LG Transpyre stuck on verizon logo. Keeps rebooting

I have an LG Transpyre that is stuck in a bootloop on the Verizon logo. Does anyone have the factory image file I could flash via odin?

ddroby,
I appreciate you working with us to get this resolved. Place the phone in Safe Mode http://www.verizonwireless.com/support/knowledge-base-127466/ and then reboot the phone. If the issue still persist, the next step would be a hard reset http://www.verizonwireless.com/support/knowledge-base-127239/.
JohnB_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Similar Messages

IPod touch stuck at apple logo (while rebooting)

my ipod touch 4th generation has got stuck while switching it on . And when the apple logo came it got stuck . I tried connecting it to itunes , it recognised but still it was stuck . it has been 4-5 hours since it was stuck. i would like to get some help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HELP! my ipad 2 keeps rebooting itself after 2 minutes and battery is stuck at 1%. what should I do?

HELP! my ipad 2 keeps rebooting itself after 2 minutes and battery is stuck at 1%. what should I do?

Step by step troubleshooting:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808

My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!

My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.

http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice.

IPad Mini keeps randomly rebooting - started last week after downloading 8.3 - Apple logo keeps coming up with the reboot/download line below

- started last week after downloading 8.3 - Apple logo keeps coming up with the reboot/download line below. Seems to happen after opening a site to view information or pictures or.......

this is getting more & more ridiculous......and worsening by the hour. Now every click on a Pages file makes it reboot....and just trying to save some files prior to doing a total restore as not sure what gets saved in the "back up" prior to the restore. Am starting to love my 5 year old original IPad as slow as it is, even more....

Q10 reboot stuck on Blackberry logo after reset update from OS 10.1.. to 10.2.0.4...

Hi All,
I was update my OS from 10.1 to 10.2 last night via OTA, 100% complete the donwload but when is restart and loading it stuck on the Blackberry Logo eventhough is 100% complete the reboot loading screen.
Is there anyway to solve this problem? I tried few reference from this site but still can't solve the problem.
Thanks in advance,

Hi Mondo1 and welcome to the BlackBerry Support Community Forums!
Try pressing Alt+the Up Arrow+Delete to see if that will force a reboot on your BlackBerry Q10. Let me know if that works.
Thanks
VIA | Cpt_Sweatpants
http://supportforums.blackberry.com/t5/BlackBerry-Q10/Stuck-on-bb-logo/m-p/2446567/highlight/true#M3...
plug your phone in to your PC, remove the battery, open BlackBerry Link, wait for Link to tell you that no phone is connected then replace your battery.
Let us know if that helps you.
VIA | BillJ
http://supportforums.blackberry.com/t5/BlackBerry-Q10/New-OS-Stuck-at-Blackberry-Logo/m-p/2523007/hi...
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Frozen Ipod/ Ipod keeps rebooting at black apple logo screen (on loop)

Frozen Ipod/ Ipod keeps rebooting at black apple logo screen (on loop)
-I've already replaced my old 60 GB Ipod in exchange for an 80GB, I bring it home, sync it up with Itunes v7.02 and everything works fine for a while. Not even 24 hours later I go down into my artist/song directory to play a song, and it freezes again. I do the menu center key soft reboot a few times to bypass it and it works for awhile. I've tried looking for current updates for software on it, Restoring it, Resyncing and now It gets to the point everytime I unplug the ipod from charging I get back to the menu and try to play a song or video and it does nothing, it freezes everytime.
There has to be an explanation as to why my first one did it and why my new 80GB is doing it.
I've already ran a diagnosis on all the files in the ipod all of them come back clean.
Help me out.
If you know how to resolve this issue reply and/or email me
[email protected]

My ipod is having a similar problem. The black apple logo has been the only thing I see on my ipod. I went a step farther and held the select and play/pause button to get it into disk mode. Once I am here I cannot proceed. I do not have computer that I hook it up to and have transferred the desired songs from an ex-girlfriends computer which I do not have access. What can I do once I have it in disk mode if I do not have a computer available?

Xperia is stuck on sony logo and won't continue reboot after wiping

i was currently on a mod and it keeps on freezing so i decided to revert to stock.now, when i wiped phone using recovery tool,it is stuck on SONY logo and will not continue to boot.i have also tried to go recovery but it won't.any help guys?

What if you reflash it (with flashtool)?

