LG 42LH40 tv - how to hookup to home stereo receiver / speakers

Want to play my new LG 42LH40 thru my home stereo receiver / speakers. There are only a few plugs and I think I have tried them all. Any
H E L P would be GREATLY appreciated. Thank you , Roger
Solved!
Go to Solution.

Thanks in advance for your help. It is just an older Pioneer receiver with 2 Pioneer speakers. It is only 100 W per channel X 2. I mainly just want to play
thru stereo when I put the television on the sirus satellite radio stations or movies. Had a much cheaper tv before , but was able to just plug in 2 wires
from the receiver to the televison and play thru stereo when I wanted to. Apparently this tv does not have that capability which I find hard to believe.
Any help 'IS' appreciated. Roger

Similar Messages

Hooking up iPod to home stereo receiver?

Hi, all. I just bought my first iPod, a classic. I wanted to hook it up to my home stereo receiver, an NAD made back in '88. It has inputs for phono, tape, CD and video.
I went to my local Apple store and told the sales person I wanted to hook up my iPod to my receiver. He sold me a Belkin cable that goes from the headphone jack on the iPod to the RCA inputs on my receiver. Only problem is, I can't figure out how to make it work. So far I have questions:
1. Which input should it go into--tape, CD or video?
2. How loud should I set the volume on the iPod?
3. Do I need to do anything with the "settings" such as the EQ or "clicker"?
Sorry if this question has been asked and answered a dozen times in the past month. I ran some searches here before I posted. Thanks in advance for your help.
Regards,
John

iBod wrote:
1. Which input should it go into--tape, CD or video?
Whichever one makes the most sense for you (and is free to use). I'm assuming all the inputs are identical apart from the labelling to match the input selector on the front of the unit.
Hi, iBod, thanks for your answers.
The only thing I'm still unsure of is the assumption that all the inputs are identical in terms of the voltage or amperage that they can accept. For example, I know that the phono input is designed for a signal that needs preamplification and the tape input is designed for a signal that doesn't. I'm not sure about the CD and video inputs, and what I want to avoid is having the iPod damage the receiver with too much amperage or voltage or whatever.
Anyone know for sure?
Regards,
John

How can i connect my Imac sound to my stereo receiver speakers and not disconnect the computer's speakers?

I find lots of confusing answers re how to connect my Imac to my stereo receiver, and I aldso want to avoid cutting of the Imac's speakers entirely when the sound goes to the stereo receiver and thsu to the larger speakers. Is there a way to switch between them, or can i keep them running simultaneously, which is what I'd really prefer? What do i need to go to Radio Shack to purchase?
FYI, I have a 27" desktop Imac purchased 3 months ago, running Mountain Lion, and the receiver I want to connect to is an Onkyo TX-8050, wityh lotys of available ports in back - digital, universal, ethernet, and many rca ports "in."

I think this should work, although the description doesn't appear to cover this use. Call Griffin to confirm.
FAQ's
http://www.griffintechnology.com/support/imic
http://store.griffintechnology.com/imic
http://www.jr.com/griffin-technology/pe/GRF_GC16035/

How to connect to home ster

I recently purchased a Belkin Y audio cable for my Zen Vision M and connected it to my home surround sound receiver. As soon as I connected it, the music started playing but the screen went off. Does anyone know how to keep the screen on when connected to a home stereo receiver? Do I need a different cord?Thank you!

no possibility to enter private weave server.

IPod Clas. 80GB - What kind of dock to connect to home stereo (Audio only)

Hi Everyone,
I've been reading all sorts of threads about problems people have been having with the iPod classic (80GB) and dock compatibility. Do you have any recommendations for docks that will actually work ($50-$100 range)? I'm not that technologically savvy. I'm looking for the following:
*Dock to connect the iPod Classic 80GB to a home stereo/receiver
*Audio only - _no video/TV views needed_
*Charges the iPod while connected to the dock (without falling asleep as I hear they often do)
*Remote control (not critical to have the remote but it would be nice to have one that performs minimal actions such as volume control, on/off, skip to next song, etc.
Thanks so much for your help.

I assume that the other Sound Blaster cards like the Audigy models also have a 3.5mm jack for digital input. Has anyone tried feeding a coax SPDIF signal into it's And if so, how did you make the connection?
I am really stumped here. I bought the X-Fi specifically for use of its digital input capability. I would have gone with the next higher model which comes with the 5 /4" bay panel (and standard coax SPDIF jacks) but my PC does not have a 5.25" bay available.

