LI21Tcode Stock in Quality posted to Writeoff  -Reversal

Hi All,
Has anyone seen this issue,
1) Material is Quality managed and Ware house managed, Stock made GR and is having a Inspection lot.
2) User has done a mistake by doing the Transaction LI21 and write Off, the movement type is 713.
3) Now the stock needs to be reversed, system throws a error message saying the stock is QM related and cannot move the stock.
Has anyone faced this issue and has a solution please let me.
Thanks in Advance,
Navin

HI,
I dont think MB1C is a god option,
this is integration betweem WM & QM, some expert in WM should be able to tell how to reverse this,
Navin

Similar Messages

  • Error while posting stock from quality to return delivery

    Hi ,
    I am working in decentralized warehouse. I am posting stock from quality to return delivery in t code QA32. The following is the error message i am getting . i have also checked the movement type settings they are fine for 553.
    "Posting only to free or blocked stock due to missing goods receipt".
    Please let me know if i am missing any thing in config......
    Thanks
    Ilyas

    Hi Ilyas,
    Can you check again the movement type? For return delivery movement type 122 is used and 553 is for GI scrapping from QI. You can check it in SPRO>QM>QI>Inspection lot completion> Define inventory postings.
    reg,
    Sudhir

  • How to post stock in quality inspection

    Hi all
    we want to post stock in quality by using MB1A t_code

    Hi,
    Activate the QM in Material master for your finished product, as soon as the goods movment is done from PP for the finished prduct the material will move in the quality stock.
    Hope its useful.
    Reward points if useful.
    Thanks..

  • Transfer posting stocks from quality inspection to unrestricted, problem

    Hello Guys,
    kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
    please advise me the correct way to settled this.
    thanks and regards,

    Hello Guys,
    I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
    Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
    Regards,

  • Transfer posting to block stock through quality notification

    Dear QM Experts,
    I am trying to post the material from unrestricted use to block stock through quality notification type Q2. Following are the details.
    1.     Material is batch managed
    2.     Storage location is managed by warehouse management and has storage bin.
    3.     Material has split valuation
    When I click on link transfer post unrestrictedblock system asks to put storage type and storage bin. Here I enter the appropriate details. When I press enter system throws error message as Enter valuation type as the material has split valuation active. Surprisingly I do not find the option to put this valuation type in Q2 notification screen.
    On the contrary when I try to do 344 movment manually through MB1B system gives pop up to select appropriate valuation type.
    Requirement is movement 344 should happen through quality notification considering above constraints. How the valuation type to be entered in Q2 notification?
    I would be grateful, if someone can throw some light on this.
    Thanking you,
    Anand Rao

    Which valuation category do you use in material master accounting view?
    In my experience..
    Normally a company use the batch management for split valuation and a valuation type should be input automatically by transaction in batch master.
    Therefore when you input a material, plant, batch in notification screen, a valuation type would be selected in background by system.
    Anyway try below..
    At transaction MSC2N you input a valuation type into batch master then try to transafer posting through notification.
    I'm not sure why your batch master does not have a valuation type.
    Regards
    Luke

  • Reg.Initially post the stock in quality

    HI
    i want to post the stocks directly in quality.how its possible if i use MB1C-563 mvt.system
    shows error
    "Change the inspection stock of material FT1611R1 in QM only"
    Pl give me some ides to post the stock in quality
    thanks
    selva

    Hi
    In the materialmaster select quality management view for all the material which u want to send to quality Stock
    For raw material maintain inspection type=01
    for sfg and Fg select inspection type=03
    And inspection type 04 for final inspection
    Once you go GR for raw material it will automatically come under quality stock
    and when you confirm production order and do GR for Production order the material will automatically come under quality stock
    once material comes under quality stock
    carry out results recording and do the usage decision
    Regards,
    Raj

  • Stock in quality after posting UD

    Hi experts
    We are facing problem after quality clearance through qa32 some stocks are still showing in quality but entire stock shows in posted & status is showing.In short term characterstics field
    its showing 55,I checked the field it shows the below description
    Number of Outstanding Short-Term Chars Which Require Conf.
    Please any body can guide for the same
    UD   ICCO SPCO STUP
    Regards
    sandeep

