Lexmark scanner no longer functions

Since upgrading to Yosemite 10.10.2, my Lexmark X2650 scanner/printer doesn't work. (It's out of ink and I haven't used it as a printer for years, so I don't know if the printing function is also not working.) When I try to scan something, I just get this message: "The scan operation is canceled." I have the latest driver for this device. Any suggestions?

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

Similar Messages

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to reprogram a different key to be my plus/equals key? Can I program a function key? key

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to re-program another key to do that function? Can I re-program a function key to do this function?

Water + electronics do not mix. Something was damaged insode, and the logic board may be corroding as is.
Take it to a Genius Bar for an evaluation and repair estimate.
This is accidental damage and not covered by warranty.

I had first registered my iPhone with an old laptop, the computer is no longer functional. I cant now transfer music from my iTunes account to my phone, I am not sure what to do any suggestions?

I had first registered my iPhone with an old laptop, the computer is no longer functional. I cant now transfer music from my iTunes account to my phone, I am not sure what to do any suggestions?

Iphone will sync itunes content with one computer at a time. If you sync to another, it will erase the current content and replace with content from the new computer.
What have you tried?
What happened?

HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
Is there a way to resolve this issue?

I just downloaded IOS 8.0 and now my Brookstone Scanner no longer work. I read in theScanner app that my scanner is not compatible with iOS 8.0. Is there an Update coming to fix this? Or can I downgrade to IOS 7.0. Right now my scanner is no good.

MMy Brookstone Scanner no longer works with IOS 8.0. Is an Update coming to fix this?

You'll have to contact Brookstone, the developer of the app in question to find out if they will update the app.

Siri no longer functions with ios 6.1

I have an iphone4s that I just upgraded the IOS from 6.01 to 6.1 and Siri no longer functions. It just freezes at "what can I help you with" and never does anything or it indicates by voice that there is a problem. Cell WIFI and local WIFI are functioning normally.

I just figured it out, I went into settings and turned Siri off and back on and it seemed to trigger it into working.

Zipeg and limewire no longer functioning (both bounced back).

Greetings,
Zipeg and limewire are no longer functioning on my mac (limewire first, about 3 weeks ago). In fact, i've tried to re-downloaded both softwares but the applications will only bounce back and not functioning. Previously (2 months ago), i have a same problem with MacDJView. Any idea what's wrong with my mac?
Any help will be greatly appreciated. Thanks!!

Hello n_n:
Some programs will not run if they are located outside of the "/Applications" directory on the
boot volume. I have Zipeg, but I don't have the other programs you use, so I don't know
if they will run on your second partition. My Zipeg install is on my boot drive, I've never
tried to run it on my data partition. I, like you, do have programs located on a second partition,
and every now and then I try to install one there and it will refuse to run, if it does refuse to run,
I go ahead and install it on the boot volume, however the majority of apps don't care where they
are installed.
Did you just install these apps or have they been working and just decided to quit?
Kj

In Earthlink Webmail, the "check all" and "delete" button for deleting multiple messages no longer function (although they work in I explorer).

When using the webmail application for earthlink email, the "check all" option to select an entire page of messages at once no longer functions. Same problem with the "delete" buttons that are located at the top and bottom of the page with multiple messages. Consequently, the only way to delete a message is to open the message and delete it in that view -- extremely tedious if there are a lot of messages.
This is a recent change, in the last few days. Everything works fine in I explorer. Earthlink support suggested I start Firefox in safe mode and restore firefox default settings. I went through the process on the help page. It didn't help.
I'll provide the earthlink link, but it is my email page that is the problem.

Same here.
- select multiple mails with the SEARCH option (manually selecting seems to work fine)
- click the move button
- list of folders appears (witn account & cancel options that both still work)
- click on a folder
- mail flies to this folder (animated)
- list of folders remains visible
- the cancel button does NOT work
- the accounts button takes you back to the root "directory" of your accounts
- in my case "live" and "exchange"
- this screen is a dead end. Clicking on both the account names and the cancel button do not work
A complete restart fixes the problem

My Apple TV remote's left arrow no longer functions, any solutions?

