LF Advice/Tips/Sources for self learning

I am on holidays for summer and would like to run through some medium to high lvl java tutorials. If anyone has some great sites would you care to share with me =). I am open to anything, i rov learning, thanks.

Darryl.Burke wrote:
Plenty more at [Project Euler|http://projecteuler.net/]
dbOh, dammit Darryl! I was trying to forget that site: now I'm at it again!
; )

Similar Messages

Highlevel information on creating a environment for self learning

I am new to SAP and hoping to create an environment at home for self learning. I have a strong back ground in infrastructure/ unix / systems adminstration/ oracle database etc. I was unable to find information at a high level how I can go about creating an environment for learning the SAP Basis and Netweaver administration. Can some one please clarify the following:
a) Is it possible to get a trial version that I can use to install the SAP or I will have to buy a license?
b) Since, I am not using it for production - can I renew this trial version by changing the date or there are ways to request new trial keys?
c) Can you please provide the list of all the softwares that I need to install to get a full SAP environment setup?
Edited by: neeraj mendiratta on Dec 26, 2007 1:58 PM

Hi,
You can buy the IDES version online. See the below thread:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.biztalk.general&tid=4a9dac5f-0e74-4422-aef5-aa2bcc7b3831&p=1
Have a look at any search site where in you can find lot many sites to purchase SAP IDES.
However, you can simulate the landscape. If you buy the license, you will have access to SAP market place, download the latest patches and also look for solutions.
Also, all the software that are required (apart from the OS) are bundled in the package. You need not buy any on the shelf software additionally.
Rgds,
Raghu
Reward, if you find the solution informative.

Advice/Tips needed for Interactive PDF

I am looking for any suggestions/advice/tips on creating a interactive PDF. I have 1 title page document and this document has 8 links on it. These links will go to 8 new/seperate pdf documents. I'd like to create it so that when you click on a link it goes straight to that document and only gives you the option to go BACK to the title page.
I know I can create this with bookmarks, but with bookmarks you have a loing list on the left sidebar. The tricky part is I can only show one document and a back to title page link.
Any suggestions or tips on how to accomplish this task? I have Acrobat Pro 9.
Thanks

Bookmarks are the way to go on this. You can set the default viewing of the PDF to not include the bookmarks and such (under ctrl-D for the document properties).

Looking for Self Learning/Training

Hello All,
I'm completely new to SAP and would like to begin the learning required to use/implement the tool. Can anybody point me in the right direction? I read about modules but honestly I've no idea wth it is. Your help is appreciated.
Thanks,
Rola

Hi Rola,
It depends on which area you want to learn. For example, in ERP system we have finance module, production planning, material management, sales, etc.
You can find SAP online help documentation:
http://help.sap.com/
For live and virtual training offerings, course booking, and an overview of SAP education services.
www.sap.com/services/education

Data source for Deposit Advice (XML) and Live CheckWrite (XML) reports

Hello All,
We need to customize the Deposit Advice (XML) and Live Check Write(XML) reports to accomodate a few business requirements. We already have customizations for these reports in non-XML versions. For Ex: USPAYPST.rdf for Deposit Advice report. As these non-XML RDF reports are going to be unsupported by Oracle soon, we need to customize the XML versions of these report available in R12.1.3.
As these reports are kicked off by the PYUGEN spawned program, therefore I need information on the data source for these reports as soon as possible.
Looking forward to your prompt help.
Thanks,
Rahul

Now, I have anew problem here. I modified the USPAYPST.rdf report for Deposit Advice and then changed concurrent program output to XML from Text.
I attached a RTF template to the concurrent program to have the output in XML.
When I run Deposit Invoice Report from the SRS window, it finishes off normally and log file says the number of records processed but no output file is generated.
I also tried looking into the XML generated through View XMl and there too no output file is generated.
I am confused if the Deposit Advice program can only generate Text output. As PYUGEN is the executable for this report, I have no idea if XML file can even be generated.
All pointers to this issue are welcome.
Thanks,
Rahul

Data source for the concurrent program 'Send Separate Remittance Advices'

Hi All,
We have requirement to develop a custom report to send the remittance to the vendors.
But we are unable to figure out on how to get the data source for the standard program 'Send Separate Remittance Advices'.
The program is of the type Java concurrent program. Is there any way to get the XML tags for this program.
Thanks,
Manoj

hi,
pls see:
R12 Send Separate Remittance Advice - Data Source (srini)
and also:
http://apps2fusion.com/apps/14-fwk/69-java-concurrent-programs
http://oracle.anilpassi.com/xml-publisher-concurrent-program-xmlp.html

Data source for deposit advice xml and check writer xml

Could someone please tell me where I can find the data source for the Deposit Advice XML and Check Writer XML programs. Since these executables are now a spawned process (PYUGEN), I don't know how to get to the data source. I was able before to look at the queries in PAYUSPST.rdf and PAYUSCHK.rdf. Where are these queries located now? Any help is appreaciated.