    Dear Rajesh
    We are not able to understand this issue,I also tried to clear same stock of material which is lying in quality through MB1b
    through 321 movement type. i am getting the below error.
    as presently we have implemented warehouse Managment we need to transfer all stock of IM to WM so please guide me how to clear this issue.
    Regards
    sandeep
    Change the inspection stock of material G020004P1120 in QM only
    Message no. QA495
    Diagnosis
    You want to make a stock posting to/from the inspection stock. This is not allowed for material G020004P1120 because the quality inspection control has been activated by QM.
    The following cases can occur:
    The inspection stock should be increased, although an inspection is not foreseen for the current goods movement
    The inspection stock should be released, although  you can only do this using the QM transactions.
    System Response
    You cannot carry out the stock posting.
    Procedure
    Check both the QM inspection setup data and the movement type for material G020004P1120 in the quality management view of the material master.
    Exception:
    If you post a return delivery to a vendor with reference to a purchase order, or cancel a goods receipt, the stock indicator from the order is proposed.
    Check and modify this proposal as required.
    The stock may have been transferred already and is therefore no longer in inspection stock.

  • How to revert stock in quality stock after qty issued with movemt type 704

    Hi Experts,
    User issued qty from quality stock to cost centre trough T-Code MI10. Inspection lot against the issue qty has status u201CREL CALC SPCO PRII CROK QLCHu201D This lot has been generated through mov  101 against PO (GR). After doing GR qty posted in quality stock. By mistake user has issued qty from quality stock to cost centre trough T-Code MI10. For same movement type was 704.
    Now they want same qty back in quality stock also they want to do UD for the same. How to get back this stock in quality stock?
    Awaiting for your expert reply.
    Thanks and Regards,
    Sandy

    hi Sandy,
    Quickest and easiest option without lot of configuration and process change for your scneario will be ,
    The transaction code is MB0A.
    The steps for executing the above trancode is as follows.
    Inputs:-
    Posting date : UD date.
    Movement type : 102
    Enter relevant plant, storage location, vendor and the material code
    The purchase order/sch.agreement for the given vendor-matl-plant combination will be displayed.
    Select the correct PO and click adopt selected.
    The material with quantities to be reversed will appear in various line items. Select the correct quantity for which the reversal to be made.
    Click adopt + details
    Enter storage location
    Remove "X" in the stocktype field
    Save.
    Material document will be generated.
    The correct material could be inwarded again and correct usage decision can be taken  against this lot.  
    Get approval from Materials and  Finance guys.   As long as your accounting documents nurlifies each other  ,  you should be good to go.
    If not  you have to use the same proess   witht twiests , with other movement types for which you have activated  inspection type.
    Hope this helps
    Cheers
    Rav

  • Deficit of BA stock in Quality Inspection

    Hi All,
    I have a situation that's a bit complicated.  I hope I don't confuse anyone.  I'm trying to do a UD for an item, but I'm getting a Deficit of BA stock in quality inspection. 
    We purchased 200,000 of an item and a GR was done.  This was done during inventory, the item was physically counted and someone made an error in the count.  At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000.  I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system. 
    Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
    As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
    When we attempt to do a usage decision we get the following error message:
    "49,000 EA incorrect posting to block stock, error msg:
    Deficit of BA stock in qual. insp 49,000 ea:"
    BTW, none of these quantities (The 49,000 or 151,000) shows up in MMBE.   We've tried posting the stock in QA32, but of course it doesn't exist.  What are we missing?

    Hi Xamaica,
    If lot status is ' REL CALC SPRQ' that means  this lot is not canceled, you should be able to post.  If  the lot status would have been  LTCA then selection profile will help you in filtering canceled lots.
    please  give inputs  on following:
    We purchased 200,000 of an item and a GR was done.
    Have you posted the stock of 2 lacks  to unrestricted and then later  inventory was done ?
    This was done during inventory, the item was physically counted and someone made an error in the count. At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000.
    Since system allowed you to do inventory  that means stock of  2 lacks was available that time in unrestricted.
    I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system.
    If inventory is done and only 49000 stock is remaining, document can't be canceled, may be somebody must  have again  done inventory  and removed that  49000 also.
    Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
    As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
    I still believe that the status can't be   REL CALC SPRQ, one more thing, you said  you purchases 200,000 then how you get  two  lots of  151000 and 49000?  what insp type  is activated please  confirm?
    If stocks  are not available then  you should Block the lot  as  nothing is required from this lot.
    If status is 'REL CALC SPRQ'  then go to MIGO and cancel that document strait away.
    Pl check and revert.
    Best Regards,
    Shekhar

