LibGL not found even though nvidia-libGL installed

Hi,
This is on a fresh install. I'm trying to get LXQT and sddm going, but after I've enabled sddm I just boot to a black screen. I can switch to TTYs. I tried to see if LXQT was working, so I disabled sddm and used exec startlxqt, and libGL.so.1 cannot be found flashes on a screen before it logs me out (I actually had to use a video camera to see what it said). I installed xorg and xorg-xinit and nvidia and nvidia-libgl and nvidia-utils. The journalctl log for sddm says 'Auth: sddm-helper exited with 127'.
Thanks in advance for the help! I apologize for not posing logs and such directly, but I have to type this up on my phone.

when i go to open it tell me that my iTunes folder cannot be found or created and that it should be located in My Music folder.
The best place to start with that one is with the following document:
iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
… but if you run into the complication where “My Music” doesn’t appear as an option in TweakUI, perhaps try the alternate procedure from the following Nigel Carpenter post:
Nigel Carpenter: re: Itunes problem

Similar Messages

JBO-25019: Entity row of key null not found even though key filled in??

Hi All,
I'm using jdev 10.1.2, adf bc's and jsp's.
I have a view object derived from 2 entity objects, which the user is allowed edit. It's a standard adf edit. Even though the key fields are filled in i keep getting this error when the page is submitted... "JBO-25019: Entity row of key null not found in Milk. " where milk is one of the entities
I've checked that the fields are bound, which they are. I created a test method in the app module where i got the current row (i.e. the row i'm editing) and got the key values no problem. I've created the page again, same problem.
This problem occurs in another edit page which uses the same view object. I've other edit pages which use different view objects, but who are based on the same entities and there is no problem.
i cannot understand why. I have tried creating the view object again and creating a new edit page but i still get the same error.
I can't understand why this is happening. If anyone could help, i'd be really grateful.
Thanks in advance,
newbe.

I take your point about not all databases support triggers.
However I am not using DBSequence...the above is a bug surely.For non-oracle SQLBuilders, if RETURNING clause is not supported by the DB in insert/update DML, then to perform refresh-on-insert/update BC4J calls the corresponding entity's doRefreshSQL() method. The javadoc says:
if refresh-on-insert or update setting is set on an attribute which
is a primary key attribute, then this method will fail to fetch the entity as the primary key
in the databse for the equivalent row would have potentially changed. If that's true,
then subclasses need to implement this method and perform "custom" sql to fetch the refresh-attrs
based on some unique criteria for this entity.

Function not found even though it's there.

I get
Exception in thread "main" java.lang.UnsatisfiedLinkError: startUp
at com.directi.foundation.services.rrp1_4.RRPSession.startUp(Native Method)
at
com.directi.foundation.services.rrp1_4.RRPSession.startSession(RRPSession.ja
va:84)
at com.directi.foundation.services.rrp1_4.testTV.main(testTV.java:17)
Even though the function startUp exists in the .so file. The signature matches that in the header file exactly and the function is implemented. I just don't get it.

Make it sure that you obtained a fully-qualified method name - there are lots of ways to get "javah" give you wrong names - so, if your functions is, say, in package com.mypack, class name is Myclass and method name is mymethod - be sure you have a C-mthod name something like:
Java_com_mypack_Myclass_mymethod (...) - if you see any discrepency, that's the reason of your problems.
If you don't manage to get right method name using javah, you may type it yourself - now I almost don't use javah, but just make these headers "by hands" - it's faster.
Additionally, me personally didn't manage to run any method using "old" variant of native calls - that uses "stubs" on new JDK1.3x. So, make sure you don'r use "-old" parameter or old headers, generated by JDK 1.1 or so.

HP Laserjet Pro P1102W not printing even though it's installed...

Hello everyone. I'm relatively new to Arch, especially new with configuring cups. I just bought an HP LaserJet Pro p1102w wireless printer. I set it up on my dads laptop via plugging it into the usb and it automatically ran the setup program and I selected to set the printer up for wifi printing. All went well and the printer works now wirelessly from his computer (Windows 7). I've been working at getting this printer to actually print without error but it refuses.
I'm trying to print from leafpad, just a simple text file with little in it other than "linux test print" in the file. The print queue states "Processing - Not connected?" then it fails and gives me the option to "diagnose" the issue. So I click Diagnose. Then it pops up with a message stating that the "print server not exporting printers". It tells me to enable the "Publish shared printers connected to this system" through the printing administration panel which is in Gnome apparenetly (I'm in XFCE) under System>Administration>Printing from the main menu. In XFCE there is no such area.
I have cups version 1.5.0-1
hplip 3.11.7-2
What else should I do? Apparently the printer was installed successfully. I tried installing it and selecting the HPlip driver which installed fine but wouldn't print. Then I removed that one and installed it using the Apple driver (airprint?) and it won't print either.
I've tried searching for help but all I find is that it will work with hiplip installed... It isn't working with that installed.
I can't access the cups server via a browser. Is that the problem? I've opened the cups config page but I don't understand it and it says allow,deny under localhost or ugh i dont know, something about which users can access the server. Should I remove the "deny"??
Please help me if you can. I'm totally lost and have no idea what to do to get this printer working on my installation of arch. Arch is fully updated as of a few days ago.
Any help would be greatly appreciated. Thank you.
-Brittany

I can't access the cups server via a browser. Is that the problem?
Absolutely.
If you are starting cupsd from DAEMONS in rc.conf is it starting correctly or failing? If your not you should be. if it failing does start manually work?
if it's running you should be able to access via browser. localhost:631
also see/try
$ hp-toolbox
CUPS interface better option IMO tho.
EDIT spelling.... to much scotch B4 posting
Last edited by jwbirdsong (2011-10-20 00:42:38)

Trying to move itunes to another pc. now cant sync, files not found even though theyre showing in itunes

Ive tried to move my itunes to another pc. I copied all onto and external harddrive and transfered to the other laptop. It all shows up in the itunes libruary and i can play them but when i try and sync to my iphone it comes with an exclamation mark and says the original file cannot be found and nothing goes on my phone. Totally stuck and confused!!

