LFA1 Table fields are not updated via IDOC for particular vendors
Hello,
We have a scenario where some of the additional vendor fields in transaction xk02 should be updated via inbound IDOC.
The IDOC segments have the corresponding vendor field values in it.
For particular vendors, the updation is not taking place for those fields.
What could be the possible reason. Kindly help me with this.
Hello,
that may be due to customizing.
You should check with functional consultant.
Regards
Similar Messages
-
Apps are not updating,keeps asking for Apple ID,can anyone help?
Apps are not updating,keeps asking for Apple ID and then goes back to saying update?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Last Skipped Date, Skip count, are not updated in any songs that i listen in my iPhone5s
I've been using smart playlist that's relays on the play count, last skipped date and skipped count fields... I have been using an old ipod to heard my music through this smart playlist that live updates all the time and it was working great.
So my issue is, since i bought a new iPhone 5S and start using it to listen music, my smart playlist that relays on " play count, last skipped date, skipped count " fields are not updating, and when i connect my iphone to the PC i realize that those fields never update after i play or skip any song in my iPhone.
So, I'm not sure if this is an iPhone restriction, that i need to use my iPod again to get my smart playlist that relys on those fields to work... or my iphone is defective and need to re-install the iOS.
Any help on this matter will be enormously appreciated
Thanks in advanceI have playlists that rely on the Last Skipped and
Skip Count properties of songs, but these items only
seem to be triggered if the song is fast forwarded
between 3-20 seconds into the song. I tried to skip
I think this is how it's intended, though there isn't much info on this feature. I've seen the same behavior and other users have reported same.
One thing that threw me off for a bit using this feature was trying to use with playlists where the songs had "remember playback position" checked. Last skipped doesn't register at all with these tracks. -
Unable to proceed in change document are not updating in CDHD, CDPOS tables
Hi all,
This is a question related to Change document.
I created one custom Change document object ZBUDGETS.
As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ZBUDGETS.
I included some of the authorized fields from FMIT table on which we placed the trigger.
And of course all those fields are change document enabled in the data element level. I generation of the update program was completed. And I got the function module zbudgets_write_document along with some include programs and structure.
Everything is fine, But i am unable to get this change document generated information to these tables are CDHDR and CDPOS.
the problem is when I make any expenditure like PO Posting, it will be logging in the FMIT table and the respective fields also updating. With this the Change document object should trigger and it should send the record in CDHDR and CDPOS tables. This is not happening. If the records are getting updated in the CDHDR and CDPOS tables I can use those include programs and function modules in my program to retrieve the changes in FMIT table.
Since I am unable to proceed further since the documents are not updating in CDHDR and CDPOS tables.
PrabhakarCDHDR and CDPOS will not be populated with entries only by creating the change document object.Change documents will be written to CDHDR and CDPOS tables only if the function zbudgets_write_document is called in the transaction which updates FMIT.
You need to find an use exit in the transaction updating FMIT and call the function zbudgets_write_document in that exit.
Refer the below link http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa01b6493111d182b70000e829fbfe/content.htm
-Kiran
*Please reward useful answers -
Not all fields are getting updated in transformation
Dear all,
Please help me in the following issue:
I have the following scenario:
DSO1 and CUBE1. From DSO1 to CUBE1 I have transformation. Fields are mapped one to one.
Some of the fields are getting updated in transformation (22 fields) and some of them are not updated in transformation. (2 - storage location and steel grade).
The fields exist in DSO 1 but don't go into cube.
I did the following:
1. deleted transformation and dtp, recreate = > not working
2. copied the cube, and create new transformation and DTP...not working.
Any help would be appreciated
Thank you
RamonaHi Ramona,
Storage location (standard infoobject 0STOR_LOC) has plant as compunding object, check whether this is the issue ? (may be check with Steel grade infoobject also).
Else, do some RSRV checks on the DSO and Infoobject, if it doesn't bring up any issue, raise a message with SAP.
Check your BW Support Pack level , is it the latest ? Give more details about the scenario ?
Cheers,
CK -
Issue with DEBMAS IDoc,not all fields are reflected in the IDoc Seg E1KNB1M
For IDoc type DEBMAS, there is a segment E1KNB1M. This segment is relate to the customer correspondence details (XD02 -> company code data -> Correspondence).
For any change to the customer master a DEBMAS IDoc is triggered which has data in segments including the E1KNB1M.