  • How to scrap specail stock in quality inspection...

    hi guys:
    I have a query, Is there any possible way to scrap the sale order stock in quality inspection without transferring it to the unrestricted stock and that also through inventory count(mi01,04,07),
    Actually we have damage lighting stock which is received against sale order(automatically transferred to quality inspection), and customers are replaced with new units, then this stock is called back in head office, for this we have a complicated process in use, first this stock is scraped from suppose "a" storage location after transferring it to unrestricted, then loaded back to "a", to make an STR for it from Head Office.
    So is there any way to scrap all special stock(complete storage location) against different sale orders at one go. whether the stock is available in unrestricted, quality inspection or blocked stock.
    I hope I am understood.
    Please help me to get through this complicated process.
    Regards
    Salar...

    Thx you guys are fantastic; I appreciate your help;
    below given is the post which has helped me, but there is some problem at the end, after the click of this point "11. (Click) in the gray box next to the session name and click . " there was nothing to proceed with, though I have posted the count through mi24 and post the difference with mi07, but still want to know what goes wrong with mi31, I have given the appropriate time for back ground processing....one thing to note there were 2 old inventory documents seen to be pending of the same storage location I was posting the count off, is this the reason of problem in processing of mi31,,,,,,please guide...
    Hi Buddy This transaction is used to create physical inventory documents for multiple materials in your plant and storage locations. Inventory documents may be created and printed prior to the count date; however, the posting block should not be set until the day of the actual physical inventory count. 1. From the SAP R/3 System screen, enter transaction code MI31. 2. Click or press Enter. The Selected Data for Phys. Inventory Docmts w/o Special Stock screen displays. 3. Enter or select a value for each of the following required fields: - Plant (enter plant code) - Storage location (do one storage location at a time) - Name of session Remove the checkmark from the Materials marked for deletion field will exclude items previously marked for deletion from the inventory document. The default session name is MB_MI01. Enter your initials and the session number after the default session name to identify it as your own. Example: MB_MI01_WW1 - Max. no. items/doc - use 99 for main storage location; - use 300 for truck storage locations. - Planned count date - enter date of inventory count - Physical inventory number - enter fiscal year followed by plant number and storage location. Example: 2004FY60118071. MI31 Create Physical Inventory Documents (in batch) - Set posting block - check if count is immediate; do not check if creating batch documents ahead of the inventory count date. - Sorting u2013 click on and select Plnt- Stor.bin description-Material. 4. Erase any variants under u201CDisplay optionsu201D. 5. Click . The Batch Input Created for the Creation of Phys. Inv. Docmts screen displays. Enter through any system information messages or errors. 6. Click . The Batch Input: Session Overview screen displays. 7. Click in the gray box next to the session name to highlight row. Click . The Process Session {Session name} dialog box displays. 8. Select the Background radio button. 9. Click . The following message displays: u201CX session(s) transferred to background processingu201D. It takes approximately 5 to 6 minutes for the system to process a batch session. Please wait at least 5 minutes before continuing with Step 10. 10. Click in the gray box next to the session name and click . The Batch Input: Log Overview screen displays. 11. Click in the gray box next to the session name and click . The Batch Input Log for Session {Session name} screen displays. If the batch processing is completed the last line in the Message column should read u201CBatch input processing endedu201D. If this message does not appear on the last line adequate time was not provided for the batch process to be viewed. SAP continues the batch processing in the background. Use transaction MI24 to retrieve a complete list of Physical Inventory Documents created. 11. Record the physical inventory document numbers created. You will need the document numbers to print the inventory documents. Clicking on can print this list. 12. View the log for any errors generated. A material master record being blocked for updates at the time of processing may cause errors. Add the material to a physical inventory document using transaction code MI02. Regrds Yogesh
    Thanks & Regards
    Salar...

  • How to move the stock after quality inspection in wm

    hi ,
       if i am posting GR with PO  for the material XXXX quantity of 10  it should not be posted in Warehouse. after completion of stock inspection in QM then only it moved to warehouse . But the problem is when i post gr in migo the transfer requirement created automatically...if i make this  TR manual, two posting occurs one for gr posting  and another one for manual tr...how to control this....
    ex: matxxx-10 quantity
    migo posted(no stock should be posted in wm)
    after qc--8 quantity o.k
    then we need to move this 8 quantity to storage bin.
    how to achive this process in WM. (i already working manual TR it will create two posting)
    Thanks
    Muthuraman.D

    Hi,
    Use movement type 103 for GR. so, the goods will posted in to blocked stock.  you deselect the auto TR creation for 103 movement type.
    once the Quality inspection over the do the 105 to release blocked stock to unresticted stock. in 105 you activate the auto TR creation.
    Now you may avoid double tr creation.
    this you have to discuss MM consultant also. because of 103 & 105 movement type using.
    SAM

  • QA11   put  from stock in quality  to unrestricted use??

