LI11n Updation FM for WMS

Hi,
I need to update the LI11n t.code with the Count qty and the zero qunatity if the count qty was not there.
FM's BAPI_MATPHYSINV_COUNT nad BAPI_MATPHYSINV_CHANGECOUNT are only used when the inventory management was used.
But here i need ti update for WMS oriented concept.What is the FM i need to use to update the fields of quantty and Zero quantity.
Also i need to check where the zero quanoty checkbox value stored(Tablename).

No Answer

Similar Messages

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

Update Button for every Row of Report

hello,
is it possible to get an update button for every row of a report?
After clicking this button, only this row of the report should be updated.
thanks in advance
dave

Create a hidden item on your page. Call it somehow - P1_KEY. Create other hidden fields
for the rest of the columns you want to update. Create a link per report line. This link will be
inserting the primary key of your record into P1_KEY and the other values you want to
update in the other hidden fields. It will branch to the same page and contain a request - i.e. UPDATE_ROW. Then
you create a process - On Load Before Header - which will
take the value from your item P1_KEY and update the record
in the database by setting the the column values to the
values in your hidden fields. This process will fire upon
request you specified. However, this way you will not be
able to update your text areas, since you will not be able
to transfer this over a link. Also you need to be carefull
about special characters.
Maybe there is a better proposal than this.
Denes Kubicek

Error when activating update rules for R/3 training and event management

hi all,
when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
Message no. RSAU461".
please guide me how to solve this issue.
thanks & regards
Vamshi D Krishna

Hi Vamsi,
Have you followed the following document to implement HR ?
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23

Background job not updating data for some steps of program

We have created a custom program and submitting the standard program RPRCCC_READ_KR1025
which is used for conversion of AMEX credit card files.
Since this program can update data for 1 company id at a time,we have created a background job
for that program with 10 steps and 10 variants of data related to 10 different company codes.
when this job is executed it is not updating data for all the 10 files , sometimes it updates 5,7,etc...
If we execute the other files which didnt update in job manually they are getting updated.
All the files executed with that program can be seen in PRTA transaction.
Regards,
Gautham.
Edit: Solved.
Since the standard program updates the database every time with commit work
there should be some time until the next database update,so we can use wait command
after the submit statement which will do the trick.
Edited by: Gautham Vangaveti on Aug 5, 2010 7:20 PM

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

How to schedule job V3 unserialised Update job for Inventory

Hi gurus,
How to schedule job V3 unserialised Update job for Inventory management
What are the things need to be configured
Thank you

Hi,
In R/3 go to SBIW > Settings for Application-Specific DataSources (PI) > Logistics > Managing Extract Structures > Logistics Extraction Structures Customizing Cockpit
UIn this Screen you can define delta type, and the jog usign the control job option.
Regards,
Dani

Help! Can't update iwork and imovie because "You have updates available for other accounts".

I recently purchased Macbook Pro with iMovie, iwork keynotes, pages and numbers preloaded in the machine. Now the App Store icon indicates that I have updates available. So when I open up app store and click update, I got an warning stating " You have updates avaialbe for other accounts - to update this application, sing in to the account you used to purchase it".
I called tech support. I was told that I must have had another account. But clearly I don't have another account. I'm not alzheimer. If I had another account, I would have remembered it. I used the same account for ipod, iphone, itune for many many years. So I went on the support communities for help. I read some post saying I should add my hard drive to spotlight privacy, then remove it. I tried it, it didn't work. Some said I need to enable something by entering a script to the terminal. I followed the steps, it didn't work. Then some other post said that I should delete the apps, then reinstall it. So stupidly enough, I deleted keynotes to "TEST" if it works. Guess what? I completed removed keynotes from my macbook. I can't even recover it?! At least before I deleted it, I had the old version of keynotes although obsolete, still functional. Now I removed it, I don't even know how to reinstall it.
So, I'm so update and dying for help. Can someone please teach me how to make my Macbook understand that I only have one account and let me update iMovie and iwork? Also, how to restore the accidentally deleted Keynotes?
Thank you!!!

You're just going to have to get back to the support folks with your Apple ID problem - http://www.apple.com/support/appleid/.
They should be able to rectify the problem.
Clinton

I can't update the apps in my ipad once I try it update it says this update not for this Apple ID . I need help plz

I can't update the apps in my ipad once I try it update it says this update not for this Apple ID . I need help plz

Help please any one ?

App Store says update available for iPhone app. Try to install and get the message "the item you are trying to buy is no longer available" for three apps in a row.

App Store says update available for iPhone app. Try to install and get the message "the item you are trying to buy is no longer available" for three apps in a row. Even when I go to the specific app and press Update, the update begins to install then aborts with this error message.iPhone 3GS running iOS 5.1.1. Also very long delay typing each keystroke in this message.

That error message is usually indicative of a problem with the App Store. If you look through the forums, you'll see that a number of people are experiencing the problem. Try again tomorrow.

I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story............... iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I AM USING VR5.0 HOW DO I STOP GETTING UPDATE NOTIFICATIONS FOR BETA UPDATES INSTEAD OF JUST WHEN UPDATE IS FINALIZED FOR GENERAL USE?

