LG Blu ray Burner in sata Enclosure

Hi , I have bought an LG H20N blu ray burner and fitted it into a sata enclosure in the hope that i could run it using the sonnet SATA cards i have in 2 of my macs.
Unfortunately no joy, the finder doesn't recognise ot and nor does toast
does anyone have any ideas ?
al

Hi and welcome to Discussions,
OSX and thus Disk Utility does not support burning of Blueray discs at the moment.
To my knowledge only Toast with the Blueray plugin can burn Blueray discs.
Regards
Stefan

Similar Messages

Blu ray burner options?

Hi Everyone,
I am looking to get an internal Blu Ray burner for my Mac Pro but sadly I realized that the internal connection is PATA. OWC offers a wide variety of Blu Ray burners but all the internal ones are SATA. Does anyone know if an adapter exists to make this work? Or should I give in and maybe go for an external FireWire 800 model?
I do have Windows XP SP2 installed via Bootcamp and whatever model I get would need to be recognized in both platforms. I'm just having some trouble understanding this high definition technology.
Suggestions? Please
Rio

Hi Malcolm,
Thanks for the link. Very useful info and solution. In the meantime I found an MCE Blu-ray burner but I'm not sure if it would be a better solution that the one you have provided. This one is quite expensive and I don't know this company's credibility. Here is the address:
http://www.mcetech.com/blu-ray/#osxcompat
I wonder if it would be a better investment to get the adapter you suggested and get a SATA Blu-ray burner which could, if needed be inserted into an enclosure if I wanted to use it externally with another computer in the future. Would the speed be affected by using it externally?
Rio

DVD & Blu Ray Burner Drive Trays Do Not Stay Open When Media is in the Drive

I have a problem with both Windows 8/8.1 and the Windows 10 Technical Preview (there is no issue when I run Windows 7).
I have 2 optical drives: 1) DVD Burner and 2) Blu Ray Burner (I just got the second drive a few weeks ago). They are attached to the secondary SATA Chip (see below for specifics).
The problem I'm having is that when I eject media from either drive, the drive does not stay open, but rather immediately closes. Before I got the Blu Ray Burner, I had this problem with just the single DVD Burner by itself. I was hoping when I installed
Windows 10 Technical Preview that this problem would not be present, but it is present in that O/S as well.
This problem will repeat continuously if I attempt to use the eject button and so I either have to grab the disc while the tray is moving, or if I press the eject button again on the drive at the right time, I can get it to re-open and not close (this
is tricky to get the button timing right as it seems like it has to be done close to when the drive tray is fully extended when it starts retracting). It usually takes me 5 to 10 button presses to get it to stay open. Sometimes it will stay open for about
0.5 to 1s before it closes again, but most of the times it just immediately closes. I also have the same problem if I use the software eject feature by right clicking on the drive and choosing eject.
Of course, the expected behavior is that pressing the eject button should open the tray, but not close it immediately allowing you to remove the disc.
Here is some background information about my system and how the drives are connected:
1. Motherboard: Gigabyte GA-EP45-ED3P Revision 1.0 LGA 775
2. Interface (for both drives): Gigabyte SATA II Chip - 2 x SATA 3 GB/s connectors (GSATA2_0, GSATA2_1) supporting up to 2 SATA 3 GB/s devices
3. Memory: 8 GB (4 x 2 GB)
It should be noted that I tri-boot between Windows 7, 8/8.1, and 10 Technical Preview and that this issue is not present in Windows 7, but has always been there in Windows 8/8.1 and now it is present in 10TP as well.
I've had this system for just over 6 years now and it is still going strong. It should be noted that I have both drives on the secondary SATA chip (as identified above), which is meant to be used with removable SATA devices.
Since the problem exhibits itself in both Windows 8/8.1 and 10TP, a reinstall of the O/S will have no affect on this problem and so this appears to be some other issue that is consistent between Windows 8/8.1 and 10TP.
I'd appreciate your support in looking at this issue - thanks!
Matt Caspermeyer
P.S. I also submitted this feedback through the Insider Program.
Matt

Hey Zagayer,
Thanks for using Apple Support Communities.
As you now have two optical drives in your Mac Pro, you need to be able to choose which drive to eject. That is built into the system. You just hold the Option key while tapping eject for the 2nd drive.
OS X Mountain Lion: Eject a disk
http://support.apple.com/kb/PH10613
If your computer has two optical drives, hold down Option-Media Eject or Option-F12 to eject a disc from the second drive.
Have a nice day,
Mario

Want buy blu-ray burner for T410s

I would like to buy a blu-ray burner for my T410s.
Of course it has to have drive height of 9.5mm.
It should be able to burn double-layer DVDs DVD+R DL *.
It should be able to burn double-layer blu-rays BD-R DL with a speed of 2x or better.
If anyone has a definite information on the specs of such a drive, I would appreciate letting me know.
Thanks
Tom
*Note, there is a difference between DVD+R and DVD-R.