    Hi everybody
    I have a problem with stock in quality control because of Quality Management.
    I would like to put it in  unrestricted use, but I can't because the material need an inspection plan.
    And I don't want to create him an inspection plan, because I have a lot of material.
    So I make a QA11 in order to change the usage decision and put the stock in unrestricted use, I have an error message : "The function you selected cannot be carried out:"
    Then I try LQ02" posting MM in IM, in order to change the stock category, but it's not possible.
    Someone knows MM and QM and could tell How I can put my stock unrestricted use without create an inspection plan.
    Thanks a lot
    Kari

    Hi
    You might have activated Material Master -> Quality Management view Inspection setup with Inspecton type 01 for which default contros activates "Inspection with Task List". As task list is not available during GR, material is posted to Quality stock with automatic creation of Inspection Lot. Status of this lot may be starting with CRTD!
    You have 2 alternatives
    1 - Cancell the GR -> Deactivate Inspection setup and make GR. Ensure that you change the posting to Unrestricted.
    OR
    2. Create Inspection cask list with header information (Usage - 5 & Status -4) only. You may assign all material to same plan. Next execute Change Insp Lot (QA02) and assign Task List to Insp Lot. Now status will change to Rel and system will allow to post stock to Unrestricted

  • Transfer of Stock from Quality Insp. to Unrestricted

    Hi SAP-PP/QM Experts,
    I am doing complete inspection with UD for a particular inspection lot but my stock in Quality Inspection is not transfer to Unrestricted Used stock.I also tried Movt.Type 321 thereafter the stock can't moved.Pl.suggest me the usefull solutions.Helpfull solution will be awarded.
    Prashant

    Dear Venkat,
    There is a  tick mark in post to inspection stock indicator thereafter inspection lot tab in qa32 or qa11 is not activated.
    Secondly, this is a stock item.
    Thirdly, No PS module is implemented in my client
    I think the user has posted  the stock through MB1C with Movt.Type 503 into quality stock.At the time of this posting the 05 inspection type is not activated in QM view of Material Master thatswhy system does not created any inspection lot for this.
      After some days,with out stock posting from inspection stock to unrestricted stock,he has activated 05 inspection stock for the first time.
    Pl.suggest any possible solution .
    Prashant

  • Remove stock from Quality Inspection

    Dear All,
    In material master by mistak quality inspection flag was active in packing material with 01 inspection type.
    When we received material it goes for quality inspection after MIGO. So in MMBE it shows in Quality Inspection.
    Now the Plant in which MIGO was prepared has no quality related data maintained.
    We tried to reverese MIGO document but system not allowing to do as srock is in Quality inspection.
    Is there any way to reverse the MIGO or moving stock from quality to unrestricted?
    Thanks in advance,
    Nirav

    Did you identify the original material document and then try MBST transaction to cancel the document?
    When you use the term "reverse" it sound like you are trying to do a 102 against the 101.  You can't reverse the transaction, you have to use MBST to cancel the transaction.
    Otherwise you have to set up enough QM data to process the lot.
    FF

  • UD Done....Still stock in Quality Block....

    Gurus
    I have done the UD for a material / batch but still stock is reflecting Quality Block (MMBE) against this
    Status for that inspection lot is
    UD PASG CCTD CALC SKIP ICST ICCO QLUP STUP
    Can anyonet tell where am i missing?
    Rgds

    Hello Vicky,
    the note that Craig mentioned is [48815|https://service.sap.com/sap/support/notes/48815] in which you can find the Report ZQEVAC20 which you can use to check and correct inconsistent stock.
    Although according to the status information above I am missing SPCO for the completion of stock postings, could you check in QA13 if the entire stock has been posted.
    You could also check the Table QALT to see if there are any partial lots associated with the named lot.
    Regards,
    Isabelle
    Edited by: Isabelle Britten on Jul 24, 2008 9:52 AM

Maybe you are looking for