LG Cosmos 2 constantly in "call state" and "data session"
I have had my LG Cosmos 2 for a little over a year, and starting this summer my battery began losing life and I noticed that two icons were constantly on my home screen, "In Call State" and "Data Session" I called Verizon several times and ended up resetting my phone entirely. This ended the problem for a while, but over the last two weeks it has been happening again. Now my battery doesn't last a day, I lose calls, and I am annoyed!
I have data blocked from my plan because I don't use the phone for anything accept for texting and phone calling. I have also attempted to restart my phone, take battery out, update software and roaming capabilities...nothing works. Please Help!!
Sorry about the trouble with your battery vzineedhelp & 0asis. SuzyQ did have some helpful suggestions, but I have an idea on what may be the cause to these ghost data and voice sessions. If you have a data block on your account but at some point previously enabled features on your phone like Backup Assistant or Daily Scoop. These programs will attempt to run in the background and may sometimes even seem to wake your phone up without you touching the device because it's trying to (unsuccessfully with the data block in place) connect to data.
You can turn off Daily scoop messages by simply removing the Data Block by logging into www.vzw.com/spamcontrols and selecting "Manage Service Blocks" then following the steps below:
Launch Daily Scoop (Media Center > Daily Scoop)
Select Menu > Options > Verizon Msgs
Choose 'Off' and 'Save'.
Repeat the same procedure for Menu > Options > Bonus Msgs
Backup Assistant is a little trickier since it's pre-installed on the Cosmos. So if it's been set up or the activation was attempted and is trying to communicate with the network, follow the steps at http://bit.ly/Tf0lIo to reset Backup Assistant while the block is in place.
Once you've ended the Daily Scoop messages and reset Backup Assistant, log back into www.vzw.com/spamcontrols and re-add your data block if you'd like to continue it.
Keep me posted if you need additional assistance.
JenniferH_VZW
Please follow us on Twitter @vzwsupport
Similar Messages
-
Questions on Xontrol--H​ow to update the state and data
Hello, everyone. I am new to use the XControl. I don't understand how the program in the facade update the "state" and "Data" after we click the button. I cannot do that, please give me some help on the XControl.
My vi is in the attachment.
Message Edited by McArthur on 03-24-2010 02:19 AM
Working...
Attachments:
Button.zip 51 KBMcArthur wrote: Now I understand the reason why the state can not update, because I didn't do as TCPlomp mentioned. It seems working now....
I mentioned this too, however without a pretty picture.
quote:
When you modify data or state, you need to update the action cluster to indicate that fact.
McArthur wrote: The example is just a dummy, not really make sense.
The example is really quite good and shows these things too as well as many other important points. Please try to fully understand it.
I would strongly advise you to also look at my other suggestions. You still haven't explained the purpose of the xcontrol. I am still curious.
LabVIEW Champion . Do more with less code and in less time . -
5c is activated and live on Verizon. Call, txts, and data. Issue is that 5c thinks that is is NOT activated - keeping getting pop up warnings. Operationally this prevents me from using v-mail via iPhone app - i need to dial Verizon directly. This phone is new and activated yesterday. Any ideas?
Contact Verizon to troubleshoot the issue with them.
-
Hi, every one:
Here's my question of my day - >>>
I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K, and
I got a web service up and running called Price Update web service through
which user can pick up a price and push a deal to another web service
called: deal service, the deal service will take the user deal and book the
deal ( sending a JMS message to a Queue, a MD will pick up and do the work,
then send the confirmation to another JMS Queue ), then the confirmation
will be picked up and sent to another web service , called: User Deal
Confirmation Service, here's the question:
1. Since the client application is only allowed to see its own confirmed
deals, how I can make the confirmed deal encrypted based on a server
generated key or the session id that client application provides
2. Now, I have 3 webservices: update, deal and confirm, each of them has a
client.jar file available - from the client application point of view, do I
need all these 3 client.jar, or I just need one of them ?????
3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
beta, you can do this easily in the workshop, in the second question above,
I think I need some how relate the confirmation to the client conversation
id ??
thanks a lot for the input, have a nice day.
regards,
mark.Any comments ?
mark
"markhu" <[email protected]> wrote in message
news:[email protected]..
