Liabilities Ageing report not acknowledging old journal entries

Hello,
I have just upgraded a system from 2007A SP00 PL48 to 8.8 SP00 PL17. When I ran the Vendor Liabilities report in 8.8 I noticed that one of the business partners has a journal entry and an open invoice. The journal entry has no value when displayed in the report however when i open the journal up, it is showing a debit for the exact same amount as the invoice, but was created as a result of a foreign exchange gain and has not been reconciled against the invoice. The ageing report is showing that the invoice is still outstanding and needs to be paid. However when I run exactly the same report in version 2007, the two amounts are seen to conteract each other and therefore no oustanding amount is shown in the ageing report for this customer. When I reproduce the scenario in 8.8 with a new invoice and new journal entry, the two transactions are shown to counteract and no outstanding balance is displayed.
Does anyone know if there is a problem with old journal entries being recognised in the ageing report in version 8.8 or specifically journals created as a result of foreign exchange rate losses/gains?
Many thanks,
Kate

Hi Kate,
We recently upgraded to 8.8 and in reviewing the aging reports realized some manually reconciled entries had to be redone.
In particular, it seemed to be for entries where foreign currencies were involved. There is a new field in the Internal Rec window in the top left corner - select it and the entries with only SC value will then appear (i.e. you will see all unreconciled entries) along with other entries.
HTH,
Heather

Similar Messages

Vendor Liabilities Aging Report

Hi Guys,
We are trying to generate a Vendor Liabilities Aging report on one of our companies, but no data is being displayed. Instead the following error message is being shown "Data is not available; modify the select criteria and re-enter [Message 131-85]". We also tried various options in the selection criteria but still this did not solve our problem.
We are suspecting that this could be related with data corruption since during this weekend we had power failures on MSSQL and SAP servers.
Any help from you guys will be much appreciated...
Many Thanks,
Bernard

Hi Bernard,
Welcome you post on the forum.
It is more than likely the data consistency issue. You must got certain bad data in your database. Run DBCC first to see if the problem can be fixed. If not, report to SAP support to get help.
Thanks,
Gordon

Variable of No of Days Outstanding in Vendor Liabilities Aging Report

Dear Experts,
Which Variable No is use for No of Days Outstanding in Vendor Liabilities Aging Report?
Thanks,
Srujal Patel

Yes I m asking for No of Days Outstanding and I know thats the day.
But as per My Formula only Days are calculate.
1. Eg, 10/11/2011 Due Date 14/11/2011 Aging Date
Result is 4 Days Out Standing thats right.
But
2. Eg. 10/09/2011 Due Date 14/11/2011 Aging Date
Result is 4 Days outstanding thats wrong
Actual result is 65 Days
So, which formula I have use in PLD to get proper result

Adding the Document Total to Detailed Liabilities Aging Report

Hi,
On the Detailed Liabilities Aging Report(Vendor Aging), I would like to add the Document Total from AP Invoice. How can I link to the AP invoice table(OPCH).
Thanks
Krishnan

Hi Krishnan,
This PLD is hard coded report. You don't have any options to link to other fields in the report. If you need that info on the report, you need to create your own.
Thanks,
Gordon

Series not defined for journal entry

Hello Sir
I have defined two series namely "SCPL" and "New1"
                Start No    Last No
SCPL        10001       3000
New1         3001        30000
Now i have made "SCPL" series as default for A/R Invoices and "New1" series as default for rest of the documents like A/R Credit memo,Journal Entry etc...
Now when I try to add an A/R Invoice , it gives me error message "Series not defined for journal entry"..??    But i have defined New1 series as default for Journal Entry

Hi,
In the series defined for journal entry,set document series as default for which default journal entries will be posted automatically.
Ex.For delivey,return,invoice journal entry will be generated automatically,so if you a series like JESYS08 indicating system automated journal entry.This series should be set as default.
If you have further issue let me know.

DTW - Series not deifned for Journal Entry

2007B
Importing AP invoices thru DTW.
using Document Series
The document series assigned for AP Invoice is "APINV" and the same document series is selected for JE also.
The code for APINV is "7"
The field in DTW to define the document series is "Series" and the series code is given (eg : "7")
DTW gives error "series not defined for Journal Entry Application defined or object defined.."
where as when tried to create an AP Invoice manually, it was successful.
what could be the issue?
vijay

I managed to find the issue.
IN the DTW template,
the field, "handwritten' was tYES, which I changed to tNO as we follow document series and numbering series.
nothing is entered in the 'docnum' field.
now I get the error " to generate this document, first define document series'
vijay

