LG TV as a Monitor - Problem with not Mirroring Display

I used to be able to extend to my LG TV and use that as an additional monitor side by side with my Macbook Pro 17" but now it only allows me to mirror. What has changed. I have tried different HDMI cables.

Mirrored mode mirrors the display including resolution. Use extended mode not mirrored mode to set the external display resolution to the TV's native mode.

Similar Messages

How do I set the default external monitor setting to NOT mirror displays?

Greetings folks. I take my Lion macbook all over the place, and frequently plug into projectors to present. I NEVER mirror my display, and always use the projector and on-screen displays as separate displays, yet when you plug in a new projector to the MacBook Air (or MBP) it always defaults to "Mirror Displays" in the arrangement tab. Is there a way to change that to NEVER default to mirror displays?

I've tried that, and then created my installer, but it defaults back to having auto update checked, or in the ON position. I want it to default to being OFF so any new installs or upgrades that I send out do not turn it back on.
We manage all computers here, and do not want users doing any updates.

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.
Programs (Safari, mail, messages) keep crashing, mail will not delete properly (some will keep popping into my inbox again for no reason!!!), slow, settings lock up etc. etc.
This only seemed to become an issue once I updated to ios 5.1 and funnily also affected my Ipad even though i hadn't updated the software yet. I have since updated the software on my ipad thinking it might help too but that only made things worse!! So I am not sure if it's an ICloud issue, but when i try to disable ICloud my devices lock up as well.
The battery life is also shocking!!
I have hard reset both devices, restored both devices, reset the setting and tried a whole host of other suggestions (like closing background programs) on this forum buit nothing works and i am tearing my hair out.
I looked in the phone and ipad log and there do seem to be low memory reports though i don't know why these are occuring now when they never have before??
I don't know if I can restore the old operating system (If I can please let me know how). The phone or ipad are not jailbroken.

but you should have a backup in itunes.
Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app! Good Luck!

TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
Thor

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

HT1222 Having problem with Notes at time will not record dictation on iPhone?

Having problem with Notes at time will not record dictation on iPhone?

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help have your phone examined by an apple technician. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

A problem with Notes...

I'm sorry if I posted this in the wrong place, but wasn't sure where to go.
I'm having problems with notes on my Mac running 10.8.4.
I've done searches, but cannot find my problem.
I have set up an iCloud account. I can see my notes in iCloud, but if I try to use the Notes.app, I get the above response. The prefs seem to be set up, I must be doing something wrong.
Thank you for any help,
mhh

Apparently I don't know how to paste.
The message reads:
"This Mac can't connect to iCloud because of a problem with [email protected]"

Problem with not enough resolutions Late 2013 iMac 27"

Hi guys.
Last friday arrive to my home my new top iMac --> i7 / 16Gb / 3Tb FusionDrive / GTX 780
I always use 1920x1080 resolution display in my older iMac Mid 2010 27" but in my new iMac say this:
I need 1920x180. Is it possible change the resolution with scrips or edit one file...?
Thanks

baltwoJul 21, 2014 10:07 PM
Re: Re: Problem with not enough resolutions Late 2013 iMac 27"in response to GoldFran
Might be primitive, but free, and does the job.
the truth is you're right. Sometimes we search any solutions but this is some complicated when the best fix normally, It´s easy solution... "Okam's razor"

Problem with not getting Internet Connect on AirPort Express

Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.

Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
In configuring the AX using AirPort Utility:
Under Internet, set the connection to be Ethernet using DHCP.
Under Connection Sharing, set it to distribute a range of IP addresses.
Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None.