In my case for few customers, the not all fields in the segment E1KNB1M contain data. Few fields contain data but the rest are filled with u2018\u2019. This is happening only in the production system, for the same customer in the quality system the data is there as required.
I checked in debugging, and found that the data is correctly passed to the segment in program SAPLVV01 Include LVV01F01. And the segment contains data till the IDoc is triggered. I.e. the fields are not getting cleared at any point.
Can anyone suggest what is happening and how to fix this? Please note that the issue is only in the production system and not in the quality system ( for the same customer).BTT... Need some help on the above
-
Date and time fields are not getting updated in database
Hi,
I am Using the bapi SD_SHIPMENT_HEADER_CHANGE in my program ...
I am using bapi_shipemnt_create for creating shipment document but, trying to enter the date fileds using this bapi .
can anybody please tell me how shud i pass this variables exactly ...
i tried giving test data and checked this bapi .. the result in changing parameters is also appearing but in databade itself the date fields are not getting reflected ...
The fields ate DTDIS ,UZDIS, DATEN,UATEN. ( i am trying to map these fields in changing parameters)
gw_vttkvb_new-mandt = sy-mandt.
gw_vttkvb_new-tknum = gw_return-message_v1(passing shipment number )
gw_vttkvb_new-dtdis = gi_ship_doc-dtdis.
gw_vttkvb_new-daten = gi_ship_doc-daten.
gw_vttkvb_new-uzdis = gi_ship_doc-uzdis.
gw_vttkvb_new-uaten = gi_ship_doc-uaten.
APPEND gw_vttkvb_new TO gi_vttkvb_new.
CALL FUNCTION 'SD_SHIPMENT_HEADER_CHANGE'
EXPORTING
i_tvtk = '
I_DESTINATION =
I_DEPARTURE =
OPT_DIALOG = 'X'
IMPORTING
E_SERV_AGENT_FROM_DELIVERY =
E_ROUTE_FROM_DELIVERY =
E_LEG_DETERMINATION_DONE =
E_NUMBER_OF_CHANGED_LEGS =
TABLES
c_xvttk = gi_xvttk
c_yvttk = gi_yvttk
c_xvttp = gi_xvttp
c_yvttp = gi_yvttp
c_xvtts = gi_xvtts
c_yvtts = gi_yvtts
c_xvtsp = gi_xvtsp
c_yvtsp = gi_yvtsp
c_xvbpa = gi_xvbpa
c_yvbpa = gi_yvbpa
c_xvbadr = gi_xvbadr
c_yvbadr = gi_yvbadr
i_xtrlk = gi_vtrlk
i_xtrlp = gi_vtrlp
I_DEPARTURE_SEQUENCE =
I_XVTFA =
I_YVTFA =
CHANGING
c_xvttk_new = gi_vttkvb_new
EXCEPTIONS
invalid_change = 1
route_insert_failed = 2
tdlnr_insert_failed = 3
status_planned_failed = 4
status_registrated_failed = 5
status_loading_start_failed = 6
status_loading_end_failed = 7
status_completion_failed = 8
status_shipment_start_failed = 9
status_shipment_end_failed = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
**** Save shipment created
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
return = gw_return.
ENDIF.
Regards,
shilpa talluri .Hi,
Try this
DATA: wa TYPE zvariant.
wa-mandt = sy-mandt.
wa-z_var = 'test'.
wa-projid = 'test'.
wa-relid = 'test'.
wa-srtf2 = 'test'.
wa-clustr = 'test'.
wa-clustd = ''test'.
INSERT zvariant CLIENT SPECIFIED FROM wa.
Raul Natu -
Invoice details are not updating in XKOMFK table in vf02
Hello Experts,
I am facing an issue in vf02, invoice details in table XKOMFK are not getting updated becuase of which my user exit is not fuctioning correctly.
Please advice how the table XKOMFK will be updated in vf02.
Thank You,
Nusrat JahanHi,
Check this . You need to write code for "i_callback_user_command"
* Form f_user_command1 *
* This form will handle the user command from fm REUSE *
form f_user_command1 using p_ucomm type sy-ucomm
rs_selfield type slis_selfield.
data p_ref1 type ref to cl_gui_alv_grid.
call function 'GET_GLOBALS_FROM_SLVC_FULLSCR'
importing
e_grid = p_ref1.
call method p_ref1->check_changed_data.
case p_ucomm.
when '&DATA_SAVE'.
