LG G3 horrible after Lollipop. roll back?

Is there an option to roll back to the old version? I don't have the time (or patience) to hear from Verizon UNLESS they're providing me with the ability to roll back. Things were great for me before and now it's just horrible. Too many things wrong to list, just let me roll back!!! Thank you.

There is no ability to roll back.

Similar Messages

After downloading service pack 1 for Windows 7 Firefox did not respond anymore (I got the startscreen, but could not do anything, it "hang"), after a roll back Firefox did work again: are Firefox and SP1 incompatible?

After implementing SP1 for Windows 7 Firefox "hang"(I got the startscreen, but could not do anything: no response). After a roll back removing SP1 Firefox works again.
I installed SP1 also some months ago and had the same problems, also then this was solved also by a roll back removing SP1.
Does Firefox have problems in combination with SP1? How to solve this? Thanks.

Followed the given advice: installed SP1 again, ran Firefox in safemode, disabled other running programs as mutorrent, still Firefox didnt work. I had internetconnection (after restarting mutorrent this did work, the app telling me what the weather outside is worked) but no Firefox: as previous time I got the start screen, but could not browse the internet.
I also tried to start the Internet Explorer and it also looked as if that application had problems (but that can also be because I did not use it for a while - old version or whatever - and it is not my standard browser).
Have again performed a roll back in order to remove SP1, now Firefox works again.
If somebody has advice it would be very welcome!

Workprocess getting restarted after DB Roll back

SAP Version : 4.7 EE
Database : DB2 UDB
OS : AIX
I have an error reported by end user saying Workprocess are getting restarted when he is running a Transaction when i checked the system log and therafter the Workprocess Log I have observed the following , I have also found the heap memory is getting full and at the same time the DB is doing a rollback, can somebody explain if this is only cause of the heap memory or its Db problem over here , attached below is the Log
Thu Feb 4 03:30:55 2010
WP has reached abap/heaplimit = 40894464 bytes
Thu Feb 4 03:33:20 2010
SelMemClass: heap quota (DIA) exceeded 2000000000 2000002464
Thu Feb 4 03:33:23 2010
TH VERBOSE LEVEL FULL
RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
RABAX: level LEV_RX_VMIT_CLEANUP entered.
RABAX: level LEV_RX_VMIT_CLEANUP completed.
RABAX: level LEV_RX_ROLLBACK entered.
ERROR => Call to DbSlRollbackDB6 while DBIF already active in DbSlExeReadDB6*[dbsldb6.c    514]
***LOG BZY=> unexpected return code 1          calling DbSlRollba [dbcon#9 @ 2932] [dbcon   2932 ]
***LOG BYJ=> database function ROLLBACK   for connection R/3        failed [dbcon#9 @ 2935] [dbcon   2935 ]
ERROR => DISTRIBUTED_TA_FAILED:
[dbcon.c      1649]
0: name = R/3, con_id = 000000000 state = ACTIVE      , perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ
***LOG R39=> ThIRollBack, db_rollback ( 016384) [thxxhead.c   12637]
in_ThErrHandle: 1
ERROR => ThIRollBack: db_rollback (step 4, th_errno 18, action 2, level 1) [thxxhead.c   9723]

Karthik,
We hit the exact same problem when activating an APO integration model in ECC last week. It looks like an SQL statement that returns a very large result set is executed. While the result set is fetched the ABAP heap is exhausted. Since no more memory is available the ABAP engine abruptly cancels the execution and begins error handling. The database interface rejects to execute a ROLLBACK statement while the SQL statement is still active. As the rollback fails the task handler restarts the SAP work process and no ABAP short dump or job log entries can be written. We first attempting to resolve this problem by changing
+abap/heap_area_dia + to 4GB->8GB->12GB. However, finally, the solution that worked for us was to cleanup the change pointers and reactivating the integration model with 4GB heap.
Regards,
Sameer

After lollypop upgrade I can no longer transfer files from LG g3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

After lollypop upgrade I can no longer transfer files from LGg3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

That is definitely odd, grantcool. Let's help restore this important data transfer feature. To confirm, when you connect the USB cable to your phone and computer > Pull down the Notification Bar > Select USB Connected > Can you choose Media Sync (MTP) ?
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Error message after downloading and install rolled back (using up data limit)

error message after completing install of trial. then program was rolled back. I do not appreciate using up data allotment unnecesarily, people.Thanks for any assistance.

Rhumsike which Adobe software or service are you trying to install? Also which operating system are you using? Finally what is the error message which you are receiving?