Stock Posting does not tally with Journal Entry

Hi Mentors,
I currently trying to see the cause of a particular issue with the JE being created by Stock Posting.
After scavenging the forums, I came across SAP Note 1525960.
Symptom
On creating Inventory Posting in locked Posting Period, system gives error message 'Period is
locked for new data [Message 131-107]'. Keep the window open, go to Posting Periods to
change the Period Status to 'Unlocked', and then click on 'Reconcile' again. Inventory Posting
is successfully added.
The Transaction Value in the Inventory Audit Report is correct. However the Debit / Credit
amounts in the Journal Entry of Inventory Posting are doubled.
The note was created in 2010, filed under SAP Business One 2007. I tried to replicate it, and it holds true for our system, which is currently 2004B.
When I tried to explain the SAP note to our accountant, she said that she did not encounter the error message, since she was the one controlling the period.
So my question is, if there any other factors that could influence the change in the posting of the JE such that the variance being posted in the JE is more than the actual amount(as verified against "Inventory Posting List" and OINM)?
Some facts about our Finance department's practices.
They enter the "Stock Posting" a month later.
E.G. Stock Posting for Oct2011 Stock Variance
System Date: Nov 16, 2011
Stock Posting - Posting Date: Oct 31, 2011
Thanks in advance!
Sean

Hi Sir Gordon,
I already checked using your suggested query:
SELECT * from oinm
WHERE NegInvAdjs != 0
found in this [thread|Re: Diffe Amount posting in Same document].
Unfortunately, 2004B does not have the column "NegInvAdjs". The query failed to execute.
Thank you for the guidance,
Sean

AGEING REPORT NOT UPDATING

After made partly payment to an invoice of vendor, and proecessed it in the outgoing payment, why the ageing report does not reflect the balance of the that particular invoice, instead of showing the original amount and the payment, which makes the ageing report very long and confused. How can I solve this problem? thanks.

There is no problem with AP balance. After payment made, it is reduced. The only one that remain unchanged is doc status. it is still open since the payment is partial. I suggest to cancel the payment and then repaying again. If problem still persists it will be bugs in the PL you are currently using.
Rgds,

Aging report not picking write data

Hi,
My requirement is for vendor 122 within certain period for certain ekorg-c100
and D100 show different amount.
is it possible for vendor aging report.
I developed a vendor aging report for displaying comp-code, vendor, Pur-org,
Total-amount, month wise amount picking from bsik-dmbtr.
I added a field EKORG ( Pur Org ) from lfm1 table with D100 and C100.
And total amount for vendor 122 for a period from 01.01.2009 to 09.09.2009 is 5000/- Rs.
when a new P.O. is crated using Ekorg C100 of amount 2000/-.
My problem is :
After execution of report for same vendor 122 with ekorg c100.
Then it shouid show 7000/- Rs.
And After execution of report for same vendor 122 with ekorg D100.
Then it shouid show 5000/- Rs.
My report is showing same amount in both d100 and c100.
My report is showing same amount 7000/- in D100 and C100 for vendor 122.
Amount picking Bsik table has not ekorg field.
Please let me know how can i do that ?

Thanks for replying. I am sending more info regarding my object.
My requirement is for vendor 122 within certain period for certain ekorg-c100
and D100 show different amount.
is it possible for vendor aging report to show purchase organization wise amount for particular vendor and amount ?
tables , lfa1, lfm1, bsik.
I developed a vendor aging report for displaying comp-code, vendor, Pur-org,
Total-amount, month wise amount picking from bsik-dmbtr.
I added a field EKORG ( Pur Org ) from lfm1 table with D100 and C100.
Report is working fine for displaying Purchase organization.
And total amount for vendor 122 for a period from 01.01.2009 to 09.09.2009 is 5000/- Rs.
when a new P.O. is crated using Ekorg C100 of amount 2000/-.
My problem is :
After execution of report for same vendor 122 with ekorg c100.
Then it shouid show 7000/- Rs.
And After execution of report for same vendor 122 with ekorg D100.
Then it shouid show 5000/- Rs.
My report is showing same amount in both d100 and c100.
My report is showing same amount 7000/- in D100 and C100 for vendor 122.
Amount picking Bsik table has not ekorg field.
Please let me know how can i do that ?

