Libgtkembedmoz don't excist on ubuntu 8.04

So can I use some other file to render html. Or do I need to download the older xulrunner.
In the new xulrunner the file don't just excist.
The Ubuntu 8.04 is using the Firefox 3

I am using AdobeReader_fra-8.1.2-1.i486 and I get message as it is not possible to find libgtkembedmoz.so when I try
Help / "Perfectionnement sur Acrobat Reader"
(I dont know the exact translation in english, it should be "Beyond Reader", this is the second choice in Help menu)
Message suggests to add directory where is located libgtkembedmoz.so in Edition / Preferences / Internet but I dont have libgtkembedmoz.so installed.

Similar Messages

Flashplayer don't work for ubuntu 12.04lts. I try everythink until now. so, I can not see videoclips from net! any solution, please?

I install adobe, flashplayer include, using ubuntu software center. I can not see any video online.

1. Easiest way:
Open a terminal. Enter
sudo apt-get install flashplugin-installer
restart firefox.
OR
2. install libflashplayer.so manually from canonical,
wget "archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_11.2.202.332.orig.tar.gz"
tar xvzf adobe-flashplugin_11.2.202.332.orig.tar.gz
sudo mv libflashplayer.so /usr/lib/mozilla/plugins
restart firefox
OR
3. install libflashplayer.so manually from adobe,
go to
http://get.adobe.com/flashplayer/
select the tar.gz version instead of apt
tar xvzf install*.tar.gz
sudo mv libflashplayer.so /usr/lib/mozilla/plugins
restart firefox

Jubula autagent, testexec and dbtool don't work on ubuntu

OS: 64-bit lubuntu
Jubula: 64-bit 7.1.00055
I am trying to run autagent, testexec and dbtool from command line, but autagent would return '/usr/local/bin/autagent: 46: exec: ./autagent-lin: not found
', and the other two returned 'command not found' error. I have tried to re-install and try installing 32-bit jubula, but didn't help. But the Jubula application itself works (gets launched, test development, test execution)
root@kelvin-virtual-machine:/home/kelvin/jubula_7.1.00055/jubula# testexec -c "/usr/local/jubula_7.1.00055/jubula/test.xml"
testexec: command not found
root@kelvin-virtual-machine:/home/kelvin/jubula_7.1.00055/server# autagent -p 60000 -v
/usr/local/bin/autagent: 46: exec: ./autagent-lin: not found
root@kelvin-virtual-machine:/home/kelvin/jubula_7.1.00055/jubula# dbtool
No command 'dbtool' found, did you mean:
Command 'btool' from package 'barry-util' (universe)
Command 'dcbtool' from package 'lldpad' (universe)
Command 'dcbtool' from package 'dcbd' (universe)
Command 'pdbtool' from package 'syslog-ng-core' (universe)
Command 'tdbtool' from package 'tdb-tools' (main)
dbtool: command not found

I tried to download the 32-bit Jubula installer from its website, but it wouldnt let me install it because of the bit difference.
How do I install 32bit version of Jubula with apt-get install ia32-libs ?

How to verify if backups are set up and running on Hyper-V with Ubuntu 12.04 on vm ?

I have Windows Server 2008 R2 with Hyper-V installed and Ubuntu 12.04 running on a VM.
I would like to be able to verify if Windows Server Backups are in fact backing up the Ubuntu VM.
From within Hyper-V Manager no snapshots appear for the VM.
I have done a lsmod on Ubuntu to verify if LIS is installed , this is the output:
Module                  Size Used by
vesafb                 13844 1
joydev                 17693 0
hid_hyperv             13164 0
hid                    99559 1 hid_hyperv
mac_hid                13253 0
psmouse                87603 0
serio_raw              13211 0
i2c_piix4              13301 0
lp                     17799 0
parport                46562 1 lp
hv_netvsc              22939 0
hv_utils               13540 0
hv_storvsc             17896 2
hv_vmbus               34543 4 hid_hyperv,hv_netvsc,hv_utils,hv_storvsc
floppy                 70365 0
A ps -ef outputs this:
root       217     2 0 2013 ?        00:00:00 [hv_vmbus_con]
root       218     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       219     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       220     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       221     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       222     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       223     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       224     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       225     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       226     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
root       227     2 0 2013 ?        00:00:00 [hv_vmbus_ctl]
(not the entire output, just what I think is relevant)
When checking the registry on Server 2008 I cannot find the key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WindowsServerBackup\Application Support\{66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
as described how to setup in this link: http://support.microsoft.com/kb/958662
From what I can gather VSS will be able to run without the need to shutdown the Ubuntu VM but the backups are not running when Windows Server Backups run?
How can I verify IF any backups of the VM have run successfully at all?
I am new to Hyper-V - but from what I can see , it seems that no VM backups are running . The normal Windows Server backups are running nightly. I would like them to run together without having to restart/ take offline/reboot the VM.
This is a production server and I need to avoid rebooting as much as possible-

