LG 2012 TV with AN-VC400 TV Cam - pathetic support...

All I can say about LG's & Skype's partnership is "Stay Away"!
I bought a 2012 LG TV (LM47640T £800) with their dedicated Skype Cam (AN-VC400 £90) only to find that the week I bought it, the skype software disappeared from the TV. 3 months later, it reappeared. I plugged the camera in, and enjoyed a test call. Then the problems began - now I only get video one way - no one can see us.
So I ring LG. They tell me it is a problem with the software and to call Skype. Skype then tell me it is a problem with the hardware, and to contact the LG. And around in circles we go. Meanwhile, the retailer tells me that they are unable to offer support or a refund as the product worked - if only once.
Stay away from the LG Skype compliant products. Useless support from both LG and Skype. My only course of action is to rasie a complaint with the Office of Fair Trading, as someone else found out in the U.S. I'm not alone - see
http://community.skype.com/t5/Skype-on-your-TV/LG-Smart-TV-47LM6400-Skype-Web-Camera-Issue/td-p/1145...
http://community.skype.com/t5/Skype-on-your-TV/LG-TV-and-LG-Camera-Skype-Video-Issue/m-p/531705
http://community.skype.com/t5/Skype-on-your-TV/skype-for-LG-Smart-Tv-2012/m-p/760878
This technology is potentially brilliant, butif the hardware and software vendors can't work together...what's the use?

I have the same problem and tried everywhere to find a solution - all my devices are up to date with the latest softwares and i still cannot see the video of the calling party! Can someone PLEASE give us a solution to this prominent problem faced by so many LG users!
And for those of you that just bought the LG not-so-smart TV, welcome to hell!

Similar Messages

Camera RAW support 2.2 update and Nikon .NEF unsupported image format

Hi,
I Use a Nikon D2x and only take raw images (.NEF file)
After I update from RAW support 2.1.1 update to RAW support 2.2 update, all my raw image file (.NEF file) taken before 13th September 2006 ! would not display - In the Aperture program, if i navigate to a project / folder and clicked on a thumb nail in the browser, I get a magenta / cyan screen showing in the main viewer panel with unsupported image format. ?
This is my worst-case scenario ! - I have entrusted Aperture with all my digital images (all raw .NEF) images taken before 13th September 2006 are un accessible with camera RAW support 2.2 update installed !
I have deleted (the 2.2 update) “from” System/Library/CoreServices/RawCamera.bundle and reinstall the RAW support 2.1.1 update.
* NOW I can now see all my raw Nikon .NEF images and they are now all fully functional again *.
Their is a problem with the Apple digital camera RAW support 2.2 update, it rendered the Aperture program useless to me for my older .NEF image/files (as above).
This requires a fix ASAP
Martin

Thankfully, I wasn't affected by the issue given I'm currently with Canon. There have been Canon woes in the past though.
On a side note, I never update anything until it has been out for a few weeks just to be sure. Because Aperture is such an integral component of my studio and business, I make sure everything always works before making any updates or changes - including upgrading cameras.
I'm sure the next update will fix the magenta issues.
Best,
CD

I have 2012 iMac with 4 GB RAM. Every time I'm importing vedeo using MiniDV HDV Sony camera, FCP X is importing normally, with 2.5 GB of RAM free. Then, after 10 or 15 min of importing, FCP is frozen, and free RAM is close to zero. What happens?

I have 2012 iMac with 4 GB RAM. When I turn FCP X, I usually have 2.5 RAM free and the program works normally when I edit. The issue is importing video. I use a Sony HDV camera to import from miniDV tapes, and Apple says Sony HDVs are supported. Yet every time I'm importing, it works normally for 10-15 min, then the amount of free RAM quickly (yet gradually) is reduced to almost zero (I used Memory Clean to dicover it) and then FCP X got frozen and I need to force quit it and start all over again, to work for another 15 min. Horrible! What is it?