Missing Function - Aging Report not match in System Currency in SBO 8.8

Dear all,
Version: (Please provide the current version)
SBO 8.8 Patch: 10
Description of requirements: (Please provide a detailed description)
In mentioned patch level, the result/outstanding balance of Aging Report in System Currency was difference when selected 'Display Reconcilied Transactions' or not. The outstanding balance should be be same on both selection.
Valid as of: (Date that this legal requirement is applicable)
N/A
Business needs: (Please describe the impact on your business, if the functionality is not realized)
If the Aging Report cannot disppay the outstanding documetns for reconcile with customer, they cannot check with customers.
Examples: (Please describe a typical example, how the functionality should work.)
Generate the Aging report in System Currency
selected 'Display Reconcilied Transactions' including all transactions and balance is same as Trail Balance
un-selected 'Display Receoncilied Transactions' does not inclding the transactions that Local Currency is zero amount, but System Currency is not zero. The outstanding balance is different to the result of the above selection and Trail Balance as well.
Current Workaround: (Please describe the workarounds you are using at the moment)
Print the Aging Report with selected ' Display Reconcilied Transactions' to show ALL transactions to reconcile the transactions.
Proposed solution: (Please suggest how the new functionality should work)
selected 'Display Reconciled Transactions' or not, the outstanding balance should be the same.
Best regards,
Michael

Bapi's do not set sy-subrc. The only way to check if it was succesfull is to loop into the return table for error messages:
You have to use BAPI_TRANSACTION_COMMIT after calling BAPI_PO_CREATE1:
    READ TABLE errmsg TRANSPORTING NO FIELDS
                        WITH KEY type = c_e.
    IF NOT sy-subrc IS INITIAL.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = c_x.
ENDIF.

Aging Report not displaying all BP's

Experts,
I have a client who recently upgraded to 8.8 PL 10. They found that when running the Customer Aging report they did not see all the customers in the list. Even customers with a balance.
I have looked into this and found some confusing results... I make sure that there is no selection on the Customer Codes or groups and that there is only one accounts receivable in the Control account selection (They only have one). With this selection I sometimes got all the customers and sometimes not. I could not determine a common factor.
Is this an issue with 8.8 PL 10?
Any help wold be appreciated.
Marli

Gordon,
Yes, I tried with the Display customers with zero balance selected. Then I could see all the customers.
But the specific customer that did not show up when this was not selected have a balance.
Thanks,
Marli

UDF is not updating in journal Entry rows

Hi Experts,
I have created an UDF in journal entry and trying to insert the values in it based on the transactions.
But the UDF is not getting updated through coding where as same query if i run in the SQL database it is getting executed properly and UDF is getting updated.
Please help in this regard
Thank You
Regards
Md.nazeer Shaikh

Hi,
Please post the code that u are using.
Vasu Natari.

AP Aging report - key date for user entry

Hi All,
We have a requirement to calculate aging buckets like 0-30,31-60,61-90...etc.
I know the key date for this report is created on net due date in SAP standard report.
In standard SAP report , key date is always a system date(SY-DATUM).
What we need for this report is , we need to get all the invoices which are outstanding as of that date(the date which user enters).
If user enters today's date(08/28/07) , he should get all the invoices outstanding till that date in aging buckets and if user enters some date in the past like 07/26/07, he should get all the invoices outstanding as of that date.
Can someone Pls tell me if aging buckets are calculated based on a user entry ?
Regards,
Kumar

Hi Voodi,
Aging in the standard report is being calculated like below...
1.For open items
Posting date<key date
Item status = O
2.Posting date < keydate and clearing date > key date and net due date with offsets on keydate ( key date + 1 - keydate+30 --- for 1-30 days) like wise for all aging buckets.
in this scenarion , key date is always system date ie today's date.
But user wants to get all the invoices based on his user entry...
is this possible with the same standard key date variable or do we need implement any other logic???
Regards,
Kumar

Profit Center Report not include the Invoices entry

Hi Expert,
I want the report of my profit center which will show profit centre details including the dimension.
I have run the following report but not fulfill the requirements
1.The u201CProfit centre reportu201D in this report only u201CJEu201D is comes in report & Invoices post for the u201CProfit centre(Dimension1, Dimension2,Dimension3) u201Cis not included in that report.
2.The u201CGeneral ledgeru201D report it will give the details of invoices but ,it is not showing the Dim1,Dim2,Dim3 in the available column of report.
Plese help me on this.Sap version 8.8 patch 15.

Hi,
You can create your own report by Crystal Report or query report.
Thanks,
Gordon

Vendor Ref No. does not show in Journal Entry for AP Credit

AP Invoice journals show the vendor reference number in field Ref 2. However, when creating an AP Credit memo, the vendor reference number does not show in the journal for the credit memo, instead the field Ref 2 is used for the base document number.
I have two clients who have pointed out that they would expect to see the vendor ref number in the Ref 2 field in the journal when an AP Credit is created, as this is the functionality for Goods Receipts and AP Invoices.
Both clients are currently manually updating the Ref 2 field in the journal for AP Credit, so that in the BP account transactions view they can sort field Ref2 by vendor reference number.
Does anyone have any suggestions on a work around for this?
Thanks,
Lianne Plant

Hi Lianne Plant,
You may check: Journal Ref2 field : AP credit note
Thanks,
Gordon

Liabilities Ageing report not acknowledging old journal entries

Similar Messages

Maybe you are looking for