If I remember correctly, there was a T400 Blu-ray burner - quite expensive at the time - that should work. The T61 version would not work, as it would have had a PATA not SATA. I don't think it is made any longer, but there could still be some aorund.
T61p, T400
formerly x23, x40

Whats the best but cheapest blue ray burner for G5 june 2004?

whats the best but cheapest blue ray burner for G5 june 2004?
any links to uk website or the suggest a name and i'll look it up

This one for sure...
Backwards compatible to SATA 1.5Gb/s or 3Gb/s systems.
http://eshop.macsales.com/item/Western%20Digital/WD5002AALX/
UK...
http://www.amazon.co.uk/WD-Caviar-Black-WD5002AALX-internal/dp/B004DMFAJ2
Jumper settings...
http://wdc.cu

Installing Pioneer BDR-205 Blu-ray burner as internal optical drive?

Has any one successfully installed the Pioneer Blu-ray BD-205 as an internal optical drive in their Mac Pro 1.1? I just wanted to make sure the older Mac Pro would be compatible with the new Blu-Ray burner.
Thanks,
John

I have a MacPro 3,1 with a NVIDIA GeForce 8800GT graphics card, and a Pioneer BDR-203 mounted internally via the internal SATA connector on the motherboard. Works beautifully for burning Blu-ray video, using Toast 10, and I use it to backup AVCHD files that are as large as 16GBytes each.
Would I be able to play Blu-ray video with Windows 7 on this system?
I had about given-up on Apple, and was ready to bite the bullet, and buy a Dell.

Replace W520 Sony Optiarc AD-7710H DVD Burner with Sony Optiarc BD-5750H Blu-ray Burner?

I am planning on replacing the DVD burner which shipped with my W520 (4270CTO) with a Blu-ray burner. Evidently not all W520s ship with the same drives.
Does anyone know whether the front bezel on the W520 is the same for the two Sony Optiarc drives mentioned above? If not, which Blu-ray burners can accept the W520 front bezel from the Sony Optiarc AD-7710H, which is the drive my machine shipped with?
Thank you!
W520, Intel QM67 Express Chipset, i7-2760QM, 1000M NVIDIA GPU 2GB DDR3, 1920x1080 FHD LED, 16GB Corsair Vengeance PC3 12800, Intel Centrino Ultimate-N 6300, Samsung 840 Pro 256GB SATA 3 SSD, Sony Optiarc BD-5750H Blu-ray Writer, Dual-Mode DisplayPort.
Solved!
Go to Solution.

I think you swap the bezels. I did with mine.

Install an internal blu-ray burner on a 24' iMac 2.4 Ghz

Been trying to find an internal blu-ray burner drive to install on my 24 inch iMac 2.4. Does anyone know of an internal drive I can use. Thanks all.

Get a Panasonic UJ-235 (SATA) or UJ-225 (ATA). I installed one in my 27" iMac. It works like it came from Apple. Any 12.5 mm slot loading optical drive will work in an iMac, but the best option is the UJ-235. Your best bet on finding one is on ebay as they aren't redily avaliable for retail purchase as they are mainly for oem aplications. Wait, check to see if you optical drive is sata or ide, if it is ide you can't use the UJ-235, it will take the UJ-225. the way to check is in the sytem information. Look under ATA, if it is your current superdrive will be listed there adn go with the UJ-225. then check serial-ATA, if the suoerdrive is listed there then go with the UJ-235. Toast will burn a bluray, makemkv will rip one, and Mac BluRay palyer will play it. You can do a decrypted rip an clone a commercial blu ray with MakeMKV and toast. But there is no reson to do that because the blank double layer discs are more expensive than buying the movie. Also Handbrake is now bluray ready, you have to do a decryted rip first. But you can make a m4v file that is much better than ones you purchase on itunes. itunes only has them in 720p right now but you can make them in 1080p with handbrake, and incrase the bitrate. Granted, it will take about 12 hours with the 2.4 dual core intel, but it will do it. I have the 3.4 i7 with 32 gb of ram and it takes about 3 hours. I heard a 12 core mac pro can do it in 20 min, so long as the ram is maxed out at 96 gb. But my set up ran about $4,000 and the mac pro set up like that will push $10,000.
Really, your best bet is to use a full speed external through firwire 800 or usb2. The read and burn speed is determined by the drive anyway and those fullsized drives are so much faster than laptop internal drives that the iMac uses.