Hi All,
I applyied the patch 6399100 and i got the seeded Check Writer (XML) and Deposit Advice (XML) programs.Im able to run the Check Writer (XML) with Parameter (Check Style :Seeded Archive Check Writer Template ) but where as the im unable to run the Deposit Advice (XML) due to Error msg: "No enties found for list of vales"for the 'Check Style' Parameter.
And for the above (only for Deposit Advice) i am not able to ecexute the SQL script given in the Doc ID : 459306.1 due to the error msg : cannot insert NULL into ("HR"."PAY_REPORT_CATEGORIES"."REPORT_GROUP_ID") if i see query the select * from apps.pay_report_categories where short_name like 'ARCHIVE%' there is no record exixts for ARCHIVE_DEPOSIT....
for this we required any other patch/setups.
And is the "Third Pary Check" will support XML Publisher ??
Any respose will be greatly appriciated.
Thanks,
Madhu
Message was edited by:
user589951

Voice synchronization with text(words) for a self learning project.

Trying for voice synchronization with text(words) for a self learning project. I have about 20 swf files with lengthy text to synchronize. Please suggest the best possible way, not the tedious manual way, please...Thanks..

Trying for voice synchronization with text(words) for a self learning project. I have about 20 swf files with lengthy text to synchronize. Please suggest the best possible way, not the tedious manual way, please...Thanks..

Good source for learning - SQL Stored Proceedures using Dreamweaver

I am looking for a good source for learning how to integrate
Stored
Proceedures using Dreamweaver?
Is there a book or something online?
Thanks

Hey Lee,
You find yourself in that position, I find myself in that
position, every
damn developer/programer in the world find themselves in that
position. It
may be on different levels, but everyones in the same boat.
Here is my suggestion. Take the existing knowledge you have,
pick a
technology that is a bit more futureproof (if the one you
have is getting
outdated) and one that isn't too far removed from the one you
know and put
it all into that one area.
Databases are really important if you want to be a decent web
developer. If
you're serious and want to be good then devote time to a
particular database
and get to know it well. I would suggest SQL Server. You
don't have to be
DBA standard but get as much knowledge on it as you can.
Never underestimate
your required knowledge of databases.
Set yourself goals. Say to yourself "In 6 months I want to be
a proficient
developer in this language" and go for it. Don't get
side-tracked into
something else just keep focused on one area and get good at
it. Yes, that
language will become outdated in time but you will be all the
more ready to
take on the next because of your past experiences.
I try to look at it like this; It is better to a master of
one technology
and know enough to get by in others than a Jack of all
technologies but a
master of none.
Pat.
"lee" <[email protected]> wrote in message
news:[email protected]...
> Thanks Pat...I only looked at it briefly but it looks
like what I needed.
>
> The biggest problem that I have is that I don't have
enough time to look
> into some of this stuff...
>
> Over the years, I've gotten to a certain level of
proficiency in certain
> things, I can do quite a bit but there always seems to
be yet another
> technology to master as the Old Ways go away.
>
> To be honest, I really just want to be an artist with
some programming
> skills but the nature of this position demands that I
"learn It all."
>
> Meanwhile, all those other skills have to be put
asside...I really should
> master flash...I really should work on my illustration
skills...I really
> should master CSS. I really should master...I don't
know, name it. And if
> I really wanted to abandon my ...LIFE...I could,
perhaps, figure it all
> out.
>
> What is so tiring is that my skill set is stretched SO
f-ing thin that I
> can never, possibly catch up. The only cure is time but
often even that
> goes against me.
>
> Anyways, thanks for the link. I'll probably be back
later with questions.
>
> Thanks Pat.
>
> If anyone else finds a good source, let me know.
>
>

Study source for 1Z0-051 exam Oracle11g SQL Fundamentals certification

Greetings,
What are some good sources for this exam that are legit. I have the OCA/OCP Oracle Database 11g All-in-One Exam guide, read the whole section regarding SQL and have practiced the test questions until I scored 100% multiple times. Yet (with all humility), I failed the exam. I don't want to cheat and will keep trying until I pass it the right way! I'm going to keep studying the areas I need to really master., but I noticed that the real Exam was nothing like the practice exam. For me, the real exam was a lot trickier and there were a few questions that the book didn't cover. The guy working at the test center recommended testking but upon further research, some sites consider using testking as cheating. I have not purchased any new study guides and would like feedback to some legit study guides. Is the transcender study guide legit and worth it? Please pardon me if this question has been asked a dozen times. I will scour the forums for more info regarding this but also wanted some direct feedback.
Thank you,
A mon