Container transaction NOT rolled back after a long period of time.

Hi, I am using Weblogic 6.1SP5 on RedHat 7.1 and I have seen an unexpected
          behaviour with an MDB and I would like to know if there is any circumstance
          in which a transaction is not rolled back automatically by the container
          after the transaction timeout specified on MDB descriptor expired.
          The fact is I have seen a thread locked for 3 entire days without any
          exception being raised (the trans timeout was set to 900 seconds for
          debugging porpouses)
          Sadly I didn't thought on issuing a ps -ax and a netstat -np in order to see
          if there was any connection active for any of the JVM threads.
          As an aside note I had to throw a kill -9 to Weblogic's JVM in order to
          completely stop it because using the standard "stopWeblogic.sh" script it
          got stalled.
          The only unusual thing that I can think of the MDB is doing is opening a
          connection against a remote system via a socket.
          My question is. Is it possible that a thread locked on I/O (in this case a
          socket) to be out of control in terms of throwing at it a "Transaction
          rolled back exception"?
          I have modified my code in order to set SO_TIMEOUT on the socket just in
          case the other peer hangs and never returns control. But I would like to
          know the problem could be there.
          I know for sure that at the time the thread stalled the other peer died
          (exceptions on other MDBs trying to connect to remote system) but I expected
          a "socket exception" to be thrown by the O.S. to the stalled thread instead
          of having the thread waiting forever on that "open" socket.
          Thanks in advance.
          Ignacio.


While a tramsaction may be rolled back at the transaction timeout,
          the thread is not stopped. The actual exception won't occur until
          the MDB completes. If the MDB doesn't complete (as in this case),
          you won't get the exception.
          "Ignacio G. Dupont" <[email protected]> wrote in message news:[email protected]...
          > Hi, I am using Weblogic 6.1SP5 on RedHat 7.1 and I have seen an unexpected
          > behaviour with an MDB and I would like to know if there is any circumstance
          > in which a transaction is not rolled back automatically by the container
          > after the transaction timeout specified on MDB descriptor expired.
          >
          > The fact is I have seen a thread locked for 3 entire days without any
          > exception being raised (the trans timeout was set to 900 seconds for
          > debugging porpouses)
          >
          > Sadly I didn't thought on issuing a ps -ax and a netstat -np in order to see
          > if there was any connection active for any of the JVM threads.
          >
          > As an aside note I had to throw a kill -9 to Weblogic's JVM in order to
          > completely stop it because using the standard "stopWeblogic.sh" script it
          > got stalled.
          >
          > The only unusual thing that I can think of the MDB is doing is opening a
          > connection against a remote system via a socket.
          >
          > My question is. Is it possible that a thread locked on I/O (in this case a
          > socket) to be out of control in terms of throwing at it a "Transaction
          > rolled back exception"?
          >
          > I have modified my code in order to set SO_TIMEOUT on the socket just in
          > case the other peer hangs and never returns control. But I would like to
          > know the problem could be there.
          >
          > I know for sure that at the time the thread stalled the other peer died
          > (exceptions on other MDBs trying to connect to remote system) but I expected
          > a "socket exception" to be thrown by the O.S. to the stalled thread instead
          > of having the thread waiting forever on that "open" socket.
          >
          > Thanks in advance.
          >
          > Ignacio.
          >
          >

How to continue a loop after roll back callee a Transaction in SOA

Hi All,
I Have main bpel process which calls a external web service which returns set of records,
iiterate through the set, i need to store the each record in AQ Topic.
and ack each and every record after storing them in AQTopic. if the Ack fails i should roll back the previously inserted record from AQ.
I Divided the XA transaction into two parts by using "checkpoint();" .
Based on the ack status i called throw activity with Rollback transaction, i handled that using catch all in same scope.but after that process is terminating not iterating through the loop.
i used XA Datasource.
please suggest me.
Thanks Rajashekar.

Hi PuneetRekhade,
Thanks for your suggestion.
After receving the ack=sucess, before storing the Record in the AQ if system crashes Data would no longer exist in Either AQ or external web service Data base .
the Record shouldn't be lost at any cost.
in my case, if the system crashes before sending the data to AQ, nothing happens because i wouldn't send the ack to the External web service.
Thanks
Raj.