Slow boot after connecting Blu Ray to motherboard SATA port

I have installed a Blu Ray burner (LG GGW-H20L) in the upper bay. It is connected directly to the lower SATA motherboard port. My 112D is in the lower.
All is working well (except have to use Finder burn instead of Toast for BD burns) apart from really slow boot up times.
I have tried SMC reset and PRAM reset.
Any ideas?
BTW I was pleased to be able to connect to the SATA port without taking out the fan assembly etc etc for anyone thinking of doing this.
Message was edited by: Mike Boreham

The "problem" was the the SATA-USB cable adapter I had been using previously when trying out the LG as external. I had left the adapter plugged in and powered up but not connected to anything. As soon as I depowered it fast boots restored!

Internal Blue Ray Burner

Any suggestions on the fastest blue ray burner for my Mac Pro?

hi shenkoa,
Welcome to Lenovo Community Forums!
Here you can opt to get these
and are compatible to your model
http://www.ebay.com/itm/For-Lenovo-B560-B575-G470-G580-SATA-BD-ROM-Blu-ray-BD-Combo-Drive-Replacemen...
http://www.mydvddrives.com/replacement-for-lenovo-g580-sata-bd-rom-blu-ray-combo-drive-75388
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Premiere Elements 11 no longer recognizes my external blu-ray burner.

I have used my Samsung SE-506BB-TSBD external burner many times before today, but for some reason Premiere Elements 11 is not recognizing it. Windows 7 sees it just fine. Premiere Elements 8 (which is still loaded on the same computer) also does not recognize it.
What do I need to do? Samsung's website is no help, but I have a feeling it's an Adobe issue since Windows 7 still recognizes the drive.

rbcourter
When is your Blu-ray burner not recognized
Premiere Elements 11: burn to DVD disc, burn to Blu-ray disc, burn to AVCHD on DVD disc, or all?
Premiere Elements 8.0/8.0.1: burn to DVD disc, burn to Blu-ray disc, or both?
and when you wrote:
I have used my Samsung SE-506BB-TSBD external burner many times before today
Did "....many times before today" imply that you could use the burner for Premiere Elements 11 and 8.0/8.0.1 before. I am trying to get a whether this is a "it worked before but now" or a "it never worked before" type issue.
Do you have the USB 2.0 cable connected to a USB 2.0 computer port directly or via a USB multi port hub? I take it that this burner does not have AC support? If you are using only 1 USB 2.0 port, can you set up the burner for 2 USB 2.0 ports?
Does the computer involved have an internal burner? Or is this the only burner that you have available to you external or internal for the computer?
Let us start here and then decide what avenues of further troubleshooting are available to us.
Thanks.
ATR

I don't see a blu-ray icon in the destination window of my Final Cut Pro app even if I have an LG blu-ray burner connected

I have a MACBOOK PRO running under 10.9 and 4 Gigs memory. I bought FCP to be able to burn blu-rays videos (I produced a 4h30 video on a trip to Turkey)
My video is produced in full HD. I have an LG blu-ray burner. I bought training videos on FCP at Macpro Video and they show that going on SHARE and selecting ADD A NEW DESTINATION will bring a window where should be an icon of a blu-ray disc. But I don't see any blu-ray icon there. My burner is the model BP40NS20

Thanks Tom! Yes, I have the french version. Then, is there a something to do to correct it.

Final Cut Pro X witch Blu-ray Burner are you using ...

Using a Mac Pro Tower like the Mac Pro 2012 or similar what are the Blu-ray Internal Burners do you use ; LG or Pioneer , witch Model Number.
Creating Blu-ray on the Mac is fantastic but witch brand and model numbers for the Big Mac Pro Tower are you using with exellent results now.
On the Mac Apple Pro Apps or Roxio Toast Titanium are the only left options who are current and updated , but burners specified for Windows.
Frustration come when you talk to Apple they say not supported , Burners makers LG or Pioneer will say we dont offer support on the Mac.
Well if you can create Blu-ray on the Mac but cant get any help to burn it it is very frustrating and Not So Pro if Apple care for the Pro Users.

