LGBD390 blu-ray cannot find the access point of WRT160N/3.

I have been trying to set up the wireless connection to be able to view streamed movies from netflix through my LGBD390 blu-ray player. I have successfully connected the wireless router to my Embarq router. When I check status, it says it is enabled and connection is o.k. I have been on the phone with Linksys (and was charged $9.99 which did not solve my problem). I also have chatted and so far that has not worked either. I have downloaded the upgrade for the firmware. No matter what I do, the blu-ray cannot find the access point of the router.
Can you help?

thank you for your responsse Wizzard, but there are things I need to change that I don't know how to do. I have no idea how to assign static ip, subnet and gateway on the blu-ray. When I went to the link , it was actually for adifferent router than mine. I have a WRT160N/v3. I also did not know what to put in the protocol. and if I should just put the number in the beg. and ending. I also don't think I have an ethernet adapter. Maybe you could give me more information. Thanks in advance.

Similar Messages

HT5163 where do I find the Access Point Name?

I have a iPhone 4s and changed my sims card, the new provider instructions are to change my "Access Point Name" to get date

Is the device unlocked?
If it is carrier locked, the APN settings are not accessible.

Safari cannot find the server and question mark in blue square

Hi
I consistently have problems with safari displaying the message safari cannot find the server. The version I have is 5.1.8 and I installed a security update today (23.3.13) hoping it would solve the problem. After refreshing the page a couple of times or restarting safari everything works as normal but this is an ongoing issue. I also have problems with images loading on sites. They appear as blue squares with question marks. I have tried most things people have said on the net but nothing is working.
Please help!
Thanks

HI aad1612,
Try deleting the safari plist by foloowing these instructions:
Close Safari
Open a Finder window
Click on "Go" in the upper status bar
Click and HOLD the alt/option key (Library should appear in the above list)
Keep holding the alt/otion key and click on Library (this will open a new window)
Open the Preference folder (NOT Preference Panes)
Look for com.apple.Safari.plist
Right mouse client to move this file to trash
Empty the trash
Open Safari again and hopefully your issue will be reoslved.
Good Luck

"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'name'. Make sure it exists and that its name is spelled correctly.

When I run the code below I get the following error:"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'False'. Make sure it exists and that its name is spelled correctly. Note that I do not call
anything by the name of "false" anywhere in this code.
The subject code (the underscored line of code is highlighted in the debugger when the error occurs):
Option Compare Database
Private Sub JobAssign_Click()
MatLotListAvail_openform
End Sub
Function MatLotListAvail_openform()
Dim dbsAPIShopManager2010 As DAO.Database
Dim rstMaterialLotJobJoint As DAO.Recordset
Dim strSQL As String
Set dbsAPIShopManager2010 = CurrentDb
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID" = "tempvars!JobID" And "MatLotID" = "tempvars!MatLotID"
Set rstMaterialLotJobJoint = dbsAPIShopManager2010.OpenRecordset(strSQL, dbOpenDynaset)
If rstMaterialLotJobJoint.EOF Then
DoCmd.OpenForm "JobAssignMatConf", acNormal, "", "", acEdit, acNormal
Forms!JobAssignMatConf!PartapiIDVH = TempVars!PartapiID
Forms!JobAssignMatConf!JobapiIDVH = TempVars!JobapiID
Forms!JobAssignMatConf!JobIDVH = TempVars!JobID
Forms!JobAssignMatConf!MaterialLotIDVH = TempVars!MatLotID
Forms!JobAssignMatConf!Desc = TempVars!MatDesc
Forms!JobAssignMatConf!recdate = TempVars!recdate
DoCmd.Close acForm, "MaterialLotListAvailable"
Else: MsgBox "This material lot has already been assigned to this job."
DoCmd.Close acForm, "MaterialLotListAvailable"
End If
End Function

I think the SQL statement should be
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID=" & _
tempvars!JobID & " AND MatLotID=" & tempvars!MatLotID
This assumes thatJobID and MatLotID are number fields.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

I recently downloaded Adobe Bridge CC and Flash Professional CC on the Creative Cloud and I cannot find or access them on the computer - where did they go?

