Lg 2.1 last version develop sliders issue help me i'm disperate

Hi
i running photoshop cs3 , now i upgrade to cs4 and lightroom 2.1
on xp pro with the last pachtes
the acr in photoshop cs3 and cs4 is amazing fast
instead the develop module in lightroom 2.1 is very slow , i mean the sliders are not reactive, are stiky
lightroom 1.4.1 is amazing fast
well i upgraded 1.4.1 to 2.1
i run xp cpu 2.8 dual core ,4gb ,2 seagate sata2 in raid , and video card 512mb
is there a cure? i mean for the sliders?
i have in backround only nod32 2.7 and outpost
is there users that have my issue?
thanks

Question 1. I already asked this, Can I removed the Apple default apps?
No. But you can turn off automatic syncing and Push email and set the phone to retrieve mail manually.
Question 2. Can I control the way apps access the data network?
Sort of. Turn on Airplane mode which will disable the cellular modem then turn on WiFi only. With Airplane mode ON and WiFi ON, your phone will only connect to the internet using an available WiFi connection.
I can't find a way to prevent apps from using it or switching to it when my WI-FI drops momentarily.
Apps do not run in the background so they only way an app can attempt to connect is if you have it running. If you do not run the app, it cannot run up your bill. For Apps that have "background" notification, you can turn that option off in the settings for each of those apps.
Question 3. Is it possible for the mobile provider to turn my data network off while leaving the cellular network active?
That is up to your provider. Call them. Go into Settings, General, Network, and turn OFF Data Roaming.
Question 4. I'm trapped in a tough spot, is there something "technical" I can do, that I haven't mentioned bellow? There must be something to elevate the situation.
In the US, you can return the phone within thirty days and void the contract. If you do not have that option, or if you are past thirty days, you can pay the ETF (Early Termination Fee) and void the contract.
I live in a very rural area in the US and I have used all of the techniques listed above at different times. I hope this helps; I "get it" that a huge Surprise! data roaming bill at the end of the month can be upsetting. Try the stuff I listed above and if none of that works, paying the ETF might be cheaper than paying Surprise! bills every month.
Hope this was helpful.

Similar Messages

Screen Flickering using firefox last version

Just noticed my screen was flickering while scrolling any pages.
I tried activating and deactivating the hardware acceleration and stills the same.
Im using firefox last version and this issue doesn't happen with Internet explorer.
I also have problems with flash from time to time where the solution is simple disable it or restart firefox.
I also have flash last version.

For now it seems is gone.
And disappeared after I unistalled Java script and reinstaled it.
Hope it helps someone too.
Thanks.

I am having issues with new version of Final Cut Pro, is there away to download the last version so I can finish my projects?

I am having major issues with the new version of Final Cut x, I have missing clips and my computer is locking up, I need to finish some projects so is there away to go back to the last version before the new update?

Not unless you have saved a copy of the previous version; also, any libraries that you have updated to use in the newer version will not be usable in the older version anyway.
Rather than going back you should try and figure out what is wrong. The current version works great for most users. Start by clearing your preferences: hold down command and option keys while starting FCP X, and confirm when asked. Many different issues can often be solved by just that.
In case it doesn't solve, please provide more detailed information like OS version, Ram, drive and connection, etc

Lightroom 2 develop sliders

Hi
i bought lightroom 1.4.1 and now i'm using photoshop cs4
well lightroom 1.4.1 , i mean the develop sliders are very smooth
and the cs4 (or cs3) acr is amazing blazing fast , again the sliders
i tried lightroom 2 last version on different pc , very powerful and normal pc
i updated every drivers , but the lightroom 2 sliders are not very smooth , are sticky
i tried to delete every preference
now my question
is a problem related only to me , i'm running it under windows xp sp2 and windows xp sp3
or is a general issues
thanks

Hi Victoria,
I have read several of the nVidia tweak notes but they never seem to have the same terminology as the setting that show up when I bring up my nVidia control panel. Here are the global defaults on my system - can you guide me as to which ones I should focus on changing? I have tried many combinations and can't see any significant difference but unsure which ones are really important. I have also customized these combinations such that they are limited to when Lightroom is running but unsure if that feature works or not. Any thoughts would be greatly appreciated.
Anisotropic filtering :: Application-controlled
Antialiasing - Gamma correction :: Off
Antialiasing - Setting :: Application-controlled
Antialiasing - Transparency :: Off
Buffer-flipping mode :: Auto-select
Conformant texture clamp :: Use hardware
Enable overlay :: Off
Error reporting :: Off
Exported pixel types :: Color indexed overlays (8 bpp)
Extension limit :: Off
Maximize texture memory :: Off
Maximum pre-rendered frames : 3
Multi-display/mixed-GPU acceleration :: Multiple display performance mode
Stereo - Display mode :: Use on-board DIN connector
Stereo - Enable :: Off
Stereo - Swap eyes : Off
Threaded optimization :: Auto
Triple buffering :: Off
Vertical sync :: Use the 3D application setting
Jeff