Hi, every one:
Here's my question of my day - >>>
I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K,and
I got a web service up and running called Price Update web service through
which user can pick up a price and push a deal to another web service
called: deal service, the deal service will take the user deal and bookthe
deal ( sending a JMS message to a Queue, a MD will pick up and do thework,
then send the confirmation to another JMS Queue ), then the confirmation
will be picked up and sent to another web service , called: User Deal
Confirmation Service, here's the question:
1. Since the client application is only allowed to see its own confirmed
deals, how I can make the confirmed deal encrypted based on a server
generated key or the session id that client application provides
2. Now, I have 3 webservices: update, deal and confirm, each of them has a
client.jar file available - from the client application point of view, doI
need all these 3 client.jar, or I just need one of them ?????
3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
beta, you can do this easily in the workshop, in the second questionabove,
I think I need some how relate the confirmation to the client conversation
id ??
thanks a lot for the input, have a nice day.
regards,
mark. -
Hi everybody - kinda new here. I was hired at a web design company last year and have recently taken to learning ColdFusion - so I'm not 100% on the syntax. I always need help with if statements, so I'm hoping you guys will be willing to spread some knowledge.
Anyway to put this in context:
What I'm working on is a Calendar that allows you to register to attend an event, such as a corporate dinner, holiday party, or some such nonsense. It also processes ticket purchases through a 3rd party such as PayPal, and would look something like this when put on a web-page.
Here's the code that creates that display.
<table class="registerTablePrices" cellspacing=5>
<cfloop query="registration_types">
<cfif registration_types.esl_price gte 0>
<tr>
<td class="formlabel" nowrap>#registration_types.estName#:</td>
<td><cfinput name="regType_#registration_types.estid#" style="width:30px" value="0"/></td>
<cfif registration_types.esl_price is 0>
<td class="formlabel"> X Free</td>
<cfelse>
<td class="formlabel" style="width:90px"> X #dollarformat(registration_types.esl_price)#</td>
</cfif>
<td class="labelInfo">Enter number of attendees for this type.</td>
</tr>
</cfif>
</cfloop>
</table>
All the code says at the moment is to display events whose price is positive, or else list them as free.
Here is what I want - I want to make it so that the May 30th Late Registration will automatically be hidden if the date is BEFORE or AFTER May 30th.
I have assigned values to the registration types that I want to restrict by date...
They are registration_types.estStartDate and registration_types.estEndDate
AND the value that designates it as Restricted, registration_types.estRestricted - which would be used like this.
<cfif registration_types.estRestricted is 1>
* Then only show it between registration_types.estStartDate and registration_types.estEndDate
And that's where I run into my problem. I can't make it work with the first code you saw:
<table class="registerTablePrices" cellspacing=5>
<cfloop query="registration_types">
<cfif registration_types.esl_price gte 0>
<tr>
<td class="formlabel" nowrap>#registration_types.estName#:</td>
<td><cfinput name="regType_#registration_types.estid#" style="width:30px" value="0"/></td>
<cfif registration_types.esl_price is 0>
<td class="formlabel"> X Free</td>
<cfelse>
<td class="formlabel" style="width:90px"> X #dollarformat(registration_types.esl_price)#</td>
</cfif>
<td class="labelInfo">Enter number of attendees for this type.</td>
</tr>
</cfif>
</cfloop>
</table>
I'm going to have at least 4 special conditions going on at once and I lose it there.
If you read all that I'm sorry, it may be hard to fully understand - I appreciate any help.I wasn't sure what you wanted to do. Perhaps, this:
<cfif (registration_types.esl_price gte 0)
or (registration_types.estRestricted is 1 and ((current_date ge estStartDate) and (current_date le estEndDate)))>
You can also compare the dates using dateCompare().
<cfset current_date = dateFormat(now(), "mm/dd/yyyy") />
<cfloop query="registration_types">
<cfif (registration_types.esl_price gte 0)
or (registration_types.estRestricted is 1 and ((current_date ge estStartDate) and (current_date le estEndDate)))>
#registration_types.estName#:
<cfinput name="regType_#registration_types.estid#" value="0"/>
<cfif registration_types.esl_price is 0>
X Free
<cfelse>
X #dollarformat(registration_types.esl_price)#
</cfif>
Enter number of attendees for this type.