I have the creative cloud that I use for my schooling and I downloaded both Adobe Bridge CC and Flash Professional CC on the Creative Cloud and I cannot find or access them on the computer - where did they go?

Hello,
I only can answer what concerns WIN. By using a file manager I can see, that all my Adobe programs are stored there:
Program Files (x86)\Adobe\Adobe Bridge CC aso.
Hans-Günter

Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!

Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!

You're welcome.
There are a couple of issues connected to it:
http://www.vektorgarten.de/problems-align-to-pixel-grid.html
I don't think that list is complete

Cannot associate with the access point error message

We just got high-speed Internet installed at our house. We have a cable coming into the house that connects to a Linksys WAP54G router in our basement. We have two Dell Dimension computers that we installed Linksys PCI Wireless G Cards into. The computer down the basement is working just fine. The computer upstairs which is directly above the router worked fine the first day. The computer got powered down and upon restart wouldn't connect again. I did a system restore and it worked fine. Windows errored out yesterday, and now even after doing a restore, I cannot get it to connect to the wireless network. The error message "Cannot Associate with the Access Point" comes up. When you search for available wireless networks, none appear. Any ideas?

Try connecting to the network using the Wireless Zero Configuration...just checkout on the right-hand side bottom of the screen pc right-click the Wireless network connetion icon...click view available wireless networks...click refresh network list...on the same list you will see Change the order of preferred networks...on top of the page click wireless networks...in preferred networks...remove each & every network...click OK. Now, once again right-click the Wireless network connetion icon on right-hand side bottom of the screen & click view available wireless networks...click refresh network list...now you will be able to see your wireless network..if its a secured network it will ask you for the wireless wep key...put in the key...where it says confirm the network key & click connect...it will be CONNECTED....and you will be able to go ONLINE WIRELESSLY!!!

I cannot find the exercise files that are pointed in the "student Workbook"

hi,
i am from india, here is a local tutor organisation names as niit(find them at http://www.niit.com)
i am studying java course in NIIT code:SL-275.they gave me books from Sun microsystems . but i cannot find the exercise files that are pointed in the "student Workbook". where do i find those files?
awaiting your kind reply.
yours,
Vignesh m.

Contact your instructor. :D

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

Oracle Access Manager Configuration : Cannot find the Person Object Class

Hi,
I am trying to install OAM , I am getting the following error when i am configuring the Identity server for the first time.
1) I have installed OID. I am using one OID for both config and user data.
2) I have installed Identity server and have modified the OID schema automically during installation.
3) I have installed web pass.
I have gone to the url: http://trn-ps-oid.oracle.com:7777/identity/oblix
Here i gone to Identity System Console to configure Identity server.
Following are the config data i have given
Configuration DN : dc=mydomain,dc=com
Search Base : dc=mydomain,dc=com
Host : mypc.mydomain.com
Port Number : 389
Root DN : cn=orcladmin
Root Password : *******
Directory Server Security Mode : Open
Is the Configuration data stored in this directory also : Yes
Person Object Class : inetorgperson
Auto configure objectclass : yes
Group Object Class : groupOfUniqueNames
Auto configure objectclass : yes
After this I have clicked on the restart server button.
It comes back to the page asking to enter Person Object class details.
I Get the Error : Cannot find the Person Object Class.
I have checked the object class in OID it is there, I have verified the connection details are also correct.
Any Ideas what might be wrong.
Earlier during setup i had to modify the OID schema, how do i check if this has been done.
Any Ideas