Further woes after rolling back to 4.9

So after wasting my last weekend with the install of 5.0 and the subsequent roll-back to 4.9 I now find that 4.9 will no longer import songs. I just get:
"Error occurred while converting the file "<file name in here>. An unknown error occurred (-14002)"
Anybody else seen this? I'd do anything to avoid another weekend clearing up another iTunes disaster.

good man, Brod. okay, we can proceed on two different fronts here.
b importing fixes
let's try throwing the standard advice on importing problems at the beast:
Andrew Doe, "trouble importing the first song of all my CDs" #15, 06:55am Aug 28, 2005 CDT
http://docs.info.apple.com/article.html?artnum=93453
also head to Windows update to check to see if you're up to date in that regard. the following references might also be useful:
http://docs.info.apple.com/article.html?artnum=300252
toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
b temporary workarounds
hmmmm. is there a specific reason why you need mp3s? can you get away with AAC?
if you need mp3s, can you still import as mp3 udsing WMP?
can you try an experimental import into itunes using a lossless format? then switch your importing preferences back to mp3, right-click one of the lossless tracks, and select "convert selection to mp3". do you still get the same conversion error, or can you get mp3s via the two-stage procedure in itunes?
love, b

Roll Back the Sales Order After Adding

Hi Experts,
I want to roll back the system form trasaction like Sales Order. After adding the Sales Order immediately i want to roll back the transaction.
I used the Company.Transaction Object, but it is only working on User Tables. Not in System Forms like Sales Order.
Can you please tell me the solution for this ASAP.
Thanks in Advance,
G.Suresh

Hi Petr,
You didnt get my point. In my concern is, i am going to add Sales Order by Manually not using code.
In FormDataEvent of the Sales Order
            Select Case BusinessObjectInfo.EventType
                Case SAPbouiCOM.BoEventTypes.et_FORM_DATA_ADD
                 If BusinessObjectInfo.ActionSuccess = True Then
/***** This Code for getting current transaction of the Sales Order *****/
                        Dim oObject As SAPbobsCOM.Documents
                        oObject = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
                        oObject.Browser.GetByKeys(BusinessObjectInfo.ObjectKey).
/**** here i want to rollback the saved sales order ****/
                End If
              End Select
Can you tell me, how i ll rollback the already saved transaction which added by user from Sales Order Screen not in code.
Thanks in Advance,
G.Suresh.

Why doesn't Migration Assistant recognize my backup disk after rolling back to Mountain Lion from Mavericks?

I rolled back my OS from Mavericks to Mountain Lion and now the Migration Assistant isn't finding my Time Machine backups. Any idea why this is?

One reason may be a different computer name. Check System Preferences > Sharing and make sure your computer name has been the same through all your various OS X iterations.

TS3212 Itunes 10.7 Rolls back installation after attempting to install on Windows Vista 64bit.

I downloaded the version in this link, presumably for Vista 64:
http://support.apple.com/kb/DL1577 . It goes through the process but rolls back the installaion and reports "error in installation". I turned off kaspersky Suite but got the sam emessage. Any ideas?

To clarify, I already have iTunes 10.6. Also, I just checked back on the iTunes installer (the manual one) and it now says: "iTunes Installer Completed
The installer encountered errors before iTuens could be configured.
Errors occurred during installation. Your system has not been modified.
Please run the installer again, or click Finish to exit."

Problems even after rolling back to 8.0

My 2nd generation shuffle was working fine (for the most part). Then I updated to iTunes 8.1 and noticed the exact same problems that everyone else is noticing, namely that syncing was completely broken. (http://discussions.apple.com/thread.jspa?threadID=1937971 for details) So I decided to roll back to iTunes 8.0 by deleting iTunes and restoring version 8.0 with Time Machine. I had to use an old version of the library, but it wasn't a big deal.
The problem now is that now my Shuffle syncs play counts with iTunes, but not the order that music is loaded on the iPod. I put music and podcasts on in the order I want to listen to them (I plan hours worth of music for very long runs in advance), and everything looks OK in iTunes, but then when I detach the iPod and go to listen to it, all the podcasts are lumped at the beginning, then all the music is in order alphabetically by artist, regardless of the order I'd arranged them. Then when I plug the Shuffle back in to the dock, iTunes shows everything in this same undesirable order.
I've used the "restore" option several times to wipe the iPod and start over, but it doesn't seem to want to listen to the order in which I arrange things. Anybody else experience anything similar?