Problems with notes and mark ups in pdf

I'm having problems with the Adobe reader for iPad.
Whenever I modify a pdf file, adding notes or any other mark up, I'm not able to see any of the markups in the file when I open the same file with another application or I send it via e-mail.
Only the digital signature is still visible.
Thanks

You are correct. When i open it with Adobe i get my mark ups etc. When i use Apple`s pdf view i do not.
Problem solved.
Date: Mon, 17 Dec 2012 10:46:22 -0700
From: [email protected]
To: [email protected]
Subject: Problems with notes and mark ups in pdf
Re: Problems with notes and mark ups in pdf created by Pat Wibbeler in Adobe Reader for iOS - View the full discussion
Can you share what applications you are using to view the notes after emailing? You have to view the document in a Reader that supports annotations. Apple ships a built in pdf viewer (like the one used in iBooks) that many iOS developers use (e.g. Dropbox, email). This built in PDF viewer does not support rendering annotations. However, many other applications (like the Adobe Reader for iOS and the Adobe desktop products) do support Annotation rendering. Similarly, one of our competitor's PDF viewers (PDFExpert) supports this functionality as well. Annotations are part of the PDF standard and the specification is widely available and we would love to see more renderers support it!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4927598#4927598
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4927598#4927598
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4927598#4927598. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader for iOS by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem with repaint of display after a click event

Hi,
I have a problem with repaint of display. In particular in method keyPressed() i inserted a statement that, after i clicked bottom 2 of phone, must draw a string. But this string doesn't drawing.
Instead if i reduce to icon the window, which emulate my application, and then i enlarge it, i see display repainted with the string.
I don't know why.
Any suggestions?
Please help me.

modified your code little
don't draw in keyPressed
import java.io.IOException;
import javax.microedition.lcdui.Canvas;
import javax.microedition.lcdui.Command;
import javax.microedition.lcdui.CommandListener;
import javax.microedition.lcdui.Display;
import javax.microedition.lcdui.Displayable;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
public class PlayerCanvas extends Canvas implements CommandListener{
     Display display;
     Displayable dsp11;
private Image play, pause, stop, next, previous = null;
private int gamcode;
private Command quitCmd = new Command("Back", Command.ITEM, 1);
public PlayerCanvas(Display display,Displayable dsp11){
     this.display =display;
     this.dsp11 =dsp11;
     addCommand(quitCmd);
     createController();
     setCommandListener(this);
     display.setCurrent(this);
          protected void paint(Graphics g)
          g.setColor(255,200,150);
          g.fillRect(0, 0, getWidth(), getHeight());
          if (play != null){
          g.drawImage(play, getWidth()/5, getHeight()-50, Graphics.BOTTOM | Graphics.HCENTER);
          if (stop != null){
          g.drawImage(stop, getWidth()/5, getHeight()-10, Graphics.BOTTOM | Graphics.HCENTER);
          if (next != null){
          g.drawImage(next, (getWidth()/5)+10, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
          if (previous != null){
          g.drawImage(previous, (getWidth()/5)-30, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
               /////this will draw on key UP
               g.setColor(0,0,0);
               System.out.print(gamcode);
               if(gamcode==Canvas.UP){
                    g.drawString("PROVA",10, 0, 0);
               }else if(gamcode==Canvas.DOWN){
                    g.drawString("DIFFERENT",10, 30, 0);
private void createController()
try {
play = Image.createImage("/icon3.png");//replace your original images plz
pause = Image.createImage("/icon3.png");
stop = Image.createImage("/icon3.png");
next = Image.createImage("/icon3.png");
previous = Image.createImage("/icon3.png");
} catch (IOException e) {
play = null;
pause = null;
stop = null;
next = null;
previous = null;
if (play == null){
System.out.println("cannot load play.png");
if (pause == null){
System.out.println("cannot load pause.png");
if (stop == null){
System.out.println("cannot load stop.png");
if (next == null){
System.out.println("cannot load next.png");
if (previous == null){
System.out.println("cannot load previous.png");
          protected void keyPressed(int keyCode)
               repaint();
               if ( (keyCode == 2) || (UP == getGameAction(keyCode)) ){
                    gamcode = UP;
                    repaint();
                    else if ( (keyCode == 8) || (DOWN == getGameAction(keyCode)) ){
                         gamcode =DOWN;
                         repaint();
          else if ( (keyCode == 4) || (LEFT == getGameAction(keyCode)) ){
          else if ( (keyCode == 6) || (RIGHT == getGameAction(keyCode)) ){
          public void commandAction(Command arg0, Displayable arg1) {
               // TODO Auto-generated method stub
               if(arg0==quitCmd){
                    display.setCurrent(dsp11);
}

Problem with hotmail calendar display

Problems with hotmail calendar display.