Are using 10.0.7 (the latest version)?
Memory problems seem to have been alleviated with 10.0.6 and 10.0.7.
Please post the screenshots of Activity Monitor, as Tom asked. This will at least let us see if it is FCP X itself gobbling a lot of RAM or if you are suffering from the problem of OS X not releasing "Inactive Memory" in a timely manner - an issue that has been there for a long time :-(
You didn't mention whether you have the 27" or 21.5" iMac. Unfortunately, in the 21.5" adding RAM is a big hassle. But if you have the 27", then seriously consider upping the RAM. It is quite inexpensive, from the likes of Crucial or other reputable third parties.

I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

When I tried using a recently downloaded (from the App store) version of MtLion 10.8.2 (12C60) I could NOT get the new MacMini to install or boot from a USB I had previously made. I was however able to use the Recovery Mode of the MacMini to create a bootable SSD which I had installed. The problem arose when I went back into Recovery DU as it saw the seperate drives (SSD & HD) as a broken Fusion Drive. Interestingly DU from the boot volume had NO issues and reported NO faults. It was the Recovery DU that identified the faulty Fusion Drive configuration. At this point I am definately out of my depth but my speculation is that the Recovery Volume is being used in some fashion to form the method or pattern that DU assigns files to the drives, System Report sees the drives as seperate volumes with all their individual characteristics.
Disk Utility did not make a bootable USB, I don't have or use CCC or Super Duper.
Here is the longer version I've been compiling:
Having bought a late 2012 Mac Mini(6,2) i7 2.66GHZ with the standard 1TB 5400 HD and 4GB of RAM (base model) I immediately decided to install a Mercury Elite 6g 240GB SSD and up the RAM to 16GB. I received both shipments on the same day and had all my new toys in front of me. After following the video advice on OWC’s website for the installation of the second drive I started the mini and formatted the SSD to accept the OS from Recovery on the original HD. This MacMini shipped with 10.8.2 (12C2034) as the OS, the normal build of 10.8.2 is (12C60). Having used Recovery Disk Utility to format the SSD it came back with an error that DU could’t Repair. I went ahead and installed the OS on the SSD and the Mini booted normally from both drives. The issue I encountered with this setup was that iMovie encountered an “unexpected error” and would not save a completed project. I therefore decided to figure the drive issue out because I suspect the new Fusion File Management software didn’t like my configuration with drives that Recovery DU saw as needing to be “fixed”. After spending some time on the phone with both OWC and Apple Support I took the plunge and used Internet Recovery Disk Utility and allowed both drives to be “fixed” after which DU created a Fusion Drive (Logical Drive) that I then ran Repair Disk on and it showed up as a single drive in DU. It works perfectly as described by Apple’s site:
http://support.apple.com/kb/HT5446
Having checked the Link Speed and Negotiated Speed they both show as 6g so I’m pleased not to have lost performance due to it being fuzed to a 3g 5400 drive. The biggest drawback is that Apple’s Fusion Management only allows for 1 additional partition and I would have preferred more than that.
I have sourced some additional information here:
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.fosketts.net/2011/08/05/undocumented-corestorage-commands/
If anyone has a factory Fusion Drive could you please post the Link and Negotiated Speeds of both drives? This information can be found in Apple > About This Mac > More Info… > System Report > Serial ATA and the drives should show up as discrete drives with their info listed separately.

Can't get OWA to work on Essentials 2012 R2 with Exchange 2013 on second server 2012 R2 std.

