Lexmark X4550 drivers not working?

I had my Lexmark x4550 working wifi with tiger, however i now have leopard and i cannot use the printer wifi?
I have seen other posts on this but i have uninstalled all previous drivers and downloaded the new ones from the American Lexmark site, several times.
The printer connects over wifi with the green light but when i go to print utility or to print, my mac cant see the printer, even after adding it through system preferences? It works fine with usb though?
Can anyone help?

Have you contacted Lexmark support?

Similar Messages

U330 Windows 7 Drivers Not Working

Hello,
I have recently been in the process of updating all of my drivers on my u330-2267EU to the latest Windows 7 versions. I had been waiting for this update to the drivers site for some time since I was able to get Windows 7 installed before the Oct 22nd release. I am running Windows 7 64bit and I am running into some trouble with these newest drivers not working correctly.
u330 Driver Download Site (Using Win 7 64bit Versions): http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16
Switchable Graphics: there are 2 new Windows 7 drivers related to video that I downloaded. One referring to the discrete ATI graphics card, and the other to the Intel Graphics Media Accelerator. After installing both of these, setting BIOS for Switchable Graphics, and running the Switchable Graphics program from the desktop after bootup, brings up the desired menu with the option to switch from power saving gpu to the high performance gpu. When I click the "high performance gpu" button, the screen flickers and fades to black momentarily as it should, but when the screen returns and after waiting for a few minutes no switch is made, it just stays in the powersaving gpu. Suggestions?
Power Management Software: I also downloaded Lenovo's Energy Management Windows 7 driver for the u330. After installing the software I was initially able to bring up the menu to change power options, but the options that I chose would not make any apparent changes. Actually, after installing the program, it made my screen incapable of changing its brightness using the "function + arrow" button combination. Also, no longer when i change my default power windows power options will it adjust my screen brightness. It just stays the same no matter what. The only way that I can now change the brightness of my screen is by going into the graphics settings of the Intel GMA and change the settings there, but that is a completely horrible way of having to do that.
So there you have it, after all this waiting I still dont have the ability to utilize the switchable graphics nor properly use the Lenovo Power Management software. Oh yea, and I still cant adjust the brightness of my screen. I have re-downloaded and re-installed these drivers many times to try to get them to work correctly, but so far no luck.
I would greatly appreciate any help on the subject or at least have the knowledge that someone at Lenovo has noticed these problems and a fix is coming soon
thanks!
Solved!
Go to Solution.

check out our thread here
http://forums.lenovo.com/t5/Windows-7-Launch/U330-Windows-7-Drivers-Problem-amp-Solutions/td-p/16716...

Amd video drivers not working after win 10 upgrade

AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again. Alienware here i come.

Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad. FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

I can print to a Lexmark X4550, but not scan (with Image Capture)

Following tips (by "Lexmark Listens" and others) I succeded in printing (via USB and wifi) to a Lexmark X4550.
But when scanning (via USB) using the Image Capture app (included in Mac OS), Image Capture sees the scanner a couple of seconds, then complains that no scanner is connected (although it still is).
This happens with a MacBook (Pro), but not with another MacBook (white).
I tried (not necessarily in this order):
- reboot
- repair disk permissions
- re-installing drivers (both printer driver and "Image Capture Application Scan Driver for for 10.6.8 and later Mac OS") from Lexmark support site.
- running Mac OS software update (which updated the printer driver to version 2.8]
- resetting the printing system: http://support.apple.com/kb/HT1341
How can I completely remove all files related to Lexmark printers&scanners and try again installing from a clean state?
(I see in other posts that a Lexmark Uninstaller is sometimes located in HD/Library/Printers/Lexmark/YEAR/ ; I used to have one here, but it was removed during previous attempts at getting the scanner working ; and anyway when I run this Uninstaller at the time, it did not completely clean the /Printer/Lexmark)
My problem is very similar to this one described in this bug report in Lexmark knowledge base:
http://bit.ly/MOR9bd
But the patch proposed is "For Mac OS X 10.6 only" and titled "LexmarkPro800-Pro900SeriesQFE1.0.0.dmg" so I don't think it would work for a Lexmark X4550. (Indeed I installed this patch and the problem is still there).
As for the workaround suggested, "When using Apple's Image Capture application, do not use the "Show Details" option [...]", I can't get it to work: as soon as I launch Image Capture, it starts scanning (a preview) and the "Show Details" bouton is grayed out.
I've already spent many hours trying to get this printer-scanner to work with my Mac.
Any suggestion would be very helpful!