<?xml version="1.0" encoding="utf-8"?>
<ValNameList
xmlns="http://www.oblix.com"
ListName="setup.xml">
<NameValPair
ParamName="mainOIS"
Value="true"></NameValPair>
<NameValPair
ParamName="currentStep"
Value="LDAP_CONFIG_CHANGES"></NameValPair>
<NameValPair
ParamName="status"
Value="incomplete"></NameValPair>
<NameValPair
ParamName="whichDB"
Value="OID"></NameValPair>
<NameValPair
ParamName="dataDirCopied"
Value="TRUE"></NameValPair>
<NameValPair
ParamName="machineNo"
Value="localhost"></NameValPair>
<NameValPair
ParamName="portNo"
Value="389"></NameValPair>
<NameValPair
ParamName="rootDN"
Value="cn=orcladmin,cn=Users,dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="ldapRootPasswd"
Value="**************"></NameValPair>
<NameValPair
ParamName="securityMode"
Value="Open"></NameValPair>
<NameValPair
ParamName="oblixUserDataSame"
Value="Yes"></NameValPair>
<NameValPair
ParamName="searchBase"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="configDN"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="obClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="defaultConfigForPersonOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obClassGroup"
Value="groupOfUniqueNames"></NameValPair>
<NameValPair
ParamName="defaultConfigForGroupOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obOldClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="obOldClassGroup"
Value="groupOfUniqueNames"></NameValPair>
</ValNameList>

Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003

I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.

I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.

Can i use the apple tv3 to connect a blu-ray player to the internet through the ethernet port?

I Have a blu-ray player which can access teh internet but only through a wired connection. Unfortunately, do to some renovating a can't really pass a wire from my router to the player. I was thinking of getting the express base station and hooking up an ethernet cable and getting it to connect that wy. However, for just an extra 10$ i can get teh apple tv and started to wonder if it would do the same.
Anybody know if i connect an an ethernet cable between my blu-ray player and apple tv3 if it will be able to connect to the internet?
Thanks for you help!

Your blu-ray play can't play to your AppleTV, neither using a wired connection or wi-fi.
AppleTV only support compressed format. Therefore, your AppleTV require your content to be within your iTunes library and on the supported format; http://www.apple.com/appletv/specs.html
There are however wireless devices on which you can plug an HDMI cable. I don't know the price of such wireless devices but you'll find them on the net.

Cannot find the xmlpserverstart.sh

Hi Experts,
The BI Publisher Enterprise Installation documents pointed to xmlpserverstart.sh to start the ML Publisher, but I cannot find the file in the linux server ( find . -name xmlpserverstart.* -print ).
I can access the XML Publisher url, that is before somebody reboot the linux box, I believe the XML Publisher was shutdown too.
Any piece of advise will be accepted.
Thanks,
Ether

This is from memory, since I do not have a pre-10.5 OS on any computer.
Check the Applications folder. System Preferences is there.
What version of Mc OS X are you running?

Linksys EA6700, "Cannot find the DHCP server"

Hello all
I have a Linksys EA6700 router that has given me problems the three months I've had it.
Typically I get the message "Cannot find the DHCP server" or no message at all. I have everything from three to eight PC's, SqueezeBoxes, Blu-ray players etc hooked up to it.
Very often one or several of these cannot find the server.
Is there an easy solution to this problem?
Any help appreciated!
Jan

You can set static ip information on wireless devices that don't connect to other wireless networks.
Use software like "Wifi Analyzer" for andriod or "inSSIDer" for PC.
Make sure your wireless signals channels don't overlap with other strong wireless signals and space your wireless channels at least 3 or more channels apart.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

WINSXS: The system cannot find the path specified

Would you have any suggestions to help me resolve the error, "DPM encountered an error while performing an operation for
\\?\Volume(....)\Windows\winsxs\ onThe system cannot find the path specified." while performing a Consistency Check?
I performed the following troubleshooting steps, however they all failed:
1. Re-ran the Consistency Check
2. Re-ran Create Recovery Point with Synchronization
3. Excluded the Windows\Winsxs directory
4. Excluded the entire Windows directory
Your help is very much appreciated. Thank you in advance.
- Jenna
Note: Syncs and Recovery Points have been working for this C volume for several months.

Hello,
I have seen a similar error in conjunction with antivirus software. It was a different directory, but it turns out our AV (sophos endpoint protection) was blocking access to it.
If you have an AV running, you could try a clean uninstall and see if the backup works again.
This posting is provided >AS IS< with no warranties.

LGBD390 blu-ray cannot find the access point of WRT160N/3.

Similar Messages

Maybe you are looking for