id 1 at 2008/04/15-14:17:08
hgoftch, line 114: Printing hoada @ 023093F8
MAX:3, ACTUAL:3, BRC:2, WHT=5
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
12 VARCHAR N 14 20 128/ 10 2000 0 40 COL1
1 CHAR Y 20 20 128/ 10 2000 0 40 COL2
4 INTEGER Y 4 4 0/ 0 0 0 0 COL3
0 rows fetched
Exiting hgoftch, rc=1403 at 2008/04/15-14:17:08
Entered hgoclse, cursor id 1 at 2008/04/15-14:17:12
Exiting hgoclse, rc=0 at 2008/04/15-14:17:12
Entered hgodafr, cursor id 1 at 2008/04/15-14:17:12
Exiting hgodafr, rc=0 at 2008/04/15-14:17:12
Entered hgocomm at 2008/04/15-14:17:12
keepinfo:0, tflag:1
00: 54435056 31545345 6433352E 36363065 [VPCTEST1.53de066]
10: 2E352E64 312E3132 383537 [d.5.21.1857]
tbid (len 24) is ...
00: 54435056 31545345 322E355B 38312E31 [VPCTEST1[5.21.18]
10: 5B5D3735 5D342E31 [57][1.4]]
cmt(0):
Entered hgocpctx at 2008/04/15-14:17:12
Exiting hgocpctx, rc=0 at 2008/04/15-14:17:12
Exiting hgocomm, rc=0 at 2008/04/15-14:17:12
Entered hgolgof at 2008/04/15-14:17:12
tflag:1
Exiting hgolgof, rc=0 at 2008/04/15-14:17:12
Entered hgoexit at 2008/04/15-14:17:12
Exiting hgoexit, rc=0 at 2008/04/15-14:17:12
Message was edited by:
user630562

Why I am unable to read/write thermocouple data using FIFO

I like get data using 9213 module. I used example VI for this. And to get the data according to my desired samling rate, I used FIFO.
The problem is, if I use FIFO, I do not get any data when run the real time VI.
But, if I like to get data using cluster, then it is OK.
Also, can you tell me why the error comes when I use FIFO and run the program?
My sampling desired rate is 1200 sample/sec. I like to acquire data for 30 seconds after the trigger.
Attachments:
Error_50400.jpg ‏34 KB
FPGA.jpg ‏201 KB
realtime_temp.jpg ‏249 KB

Good Afternoon,
I would suggest lowering the number of elements into the invoke node in your real time VI. You only need the number fo samples times the sampling rate for the number of elements input. Hope this helps!
-Cody C

Sql loader unable to read from pipe

Hi All:
I'm using named pipe along with Oracle SQL*Loader to load some 20 millions rows into database.
The source of the pipe is from a Java application which write to the pipe using simple FileOutputStream.
It can be observed that the Oracle SQL*Loader need to wait a lot on the Java application to produce enough data for loading.
The waiting is fine. However, the Oracle SQL*Loader always exist after loading about 1 million rows with output like:
SQL*Loader-501: Unable to read file (upipe.dat)
SQL*Loader-560: error reading file
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
And in this case, the Java will throw IOException with information:
Exception in thread "main" java.io.IOException: Broken pipe
at java.io.FileOutputStream.writeBytes(Native Method)
at java.io.FileOutputStream.write(FileOutputStream.java:284)
It runs on Linux environment with 11g database.
Any idea why this will happen?

check
SQLLDR NOT LOADING ALL DATA IN DAT FILE : SQL*Loader-510/SQL*Loader-2026 [ID 741100.1]

Payslip Programme unable to read beyond a certain Point(points guaranteed)

Hi
My client is unable to get the payslip for employees beyond a certain period.I have used Transaction SARA and PC_PAYRESULT but still unable to find out the real reason.My questions:
i.How do I find out till how much the data is archived?
ii.Is the payslip programme RPCETD00 unable to read the arcfived data?
iii.Can archived data be read from the clusters?
Thanks and Regards
Aniket C