Same issue, sort of. After ML upgrade, Lexmark x264dn fails to register as a printer & scanner, there is no scan tab anymore. Also, image capture application is stuck in a crash loop until I disable mDNS (bonjour) on the printer. Still, it does not register as a scanner anywhere (protoshop, image capture, preview...)
I have installed all the package scripts from Lexmark's Mountain Lion support page. No dice.

HP drivers not working for Windows 8.1

Hi,
I've been given this laptop and it came pre-installed with Windows 8, touch screen and every driver works fine on Windows 8 till I've upgraded it to Windows 8.1, touch screen no longer works installed the latest driver from the HP website and the own built in HP support assistant and verified it works for 8.1 and it still does not work. Any help would be much appreciated.
Regards.

Hi there @DuskHunter
Welcome to the HP Support Forums!
I understand that you updated to windows 8.1 , and now some devices are not working correctly. You did not specify the exact product you have , but I did find the support page for the closely related 14-n033tx, so you can give the drivers there a try.
HP Pavilion TouchSmart 14-n033tx Ultrabook Drivers
If not, then please post the full product number for your notebook. See the following, if you need help in finding that.
How Do I Find My Model Number or Product Number?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Network controller, pci device, wifi drivers not working

my device model is dv6-6121tx
i am not able to install network controller and PCI device drivers...
also my wifi is not working..
no wireless adapter in device manager..
please help...
This question was solved.
View Solution.

Hello again samyak. You are very welcome!
The first device (the virtual adapter) is virtual network which allows you to use the computer as a "software router." Unless you're using this PC as an Access Point this device is useless to you. This article has more information on the service. Your best bet is to just disable it. Try the following.
Click Start, go to "All Programs," and select "Accessories."
Right click on "Command Prompt" and select "Run as Administrator."
Type the command "netsh wlan set hostednetwork [mode=disallow] and press Enter. This should disable the virtual adapter.
Exit Command Prompt, reboot the computer, and verify that the device is no longer listed.
The device with the "ACPI/HPQ0004" ID actually returned two results. The first was the Quick Launch Button software. The other was related to Hard Drive Protection. Try this driver.
Make sure to reboot after all of these instructions have been completed. Then go back to Device Manager and verify whether everything looks as it should.
Continue to have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

JDBC drivers not working in QA for multibye characters

Hi,
we have a problem with JDBC and deployed in DEV system and its works fine, but the same when we deply in QA its not working.
the problem we are trying to use the simple select query from ORACLE DB.
In ORACLE DB they converted the chenise char to English after that our JDBC drivers are not able to pick the multibite char.
XI JDBC Adapter shows below error with a SELECT Query
SELECT Query:SELECT * FROM APPS.ITEM_XI_V The Chinese character are converted to English and becomes multibye characters.
Error:Error during conversion of query result to XML: java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
Assumption is that the issue with older version of ojdbc14.zip (JDBC Driver file)
Reference:http://www.coderanch.com/t/299231/JDBC/java/UTF-conversion
implement SAP Note 941317 in order to resolve the current issue.
Note 941317 - XI / PI JDBC Adapter: Known Problems / Incompatibilities JDBC Driver Deployment. Refer to SAP Note 831162
after apply as per note for DEV system its works fine, but the same when we did for our QA system still the same error.
Thanks,
Venkat.