" Write your code for save
endcase.
rs_selfield-refresh = c_x. " Grid refresh
endform. " F_user_command1
a® -
File-to-rfc ..database tables are not updating??
hi xi friends..
in my file -to-rfc scenario.. without BPM ..
in sxmb_moni..it is showing successfull.. database tables in sap not updating..
my source structure..
workorders 1..1
..order 1..unbounded
...id
...operation 1..unbounded
.....id
.....closingdate
.....status
.....comment
my target is Zbapi_alm_conf_create..
Zbapi_alm_conf_create
...Zdetail_return 1..1
.....item 0..unbounded
...Ztimetickets
.....item 0..unbounded
.......orderid
.......operation
.......fin_conf
.......con_text
.......exec_fin_date
in message mapping:
MM_file_to_zrfc
i changed the occurance of target to unbounded..
message mapping like this..
my source structure..
workorders 1..1
..order 1..unbounded --------->Zrfc 0..unbouned
...id --------->Ztimetickets-item-order
...operation 1..unbounded ------>Ztimetickets-item 0..unbounded
.....id ---------->Ztimeticktes-item-operation
.....closingdate ----------->Ztimeticktes-item-exec_fin_date
.....status ----------->Ztimetickets-item-fin_conf
.....comment ------------>Ztimeticktes-item-conf_text
and also in interfacemapping ,changed the target occurance to unbounded.
and in ID ,interface determination using enhanced i selected interface mapping with occurance unbounded..
in sxmb_moni it is showing success..
in adapter monetering( receiver).
<i>Receiver channel 'cc_sap_work' for party '', service 'SAP_ERP__DEV' (internal name 'RfcClient[cc_sap_work]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=thotv, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2006-12-31 14:19:47 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
- OK: 2006-12-31 14:18:50 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE</i>
but the database tables are not updating..if i execute ZBAPI_ALM_CONF_CREATE manually in SAP ..tables are updating...
please guide me...
thanks in advance...
regards
RamHi..
my mappis is like this..
message message
.message1 message1
..workorders 1..1
..order 1..unbounded -
>Zrfc 0..unbouned
...id -
>Ztimetickets-item-order
...operation 1..unbounded -
>Ztimetickets-item 0..unbounded
.....id -
>Ztimeticktes-item-operation
.....closingdate -
>Ztimeticktes-item-exec_fin_date
.....status -
>Ztimetickets-item-fin_conf
.....comment -
>Ztimeticktes-item-conf_text
i didnt mapped message at root..is this necessary to mapp messages??
please tell me
regards
ram -
Excise Tables are not updating
Hi,
I have a issue in Depot sale. I created a GR against a PO. Then I posted a Excise invoice. But the excise tables are not updating.
Why it so? Plz explain.......
Thanks & Regards
SaeedHi,
While doing the GR through T Code MIGO ( Good Receipt + Purchase Order) > Tick on "Item Ok" & Enter > and see one more additional menu will appear > Excise Invoice >Is there two options 1) No Excise Entry 2) Create RG23D Entry.
If you need to update Excise detail through MIGO you can select "Create RG23D Entry" or if you not require to update Excise entry through MIGO you can select "No Excise Entry" & after generating the GR document you can proceed for Excise updation through T Code J1IG.
Hope that you are understood.
Thanks & Regds,
Rajesh Kolhe -
HR Tables are not updated due to compression error
We have a custom program that program used to copy data from Production system to other QA systems. The program uses the FM
Table_decompress to decompress the file downloaded from Production and update the HR tables like PA* series in QA.
While uploading the those tables from the file it updates half of the tables and other tables are
not updated as FM Table_decompress produces a exception saying "Compression error". what would be the problem here?
Edited by: Ganesh Kumar on Feb 2, 2011 10:14 AM
Edited by: Ganesh Kumar on Feb 2, 2011 10:25 AMI have provided some information below that may help.
Step 1. Update the device using VZ Access manager. Instruction below:
http://support.vzw.com/clc/devices/knowledge_base.html?id=14636
Step 2. Unplug the device (if tethered), restart the computer, and try another USB port (if applicable).
Step 4. Deleting and recreating dial-up connections.
http://support.vzw.com/clc/devices/knowledge_base.html?id=23830
Step 5. Try to connect.