Hallo Aniket,
My experience is that you can read archived data from transaction pc_payresult
Also H99CWTR0 report can retrieve archived data.
However, I am looking for a payslip report that can retrieve archived data. I have not found it yet.
Regards Bente

Nokia E71 post update error: unable to read messag...

hi! i am unable to read few of my messages say' every 2 out of 10...after a success full update to version410.21.010 and RM-346. actually i did a simple data restore (containing messages , settings and contacts) after the update.. i did it twice after that to check but all in vain..infact OVI suite too does not display the message in my inbox here is a screenshot of the unreadable message with a questionmark sign in front..though message details are available but cant open the message!!! in sequence : 2nd,3rd,4th,7th and 9th
SID

no no no....the matter is not the old messsages...but the new messages that are to come. The probability is that some of them too not become unreadble!!! though i dont have synced them instead have made a backup of them...restoring which seems to be the bone of contention! i want to know is that an update error or should i not restore my backup to avoid the problem after the format???
SID

Can't print from Adobe Reader X

Whenever I try to print from Adobe Reader I get the message "Adobe Reader has encountered a problem and needs to close." The error signature is:
AppName: acrord32.exe
AppVer: 10.1.2.45
ModName: acrord32.exe
ModVer: 10.1.2.45
Offset: 0005e985
It does not matter if a PDF file ois on the web and it opens as a web page or if I open a file that is alreadty on my comuter.
I tested printing from an older version of Adobe Reader and it does not create a problem (that version is coming up when I download files that
are on my Cloud server.
What is the solution, if any?

Kindly try the workaround available at http://kb2.adobe.com/cps/928/cpsid_92870.html and this should help resolve the problem
Thanks,
Atul Agarwal

PI 7.3 - AEX "unable to read configuration data" and login problems

Hello Friends,
after installation of AEX, i'm facing some problems.
1.I'm not able to login with any user, i created during installation wizard. So i cannot check any user in NWA -> User Administration.
2.Once more, while opening http://<host>:<port>/rep or http://<host>:<port>/dir, i get the following error message.
Can somebody help me?
I think, there is a problem with the users, which have been created during installation. How can i check this? Is there any chance?
Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
PI (http://<host>:<port>/dir/start/index.jsp). Below is the part of the error message that is showing up. Appreciate your suggestions:
Exception class: com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed
Message
Unable to read configuration data (ExchangeProfile/aii.properties)
Stacktrace
Thrown:
com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed: Unable to read configuration data (ExchangeProfile/aii.properties)
at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:220)
at com.sap.aii.utilxi.prop.api.AIIProperties.initServerMode(AIIProperties.java:518)
at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:97)
at com.sap.aii.ibdir.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:151)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:43)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
Please let me know if I am not clear.
Edited by: Clarence on Feb 6, 2012 3:28 PM
Edited by: Clarence on Feb 6, 2012 3:28 PM

hi,
>>>>Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
if you have java stack only there is no exchange profile anymore...
https://weblogs.sdn.sap.com/pub/wlg/28334
Regards,
Michal Krawczyk

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to read data from Analog Devices 6b11 module - error code 1240

Hi everyone,
I'm trying to read data from a thermocouple with an AD 6B11 module in an AD 6BP16-1 backplane using RS232 serial. I've been following this guide:
http://digital.ni.com/public.nsf/allkb/8C77E5E52B4A27968625611600559421
Everything seems to work out well until step 13, where I call the "AD6B Input Module - Read Data.VI". I get an error code 1240 stating something like "invalid parameter or unable to read instrument".
Has anyone got any experience with this error or suggestions to fixing it?
Thanks in advance!

That user guide is 20+ years old. The serial functions from that day used 0 for com 1, 1 for com 2, etc. Make sure you have the correct one selected. Please provide the exact error message instead of 'something like'.

Lexmark printer - "unable to read CUPS raster data" message

Similar Messages

Maybe you are looking for