Hi Gurus,
Any idea where i am doing wrong.. in QA i am able to extract data with simple select statment with normal tables...
Thanks,
Venkat

Sound & Graphics Drivers not working for Qosmio F15R

I was granted this Laptop with nothing more than AC Adapter. I didn't need the information contained in it and didn't want to deal with its configuration issues either, so I started planning formatting it. Looking for model number label at the bottom found it says "Qosmio F15R". I couldn't found this model number at support website for drivers, closest model was F-15AV201, figured it out by watching its pictures in detailed specs documentation. Everything but Bluetooth seemed to be available, so I formatted and reinstalled Windows XP Pro SP3 and then downloaded all drivers. Touchpad, Ethernet, Wireless, Flash memory, TV-FM and DVD-RAM worked just fine. On the other hand Sound, Display and Modem didn't work at all.
While installing Sound driver I got this error message:
http://img21.imageshack.us/img21/5075/sounddriver.png
(it says: "couldn't find driver, reboot and reinstall")
After installing Display driver checked display adapter properties and found this:
http://img402.imageshack.us/img402/5171/vga.png
(no information available and even scrolling on web browser is crappy)
After installing Modem driver realized it was not identified:
http://img237.imageshack.us/img237/4613/devicemanager.png
(Sound, Display, unknown device, Modem)
I thought I was using drivers for wrong model, so I downloaded PC Wizard, a freeware that identifies hardware configuration:
http://img262.imageshack.us/img262/6452/pcwizard.png
wich gave me chipset, processor, video card and-
http://img175.imageshack.us/img175/4121/soundr.png
-sound card: 82801FB ICH6 AC'97.
I couldn't find any proper driver nor for sound nor display, so I tried a shareware, Everest:
http://img337.imageshack.us/img337/6199/everesth.png
wich showed me the same chipset, video card and sound card model numbers than PC Wizard.
I realized that chipset, and display model didn't match detailed specs documentation. I thought that hardware was not working properly, so I downloaded and installed a Linux distro (Kubuntu 9.10 RC i386), and fount out that display and sound were working just fine but I need it to work properly with Windows XP.
Can anyone tell me where can I get sound and display drivers (and even Bluetooth if possible) for this laptop? Thanks in advance. Regards.

I have the same problem with audio driver. I can send you the graphic driver that works with Qosmio F15R if you need. My email: [email protected] Toshiba is so bad in supporting with their products.

2011 MBP with Win7 on BC and numerous drivers not working

I'm working on a tech project and have run into a problem that i can't fix. <grr> I followed the Apple directions for installing a second OS on Boot Camp and found some good tips from other online walk throughs, but am still having a problem with a number of the drivers.
I have a 2011 MacBook Pro 13" with the most up to date version of Snow Leopard. I have installed Boot Camp and Windows 7 Pro on a 50 Gb partition. I have installed Windows 7 and activated it. Once Win7 was up and running I updated the Boot Camp drivers with 3.2.0, the latest version that I know about. Initially I had no recognition of either the wired or wireless controllers even after the Boot Camp 3.2. I was able to determine that I had a Broadcom wired ethernet card and found the driver and installed it via USB so that I could use Win7 to access the internet.
The drivers that, as found from the Device Manager, are not working are as follows:
Network Controller - Wireless
PCI Simple Communication Controller
SM Bus Controller
High Definition Audio
Apple Keyboard -> Bluetooth USB Host Controller (though the USB ports are active and operational)
Facetime HD Camera (1 of 2 not working)
I have been able to use the wired internet to download and install all of the available Win7 updates, but nothing can be found on the above drivers. I even manually installed the drivers for each of these components from the Snow Leopard disk for Boot Camp and they would not install.
From all the information that I can find on the Win7 Boot Camp install, nothing more recent than early 2010, everyone seems to have everything just install and work. I have not seen anything from anyone about the wireless and wired network cards not working or any of the other issues that I'm having. The majority of the issues were with the optical audio LED staying on or some other more trivial issue.
Anything you can suggest would be great so that I can use the internet in Win7. The rest of the drivers are second to getting on wireless.
Thanks in advance for your help. If you have any more detailed questions please let me know and I'll get answers back.

