LG TVs. Dont let the gimmicks fool you.

Ok. I bought a 47 LM7600 @ best buy on sale for $1600, which isnt pretty pricey for a 47 incher even if its a 2012 model. Anyway I coughed up the dough and took the TV home. I unboxed and hooked up the TV pretty simple.
Man was I suckered.
The TV has the lamest remote EVER. Magic motion remote? Are you kidding me? You have to re-alighn the remote EVERY 30 seconds and if your using at even the slightest angle, the magic cursor is off the mark. I tried to use the browser and tried to type in http://www.gmail.com and it took me over 10 min. Very crappy remote.
The TV was even worse. Im not sure what type of settings best buy had but the "factory demo" looked decent so i got the darn tv. When i brought it home and tried out the 3d depth control, it made me so darn dizzy i nearly threw up after 10 seconds of watching. The screen was also too darn glossy when the TV was on and off. I couldnt believe it. But then again, the smart TV is just toooo slow. It took over 30 seconds for the youtube app to load, and once the app loaded the videos took even longer so i couldnt watch a single darn video and i know im sounded really mad right now which is becuase i got back from best buy like 15 min ago. I returned the darn TV and now ima get that samsung es one i forget the name.

I also agree with Slim. I don't really feel for smart features in TVs.. All brands I've encountered with so far have flaws so I think it'd be pretty much the same even if you decide to go with Samsung. As for the remote, you can't please everybody. You should just take some time and get used to the remote. Re-aligning the remote is really not much hassle and it's much faster to type with it than the standard button remotes. and I don't understand how the 3D depth control made you nearly throw up.. Just adjust it to the setting that makes you not throw up.

Similar Messages

Yes this this true ! Dont let anyobody lie to you ...

How to know that your mobile is original or not ?????
Press the following on your mobile *#06# and the-international mobile equipment identity number appears. Then check the 7th and 8th numbers:
1 2 3 4 5 6 7th 8th 9 10 11 12 13 14 15
Phone serial no. x x x x x x ? ? x x x x x x x
IF the Seventh & Eighth digits are 02 or 20 this means your cell phone was assembled in Emirates which is very Bad quality
IF the Seventh & Eighth digits are 08 or 80 this means your cell phone was manufactured in Germany which is fair quality
IF the Seventh & Eighth digits are 01 or 10 this means your cell phone was manufactured in Finland which is very Good
IF the Seventh & Eighth digits are 00 this means your cell phone was manufactured in original factory which is the best Mobile Quality
IF the Seventh & Eighth digits are 13 this means your cell phone was assembled in Azerbaijan which is very Bad quality and also dangerous for your health
This true ! Dont let anyobody lie to you !
Solved!
Go to Solution.

The location of manufacture is not encoded into the IMEI number, Nokia doesn't even create the numbers - they receive them from an external industry regulatory body. The details for all IMEIs since 1st Jan 2004 are as follows:
The first two digits (theoretically) represent the national association which issued the number, though in practice the worldwide GSM Association now issues all IMEIs. The first two digits '35' (theoretically) indicate the British Approvals Board of Telecommunications, though all IMEIs in the world currently begin 35...
The next six digits represent the device type (640602 is a Nokia N96, 808201 is a Nokia N82; 908801 is a Sony Ericsson K800i etc.)
The next six digits are the individual device's unique serial number
The final digit is a check-digit.

TS1292 Good morning I received a 25$ itunes card as a gift yesterday, I know it was bought in the target located in 10880 Olson Dr on friday November 30th, but it says that the card has not been activated, currently I dont have the receipt can you please

Good morning I received a 25$ itunes card as a gift yesterday, I know it was bought in the target located in 10880 Olson Dr on friday November 30th, but it says that the card has not been activated, currently I dont have the receipt can you please help me

Normally what you should do is go back the retailer from whom you purchased the card and discuss the problem with them. They should either correctly activate the card or give you a new one. Since you have no receipt, though, it's unlikely that Target will help you, so go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store.
Please note that everyone here is just a felllow user, so you should post no personal information as it will quickly become public.
Regards.

How can i get my contacts back if i dont have the back up

How can i get my contacts back if i dont have the back up

if you didn't back them up then you cant get them back without physically puting them back in.

IMac DVD drive MATSHITA DVD-R UJ-875, dont let CD come out

Hi, my imac DVD drive MATSHITA DVD-R UJ-875, dont let CD come out because the center pins that arrest the CD. Somebody can help me???

i try everything!!! the mouse, the drutil and all the other things so i open my iMac and the superdrive to see what is apening and cause is the center pins that arrest the CD when i eject the CD that pins dont let the CD free to come out... sorry for my english.

HT201441 hi , i'm facing a big problem here,my little brother has set his i pad to an e mail that he dose not remember anymore one day he tried to unlock the ipad but he entered a wrong password many times i had to restore but i cant cus i dont know the

hi , i'm facing a big problem here,my little brother has set his i pad to an e mail that he dose not remember anymore one day he tried to unlock the ipad but he entered a wrong password many times i had to restore but i cant cus i dont know the apple ID

If you don't know your ID, you can try to find it as explained here: http://support.apple.com/kb/HT5625.

How do you connect the i tunes to your phone when it dont let you in it ?

the phone is on but it dont let you in it and it has the charger going to the i tunes on it how do you fix it ?

Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software
If problems then:
Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode and then restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How can i delete my music from itunes it dont let me also how to change the name of the ipod shuffle it dont let me

i need help please help me on itunes i try to change my name for the ipod shuffle and it dont let me it dont do anything also when i try to delete the music on it it dont show me if i want to delete or not the font is just gray and dont show any opitions also when i go on my iphone it lets me do all the stuff that it dont let me do i connect my iphone and it lets me delete music and change the name but the shuffle doesnt

What happens when you try to change the Shuffle's name from under the Devices section in the left hand pane of iTunes?
Is your iPod set up to manually manage its contents. For more information, see your iPod's User Guide.
http://support.apple.com/manuals/#ipodshuffle
B-rock

Crash report application what is that ? When shut down the computer this Message appeared The application crash repórter Dont Let shut down the computer

Crash report aplication what is that ? When shut the computer this Message appeared The application crash repórter Dont Let shut down the computer

Command-Option-Escape does the same as
Apple Menu > Force Quit...
It opens a floating box that lists current major Applications and their status (e.g., Not responding) and allows you to force quit any single Application or re-launch the Finder.

While im preparing to install application, it dont let to install them and keep asking me to authorise the computer. How can I do?

while im preparing to install application, it dont let to install them and keep asking me to authorise the computer. How can I do?

You can authorise your computer's iTunes via Store > Authorise This Computer
If you are getting a message on your iPad when trying to directly download apps that are over 20 meg in size over 3G, then as there is 20 meg limit over 3G on the iPad, you either need to switch to a wifi network on your iPad, or download them on your computer's iTunes, connect the iPad, and then sync them across to the iPad

Itunes could not connect to the ipod becasue it is locked with a passcode. You must enter your passcose on the ipod before it can be used. BUT i cant unlock it and i dont have the original itunes that is was hooked up with before either. HELP!

"itunes could not connect to the ipod becasue it is locked with a passcode. You must enter your passcose on the ipod before it can be used" BUT i cant unlock it and i dont have the original itunes that is was hooked up with before either. HELP! It wont let me restore because it is locked. I cannot unlock it. I have tried everything online. nothing works.

Place the iPod in recovery mode and then restore the iPod to factory defaults/new iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

HT201274 how to unlock ipod if you dont remember the password to unlock

my brother changed password on my ipod and now he dont remember the password and i cant get in

Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

HT1476 i heard that if you let the battery drain to zero that it could hurt the battery life (like if it goes to zero the battery life would go down from like maybe 10 hours, to 8 hours. just an example.) is this true because ive been worried about my bat

i really want all my devices working at full capacity especially the battery and i want more info on the care of it. like should i charge a device for a specific time the first time i get it, and if its ok to let a battery go to zero and if overcharging is bad. by the way i have an ipod nano 5g, ipod shuffle 4g an ipod touch 4g, an iphone 5s, a ps vita, a surface rt, and im planning to get a macbook pro. ive had some of these devices for a while and some are fairly new. i really want to make these devices last and i dont want to have to replace them for any reason.
please help and thanks.

It is not good for Lithium chemistry batteries to become fully discharged, however, iPads, iPhones and iPods will shut off before the battery is fully drained. That is, when the phone goes from 1% to 0% and shuts off there is still plenty of charge on the battery. However, you should not let it sit for a long time after it shuts off, as the phone still uses some power even in this state. So if the phone shuts off due to low power you should charge it within a day or two.
You also cannot overcharge an iDevice. The charger is actually in the device; it is not the adapter that you plug into the wall. That is just a 5 volt power source. And the charger in the device will stop charging when the device reaches full charge.
One advantage of Lithium batteries is that they have no "memory effect". That is, you don't have to fully drain them before charging, and you can connect them to a charger at whatever the current state of charge, and remove them from the charger if necessary before they reach full charge. None of these activities will shorten the life of the battery.
It is a good idea to run the battery all the way down, then charge to 100% every month or so. But this is to recalibrate the battery gauge, it is not to "condition" the battery.

I have restored my ipad mini and it has an activation with a email i dont use cause its fake and i dont know the password and it wont let me activate it till i sign it in how do i take it off my ipad

i have a random email for my activation email and i dont know the password and it wont let me active it unless i sign in with that email and password how do i change it so that doesnt pop up or till it doesnt ask for it

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Where can you log a complaint/let the developers of Captivate 5 know there is an issue?

I was on a call with the help desk for 2 hours and they couldn't figure out what was wrong with my project. When I publish it, it seems to publish fine but when I try to view it's just a black screen. I can't tell you everything they were having me do. Finally I decided to take 40 or so screens at a time and dump into a new project and publish. It worked, then another 40 pages, then another etc. and always published fine and I could view the project fine.
Then I copied in 6 pages of PPT and it was fine. My last page to copy in was the 1st page. I always have a graphic and then the title of the project come in as animated text. Publish and it's black. Took out the graphic, still black. Took out the text, everything was fine.
I created a number of different projects just a couple of pages long, had a regular screen, then a page with animimated text and black.
What I surmise is that you cannot have animimated text in a Captive 5 project. I want to let the developers know. I cannot tell you how frustrating this day has been, but at least I finally figured out why my 2 week long project wouldn't publish.

Greetings,
I'm having the same issue.
My Captivate project had one slide with animated text. First I tried deleting the animated text from the slide; then I deleted the entire slide from the project. Neither resolved the problem. I even tried removing all animation from the slides. Still no improvement.
My project was created in Captivate 4 and then converted to Captivate 5. Powerpoint was not used at all in the creation of the project. It uses extensive (but fairly basic) animation and video. Animated text is used on one slide only.
I am able to run the published file on another computer with Flash Player Version 10.1.85.3.
Like others, it is not an option for me to revert to a previous version since I cannot control the Flash Player version of my clients and learners.
I'm aware that Adobe is working on this issue and hope that they are able to resolve it VERY quickly. I have offered to share my Captivate file with Adobe if it would expedite problem resolution.
Kind Regards,
Sara

LG TVs. Dont let the gimmicks fool you.

Similar Messages

Maybe you are looking for