Then something did not transfer correctly.
What exactly did you copy? Was it the ENTIRE iTunes folder? If not... start over and copy the ENTIRE iTunes folder.

Xcode 3.1 from Xcode 2.4 - Symbols not found even though library is linked?

Hello all,
I apologize in advance for what seem like a rather noobish question, but my Google-fu has failed me for a few hours now.
I have inherited an Xcode project that was developed 3 years ago for OS 10.3. It needs to be slightly updated and made to run on OS 10.4 and up (PPC and x86), but I can't get the project to compile; I am getting 18 errors about symbols not being found. The symbols in question are contained in a static library, and their function definitions are contained within header files that are included. I am using GCC-4.0 and am linking against the 10.4 SDK. I have included the proper search path for the library in my build settings, added it to my Libraries group and "Link Binary with Library" build phase multiple times, and confirmed that the proper header files are included.
I am unsure what my next step should be here; any advice or links would be most appreciated!

Okay, after running file on my library I get:
[code]
my_library.a: current ar archive random library
[code]
Does this imply that my library is not usable on both architectures? If so, how can I find out which architectures it will work on? I don't think I can get the original source for the static library to recompile.
Thanks so much!

I am trying to restore my ipad mini it gets to so far then says device not found even though it is on itunes

trying to restore my ipad mini it gets to itunes so far then says can not find device

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Ringtone not found even though I can find it

There's an exclamation point next to my purshaced ringtone. However, I can look it up and play the ringtone from my dashboard. How do I get iTunes to find it? Probably an easy fix but I can't figure it out.

Very little can be done to force an "uploaded" song to "match." The process is not 100% accurate and just because a song in the iTunes library is available in the iTunes Store does not mean it will match, for a variety of reasons.

HT2953 i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?

i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

I can't open NEF files of my Nikon D800 in PS CS 5.1 even though I have installed Camera Raw 6.7

I can't open NEF files of my Nikon D800 in PS CS 5.1 even though I have installed Camera Raw 6.7.
What's the problem?
Any solutions?
Thx!

The D800 is listed as needing ACR 6.7/7.1. That raises a red flag that might indicate that 7.1 is needed. Since that requires CS6 you can not use that version. If others confirm you need 7.1 you either have to upgrade or use the DNG converter with latest version, which I think is 8.1.

Error 404-not found? though services are up and security password look fine.

Installed Enterprise Edition on server, Error 404-not found? though services are up and security password look fine.
Thanks in advance,

looks for the logs as why they were down. You can bring the managed server up by running the command
sh ./startManagedWebLogic.sh bi_server1 http://hostname:7001> start_bi_server1.log &
inorder to start the above without password you need to add the username and pwd in boot.properties under /MW_HOME/user_projects/domains/bifoundation_domain/servers/bi_server1/security and for admin server /MW_HOME/user_projects/domains/bifoundation_domain/servers/AdminServer/security
and start the OPMN processes using command line ./opmnctl startall
if any of the serivces wont start check the logs
Thanks,
RM

My 3rd generation iPod nano won't sync because "It cannot be found" even though it will automatically sync when I plug it in.

Hey,
My dad and I both own a third generation iPod nano. ever since I updated our iTunes software, neither his nor my iPod will sync because "the correct disk cannot be found" or "ipod cannot be found" even though it will sync automatically when I plug it in. Does anyone have any idea what is wrong?
Thanks

Try these steps listed below.
1. Run “c:\WINDOWS\system32\devmgmt.msc” (i.e. *Device Manager*), and leave it open for now for later use
2. Start up iTunes
3. Next, connect your iPod.
4. Go to your iPod Settings and select the “Enable disk use” option from under theSummary tab.
5. A dialog box will pop up reminding you that you’ll need to manually eject. Go ahead and hit OK
6. Hit Apply to save changes to the iPod
7. Quickly switch to the Device Manager window and right-click on any item within the window and select “Scan for hardware changes”
8. Finally, switch back to iTunes, and try re-syncing your iPod to see if it helped.
It might not also hurt to trash your iPod's Photo cache if it has one (i.e. you sync photos to the iPod). See this article for information on where to find this folder on your Windows XP machine.
http://support.apple.com/kb/TS1314
B-rock

My macbook won't let me sync music or apps as it says my computer is not authorized, even though when I clicked to authorize it it says that it already is. how do i fix this?

my macbook won't let me sync music or apps as it says my computer is not authorized, even though when I clicked to authorize it it says that it already is. can anybody tell me how i could fix this? iv already tried unarthorising the computer and re authorising it but it still doesnt seem to work

Hey CarlyR_,
Thanks for the question. I understand you are experiencing issues related to iTunes Store authorization. The following resources may help to resolve these issues:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M.

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

LibGL not found even though nvidia-libGL installed

Similar Messages

Maybe you are looking for