Ios7 updated, phone keeps rebooting after a logo

Iphone 4 (AT&T) updated with IOS7 and phone initially had issues activating but once activated, it just keeps rebooting....as soon as the logo pops up, goes down again and comes back with logo and keeps doing since last night. Tried to connect to itunes but as it is not staying up till itunes recognizes it. Tried DFU mode but won't stay that long either.
it worked perfectly prior to that and updated all IOS updates till now and no issues.
need help.

Sorry to hear that you lost all your data
When you update directly from the phone only the changes from the previous version are downloaded and the download is therefor smaller then the one you get in SUS or PCC which downloads the entire firmware.
I also get some pop/clipping sound when making a call while listening to music so this is not a problem with your phone. I can forward this as feedback.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My phone ran out of battery as it was updating to iOS 6. Now it is having trouble rebooting. The silver apple logo keeps showing up and fading away. And doing it all over again... What should I do PLEASE help!! My phone is NOT jailbroken.

my phone ran out of battery as it was updating to iOS 6. Now it is having trouble rebooting. The silver apple logo keeps showing up and fading away. And doing it all over again... What should I do PLEASE help!! My phone is NOT jailbroken.

I should mention, it was on low power as I was using it.

Ipad stuck in apple logo reboot loop to home page and then goes off

my ipad2 stuck in apple logo to home page rebooting loop and cant charge to 100%

Mine is doing the same thing and won't charge. It stays at 2%....this happened suddenly.

My galaxy s4 is stuck at the Verizon logo. What do i do?

My s4 will not boot past the Verizon logo. i've tried everything. Now what?

If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. Are you sure the "friend" who sold you this iPad was the primal owner? If you cannot contact the original owner return the device to "your friend" and get a refund. You will never be able to activate the device and no one can help you do it.

Ipad mini is stuck on Apple Logo, have shut down but still won't reboot

Ipad mini is stuck on Apple Logo. Have done a forced shut down, but when it starts up again its back to the apple logo - its not moving either

Hi Bonney Fam,
Thanks for contributing to the Apple Support Communities.
You mention that your iPad mini is stuck at the Apple logo after it shut down. If you haven't already, try resetting it again:
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
From:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If the iPad still doesn't start up past the Apple logo, try this method to reinstall iOS:
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
From:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
All the best,
Jeremy

Toshiba Satellite p75-A7200 stuck on toshiba logo after bios change

My Toshiba Satellite p75-A7200 is stuck on toshiba logo after bios change.
entered bios fine changes from UEFI to CSM boot and now i cannot enter bios or boot past toshiba logo.
Ive tried F2 tapping and holding while powering up the laptop(tried every Fkey,DEL,ESC, with and without FN key)
cannot re-enter bios.
Also i tried to run the bios update cd created multiple 1.50 1.40 even 1.00, it doesnt seem to read any media.
i tried holding C, FN+C and f and just about every key on the keyboard to get something to work. i had dvd as top of boot priority for a while now so i shouldnt have to try f12 or holding C before boot but i tried . it doesnt seem to read any media
i tried windows 8 install cd, Ubuntu, centos, nothing goes past toshiba logo and no errors, i dont get the non bootable device error so its seems to not be reading the dvd. (dvd does spin and make read noises) im trying to find my usb floppy drive to try a floppy version but it acts like its not reading any media.
I also pulled the HDD and all usb devices to make the dvd the only media available and with the HDD out it spins then toshiba logo then black screen with solid white horizontal curser on top left of screen.(only happens when hdd out)
is there some type of key combination that will force a bios update or a crisis recovery mode for bios.
I also Pulled the battery for 2 solid days(battery,cmos battery, and power supply and held power button for about 10 mins while watching tx to make sure the thing was drained before the 2 day sit with no power at all.
this happened the second i changed from UEFI to CSM boot so its not a motherboard problem or anything like that because all was well before this setting change.
I already pulled the HDD and backed it up to another drive and swapped it to elimiate that.
any ideas on a secret key combo to force a bios read from dvd or usb or anythng.
or another combo that im just missing to enter bios after CSM boot.
UPDATE
to do a crisis recovery on this laptop
1 get a usb stick and format it in fat or fat32
2 download "7zip" and install it if you dont have it.
3 download bios from toshiba website.
4 run the installer for bios but dont choose and option just close it we just want to extract the files to the location normally c:\splnvxxx where xxx is the version number like 150
5 goto the installed locaion "c:\splnv150" or whatever number.
6. find file os2014273a_150 or something similar. it will be an application, it will end in version number _150, and it will also have a disc image file of the same name. but we want the app.
7. right click on it and you should have an option 7zip then extract
once extracted there is a folder now archesxxxxxx_bios_v150_win
8 copy the bios file located in archesxxxxxblahblah/X64/BIOS.fd , BIOS.fd is the bios and just copy that to a BLANK usb thumb drive that was formatted with fat or fat32.
9. put usb into your satellite and unplug the power from it.
10 holding FN + ESC key together plug the power back in and press power button.
11. release keys FN and ESC if all is right it will have the power button and led on from blink abut every 1 second while it searches for the bios. once its done it will reboot and you should be good to go.
if it keeps cycling with the power button then the bios is named wrong or something is not right with the usb. try reformatting it again and make sure that the bios file is the ONLY thing on the drive.