</cfif>
</cfloop> -
Synonyms on call? and Dates (iWork 06)
is there an easy way go get Synonyms or a Thesaurus in pages?
I like editing in pages but in Mac word all you have to do is right click and there are a list of Synonyms and when clicked on insert instead of the current word.
Is this option available in pages instead of trawling through dictionaries of key commands then command v & command c ETC?
Also how do you get the little th to appear after a date is entered?
like 19th <~~ how do i get the "th" to go small like in word
Message was edited by: Steel box
Message was edited by: Steel boxIf you go to System Preferences > Keyboard & Mouse > Keyboard shortcuts, you can add a shortcut for an application. You must select Pages as the application, then type in the exact name of the menu command (Look Up in Dictionary and Thesaurus). Then you can type in a shortcut of choice. I used shift+F7, which is the shortcut in Word.
-
Undefined symbol error when calling stat from extproc
Hi, I'm trying to call an external procedure written in C that calls stat, and am getting the following error. Note that we have other extprocs running, and we are on Oracle 8.1.7 on redhat 6.2...
SQL Error: ORA-06520: PL/SQL: Error loading external library
ORA-06522: /tmp/extproc.so: undefined symbol: stat
OS/compiler
Linux enchilada 2.2.14-5.0 #1 Tue Mar 7 21:07:39 EST 2000 i686 unknown
gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)
Oracle version: 8.1.7
added following lines to file plsql/demo/extproc.c:
(at top of file)
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
(inside UpdateSalary function)
struct stat mystat;
stat("/tmp/foo", &mystat);
reported error:
SQL Error: ORA-06520: PL/SQL: Error loading external library
ORA-06522: /tmp/extproc.so: undefined symbol: stat
NOTE: when I remove call to stat, procudure runs properly.
nullI've talked to support, and this is supposedly a problem with Oracle not recognizing the library path. It is supposed to be fixed in 8.1.7.1.
-
Apps are in "waiting" state and battery always reads 100%
After ios5 upgrade, many apps are constantly in "waiting" state and cannot be accessed.
Also, battery indicator us stuck at 100%.Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
This is really getting old, no help from Verizon. Service was great 2 years ago now it sucks, Constantly dropping calls, dead areas where there used to be fine. What is verison doing to help this???
I have an iphone 5s, my husband has a casio, my sister in law has a Samsung, my friends have various phones we are all experiencing the same thing – dropped calls, no service and it is outside as well as inside the house or the car. At our residence and along the drive to work or to the store. I don’t text much or use my data much so I am mostly concerned with the telephone service.
Every day may not be good, but there's something good in every day. Author Unknown
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator -
Unlimited calls to United States and Canada
I have had unlimited calls to the United States and Canada for years and have faithfully paid my premiums.
I would like to know why I cannot make a call to a Canada phone number? Have you changed the way it is done? If so I would be so appreciative of being notified and shown how.
LaDell Hollenbeck
*edited for privacy*sassie wrote:
Have you changed the way it is done?
No change. +1 xxx xxx xxxx
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
I am working to create and test an integration to Cisco ICM 8.5 connected to an Aspect Unified IP CTI interface. The solution will recieve agent and call events from Unified IP and consume them to understand the state of activity and available agents for the purpose of ICM making inbound call routing decisions.
To facilitate testing I would like to know how to (or if I can) access a real time report that reflects the agent and call states based on the events recieved from Unified IP.Hi,
certainly. Do you have access to the ICM Admin Workstation/Historical Database Server? There's a Microsoft SQL Server running there, containing the real time tables you're looking for.
G. -
CAD Real Time Stats show NA for agent state and call log
Hello
For our lab uccx, the agent/users CAD display shows NA for the agent state and call log. I have
Not Ready and Log out codes set and have the testers do those actions to generate data.
I have rebooted the server and have also checked the services page and confirmed
all the services are running.
I went through the admin guide to see if I missed any configuration but does not appear so.
I tried launching the real time stats tool from the UCCX Admin and it launches OK
but I noticed that it shows not connected.
Note this is over a VPN to the UCCX.
So not sure if this is related. I checked the relase notes and this is the base install
of UCCX 8.5. I am going to install the service updates but wanted to see if I can
get this running before I schedule a maint window to do the upgrades.