Wireless music playback from iPhone via home-stereo

I want to listen to my music, playing on my iPhone, using my home-stereo as speakers.
I'm looking so to speak for a wireless iPhone-Dock, or a wlan/bluetooth-receiver with audio out (and matching app), or a airport-extreme that syncs with my iPhone.
Is there a device that can do this?

I just bought Belkin's Bluetooth Music Receiver (F8Z492) and it works just fine when I want to listen to music using iPod or Spotify on my iPhone. I can change tracks but my problem is I can't figure out how to adjust the volume. It seems like using bluetooth is the same as using the iPHone connector in the bottom of the phone - it only send the sound without the volume info and you need to adjust the volume on your stereo. Anyone have input if that is the case or not?

Streaming iTunes music to home stereo

Hi! I'm trying to stream my iTunes music to my home stereo receiver; doesn't have to be wireless, wired is fine. Here's the catch: I'm using NAS and two notebook computers...the iTunes music doesn't live on either notebook, only on the NAS drive. I want to be able to access the music without having to turn on a computer.
Is there a device that I can attach to my stereo receiver and the network that will let me access the music files from the NAS drive? Having a heckuva time with this, any input is most appreciated!

Sorry, I missed the bit about wanting to not use a computer.
Try this -> http://www.slimdevices.com/pi_overview.html
You still need a server running but you don't use the computer to access it.

Multiple users, devices & Apple IDs in the house. Can we, and how would we, use Home Sharing?

We have three users in the house, each with their own Apple ID, using multiple mac/PC devices. Can we and how would we use Home Sharing to share music, apps, etc?

Do you have a computer. You can't share music or apps from one mobile device to another. To share photos you need to use photo stream shared albums.

How can I use home sharing between our iphones (create playlists from both accounts at once)

How can I use home sharing between our iphones, so that we can create playlists with songs from both of our libraries? We share a Macbook Pro (separate accounts) and each have the new iphone, but when I have my iphone and try to create a new playlist, I can only grab songs from one account. Is there a way to create a playlist using both accounts since we are sharing?
Does it have to be created within iTunes first on our Mac?

The short answer: because Home Sharing isn't designed for sharing apps, and apps aren't designed to be shared.
The longer answer: Think of it like this...
You download some music in iTunes. With Home Sharing, another user can listen to it by streaming it over the network. But the data itself is on your computer. If you turn off the computer or take it off the network, the other user can't access it.
But if you send another user the app, they aren't just streaming the data- they installed it on their iOS device. Because they weren't the one that purchased it, such a transfer could easily be considered "piracy" or "stealing," and nobody likes that (least of all, Apple).
When iTunes sees this app, it obviously recognized it, as if saying, "Hey, how did you get this app on your device, if I have no record of you purchasing/downloading it from the iTunes store?"
post edited to correct spelling errors

How to change the "home" computer for a iPod touch 3G (iOS 4.2.1) and an iPad 2(iOS5)? Music library has been already moved to iTunes on the new computer.

I have a iPod Touch (3rd gen) that has not upgraded it's OS beyond iOS4.2.1 even if I have tried connecting it into iTiunes I have a iPad2 which has been recently upgraded to iOS5 . Both were connected to a laptop computer that my husband will take with him when he moves to a different city. I will most probably buy a second laptop sometime, but meanwhile I want to tether my iPod touch and iPad 2 to my desktop PC for now. Before I took the plunge, I had a few questions which I am hoping this forum will help me answer
1. How to switch the Home PC for these devices? I have already transfered my Music library on to my Home PC and then downloaded and reorganised with iTunes. Since I am reorganising the library anyway I don't minding removing all my music from the iTouch and set it up from scratch for the music. However, I removed all musci from theiTouch, changed it to manual mode and connected it to the desktop- It's detecting it fine- but it still is not the home computer for the iTouch- everytime I try to put new music in it- it is deleting everything old- I can't see the same controls as I see from the laptop at all- how to rectify this? To I need to set this up as a new iPod (restore route)?
on the touch I have very few apps and don't care about them. on the iPad I do have a couple of valuable apps that I want to hold on to- so have n't tinkered with it at all- what is the smoothest way for thsi transition? The iPad doesn't have any music on it at this time, but what to do if I want to transfer some?
2. Is there a way I can store the organised iTunes info in any way- like I said I might buy a new laptop in a few months but do not want to reorganise my iTunes over agaoin- it' a fairly large collection most of which is n't purchased from the iTunes store.
3. Why sin't my iTouch 3G upgrading- it's stuck on iOS4.2.1 but iTunes doesn't show any updates- even with chck updates button iTunes show that it is a current version.
thanks for reading through and any help that I can get to sort this mess out.