Ok a little research and digging into the bios exe downloaded from toshiba shows this has INSYDE BIOS witch should have a recovery process wich i prepared a usb stick with just the bios.fd on it found some post around toshiba forums with different models using win +B or Fn + F but neither of these worked for me to force bios update
anyone with this model know the key combo to force recovery

IMac 27 OS 10.6.8 Stuck on Apple logo when trying to re-install

I own a 1st own 27 inch 2.8 Ghz Core i7 Imac, 1 TB HDD and 12 GB 1067 MHz DRR3, originaly 4 GB then added 8 GB on 10/22/2011 from OWC. I own multiple iMacs for work but this one is mostly for entertaiment and play few online games like WoW and Stracraft 2.
Been using this iMac for a couple of years and never had any issue with it untill the last 3 or 4 months. I started to notice that while while joining online games I was suddenly always the last one to load, then I was experiencing lag and very short freeze time during the game play.
I then realized that I never did upgrade my memory so I decided to order an extra 8 GB from OWC, installed the sticks in and my load time was now solved, I was no longer the last one to load and most applications was running much smoother as well.
2 or 3 weeks into it, the lag came back and the random freeze were happening more and more often to the point that I could no longer play the game. I also noticed that if I tried to do multiple file transfers at once or jump from app to app I was getting the wheel of fortune way too often. I check my hard drive and realized that it was almost full, about 900 GB out of 1 TB were in use! Did a major clean up and now the drive is down to 400 GB and 600 GB available.
The wheel of fortune just won't go away, this computer is now so slow that it is pretty much unusable...
What I have done so far to fix it:
- I ram few time Disk Utility, every single time it finds quiet a few permissions errors and repairs, I was also volume error message in read that I could not fix, it was asking be to reboot + hold C with the install CD to do the repair.
- Reboot the computer with the install DVD in hold C but I am getting stuck at the apple logo.
- Ran Disk Warrior which gave me the same error and asked to reboot with hold C, same problem I am getting stuck at the apple logo.
- Did a reboot + option, getting the volume choice, select the DVD then get stuck at apple logo.
- Did a Command + S reboot, ran a check disk with repair, told me that everything was ok.
- Back in OS X, ran Disk Utility, the volume error now gone but still getting permissions to repair each time I run a check.
- Ran a full scan with Drive Genius, 0 bad blocks found after 3 hours of scan.
- Ran all tests on TechTool Pro 6 and no error on disk nor on Memory, still find permissions issues when I check permissions.
I am still getting the wheel of fortune randomly while I am typing this post, Techtool Pro is running memory test none stop, Drive Genius is scan the hard drive and Disk Warrior is checking permissions.
I removed the extra 8 GB of memory, the Mac gets even slower and still get the random wheels when trying to do more than 1 thing at once...
Not sure what to do next? I fell like the HDD is failing but every single test is telling me the opposite, can't figure out why i can't run an install after a reboot.
Thoughts?

Have you reinstalled Snow Leopard? Before doing that see the following:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
As a start I would suggest using a utility like Snow Leopard (now Lion) Cache Cleaner or a similar utility such as TinkerTool System to clean all user, system, and font caches. Also:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
And, visit The XLab FAQs and read the FAQ on resolving SBBOD issues.
Yours may simply be an issue of cleaning up. You can try creating a new user account. Log into the new account. Do all these problems disappear?
The repetitive messages from Disk Utility are normal and may be safely ignored. I would be a bit concerned by the fact that you cannot successfully boot from an installer disc.

LG Transpyre stuck on verizon logo. Keeps rebooting

Similar Messages

Maybe you are looking for