I have a 15" MacBook Pro, built July 2011. It came automatically with Lion. No OS X disc provided in box with Lion, due to it being a download only OS.
I followed the boot camp process to partition the hard drive and format the appropriate partition, to then install Windows 7 Pro Upgrade (clean install - works fine). Just like the original post, the following drivers that will not install properly include:
- trackpad
- keyboard
Even when trying to re-install the drivers again manually off the boot camp disc, a window pops up to stating that the drivers may not have installed properly and gives you the options to either re-install the drivers 'using the compatability settings', or 'no the drivers installed ok'.
It's almost like it thinks Windows 7 is an old program....weird.
The keyboard and trackpad is missing from the Boot Camp control panel, so I can't change the settings for the keyboard and trackpad, to get them functioning the way they're meant to - like it does in Mac OS X.
I thought that this page would help: http://www.reviewmylife.co.uk/blog/2010/06/08/windows-7-on-macbook-pro/ but no it didn't. The boot camp control panel screen dumps shown in this link, looks nothing like mine, due to the fact that the drivers refuse to install properly.
I have spent hours trawling many mac and windows forums with not luck.
Anyone with a MBP running Lion OS and Windows 7 Pro have these issues?
Does anyone have a solution?

Realtek AC97 Audio Drivers Not Working!

Hi.
I recently had a HD crash and I was forced to format it. I installed everything just as the first time, and everything worked fine except the audio drivers. The problem is, it does actually install the drivers, but when I look at Sound Options or Device Manager there are no drivers for the soundcard. It says installation is complete and then I restart the computer, and when I try to update with MSI Live Monitor 3, it says I got the latest drivers installed. STILL doesnt work.
Does anyone have a hint about the problem? Any virus? On another note Norton discovered viruses on my computer, even though I had installed the antivirus-software before connecting to internet\network. This is what it found:
W32.Randex.gen - msconfg.exe
W32.Spybot.Worm - vsmon.exe
And some adware.
In virus description it says the viruses can come with programs but I have only installed a few programs, and it says it will spread through IRC. I have 2 other computers in my network, but I dont know if they have anything to do about it. The program will not work correctly whitch is infected with this virus, so maybe there is a chance Live Monitor got it and somehow cant get the sound working... probably not, but this is all i can give.
Tried to reformat another time but still same problem... motherboard broken??

Quote
motherboard broken??
Possibly. One way to try is see if it works fine with different os'es. If you can download knoppix's latest version (which I hope supports the onboard audio, like my new fedora linux does) and try it, then you can find out if the sound works or not.
Knoppix is a kind of special linux that you don't have to install, it just runs off of a cd.
On another note, I find that if I run live update, or open live monitor and search for new drivers, my sound is cut off whether I update or not till the next reboot.

Presario R4000 Laptop Audio Drivers not working

So, I've got this older Laptop, the Compaq Presario R4000.
It was giving me a really hard time with software with the original OS and stuff, so I decided to format it and install my own Windows XP Professional on it, as opposed to the Compaq-ware filled XP Home that was already on it.
So I formatted, installed Windows, and found the driver page for it.
I Flashed the BIOS despite the fact that I don't think it was necessary, but I wasn't sure.
I installed the graphics drivers no problem.
Installed the wireless device drivers, though not sure if these are working, but it's not significant.
What is significant however, is that the Audio Drivers provided on the site do not work at all. I looked for other drivers, looked for other driver versions for the OSs and various other Presario models, but nothing has worked.
I don't know what the problem is. I'm really hoping someone is able to help!
Thanks in advance.
Error Message:
BTW, I should mention what the error message I'm getting is.
A command window pops up running the following command:
c:\swsetup\SP29873>start /min \swsetup\audio\setup.exe /s
I tried fiddling with the batch file that was running these commands to see if that would help, but it doesn't.
Still always get the same error message:
"Windows cannot find '\swsetup\audio\setup.exe'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."

I have the same error message, have you figured it out yet? If yes, please tell me what you did <text deleted> Thanks
Message Edited by WendyM on 09-07-2009 08:48 AM

Satellite L755D-S2579 AMD Drivers Not Working on Fresh Windows 7 Install

Hi,
The HDD died in my L755D-S2579 yesterday. I was able to install Windows 7 on a new HDD but cannot get the AMD drivers to work correctly. I've downloaded the latest drivers from the support page and it seems to go through the install but the Display menu continues to use the Generic Standard VGA Graphics Adapter instead of the AMD drivers. When I try to open AMD Vision Engine Control Center it says that there are no settings that can be changed at this time. I've tried uninstalling the generic drivers and uninstalling and reinstalling the AMD drivers but nothing is working. What can I do to get this to work? I can't continue using this laptop if it's running at 1024x768.