The recent release of iBooks 1.2.1 has corrected the problem of the missing Dutton edition of Winnie-the-Pooh. It may have been there with the previous install of iBooks but it would never display in the bookshelf. After updating iBooks to 1.2.1, the Dutton version (the one included with iBooks) suddenly appeared on the bookshelf. So it was a software glitch after all and not a fix Apple chose to document explicitly in the update.
Message was edited by: Rick Lang

How do I setup home sharing on my new ipad

How do I setup home sharing on my Ipad ? I just installed an Apple TV and want to display content. Thanks

Once sharing is set up for both devices, go into the Music or Video App, and look for the Air Play icon .
Tap it to get a list of devices you can send content to, one should be your Apple Tv.
Tap it to select it and start plaing anything you want. It should show up on the Tv.
http://support.apple.com/kb/HT4437
If you want to stream content from your computer, then setup Homesharing there, and then use the "Computers" Tab on the Aple Tv menu screen to access the shared library.

How do I get home video clips from iMovie Mac to iMovie iPad? Surely there is some degree of cross-compatibility? I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move. Any ideas?

How do I get home video clips from iMovie Mac to iMovie iPad? Surely there is some degree of cross-compatibility? I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move. Any ideas? (The clips are in a .mov format, they have been imported / converted into this format in iMovie, original files were from a JVC camcorder in some other strange format.)

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

On iTunes 11, how can I access home sharing if the music is from a CD? Is there any way I can download these songs if (A) I no longer have the CD, or (B) I do not want to pay $25 a year for iTunes Match?

On iTunes 11, how can I access home sharing if the music is from a CD on a different computer using Home Sharing? Is there any way I can download these songs if (A) I no longer have the CD, or (B) I do not want to pay $25 a year for iTunes Match?

Yes, you can copy songs that you ripped from a CD to your Home Sharing computer.
Turn on Home Sharing first on both computers. To do that, go to File > Home Sharing > Turn on Home Sharing. Enter your Apple ID and password.
Now go to your computer that you want to copy the songs to and connect to your Home Share. You can do that by clicking on the popover button located at the left top corner right below the play control buttons. Click on it and scroll to the bottom until you see your Home Share and select it.
Go to Music in your Home Share. Select the songs that you want to copy in your Home Share and click Import at the bottom right corner.

How do i use home.html in the first Jboss example

how do i use home.html in the first Jboss example? i got the example to work through the command line method. i also got the CD example to work.
the documentation does not tell you how to use the home.html file. the file suggests that i can call the servlet because it has this line:
<form action="InterestServlet" method="POST" >
from my knowledge of servlets, i should be able to put the home.html file in the same directory that the servlet is in, and as long as a web browser can access it in that location, then this should work... right?
can someone tell me specifically what they did to get it to work? i CANNOT FIGURE OUT what the servlet URL is. my first guess would be http://localhost/servlets/InterestServlet . This doesnt work. Does anyone understand where i am coming from??
I am using ANT, and the normal install of the latest JBoss. i do not have a web server running because the JBoss server says in the console "[INFO,WebService] Starting
[INFO,WebService] Started webserver with address: null port: 8083
[INFO,WebService] Codebase set to: http://thor:8083/
[INFO,WebService] Started" and so i assume there is a web service there?????

ADDENDUM:
i still cant figure out my servlet question, so please help, if you can.
i just figured out that i need to download the JBoss Tomcat/Catalina server. I got it running except that the Catalina web server only is working when i run it standalone, and i cant figure out why. It keeps throwing this exception:
[INFO,EmbeddedCatalinaServiceSX] StandardHost[localhost]: MAPPING configuration error for request URI
[ERROR,EmbeddedCatalinaServiceSX] HttpProcessor[8080][4] process.invoke
java.lang.NullPointerException
at org.apache.catalina.valves.ErrorDispatcherValve.status(ErrorDispatcherValve.java:280)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:163)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1011)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1106)
at java.lang.Thread.run(Unknown Source)

TS1629 How do I use home sharing with direct TV / Verizon internet. I have turned on Home sharing on apple tv and in iTunes but can't see the library in apple tv. I can see the photo stream but thats it. Any Ideas????

How do I use home sharing with direct TV / Verizon internet. I have turned on Home sharing on apple tv and in iTunes but can't see the library in apple tv. I can see the photo stream but thats it. Any Ideas????

go to home-sharing on Apple TV and type in your info as ask.
hope this help

LG 42LH40 tv - how to hookup to home stereo receiver / speakers

Similar Messages

Maybe you are looking for