I have previously with success setup a working solution with server 2012 essentials, and a second server 2012 std. with exchange 2013, I did it following this guide: http://technet.microsoft.com/en-us/library/jj200172.aspx
Unfortunately I lost the server due to a cooling error which led to an un-repairable essentials 2012, since this was a new setup and also a test setup I didn't have any working backup solution setup at the time...tsk.tsk.
Since I had to make a complete do over I chose to try out the new R2 server editions, and set it up following the same guide, when it came to this part:
Download KB2732764 for ARR 2.5, and then install the update on the server that is running Windows Server 2012 Essentials.
Copy the SSL certificate file for Exchange Server to the server that is running Windows Server 2012 Essentials. The certificate file must contain the private key, and it must be in the PFX file format.
Note
If you are using a self-issued certificate, follow the instruction in the Exchange Server article Export an Exchange Certificate to export the certificate.
Open a command window as an administrator, and then open the %ProgramFiles%\Windows Server\Bin directory.
Based on you installation scenario, follow one of these steps to configure ARR:
If you are performing a clean setup, run the following command:
ARRConfig config –cert “path to the certificate file” –hostnames “host names for Exchange Server”
I noticed that the version of "Application request routing" had changed to version 3, so obviously I didn't need to dl the 2.5 update.. When I came to the part where I wa instructed to run arrconfig config etc. I noticed
that the ARRconfig file no longer where placed where the setup guide indicated, I then went ahead and tried som manual configuration regarding certificates and such. In the end I have a working solution where Exchange and OWA is working locally but OWA isn't
working outside my local domain, the link get's placed in the RWA and is indicating the correct link for the exchange server www.remote.clinten.dk I have a certificate which include to separate domain names aforementioned and remote.clinten.dk and
I get no errors indicating certificate errors, when I try to connect to www.remote.clinten.dk/owa from outside I get a 404 error, and when I connect to www.remote.clinten.dk I get the RWA login screen for the essentials RWA. Obviously I need to set up something
in ISS probably in the url rewrite section, but I can't seem to find the right setting.. Can someone help with this?
Btw. I have found the missing arrconfig file in c:\windows\system32\essentials" and tried to run the command as described in the guide "ARRConfig config –cert “path to the certificate file” –hostnames “host
names for Exchange Server”" but it doesn't seem to work, it just prompts with a guide for using the arrconfig command and examples of correct use, I also tried removing the "" from the guide, like this "ARRConfig
config –cert path to the certificate file –hostnames host names for Exchange Server",
when I ran it without the "" It didn't prompt me with anything nor did It indicate any errors, it did not however make my OWA work either..
I am aware that exchange 2013 atm. isn't officially supported on the R2 server, but the exchange works fine inside my domain, and the pop3/smtp also works from outside, since this Is a test environment, using only my own private domain and not a company
domain I figured it would be ok to run the risk.. ;)

Hi
found this on
https://social.technet.microsoft.com/Forums/en-US/1f099068-b3ed-44f3-a8c4-c22d760a8621/arr-broken-or-bad-syntax-exchange-2013-essentials-2012-r2?forum=winserveressentials
"Ok just an update for anyone else how has this issue.
The problem has been solved by Microsoft and I have included their findings below, but basically it comes down to a typo!
I often use notepad to have all the commands I need on hand, and I must have copied the command direct from the TechNet article or other website and customised the required fields. The issue with this is one of the characters did not “convert” - for want
of a better word. I should have retyped the whole command from scratch and it would have been right!
Thanks for everyone’s input and for Microsoft for getting to the bottom of it.
From Microsoft:
We have tested on your environment and here is the investigation result from our senior engineer:
================================================================
Basically the command fails due to invalid parameter, the invalid one is the ‘-‘. I think the one customer used is copied from the online document sample which translate to the unicode is 0x8211 means “en dash”, it
can’t be input by normal keyboard, so I pretty sure it is from web (mostly HTML document).
The one we check (compare) is ‘-‘ which has the code 0x45.
So it always failed to compare the parameter and ARRconfig.exe thought it is invalid parameter.
The solution is quite simple, just using keyboard to retype the command, using normal ‘-‘ and I have tried the password prompt shows
Best Regards,
Johnny Chen
Microsoft Partner Support Community Technical Support Engineer
Microsoft Global Partner Services"

[Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?

Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li

Disappearing disk space Windows Server 2012 R2 with SharePoint Server 2013 Enterprise

I've got an interesting problem with a virtual machine in our VMWare environment. It is Windows Server 2012 R2 with SharePoint Server 2013 Enterprise installed. I started out with a 60GB disk and it started running out of space, so I increased
it in VMWare and extended the partition to 100GB. Well, that lasted for a bit and so I extended it again. I've done this 3 or 4 times and now I've got a 160GB disk with about 2-3GB of space remaining (and it started with 10GB remaining).
WinDirStat shows 105GB of <Unknown> space being used, which is probably my issue. However, I can't determine what this is and it keeps growing like a tapeworm. The context menu on the <Unknown> files has all the options disabled,
so WinDirStat doesn't appear to have access to whatever the file(s) is/are. I've performed several chkdsk /f on the C: drive and nothing bad is reported. I don't have any restore points and am not running VSS (that I'm aware of). The pagefile
reports as being about 4.9GB, so that's not the issue. No large files are shown anywhere and my explorer settings are set to show me all files, including system files.
When I try to run WinDirStat with elevated permissions, it hangs and becomes unresponsive.
I've even resorted to running CCleaner to see if it found anything, but it simply found the standard temp files and such...about 1GB.
I'm pulling my hair out...and I don't have much to start with. Anyone have any ideas?
Thanks
Russ

It appears that somehow, Microsoft Fusion Assembly binding logging was turned on and many of the temp folders located at c:\users\username\AppData\Local\Microsoft\Windows\InetCache\IE were filling up with hundreds of thousands of Fusion HTM log files.
This is controlled by an entry in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion\ForceLog which was set to 1. Hopefully, setting it back to zero will fix the issue. As a result of figuring this out, I have recovered almost 80GB of disk
space occupied by the log files.
I thought WinDirStat would show me what I needed to know, but it turns out TreeSize (which I've used in the past) works much better.
Russ

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

Where do I find the serial number for my free LR 5.6 that came with my new Leica camera?

Where do I find the serial number for my free LR 5.6 that came with my new Leica camera?

It's normally on the disk packaging. A 24 digit number commencing:
1160-xxxx-xxxx-xxxx-xxxx-xxxx

My iphon 5 said "only compatible sim cards from a supported carrier may be used to activate iphone. please insert the sim card that came with ur phone or visit a supported carrier's store to receive a replacement sim card" what do i do???

my iphon 5 said "only compatible sim cards from a supported carrier may be used to activate iphone. please insert the sim card that came with ur phone or visit a supported carrier's store to receive a replacement sim card" what do i do??? i leave in diferent country now!!!???(((

in many countries to make phones seem less expensive
carriers pay most of the phones price for the customer
but this come at the cost of the phone only being able to work
with the carrier this is called a sim lock
the only people who can remove a sim lock is the carrier which
the phone is sim locked to they been doing it like that for at least 20 years

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem with my new camera? Will upgrading elements to a newqer version solve the problem?

NEF's for the D7100 should work with the latest version PSE13
You can download here and try free for 30 days:
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 #

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid

Try a new post in the 10.5 Installation forum.
DALE

Reporting Service Error Code 7403, on SCCM 2012 R2 with SQL 2012 SP1 CU6

Dear All,
I am facing issue to install Reporting Services Point on SCCM 2012 R2 with SQL 2012 SP1 CU6. getting error messages id 7403. please let me know if SQL 2012 SP1 CU6 is supported with SCCM 2012 R2 or not & if you have any solution on it.
Error Message: The report server service is not running on Reporting Service Point server "SCCM2012"; start the service to enable reporting.

I am getting below error msg when trying to browse both sites
1) For Reports
The report server cannot decrypt the
symmetric key that is used to access sensitive or encrypted data in a report
server database. You must either restore a backup key or delete all encrypted
content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from
HRESULT:
0x80090016)
2) For Reportserver
Reporting Services Error
The report server cannot decrypt the symmetric key that is used to access
sensitive or encrypted data in a report server database. You must either restore
a backup key or delete all encrypted content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from HRESULT: 0x80090016)
SQL Server Reporting Services

LG 2012 TV with AN-VC400 TV Cam - pathetic support...

Similar Messages

Maybe you are looking for