Satellite L755D-S2579
What is the part number of your computer? It looks something like PSK32U-03P00X.
-Jerry

Sound Blaster X-FI drivers not working

I have a sound blaster x-fi card, im pretty sure thats the model, and i downloaded updated drivers that were supposed to support it i believe it was SBXF_PCDRV_XPVT_LB_2_18_0015.exe. After installation i have no sound at all and if i try to chose the volume mixer it gives me an error message: "There are no active mixer devices available..."
It shows that it is installed properly and functioning in device manager and Windows Audio Service is running. After the updated drivers weren't working i rolled back to my previous drivers and the problem is persisting even with the old drivers that worked before. I'm at a loss I have tried everything i can think of even reloading drivers from the original installation cd from 2007 and i cant find anyone with the same problem on the net.

the full model number of the device is sb0460
I used auto update to find the offending drivers that are the whole cause of this issue. I know it is a problem with windows but it was caused by me attempting to update these faulty drivers. Updating the drivers is the only thing i have changed on the system that now has no devices available for playback. i have since uninstalled and removed the card from my mobo and switched to onboard audio and now that doesn't even work.
Just like the sound blaster, the onboard audio's drivers are working fine and the device says its functional yet i cant select it as a default playback device and i get the same errors when trying to open the mixer.
So basically the botom line is that the auto updater or the subsequent drivers that were retrieved by it messed up something in my system that even system restore cant fix.
I would love to do a full re-installation of windows xp media center but this is a hand me down computer and i dont have the installation disks. I'll probably have to buy or request one then wait 6 months just to have a functional computer again.

Network drivers not working and Windows Error Recovery Message issues

I have a ThinkPad laptop T530 series in which about five of my network adapters are showing the exclamation mark in a yellow triangle next to them. When clicking on properties, it states that" this device will not start--code 10." I have tried the network sharing troubleshooter and this has not worked.
The second issue I am having is that upon starting my computer I am constantly getting a Windows Error Recovery message which I have to press on the proceed to Windows as the startup repairs do not seem to rectify the issue.
I would very much appreciate if someone could help me resolve these issues

I don't have a solution to your main problem, but I have one for the error message.
If I am right, then Airport is causing the problem. 192.168.1.1 is the address that the Airport Base Station will take right away. To fix this, you need to go into Airport Admin Utility. Click on your base station and click "Configure." Click on the "Network" tab. Now it should look something like this:
http://i198.photobucket.com/albums/aa187/adam_0/Network%207-28-07/Picture2.png
The problem is that the Airport is using the same IP number set as the router that you have. If you disconnect or unplug the Airport, then that would fix it easily, but if you want to keep your Airport connected, then all you need to do is pick one of the other number formats, like this:
http://i198.photobucket.com/albums/aa187/adam_0/Network%207-28-07/Picture4.png
Now, I'm no expert on this stuff, but from what I understand, this could get you one step closer to your destination. Good luck!

Lexmark P6250 scanner not working with iMac after recent software update, any ideas?

The scanner has always worked with the iMac but after a recent software update only the printer works now. I have searched the apple communities boards and have downloaded a variety of drivers suggested but nothing has solved the issue.
When I load print and scan from system preferences, I select to open the scanner and the process just hangs. I can see the scanner and am able to select to open but not able to scan.
Any ideas on how to resolve?

Unfortunately I have tried this and I have downloaded new drivers and restarted both the iMac and printer/scanner numerous times but I still only have the printer working.
I have tried to use preview via system preferences, print and scan and the when I select open scanner for preview the application hangs. I have also tried to use image capture and there is an error when selecting the scanner device of "Lexmark Language Error". When selecting overview within image capture I am advised that the size tryng to be scanned is too large when nothing has been selected and the default setting are standard size and then image capture hangs.
All features were working fine prior to conducting a software update about 8-10 weeks ago. I have downloaded further software updates which I had hoped would sort this issue but it hasn't.

Lexmark X4550 drivers not working?

Similar Messages

Maybe you are looking for