Step 6. (If Step 5. Fails) Disconnect, unplug the device, completely uninstall the current version of VZ Access Manager, and restart the computer.
Step 7. Download VZ Access Manager from our website www.vzam.net
-On the main page, select Supported Devices on the left hand side.
-Under the Data Devices like for Verizon Wireless USB 760 (second from the bottom of the row)
-Select the link under the Windows 7 column for the Verizon Wireless USB 760
-Click Download Now and Save to the desktop
Step 7. Install VZ Access manager using the downloaded file
-Follow the step up instructions
-Plug in the device when prompted
-Try to connect
I hope this helps. -
Cannot update delivery attributes: the following field(s) are not updatable
Hi. I create in EBS simple Order
Now , my goal is to create a delivery , pick , change shipping quantity and ship confirm. Here is my code
DECLARE
p_sales_order NUMBER := 10014445;
p_line_number NUMBER := 1.1;
p_org_id NUMBER := 308;
l_shipped_quantity NUMBER := 5;
p_api_version_number NUMBER := 1.0;
init_msg_list VARCHAR2(200);
l_commit VARCHAR2(30);
x_msg_details VARCHAR2(3000);
x_msg_summary VARCHAR2(3000);
x_return_status VARCHAR2(3);
x_msg_count NUMBER;
x_msg_data VARCHAR2(3000);
p_validation_level NUMBER;
v_errbuf VARCHAR2(2000);
v_retcode VARCHAR2(20);
v_released_status wsh_delivery_details.released_status%TYPE;
v_inv_interfaced_flag wsh_delivery_details.inv_interfaced_flag%TYPE;
v_oe_interfaced_flag wsh_delivery_details.oe_interfaced_flag%TYPE;
v_source_code wsh_delivery_details.source_code%TYPE;
v_pending_interface_flag wsh_trip_stops.pending_interface_flag%TYPE;
l_changed_attributes wsh_delivery_details_pub.changedattributetabtype;
l_source_code VARCHAR2(30) := 'OE';
-- Parameters for WSH_DELIVERIES_PUB
p_delivery_name VARCHAR2(30);
p_action_code VARCHAR2(15);
p_asg_trip_id NUMBER;
p_asg_trip_name VARCHAR2(30);
p_asg_pickup_stop_id NUMBER;
p_asg_pickup_loc_id NUMBER;
p_asg_pickup_loc_code VARCHAR2(30);
p_asg_pickup_arr_date DATE;
p_asg_pickup_dep_date DATE;
p_asg_dropoff_stop_id NUMBER;
p_asg_dropoff_loc_id NUMBER;
p_asg_dropoff_loc_code VARCHAR2(30);
p_asg_dropoff_arr_date DATE;
p_asg_dropoff_dep_date DATE;
p_sc_action_flag VARCHAR2(10);
p_sc_intransit_flag VARCHAR2(10);
p_sc_close_trip_flag VARCHAR2(10);
p_sc_create_bol_flag VARCHAR2(10);
p_sc_stage_del_flag VARCHAR2(10);
p_sc_trip_ship_method VARCHAR2(30);
p_sc_actual_dep_date VARCHAR2(30);
p_sc_report_set_id NUMBER;
p_sc_report_set_name VARCHAR2(60);
p_sc_defer_interface_flag VARCHAR2(60);
p_sc_send_945_flag VARCHAR2(60);
p_sc_rule_id NUMBER;
p_sc_rule_name VARCHAR2(60);
p_wv_override_flag VARCHAR2(10);
p_asg_pickup_stop_seq NUMBER;
p_asg_dropoff_stop_seq NUMBER;
x_trip_id VARCHAR2(30);
x_trip_name VARCHAR2(30);
fail_api EXCEPTION;
x_debug_file VARCHAR2(100);
l_ship_method_code VARCHAR2(100);
l_user_id NUMBER;
l_resp_id NUMBER;
l_appl_id NUMBER;
CURSOR c_ord_details IS
SELECT DISTINCT det.source_header_number sales_order,
det.org_id,
det.source_line_number,
det.source_header_id,
det.source_line_id,
det.source_header_type_name,
det.inventory_item_id,
det.requested_quantity,
det.delivery_detail_id,
(SELECT concatenated_segments
FROM mtl_system_items_kfv
WHERE inventory_item_id = det.inventory_item_id
AND organization_id = det.organization_id) ordered_item,
det.organization_id,
det.src_requested_quantity,
det.shipped_quantity,
del.delivery_id,
del.status_code delivery_status_code,