Well, I cant help you there, but I was wondering how you restored the ipod back to 8.0 using Time Machine...do you have to download Time Machine? Or should it be on my itunes playlist? Sorry to change the subject, I just havent been able to resolve the issues Ive had with 8.1.
Thanks!
Katie

Roll back process after certain time limit

Hi All,
I am using Oracle 11g. I am calling one stored procedure (MainProc) from my application. Through this procedure I am calling internally three more procedure (Insert recordProc1, InsertRecordProc2 and DeleteRecProc).
The third stored procedure (DeleteRecProc) is taking more than 5 minutes. But if these process crossings more than 5 minutes, have to stop the process and roll back all three stored procedures functions.
I don’t have any commit statement inside of these stored procedures. But I have EXECUTE IMMEDIATE Inside of stored DeleteRecProc.
Help required: Help me to make a counter / Timer. I have a parameter, which has the assigned time limit. How to check whether the process crossing the time limit? How to stop the process and call Rollback?
Thanks in advance.
Manian

Don't know if this helps your situation.
http://docs.info.apple.com/article.html?artnum=301579
here is the entire thread
http://discussions.apple.com/message.jspa?messageID=1237801#1237801

IMac freezes after 10.5.7 update, should I roll back?

I avoided doing the 10.5.7 combo update because my son's Macbook had issues with it. But I finally caved and, of course, now wish I hadn't.
When iMac goes to sleep, the power light glows normally, but when I press a key to bring it back, everything goes dead. Have read a lot on here about this and tried resetting PRAM and repairing permissions, neither of which has worked. The only thing I can think of to do is keep the sleep function on Never, which doesn't seem too healthy.
iMac is also almost five years old. Wondering if I should roll back to 10.5.4 which is what I had, and, if so, how to do it?
Also, I've downloaded the Safari update, which I know won't run on that, so would I even be able to get the old Safari back? Or has anyone figured out a surefire fix for this sleep issue?
Thanks,
Joanne

Hello Joanne:
A suggestion - reset the SMU:
http://support.apple.com/kb/HT1767
If that does not help, let me try to answer your questions.
Wondering if I should roll back to 10.5.4 which is what I had, and, if so, how to do it?
If you have Time Machine, use that (a copy before the problem). If you do not have TM (or a bootable clone) the way to go back is to do an archive and install:
http://support.apple.com/kb/HT1710
Also, I've downloaded the Safari update, which I know won't run on that, so would I even be able to get the old Safari back?
The archive and install will do that. By the by, Safari 4 should run just fine on your system. It is faster than Safari 3.
Barry

Roll Back SCOM 2012 R2 after deploying Cumulative Updates

Hi,
I updated my SCOM 2012 R2 Environment into CU2 and I need to roll back this CU2 into the previous version CU1.
Is there any way to do the roll back to any previous version of CU?
Thanks,
Khaled

You should refer to http://support.microsoft.com/kb/2929891/en-us which provide uninstall information
To uninstall an update, run the following command:
msiexec /uninstall PatchCodeGuid /package RTMProductCodeGuid
Note In this command, <var>PatchCodeGuid</var> is a placeholder that represents one of the following GUIDs.
Collapse this tableExpand this table
Patch Code GUID
Component
Architecture
Language
{D6943F32-41C0-4252-B216-4EE6867F74FB}
Server
AMD64
EN
{1D38FCF3-DDB1-4810-B747-898E7FCCC57B}
Gateway
AMD64
EN
{3FF0B1F5-9A92-4544-A311-6CCFE552BD0F}
WebConsole
AMD64
EN
{033805E7-9FBA-45A8-B9E0-DEF1395D0E63}
Console
AMD64
EN
{4A2BA6B7-9A24-46FA-A379-1ABD74E576AB}
Console
x86
EN
Additionally, <var>RTMProductCodeGuid</var> is a placeholder that represents one of the following GUIDs.
Collapse this tableExpand this table
Component
RTMProductCodeGuid
Server
{C92727BE-BD12-4140-96A6-276BA4F60AC1}
Console (AMD64)
{041C3416-87CE-4B02-918E-6FDC95F241D3}
Console (x86)
{175B7A24-E94B-46E5-A0FD-06B78AC82D17}
WebConsole (AMD64)
{B9853D74-E2A7-446C-851D-5B5374671D0B}
Gateway
{1D02271D-B7F5-48E8-9050-7F28D2B254BB}
SCX-ACS (AMD64)
{46B40E96-9631-11E2-8D42-2CE76188709B}
SCX-ACS (x86)
{46B40E96-9631-11E2-8D42-2CE76188709B}
Roger

LG G3 horrible after Lollipop. roll back?

Similar Messages

Maybe you are looking for