Thanks
Mike KanaHi
you might be facing an issue where " uccxcaduser password" gets corrupted , which leads to the issue you are facing right now
you have to contact TAC to reset that password for you and your issue will be fixed ,100%
Note : Only TAC can reset this password -
My Curve 9360 is constantly disconnecting calls and freezing up
It will disconnect when I try making calls or when I am on a call, even when I gave 4-5 bars. I had to resort to finding a landline to finish what should have been a 2 minute call. And it freezes up. I have to remove the battery to get it to work again. I haven't had the phone 2 months yet! There has been no water damage at all. I am at my wits end! Help, please!
AnaisLily1969Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Alternatively, given how new the device is to you, you may instead wish to seek formal support and evaluation for a possible hardware defect.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I just purchased Ipad2 64GB + 3G. It does not stae on the box, whether this is for AT&T or Verizon. I called Apple, and was told that it is not "carrier specific." Was told that I should return, and get one that is set up for one or the other. Are there any advantages to not having a specific carrier? If I keep this one, how do I get 3G service, will it be offered directly from the Ipad like with the carrier specific ones? These are all questions Apple couldn't or wouldn't answer for me. Thanks for any help!
Whoever you spoke to was wrong or misunderstood the question. The iPad is most definitely carrier-specific when it comes to Verizon vs. AT&T. The Verizon model is specific to the CDMA network Verizon uses, and will work with only Verizon. The AT&T model is a GSM, technology used by many carriers around the world, so in that sense the "AT&T" model is not carrier-specific. A Verizon model will not work with AT&T and vice-versa, so you do need to have the iPad model for the carrier you wish to use.
I believe the Verizon model will say either "Verizon" or "CDMA" on the box, so if yours doesn't, you probably have the GSM/AT&T model, but I'm not certain. Perhaps someone else here can confirm.
Regards. -
How to call statement's execute function to execute procedure in Oracle?
I made a very simple procedure in oracle logged as internal user.
the procedure as the following:
create or replace procedure temptest
as
begin
insert into indextab(idx) values(100);
commit;
end temptest;
in Java program,I use Oracle's jdbc driver to connect database, still connect as internal user.
I can call statement.executeUpdate("insert into indextab(idx) values(100)"). and 100 row was added in database.
then,I delete this row, try to run procedure in java,
but the call of statement.execute("temptest") throw a exception
the error message is:"java.sql.SQLException: ORA-00900: invalid SQL statement"
then, I write the same procedure in sql server.
all things work right.( I use jdbc-odbc bridge connect to sql server database)
who can tell me what's the reason?
I'm so urgent, please help me as soon as fast, thank you very muchInstead of a Statement object, use a CallableStatement. CallableStatement is the JDBC wrapper for a stored proc. JDBC requires that the vendor specific call be wrapped in a {CALL ....}.
So, your code would look like the following:
Connection con = some connection;
CallableStatement cs = con.prepareCall("{CALL temptest}");
cs.execute();
Take a look at the Javadoc. You can set both IN and OUT parameters using a CallableStatement.
Maybe you are looking for
-
Need Acrobat 9 pro install/download files
Over the years, my group has purchased Acrobat 7 Pro, 8 Pro, and 9 Pro... I have serial numbers for all of the above listed in my My Adobe/My Products area. I have disks for both 7 and 8 pro... Unfortunately, when our purchasing agent bought 9 pro,
-
My new 2013 27 inch iMac restarts 3 or 4 times a day. Any ideas of what's wrong?
This is the crash report: Anonymous UUID: 82051E3F-93EE-993F-35B4-26DCDDF413F6 Sun Jan 19 16:53:50 2014 panic(cpu 0 caller 0xffffff80162dc19e): Kernel trap at 0xffffff80162365ba, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0x00
-
Define path in selection screen to write the output file to pres. server
Hi can anyone tell me how to declare a variable so that the user can specify his own path name in the selection screen to store the output file in the presentation server. and please tell me how to link up the output file to the selection screen spec
-
ModelReference value used as a key with output_text
I think that it would be good to enable the use of the modelReference value as a key with output_text, through an additional attribute. Example : instead of corresponding to the actual description of a product, the modelReference value would be the k
-
Dear users, I Have a couple of questions. 1) Is there a way to find the list of custom developed (Z* or Y*) programs executed in the background in a specific period? 2) Given a function module name, is there a way to find the list of programs using i