det.released_status pick_release_status,
det.oe_interfaced_flag,
det.inv_interfaced_flag
FROM wsh_delivery_details det,
wsh_delivery_assignments asn,
wsh_new_deliveries del
WHERE 1 = 1
AND det.delivery_detail_id = asn.delivery_detail_id
AND asn.delivery_id = del.delivery_id(+)
AND det.source_header_number = 1199656
AND det.source_line_number = '1.1'
AND det.org_id = 10102
AND shipped_quantity IS NULL
AND NVL(del.status_code, 'OP') <> 'CL'
and det.delivery_detail_id =21439836
/* AND det.released_status = 'Y'*/;
BEGIN
-- Initializing the Applications
SELECT user_id INTO l_user_id FROM fnd_user WHERE user_name = 'MSHAPIRA';
SELECT responsibility_id, application_id
INTO l_resp_id, l_appl_id
FROM fnd_responsibility_vl
WHERE responsibility_name = 'OM Super User - UDS UK';
fnd_global.apps_initialize(l_user_id, l_resp_id, l_appl_id);
FOR i IN c_ord_details LOOP
DBMS_OUTPUT.put_line('Initializing the Application for Shipping Transactions');
-- Mandatory initialization for R12
mo_global.set_policy_context('S', i.org_id);
mo_global.init;
-- Ship Confirming
p_delivery_name := TO_CHAR(i.delivery_id);
DBMS_OUTPUT.put_line('Before Shipping, Calling WSH_DELIVERY_DETAILS_PUB API to Update Shipping Attributes');
DBMS_OUTPUT.put_line('=============================================');
l_changed_attributes(1).delivery_detail_id := i.delivery_detail_id;
l_changed_attributes(1).shipped_quantity := 5;
wsh_delivery_details_pub.update_shipping_attributes(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
p_commit => l_commit,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_changed_attributes => l_changed_attributes,
p_source_code => l_source_code);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
RAISE fail_api;
DBMS_OUTPUT.put_line('Failed to Update the Shipping Attributes');
ELSE
DBMS_OUTPUT.put_line('Successfully Updated the Shipping Attributes');
END IF;
BEGIN
SELECT shipping_method_code
INTO l_ship_method_code
FROM oe_order_headers_all
WHERE order_number = i.sales_order
AND org_id = i.org_id;
EXCEPTION
WHEN OTHERS THEN
l_ship_method_code := NULL;
END;
p_action_code := 'CONFIRM'; -- The action code for ship confirm
p_sc_action_flag := 'S'; -- Ship entered quantity.
p_sc_intransit_flag := 'Y';
--In transit flag is set to 'Y' closes the pickup stop and sets the delivery in transit.
p_sc_close_trip_flag := 'Y'; -- Close the trip after ship confirm
p_sc_trip_ship_method := l_ship_method_code; -- The ship method code
p_sc_defer_interface_flag := 'Y';
p_sc_stage_del_flag := 'Y';
p_sc_create_bol_flag := 'N';
p_wv_override_flag := 'N';
-- API Call for Ship Confirmation
DBMS_OUTPUT.put_line('Calling WSH_DELIVERIES_PUB to Perform Ship Confirmation');
DBMS_OUTPUT.put_line('=============================================');
wsh_deliveries_pub.delivery_action(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_action_code => p_action_code,
p_delivery_id => i.delivery_id,
p_delivery_name => p_delivery_name,
p_asg_trip_id => p_asg_trip_id,
p_asg_trip_name => p_asg_trip_name,
p_asg_pickup_stop_id => p_asg_pickup_stop_id,
p_asg_pickup_loc_id => p_asg_pickup_loc_id,
p_asg_pickup_stop_seq => p_asg_pickup_stop_seq,
p_asg_pickup_loc_code => p_asg_pickup_loc_code,
p_asg_pickup_arr_date => p_asg_pickup_arr_date,
p_asg_pickup_dep_date => p_asg_pickup_dep_date,
p_asg_dropoff_stop_id => p_asg_dropoff_stop_id,
p_asg_dropoff_loc_id => p_asg_dropoff_loc_id,