I am almost a total computer novice and am having what I think is the same problem Just got my first Apple computer (Macbook Pro). MSN Hotmail is my email account. All the events on my 'hotmail' account are now unreadble because they are squished to the left side of the screen and I don't find any instructions as to how to fix this in the system. This problem didn't exist when I first started using my MAC two days ago, but now I'm stuck. Everything else in my 'hotmail' seems to work fine. Don't know what Chrome or Firefox is or if there is a cost for them. Also, have never downloaded a program if any kind.
My calendar is critically important to me and I don't have a clue as to what to do now. Hope you can help.
Thanks. Linda

Since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

Try using Settings > General > Reset > Reset All Settings.

Dual Monitor Problems with Vista

I have a Lenovo T61 laptop running Vista ultimate 32 bit, SP1. I schlep this back and forth from home to work and put it in docking stations at each location. The docking stations have external monitors attached. At work I have a Viewsonic VX2035wm 20" Wide screen, (16:10) monitor with optimum resolution of 1680x1050. At home I have a Viewsonic VA912b 19" standard aspect ratio monitor with a suggested resolution of 1280x1024.
I typically run in dual monitor mode using my laptop display and the external monitor and extend the display across both monitors. Sometimes I run with the laptop display as the primary monitor, sometimes the external is the primary.
When I take my system from one location to another, generally upon boot or resume it recognizes the different monitor configurations and adjusts the display properties accordingly. However, about once a week I have a problem. For example, I shutdown at home, came into work and attempted to boot the system. Upon boot my external monitor displayed a frequency out of range error and did not display anything else. I suspect that the external port was configured to a setting that was not supported by the monitor. It appears that this was the primary display because my laptop only showed the background and the desktop did not display. Since nothing was displayed, I couldn't click the start menu, any icons, etc. I tried to adjust the monitor configuration by right clicking the laptop screen and selecting personalize, but the personalization dialog would not show up and I suspect that it went to the blanked out external monitor.
Please advise on how I can handle this situation. Is there any way to move the display from the external to the notebook when this happens? I noticed that Viewsonic has Vista drivers listed on their web site. Would it help to download and install these? Is there anything else you can suggest?

The main point of posting this topic was to point out the appalling service offered by Adobe but, of course resolving this issue would be nice also.
So here goes;
Dual monitor issue (Applies to CS4 applications; Photoshop, Illustrator, InDesign etc. but not Flash or Dreamweaver or any other manufacturers software).
I have 2 monitors installed with Windows Vista 64bit, using Nvidia Quadro FX 1700:
-1280 x 1024 (primary display on the left) &
-1440 x 900 (on the right)
With a CS4 application maximised in the larger monitor, all the drop down menus display fine, if the chosen drop-down menu is taller than the height of the monitor (fonts, for instance), an arrow appears at the bottom of the menu so that I can scroll down the rest of the menu. If I then reduce the size of the CS4 application window, move it to the smaller monitor and maximised it again, the drop-down menu (which displayed and functioned fine in the primary monitor) is cropped off so I can't access the rest of the menu.
This might seem a minor irritation, but for batch-processing of merged files (the main purpose for having 2 monitors) CS4 makes the 2nd monitor redundant.
Another, less irritating issue (again, only with the applications named above) is that the window when maximised in the secondary monitor 'hangs over' into the primary monitor.

PRI monitoring problem with SNMP

Hello
I'm having some problems with PRI monitoring.
I'm using cpmDS1ActiveDS0 MIB on a 3800 VoIP gateway with 4 PRI (2x2) (IOS 12.4(4)T1)
1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0 - I can see PRI 0/0/0 total number of calls
1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.1 - I can see PRI 0/0/1 total number of calls
1.3.6.1.4.1.9.10.19.1.1.9.1.3.1.0 - Error
1.3.6.1.4.1.9.10.19.1.1.9.1.3.1.1 - Error
1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0.x - Error
1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.1.x - Error
The PRIs that we want to see are 0/1/0 e 0/1/1...... (bad luck!)
Do I need to make some special configuration on the Router?