My Apple TV remote's left arrow no longer functions. I replaced the battery. Any solutions known?

May have spilled some liquids on the remote...
I suggest to purchase a new remote and pair to the ATV

I am on Lion (10.7.4). After a recent upgrade my iWork 09 does no longer function. Any explanations?

I am on Lion 10.7.4. After a recent my iWork does no longer function Any solutions?

Found out that if I did a PRAM reset at this point when restarting after the Kernell panic, the installation continues without problem. Previously i was doing the PRAM reset prior to starting the install process and that did not help. Problem solved

SOME BUTTONS ARE NO LONGER FUNCTIONING

I have an older Ipod and some of the buttons on the front are no longer functioning properly, I cannot change anything just play the songs that have been playing forever. I have to hit the button many times to get it to accept but eventually it will play.

This worked for me as well.
http://www.wikihow.com/Hard-Reset-an-iPhone
On reset - the LG worked as before.

Why is iPhone 5 no longer functioning with AirDrop

Is there a reason iPhone 5 no longer functioning with AirDrop when it did before?

After managing to get it to charge 100%, i realise the connector in the iphone is lose, it moves from left to right, only charges when moving to the right, def a lose connection on iphone. Speaking to customer services

Canon MP 780 scanner no longer working w/ Mountain Lion

Okay, I've put in my time (four flippin' hours) to try and figure out what to do about my scanner no longer being supported in Mountain Lion. Canon is incredibly unhelpful (tried to get a number for support, but they don't give me an option of what number to call for my printer . . . not listed on the website). Tried finding MP Navigator 3.0, but it's only avaiable overseas (?! Not to be too ugly of an american, but what's THAT all about?!).
Am I just SOL? I *hate* the idea of throwing a perfectly good printer away!
I will never, ever upgrade again until I absolutely have to. I've spent about 10 hours recovering from this "upgrade" to ML (including seven hours on the phone with support, plus two trips to the apple store where they erased and reinstalled, check hardware, etc.) . . . and then I run into hassles like this. First world problem, I know, but still . . .
Sigh,
Dave

I was hoping to avoid paying $40 for VueScan (rather pricey), which is pretty much what the printer is worth. I find it annoying that Brother is unwilling to upgrade their software, thereby encouraging yet another printer to be added to the enormous pile of e-waste that we're generating.
Next time I'll just avoid upgrading the OS. It wasn't broke, and this sure didn't fix it. But thank you for trying to help.
Are there any other software scanning packages that are available besides VueScan?
Dave

HT6114 HP Office Jet Pro 8500 Scanner no longer works with Mavericks upgrade

I have an all-in-one printer/copier/fax/scanner, HP Office Jet Pro 8500. The scanner no longer works with the Mavericks upgrade. Is it possible to get the scanner back in use? The printer and fax is fine, but I really use the scanner a lot. Please helap me.

The following link to the HP Support site indicates that scanning is still supported for the OfficeJet Pro 8500 using Mavericks but also indicates that "you may need to scan in a different way than you did before you installed Mavericks." See the FAQ section of http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en &os=4159&product=3752456&sw_lang=#N1237

How do you deauthorize computers that are no longer functional?

How do you deauthorize computers that are no longer functional?

i followed the directions to deauthorize one "fried" computer and one old Windows laptop i no longer use from my new MacBook Pro. When i go into iTunes on my new MacBook Pro, however, iTunes says i still have 5 authorized computers and i can't set up my music on my laptop using iTunes Match. I did not deauthorize all my computers because i still have an iphone and two ipads. Now that i've invoked deauthorize, what am i supposed to do for the next 12 months until i can deauthorize again?

Lexmark scanner no longer functions

Similar Messages

Maybe you are looking for