Hi Sir,
        The following daemons must be installed manually for Ubuntu distributions:
VSS Snapshot daemon – This daemon is required to create live Linux virtual machine backups.
KVP daemon – This daemon allows setting and querying intrinsic and extrinsic key value pairs.
To install both daemons, please use the following command:
Copy
# sudo apt-get update
# sudo apt-get install hv-kvp-daemon-init
# uname –r
<kernel release>
# sudo apt-get install linux-tool-<kernel release>
# sudo apt-get install linux-cloud-tools-<kernel release>
Please refer to note 5 , 9 within following article :
https://technet.microsoft.com/en-us/library/dn531029.aspx
As for linux VM running on hyper- v, I would suggest you to try to get further assistance from this forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=linuxintegrationservices&filter=alltypes&sort=lastpostdesc
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Webex is not working on Ubuntu 12.10 & 13.10 :- CWMS 1.5 mr3

Hi,
does CWMS 1.5 mr3 (WebEx) support to Ubuntu 12.10 & 13.10 OS to join meeting ?
OS :- Ubuntu 13.10
Browsers :-Firefox 27 & Chrome 32
OS :- 32 bit
Any information will help us

Hi Pratik,
There are many things that are not supported in CWMS that are supported in the Cloud. CWMS is a brand new product and features are added with any new release. I don't know if Ubuntu was ever considered to be a supported OS with CWMS, but at this time, I know it hasn't been tested, and hence it is not supported.
I don't have any more detais about this.
-Dejan

Ubuntu on Satellite L655-1 KQ

Hello!
I have a Toshiba Satellite L655 1KQ and i don't know if ubuntu or any type of linux is working on it and i don't know where can i find drivers for ubuntu for this laptop.
Anyone can help me?

Hi there
I've been running Fedora 17 and 19 on the L650 (which is more or less the same model) and this works great!
I am sure the Ubuntu-family and cousins will work as well!
All features worked fine (sound, webcam, WLAN, Bluettoth + many hotkeys, HDMI).
However, something which may not be perfect is power-management for the ATi graphics in suspend / resume scenarios.
That's not a Fedora/Ubuntu/....-problem, but more likely an issue with drivers not being perfect.
If you're unit has an Intel graphics you are in a better position!
Have fun!!
BR Tom

Larger Ubuntu ramdisk boot fail

Hi,
I was trying to make a larger Ubuntu ramdisk to accommodate some applications to run on the OpenSPARC FPGA. I followed the instructions in /design/sys/edk/os/Ubuntu/7.10-Gutsy/docs/t1_fpga_ubuntu_gutsy_faq.txt, except that the ramdisk size is increase from 80MB to 160MB. The flow I used is as follows:
    gzip -d ramdisk.ubuntu-7.10-gutsy.gz
    dd if=ramdisk.ubuntu-7.10-gutsy of=vtoc count=1
    dd if=ramdisk.ubuntu-7.10-gutsy of=first.b skip=1 count=1
    mkdir old_mnt
    mount -o loop=/dev/loop0 ramdisk.ubuntu-7.10-gutsy old_mnt
    cd old_mnt
    tar cf ../old_files.tar .
    cd ..
    sync; umount old_mnt
    dd if=/dev/zero of=new_ramdisk count=327680     # 160MB
    /sbin/mkfs -t ext3 -q new_ramdisk
    mkdir new_mnt
    mount -o loop=/dev/loop0 new_ramdisk new_mnt
    cd new_mnt
    tar xf ../old_files.tar
    cd boot
    update_first_second ../../first.b ./second.b
    cd ../..
    dd if=first.b of=/dev/loop0 seek=1 count=1
    dd if=vtoc of=/dev/loop0 count=1
    sync
    umount new_mntI've done this on a Ubuntu-SPARC machine with root access and then transfer the ramdisk file to the development machine where I download the ramdisk to the DRAM and boot OpenSPARC. I've also modified mbfw_config.h to account for the larger ramdisk. However, the ramdisk always fails boot with the following messages:
Sun Fire T1000, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.x.build_122***PROTOTYPE BUILD***, 1788 MB memory available, Serial #66711024.
[yctwo obp #2]
Ethernet address 0:e0:81:5f:2c:ab, Host ID: 83f9edf0.
ok boot Linux root=/dev/sunhv_disk
Boot device: /virtual-devices/disk@0 File and args: Linux root=/dev/sunhv_disk
SILO Version 1.4.13
Allocated 8 Megs of memory at 0x40000000 for kernel
Uncompressing image...
Loaded kernel version 2.6.22
Loading initial ramdisk (8161280 bytes at 0x2000000 phys, 0x40C00000 virt)...
Remapping the kernel... done.
OF stdout device is: /virtual-devices@100/console@1
Booting Linux...
[ 129.141851] rtc_init: no PC rtc found
Loading, please wait...
[ 179.326962] EXT3-fs error (device sunhv_disk): ext3_get_inode_loc: unable to read inode block - inode=24577, bl7run-init: /sbin/init: Permission denied
[ 179.337228] Kernel panic - not syncing: Attempted to kill init!
[ 179.340833] Press Stop-A (L1-A) to return to the boot promSince the hardware, hypervisor and obp boots up correctly, I'm assuming the ramdisk is at fault. Does anyone know how to create a new ramdisk from scratch that's more than 80MB or how to modify the Ubuntu for the larger ramdisk? Or any tips on how to make a larger ramdisk for OpenSolaris will also be helpful.
Thanks,
yctwo