What is the last version of the Apple OS that supports Eudora and Quake III? (I'm at 10.4.11)

Hi There,
I am having vertical line issues with my G4 PowerMac Quicksilver (April 2002).. Red or purple lines and sometimes they connect to the pointer arrow.
I thought it was the graphics card but when I ran the Apple Hardware Test Disk version 1.2.5 it failed at the Logic board, although it's an after market Logic board because one of my (2) 1 gig processors died a few years back so I don't know if the hardware test disk is still valid with an after market Logic board?
Also What is the last version of the Apple OS that supports Eudora 6.2.4 and Quake III? (I'm at 10.4.11)
Thanks for any and all help, I think my time is limited in my old Mac..
Eric

Hi-
I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
I have a tutorial here:
C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
Use Arctic cooling MX-4 compound.
As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
In Tiger, there is a retail driver update that you can try:
http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
No updates needed for Leopard.
Eudora should be fine:
http://lowendmac.com/misc/10mr/mb0910.html#1
Quake is fine. This coincides with my observations:
http://www.insidemacgames.com/forum/index.php?showtopic=31884

HT1766 my iphone 4 is stuck in restore after updating the lasted version. It was working fine before.How do I get it working again?

my iphone 4 is stuck in restore after updating the lasted version. It was working fine before.How do I get it working again?

Hello, fschris.
Thank you for visiting Apple Support Communities.
When experiencing issues updating or restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

I use Mac 10.4.11 Can I get back to the last version of foxfire I was using?

I have been using foxfire on my computer for the past few years. Today I was trying to upgrade and when I did, it took off the old foxfire and then told me it could not upgrade. Now I can't get foxfire at all because it is telling me my system is too old. I use Mac 10.4.11 Can I get back to the last version of foxfire I was using?

Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''<u>and</u>''''' OSX 10.5 or higher (you have version 10.4)
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
'''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Differences Rules Manager actual and last version

Hello,
what is the difference between the actual (Oracle 10.2/11) and the last version (Oracle 10.2) of the Rules Manager?
thanks.

Hello,
Some of the key Rules Manager enhancements for 11g include
- Support for collections and aggregate predicates in rule conditions,
- Support for text predicates in rule conditions,
- Support for shareable rule conditions,
- DELETE and UPDATE support for DMLEVENTS configuration and
- Support for change notification events
You will find more information about these enhancements in the 11g White paper at
http://www.oracle.com/technology/products/database/rules_manager/index.html and also in the Application Developer's Guide.
From the above link, you can also download the new Ajax based Development tool for creating and managing CEP applications in the database. This tool will work with existing 10.2 applications as well. You will find the tutorial for this tool in the Training section.
Regards,
-Aravind.

What is the last version of NUServer64.

What is the last version of

Hi-
I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
I have a tutorial here:
C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
Use Arctic cooling MX-4 compound.
As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
In Tiger, there is a retail driver update that you can try:
http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
No updates needed for Leopard.
Eudora should be fine:
http://lowendmac.com/misc/10mr/mb0910.html#1
Quake is fine. This coincides with my observations:
http://www.insidemacgames.com/forum/index.php?showtopic=31884

Last versions of some components

Hi All!!
I want to know what is the last versions of the next components.
- EBP.
- SUS.
- CCM.
- IPC.
Any help will be rewarded.
Thanks and regards,
Manuel Míguez.

Hi,
For SRM,Currently 5.0. is in implementation.
6.0 is in development with ramp up customers .
For more info on the versions of the individual components in SRM 6.0,you can refer to the Master guide or the below link
https://websmp101.sap-ag.de/~sapidb/011000358700006330942006D
SRM 6.0 ramp up starts in december, and should end in june.
There are some new functional features in SRM 6.0, but also a big technology change: ITS is replaced by Webdynpro ABAP. Also SRM-MDM catalog is delivered instead of CCM.
BR,
Disha.
Pls reward points for useful answers.