p_asg_dropoff_stop_seq => p_asg_dropoff_stop_seq,
p_asg_dropoff_loc_code => p_asg_dropoff_loc_code,
p_asg_dropoff_arr_date => p_asg_dropoff_arr_date,
p_asg_dropoff_dep_date => p_asg_dropoff_dep_date,
p_sc_action_flag => p_sc_action_flag,
p_sc_intransit_flag => p_sc_intransit_flag,
p_sc_close_trip_flag => p_sc_close_trip_flag,
p_sc_create_bol_flag => p_sc_create_bol_flag,
p_sc_stage_del_flag => p_sc_stage_del_flag,
p_sc_trip_ship_method => p_sc_trip_ship_method,
p_sc_actual_dep_date => p_sc_actual_dep_date,
p_sc_report_set_id => p_sc_report_set_id,
p_sc_report_set_name => p_sc_report_set_name,
p_sc_defer_interface_flag => p_sc_defer_interface_flag,
p_sc_send_945_flag => p_sc_send_945_flag,
p_sc_rule_id => p_sc_rule_id,
p_sc_rule_name => p_sc_rule_name,
p_wv_override_flag => p_wv_override_flag,
x_trip_id => x_trip_id,
x_trip_name => x_trip_name);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
DBMS_OUTPUT.put_line('Ship confirm has not been Completed For SO => ');
ROLLBACK;
RAISE fail_api;
ELSE
DBMS_OUTPUT.put_line('Ship confirm Successfully Completed For SO => ');
COMMIT;
DBMS_OUTPUT.put_line('Checking the Delivery Status after delivery action API Call');
DBMS_OUTPUT.put_line('==========================================');
SELECT wdd.source_code,
wdd.released_status,
wdd.inv_interfaced_flag,
wdd.oe_interfaced_flag,
wts.pending_interface_flag
INTO v_source_code,
v_released_status,
v_inv_interfaced_flag,
v_oe_interfaced_flag,
v_pending_interface_flag
FROM wsh_trips wtr,
wsh_trip_stops wts,
wsh_delivery_legs wlg,
wsh_new_deliveries wnd,
wsh_delivery_assignments wda,
wsh_delivery_details wdd
WHERE wtr.trip_id = wts.trip_id
AND wts.stop_id = wlg.pick_up_stop_id
AND wts.pending_interface_flag = 'Y'
AND wdd.inv_interfaced_flag <> 'Y'
AND wlg.delivery_id = wnd.delivery_id
AND wnd.delivery_id = wda.delivery_id
AND wda.delivery_detail_id = wdd.delivery_detail_id
AND wnd.delivery_id = p_delivery_name
AND wdd.source_line_id = i.source_line_id;
IF (v_source_code = 'OE' AND v_released_status = 'C' AND
v_inv_interfaced_flag <> 'Y' AND v_oe_interfaced_flag <> 'Y' AND
v_pending_interface_flag = 'Y') THEN
DBMS_OUTPUT.put_line('The Delivery has been Shipped & the Next Step is - Run Interface');
DBMS_OUTPUT.put_line('===========================================');
-- API Call for Submitting Interface Trip Stop
wsh_ship_confirm_actions.interface_all_wrp(errbuf => v_errbuf,
retcode => v_retcode,
p_mode => 'ALL',
p_stop_id => NULL,
p_delivery_id => p_delivery_name,
p_log_level => 0,
p_batch_id => NULL,
p_trip_type => NULL,
p_organization_id => i.organization_id,
p_num_requests => 1,
p_stops_per_batch => 1);
ELSE
DBMS_OUTPUT.put_line('The Delivery has not Shipped Properly');
END IF;
END IF;
END LOOP;
EXCEPTION
WHEN fail_api THEN
DBMS_OUTPUT.put_line('==============');
DBMS_OUTPUT.put_line('Error Details If Any');
DBMS_OUTPUT.put_line('==============');
wsh_util_core.get_messages(p_init_msg_list => 'Y',
x_summary => x_msg_summary,
x_details => x_msg_details,
x_count => x_msg_count);
IF x_msg_count > 1 THEN
x_msg_data := x_msg_summary ||' '||x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
ELSE
x_msg_data := x_msg_summary||' '|| x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
END IF;
END;
But at the stage of updating delivery attributes I get the following error message
Warning: For Delivery Detail 21439836, the following field(s) are not updatable: SHIPPED_QUANTITY.