Have you had any responses to this issue ?
I am running into exactly the same issue and have tried everything I can find to get these individual PRI (count of channels/lines in use) statistics.
Just for the record, here are some of the SNMP OIDs that I have tried (the ISRs do respond to them, only thing is, the data they send back is mostly rubbish...) the output below is from two separate routers, with different versions of IOS running (which is shown in the sysdescr response):
Note that the query in red in the second router was responded to with a valid response in the FIRST router...
All of these OIDs have been suggested at various sites online as useable SNMP OIDs for the ISR, but at other sites, they are suggested to be faulty. I have found no definitive statement for ways to get these stats successfully on the ISR platform (which amazes me.) Output below is using net-snmp to collect the stats.
I welcome any suggestions as to how this can be done reliably for the ISR, and what IOS versions WILL work. (since I am getting way different reponses to the same OIDs on the two versions below).
You'll see that for the second (DC) router below, the values are always Zero.
Yet I can guarantee that the ACTUAL stats are NEVER zero during the time period queried.
Timestamp: 2010-12-27_13:56:31.73
C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmActiveDS0s.0
.1.3.6.1.4.1.9.10.19.1.1.4.0
C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0
.1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0
C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0
.1.3.6.1.4.1.9.10.19.1.1.3.0
C:\usr\share\snmp\mibs>snmptranslate -On CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0
.1.3.6.1.4.1.9.9.63.1.3.3.0
C:\usr\share\snmp\mibs>snmptranslate -On ISDN-MIB::isdnBearerOperStatus.32
.1.3.6.1.2.1.10.20.1.2.1.1.2.32
From ROUTER2 - HQ:
SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software,
3800 Software (C3825-ADVIPSERVICESK9-M),
Version 12.4(15)T8, RELEASE SOFTWARE (fc3)
CISCO-POP-MGMT-MIB::cpmActiveDS0s.0 = Gauge32: 14
CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0 = Gauge32: 14
CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0 = Gauge32: 7
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0 = Gauge32: 7 interfaces
ISDN-MIB::isdnBearerOperStatus.32 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.33 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.34 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.35 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.36 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.37 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.38 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.39 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.40 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.41 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.42 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.43 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.44 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.45 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.46 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.47 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.48 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.49 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.50 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.51 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.52 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.53 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.54 = INTEGER: idle(1)
From ROUTER2 - DC:
SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software,
3800 Software (C3825-ADVIPSERVICESK9-M),
Version 12.4(18), RELEASE SOFTWARE (fc1)
CISCO-POP-MGMT-MIB::cpmActiveDS0s.0 = Gauge32: 0
CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0 = Gauge32: 0
CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0 = Gauge32: 0
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0 = No Such Object available on this agent at this OID
ISDN-MIB::isdnBearerOperStatus.32 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.33 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.34 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.35 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.36 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.37 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.38 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.39 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.40 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.41 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.42 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.43 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.44 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.45 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.46 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.47 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.48 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.49 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.50 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.51 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.52 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.53 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.54 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.81 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.82 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.83 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.84 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.85 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.86 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.87 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.88 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.89 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.90 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.91 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.92 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.93 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.94 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.95 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.96 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.97 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.98 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.99 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.100 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.101 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.102 = INTEGER: idle(1)
ISDN-MIB::isdnBearerOperStatus.103 = INTEGER: idle(1)
Timestamp: 2010-12-27_13:56:35.02

Monitor problem with envy dv6-7214nr

I have a problem with my monitor. At the very top there is a single line that keeps flashing. What could the problem be? A bad monitor? Or something else?

Hi Antlan,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY dv6-7214nr Notebook and getting a flashing line on the screen. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices. If that does not help try to turn on the computer you start to press F11 repeatedly till the menu opens. You can do a system restore. You could check for a BIOS update.
Hope this is helpful.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

LG TV as a Monitor - Problem with not Mirroring Display

Similar Messages

Maybe you are looking for