A mon wrote:
Rene,
Thanks for the link and the advice. Very helpful! And yes, it got to the point where I knew some of the answers before I finished reading the questions.
Thanks,
A monI was going to say possibly the cheapest way is buy the sybex Book : ISBN-13: 9780470395127 which is like the Watson Book ... but it isn't that cheap andalso coves 1z0-052 which you don't need.
( Selftest Sofware is reputed to be good, Transcender a little better (they are both Kaplan Brans and overlap common material). Ucertify may be cheapter but quality may be less. And make sure you get the right site and not a phishing link pretending to be them.
.... wsa it you who i said to try the exam and see where you were really at ? .. if so sorry and better luck next time. Perhaps though it is an opportunity to revise study technique.
See: http://blogs.oracle.com/certification/entry/question_of_the_day_how_to_pre
.... Doing your own flash cards and notes can be useful.
I always regard practice questions as precious and leave it as late as possible in study before doing questions.
(If you must peek ahead choose a chapter just before half way through the book and do end of chapter questions for that only).
But I won't even do end of chapter practice questions until I think I know the whole exam topics and have notes on all the material.
Only when I think I know it all will I do even end of chapter questions.
And I wont do them if I have read up on the topics during the day. I will wait until the next day.
And after doing end of chapter results I re-read the chapter and topics and practice. But I wont redo those questions for a few days
And only when I get good enough practice score from the chapter do I take a full practice test.
Basic principle is concentrate on learning and use the precious study ids to fill the gaps. It's a little slower getting there that way but these is more chance of a pass.
Edited by: bigdelboy on 19-Jan-2012 14:49 typos.

Using an SAS2008 Cube as a data source for BI Publisher errors

Hi All,
I am trying to use a SAS 2008 cube as a data source for a report in BI Publisher. When I defined the data source under the admin section I gave it the following details:
Data Source=ntsasqa01;Provider=msolap.3;Initial Catalog=WWPR_SMG
With a username / password that has access to the cube.
When I try and test the connection the OC4J instance stops running and the test does not finish or error. If I use the data source and then setup a report and then try and view data I get an error like the one below:
/app/oracle/OracleBI/xmlp/XMLP/Admin/DataSource/msmdacc.dll ( 0509-022 Cannot load module /app/oracle/OracleBI/xmlp/XMLP/Admin/DataSource/msmdacc.dll.
0509-103 The module has an invalid magic number.)
I am not sure if the error is related to the initial issue of not being able to complete the test.
I need to find a solution though as I have to make use of MDX to access the cubes.
Please could someone give me some advice.
Thanks,
Kim.

Hi Kim
1. SAS cubes are not currently supported - http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10417.pdf. Unless SAS cubes can use the MS drivers?
2. If you try and pursue it you might check the permissions on the ddll in the error to ensure you have rights over it.
Either way you are not supported with a SAS cube so you are kinda on your own. Sorry I dont use SAS so Im not going to be much help other than stating the obvious :0)
Regards
Tim

Creation of a generic extractor and data source for the FAGLFLEXA table

Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, Vishal

Hi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu

Need urgent help to generate SPL Data Sources for Line Items

Hi All,
I am trying to extract the Special Purpose Ledger Data from R/3 into BW. To do this, I am following the steps to generate the Data Sources for Totals table and Lien Items Table.
Using Transaction BW01 and BW03 on the R/3 side, I am able to generate the Totals Record-DataSource successfully.
But I am not able to generate the Line Items-DataSource. I am using the same procedure.
Can someone please help me or point me in the right direction. Are there any other settings I need to make to generate the Line Items-DataSource. Interestingly, I am able to generate the Line Items-DataSource for some other old ledgers in the System like ZZ and ZX. But I need the Line Items-DataSource from a ledger called ZP for which I am having trouble.
I would greatly appreciate if someone can get back to me ASAP.

During BW01, The Generate extract structure is fine for both Total and Line Item Table.The issue is when we run tcode bw03 where you assign the datasource to a ledger.
Here, I can assign only for the Total Records data source and NOT for the Line Items-DataSource.
I hope I could explain the issue. Looking forward for some advice.

How to change the jta-data-source for projects in EJB 3

Hi all,
Sorry my english! :)
I'm learning the EJB 3.0 and I'd like to change jta-data-source for projects in JDeveloper 10.1.3.1.
I explain:
In the same Application, I have a project with all Entitys and Session Beans. At the moment, the persistence.xml file is there with the jta-data-source tag.
I make a new project with JUnit (Cactus) for test the EJB's that I'd like jta-data-source reference the test database.
I make another project, with Servlet/JSP/JSF that use EJB's with interface and I'd like jta-data-source reference another database.
What kind of changes (workaround) I could make to solve this problem?
Thanks a lot!
Luciano

Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks

SAP WM Documentation for self study

Dear All,
I am SAP MM consultant & I am interested to learn SAP WM.
Can you please help/guide me to get SAP WM documentation for self study.
I appreciate your advise to learn SAPWM in better way. Thanks in advance.
Regards
BSA

Dear Basavaraj,
You can Download to PDF by clicking onto Download option right hand side top of the screen.You can download all the units and read it when you are offline. It will be very usefull.
Warehouse Structure in the Warehouse Management System - Warehouse Management System (WMS) - SAP Library
Regards,
Irfan

LF Advice/Tips/Sources for self learning

Similar Messages

Maybe you are looking for