I use the new Mac Pro 2013. Final Cut Pro X version 10.1.4 and Maverick OS 10.9.5. An external Blu-ray burner LG BE14NU40. I've use single burn Blu-ray discs from brands like Maxell and Verbatim. That works fine. I have double layers Blu-ray discs not tried. I use it for home video’s.
DVD single works fine too. DVD double layers I have not tried but will also work i think. Reviews on LG USA stated that Roxio Titanium with corresponding plugin works.
I'm glad I found a blu-ray burner that works with FCPX. Compressor 4.1.3 but I have not been working with the LG burner. Not yet!

Pavilllion HPE H8-1234 Blue-ray Burning?

Using a H8-1234 for import and DVD burning from a Sony Handycam that uses the HD AVCHD progressive format, I was able to burn a standard disc but not one in HD when trying to use the AVCHD format. Not much point in having a HD camera if you can't burn a HD DVD. Is the Supermulti burner in this PC not able to burn a disc in HD? If not can I just install another burner in place of the Supermulti? Also I would like to be able to burn Blue-ray disc's; is that possible and how?
BTW the Sony "Play Memories Home" software with the "Expanded Feature" works perfectly for importing and editing from the camera. They also offer a "BD Add on Software" to support the burning of the Blue-ray but I have not installed because I need to find out if the rest of my system is capable.
Hope someone can help
Randy

RRRaider, welcome to the forum.
Here is a guide to help you determine if your drive will burn HD. Personally, I couldn't find any data that states it is possible.
If the burner is will not burn in HD, you certainly can install a Blu-ray burner in its place.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

FCP 7 "Share to blu-ray" burn issue.

This may not actually be a FCP issue, but possibly some of you here are experienced in the matter.
Firstly, my video is 1080/24p ProRes.
This is my first jump into Blu-ray, and I'm quickly learning the many work-arounds, but have run in to a problem.
Initially I tried exporting a QuickTime with "current settings", and dropping it in toast and encoding/burning.
Video looked pretty good, but it was choppy. Google tells me this seems to be a common issue with toast and 24p.
Most suggest encoding with Compressor and then burning with Toast.
Tried that, but I couldn't get it to just encode the files and that be all. It kept asking for a blu-ray disc and ejecting the drive, as if Compressor was going to burn it?
When I would choose "cancel burn", my only option, the whole batch would fail. After all that encoding time...
Wasn't too depressed, because after digging more, Google also told me that many believe the h264 encode using the "share" function in FCP produces better results. Though the options are non-existent, it did great. My only complaint is you are forced to convert audio to .ac3. Well that *****.
So I went ahead and exported all the audio from IN and OUT markers as .aiff.
This is where my problem arrives..
I threw the h264 and aiff in Toast, chose "never re-encode", and it burnt fine.
Video looks great, no stuttering. But the AUDIO! It slows drifts out of sync...
Video is an hour long, and at about 20 minutes in, it's 1-2 seconds behind, and goes from there.
Why would that be?
Any experience with this?
I checked, and the ac3 that FCP made, and the aiff are the EXACT same length.
Any thoughts? Or any other work-around for keeping audio lossless?
Thanks!

Thanks for the reply, Johnny.
I wasn't saying AC3 s*u*c*k*s. And really.. Why is that word censored? I didn't do that.
I was saying it ***** that you ONLY have the option of AC3 with the "Share to blu-ray" feature.
And yea, I'm sure I would never know the differene, and especially not my grandparents with their home movies.
But it just seems d*u*m*b (can I say that?) to be going through all this trouble for a "lossless" lineage, ie. HD camera, FCP, Blu-ray burner/player, and have to compress the audio. Isn't that one of the main advantages of blu-ray?! Quality? Wether we can detect it or not?! Ha!. Okay..
I thought an easy workaround would be to export the audio to AIFF and drop it in.
No idea why it's drifting....but yes, in the end i may settle.
Though I'll feel cheated! Guess that's what I get for loving BOTH Apple and Blu-ray....
If anyone has other processes of getting good 24p to Blu-ray, please share!
Thanks again.

LG Blu ray Burner in sata Enclosure

Similar Messages

Maybe you are looking for