MY QUES SUMS UP THE ISSUE.....I ONLY WANT UPDATE NOTIFICATIONS FOR THE FINAL UPDATE OF A NEW VERSION

You settings and such are in a separate place and not in the Firefox program folder as has been the case since the browser was known as Phoenix 0.1
Your settings like Bookmarks, history and such are in a Profile. If you uninstall Firefox and then install same or another version you will find that your settings are still there since it will use the last Profile used unless selected otherwise upon Firefox start.
https://support.mozilla.com/en-US/kb/Profiles
https://support.mozilla.com/en-US/kb/Managing-profiles

Using a LOV in an Update page for a QBE Report

In my QBE Report-based portlet, I have set one of the fields to use a LOV.
When I go into Customize for the portlet, that field uses the LOV, but when I click on the Update link for a row, the same field does NOT use the LOV.
How do I make it use the LOV in the Update page?
Thanks for any help!
Regards
Bryan

Folks --
Is this question a difficult one?
I'd appreciate even a pointer...
Thanks
Bryan

Error while installing Visual Studio Express 2013 with Update 4 for Windows Desktop.

When I try to install Visual Studio Express 2013 with Update 4 for Windows Desktop, I
get the error :
Microsoft Visual Studio Express 2013 for Windows Desktop.The form specified for the subject is not one supported or known by the specified trust provider.
Here is what I get when I use the File Checksum Integrity Verifier (NOTE: I couldn't find the SHA Hash for the .iso I downloaded)
// File Checksum Integrity Verifier version 2.05.
8ab9b5ff10da1c33bb3f088331a7c8d8 vs2013.4_dskexp_enu.iso
Here is some Extra Information:
MY OS: Windows Technical Preview x86ANOTHER OS I TRIED INSTALLING VB ON: Windows 7 Ultimate x86
DOWNLOADED ISO FROM: http://www.visualstudio.com/en-us/downloadsLINK: http://download.microsoft.com/download/9/6/4/96442E58-C65C-4122-A956-CCA83EECCD03/vs2013.4_dskexp_ENU.iso
LOG FILE: http://m.uploadedit.com/b044/1421425243589.txtSHA HASH OF THE RECEIVED ISO: 8ab9b5ff10da1c33bb3f088331a7c8d8
====================================================NOTES:
#I ran the setup as an administrator.
#I do not know the SHA Hash for the ISO so please check if it matches the SHA Hash of the actual file.#Please don't recommend to use the Web Installer.#I tried both extracting the ISO and Mounting the ISO to run the Setup.
Thanks. :D

Solved. The ISO is corrupt.
The SHA 1 Hash of the ISO was 57CF28106EA096758AD6AB909F226A3468D95A49
and the downloaded one returned 8ab9b5ff10da1c33bb3f088331a7c8d8.

Error while maintaining the Update Rules for the Infostructure

Hi,
I have added 2 new characteristics for the existing infostructure S9xx and executed the same. While maintaining the Update Rules for the same, system is giving the error message 1. "Field 'PARVW' unknown" and 2. Error generating program RMCX0011.
Please guide me in resolving the issue.
Thanks & Regards,
Kumar.

Hi,
This is with reference to my earlier question that an error is occuring while maintaining the update rules for the existing Infostructure.
Solution provider for this will be rewarded with good points.
Regards,
Kumar.

Problem while generating Update progam for a Change Document Object

Hi,
I'm trying to deal with Change Document concept in a R/3 4.6C environment and to establish new Change Document object for my (Z)-table. I haven't using any namespace and created object with name ZTEST. Following the online documentation I came to the point, where I have to generate include program. I made all the nessesary inputs (using Z prefix) but faced
"Function module name is reserved for SAP"
Creating everything similarily using some of our registered namespaces (/somenamespace/) I succeed to generate the Update program and to integrate it in my Z-programs as well.
My question is: is it possible to use Change Document Object-names without predefined namespace - being a regular customer developer, but not an SAP developer - means, if I am allowed to manage programs in the customer namespace (Z,Y, X) only. If yes, how to do this?
Further (I decided not to open a new thread) - generated Update program uses
CALL FUNCTION 'xxxxx' IN UPDATE TASK
for creation of Change Numbers for generated Change Document Object. This CALL doesn't work when I implemented it in my Z-program, but when changed (IN UPDATE TASK was commented) - everything goes well and the system creates records in CDHDR/CDPOS tables for my object class and table.
Why is that? According to the documentation I shoud only fill appropriate variables for the Change Document Object (class, tr.code, etc.) and call generated FM, nothing is pointed out about any possible problems? Am I doing something wrong?
Well, to be precise, I think I have to give a sample:
1. I have a sample Z-table with few fields (their data elements are marked as Change-Document relevant).
2. Using own z-progam I created a new record for this z-table. Also fill all the nessesary variables included in the interface of generated FM for Change Document Object (for example - FM-mane CD_CALL_my_object).
3. I call the CDO FM.
4. Check what is happening (directly in both tables CDHDR/CDPOS or using FM CHANGEDOCUMENT_READ).
Further, I perfom the steps from 1 to 4 updating the created in previous loop record in my Z-table.
In both cases if the FM 'CD_CALL_my_object' is called IN UPDATE TASK nothing happens, but in case of direct call (without addition IN UPDATE TASK) the system behaves as expected. Well, obliously I can change the generated code for our production needs, but it doesn't seems to be the correct decision - in case of next possible modification of the Change Document Object definition, respectively in need of re-generation of the code.
Any hints are wellcome.
Thanks in advance.
Ivaylo Mutafchiev
Edited by: Ivaylo Mutafchiev on Jan 24, 2008 10:24 AM

"IN UPDATE TASK" resolved by myself. The one should explicitly call 'COMMIT WORK' from Z-program after CALL FUNCTION '...' IN UPDATE TASK in order to get changes in the CDHDR/CDPOS commited. The key in this issue for me was to check the documentation of CALL FUNCTION :-).
Regards,
Ivo

LI11n Updation FM for WMS

Similar Messages

Maybe you are looking for