Why?Hi Paul
Looks like the authorisation is failing due to a bad registration for some reason.
Would you be kind enough to clear out the registration to ensure we are dealing with a fresh start and no information is being used which may have become corrupt. You may do this by following this procedure;
Remove existing reg details
# usr/lib/cc-ccr/bin/eraseCCRRepository
List /tmp/RegistrationProfile.properties file
# cat /tmp/RegistrationProfile.properties
Attempt re-registration
# sconadm register -a -r /tmp/RegistrationProfile.properties
Send us the full output of the commands above if you would please. -
Hi Mac,
Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?
Thanks in advance,
Ricardo ArguellesSordidloam wrote:
So to be clear, this issue occurs on any input with the Denon Receiver. Occurs from both HDMI out and MiniDisplay Port out. Goes away when we reinstall the OS and update it to 10.9.2. Comes back as soon as we update to 10.9.3.
Cheers
MLE
Have you been able to use the Mac Mini directly attached to the plasma/LCD/projector with out going through the Denon AVR? Even with 10.9.3 installed?
I have a Pioneer AVR and I have the Mac attached via a HDMI to HDMI and all is working for me. Can your Denon do some upscaling? Some AVR, like my VSX-53 can change the scaling of the input video. Meaning if I still had my Apple TV 2 which outputs 720P only, can be upscaled in my AVR to 1080i or 1080P or even 24fps. Heck, I could even plug in an old style Red, White, Yellow cable and upscale it to 1080P and output it HDMI.
I am wondering if your Denon is able to do that and it might be set wrong. Check the owners manual for such settings. Even the plasma/LCD/project could be doing the upscaling too. So check that too.
KOT -
All of table results are not showing in universe
Hello, I have a table that I created via a SQL view. I then insert this view/table in a universe. Then when I export the universe some of the fields are not there. I went back to the designer and the fields are listed on the right side pane, but not in the list on the left side pane.
Any ideas why it would drop fields at random?
Thanks
JeffI have just noticed that it seems to be only dropping notes fields. Anyone know why this would be?
Thanks
Jeff -
Recordmode data are not updated correctly
We currently have an issue while using the 3.x data flow in BI 7.0. The same also holds with 3.x versions of BI.
Suppose you have an ODS sending data in an InfoCube. When you initialize the delta process with data transfer then the recordmode field in the communication structure contains null values even though in the change log table of the ODS it has values. This behaviour does not hold when you send further data with deltas.
We want the recordmode data to be updated correctly since we use them in a condition. Does anybody know about this problem?
Best regards
TheodorosHi again,
the problem is also not related with any kind of mapping. We are just sending some data from an DSO to an InfoCube. Recordmode values are maintained correctly in the change log table of the DSO. Nevertheless, they are not updated correctly in the InfoCube's update rules communication structure unless we are uploading deltas. My question is why they are not updated also correctly when we are doing an initialization of the delta with data transfer.
Thanks anyway
Theodoros
Maybe you are looking for
-
Making the move to 16:9, but totally confused about what settings to use!
Hi, It seems to me that since all new TV's being sold are wide-screen, it is time for me to stop making videos in 4:3. But I am completely stumped by the procedure to work in 16:9. I have shot my footage in standard definition, 16:9. The final produc
-
Final Cut won't open project, stops at 0% or 1% while reading project
Smaller projects will open, but all of a sudden this large project (with HVX-200 HD footage) which I've been editing for several months won't open. Final cut opens fine but when it starts to read the project, it never gets passed 2%, and I have to fo
-
Problems With NumericStepper in Flash CS3
Hello Friends, I need a small help. I just strucked up with NumericStepper issue. I have a NumericStepper and i am setting the Minimum value to 0 & Maximum value to 10. Now my requirement is, suppose if the user entered/typed the value which is gre
-
Line graph, How do graph month only on Horizontal axis?
I'm trying to graph year trends by month on the horizontal axis. However, it keeps breaking up the months by adding the year, so I have three separate line trends. How do I fix this?
-
Premiere Pro CC 2014 update and Media Encoder update fail to install
Hi - I've been updating my CC applications. But PP CC 2014 and media Encoder say: "UPDATE FAILED". Naturally I cannot get through to Abobe. Does anyone have a suggestion? Harry