Last version of a smartforms

Hi
How can i check the last version of a smartforms ???
I need to check the version between development mandt and productive mandt.
Regards
Gregory

hi gotera,
The ABAP program fills the contents of the Windows through a Function Call as shown .... If this is the thought then Create your own version of Smart Forms. ...
pls chk this
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http:
www.sap-press.de/download/dateien/392/sappress_sap_smart_forms_e.pdf
thanks
sagar
reward me points if usefull

Error 21 and 3004 while restoring iphone 4 - Itunes / IOS last version! HELP!!!

Hello guys, i have an issue restoring my iphone 4... 1 was charging it and suddendly black screen appears.. just with apple logo when i connect charger, when charger is disconnected just black screen.. y though that was battery problem, i bought new one and is already installed.. now, same problem.. y research internet and i found that the solution could be restoring it.. so.. i turn it into DFU mode (Itunes mode) now i just see ituns logo on screen when i connect..
I have last version of Itunes (11.1.4) on my computer and i Had last IOS in my iphone 4.. when i try to restore first of all i see error 21.. i did something for fix hosts file and now i see error 3004..
I really apreciatte if somebody can help me, i don´t know what shall i do..
By the way. my iphone 4 is completely original.. i mean.. not jailbrake
Please help
Thanks all

error 21
https://discussions.apple.com/message/18198103#18198103
erroer 3004
https://discussions.apple.com/message/23878993#23878993
https://discussions.apple.com/thread/4034118

Lightroom v4 last version 64bit devop module slow to load why?

Hi
i have 2 ssd , 32gb , windows 7 64 and lightroom v4 last version 64bit
about the module , why does the develop module load slower compared to the others at least the first load of the program?
thanks

Hi
i have 2 ssd , 32gb , windows 7 64 and lightroom v4 last version 64bit
about the module , why does the develop module load slower compared to the others at least the first load of the program?
thanks

Can't download JINITIATOR Last version

Hello,
I am trying to download the last version of JINITIATOR (1.3.1.25) from the URL http://www.oracle.com/technology/software/products/developer/htdocs/jinit.htm. But the download fail with the message :
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET http://download-uk.oracle.com/otn/nt/jinitiator/jinit13125.exe.
Reason: Document contains no data
It also append on the previous versions.
Please, help me.

I see several reports of download problems from this morning, maybe they had a temporary glitch. Does it work if you retry?

Develop sliders respond really slow

Upgraded to LR 4.2 + Update, and the sliders still works very slow.
I have a machine with 8GB + i7 370K + Nvidia 560 Ti + Dell U2711 (27" monitor).
Any Ideas?
Thanks.

ktgw wrote:
Hi,
My system is running with 8GB of memory and a core i5 CPU.
Lightroom is installed on an SSD drive and the catalog file is located on the same SSD drive as well.
The SSD drive has a lot of space free (at least 10 GB).
I'm using a Dell U2711 monitor (native resolution 2560x1440).
The most interesting thing is that if I adjust lightroom window size, then the development sliders work very fast.
LR is a non-destructive editor that never writes or changes the original file. PS is a destructive pixel editor that also caches multiple copies of the edited file in memory to speedup "undo" image building. PS4-6 supports Open GL, which uses the graphics processor for processing certain image views (Rotate, 3D, etc.). LR and PS work entirely differently concerning onscreen image building, and LR benefits very little by increasing graphics card performance.
A faster system processor will make LR more responsive with a high resolution display, but simply keeping the Loupe image smaller when adjusting sliders in the Develop module will do the same thing. My system is only slightly higher performance (i7-280, 12GB) and I have no issues. BUT my monitor is 1920 x 1080 (~2Mp) versus 2560 x 1440 (~3.7Mp). Your processor needs to build almost twice (2x) the number of pixels every time you make a change in the Develop module. If my i7 system performance is about 1.5x your i5 system, then screen response time will be almost three times faster ( .3 to .5 Sec. versus 1.0 to 1.5 Sec.).Using dual high resolution displays is even more challenging for LR.
Try making the Develop module side panels as large as possible by dragging the border with your mouse, and perhaps increase the height of the filmstrip. Then use CTRL + SHIFT + F Key to enter and exit full screen mode for a larger image review of your Develop setting changes. On my system this takes about 1.0 sec., so this may not be a time saving option for you (i.e. ~3.0 sec.). Give it a try.

Lg 2.1 last version develop sliders issue help me i'm disperate

Similar Messages

Maybe you are looking for