KingX wrote:Looks like all the users having this difficulty have the same ASUS motherboard P5N series. Try checking for any BIOS update by ASUS, pretty sure the problem lies with the board and not with kernel or OS. Just a wild shot by try booting with just one video card instead of the SLi setup. Lastly, does your system gives any beeps when the bios is flashing/disappearing?
I'm running the latest BIOS 1401 from the ASUSTeK website.
I did some experimenting with removing video cards testing each card individually. One card gives me absolutely nothing on the screen so it's dead. I tried the other card on its own and I still get the issue of POST fail.
No beeps from the system at all. I even installed the system speaker to see if it would give me any codes but it doesn't.
One thing I did notice is that after the first BIOS splash screen the system is completely restarting. All of the fan lighting turns off for about a second then comes back on and I get the BIOS splashscreen again.

How can I activate my Photoshop CC?

When downloading PS CC, in order to install it, i got a lot of times 'download is corrupted' warnings and had to do it again. After that a lot of 'expansion is not possible' alerts showed up.
Instaling was no problem but activation was not possible because "this ID was allready used twice on other machines'
In fact I had installed it only on this same PC, after a short time it broke down and I changed motherboard and processor, so I lost my PS CC installation.
How can I activate my PS CC or how can I get rid of the 2 activated PS CC activation that don't excist
wim beuwer

Hi wimb,
Please refer the article: http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html.
Regards,
Romit Sinha

How to install arch 2009.08 from hard drive? Please enlighten me

OK, I admit I am impatient for the installation from the CD drive. Whenever possible and whatever distro I wanna try, I head first to try to install it from the hard drive. I don't remember how many times and how many distros I have done the same to, ubuntu, zenwalk, sidux, fedora, opensuse and of course arch. It rarely failed as long as I followed someone's guide, sth like "install any OS from hard drive", I do not exactly remember. And I did the same in the past with arch. But after 2009.08, it simply didn't work. I've read the article "fast install arch from existing linux system" in the wiki, it didn't work either (by the way, if someone can solve my problem, I think the article should be updated). After it boots, at some stage, it says "Use Hook [archiso]", then tell me "waiting for /dev/archiso for 30 seconds ..." then when the time due, it throws me into a ramfs shell. I've hacked for a long time, but no luck. Then I went back to download the 2009.02 iso, however, it works flawlessly.
I did find some differences in the menu.lst/isolinux.cfg between two version.
In 2009.02, we have
title Boot Arch Linux Live CD
kernel /boot/vmlinuz26 lang=en locale=en_US.UTF-8 usbdelay=5 ramdisk_size=75%
initrd /boot/archiso_pata.img
While in 2009.08, it is
title Boot Arch Linux Live CD
kernel /boot/vmlinuz26 lang=en locale=en_US.UTF-8 archisolabel=ARCHISO_AHCOHH6O ramdisk_size=75%
initrd /boot/archiso_pata.img
I know I can install arch from usb, but I simply wanna know what's wrong here, so guys, if you have any idea, don't hesitate to enlighten me.

Hi, vacant, thanks for the reply. I did not notice you are the author of the article. Actually I missed the head of the article which directs me to another (the amalgamated one you mentioned). I take a look at it, it seems to make things complicated. I still miss the old days: you simply download the iso, mount it and copy all the contents into a separate partition, edit your current grub, then reboot and everything works. I don't understand how Arch could be so evolved to exclude this simple installation scheme. I am not complaining the development of Arch. In my opinion, a distro as flexible as Arch should provide as much installation strategy as possible. In this respect, I think we can learn from Ubuntu or sidux (in sidux, it provides a very convenient kernel parameter called "fromiso" which allows you to install sidux from the plain iso, that means, you even don't have to mount it and copy the contents out of it to a separate partition).
Last edited by plmday (2009-10-25 06:25:44)

Anyconnect 3.1.01065 x64 and Firefox 17

I just installed Linux Mint 14 and I have firefox 17. I installed anyconnect 3.1.01065 x64 and I am able to make it work but, I am unable to connect to my ASA without disabling the 'Block connections to untrusted servers' and, even after removing the checkbox, I have the warning of untrusted VPN server Certificate. If I click on the 'Always connect' button, I am getting an error: AnyConnect cannot confirm it is connected to your secure gateway.
I have done the test with Ubuntu 12.10 x64 version with the same result.
Here is an interesting line I have found in my syslog:
Nov 21 20:54:23 Dom-D830 acvpnui[2768]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 419 The Firefox Certificate store was not found
Please help!!!
Dominique

Same problem here with Ubuntu 12.10 x64 any Anyconnect 3.1.02040. Was working fine with Anyconnect 2.5 x32 though.
Our VPN gateway should fullfill the new certificate requirements.
I did not see that specific error message.

Openoffice + windows share + GNOME/Nautilus

Hi,
I'm trying to edit a windows excel file which is located in a windows share.
I've done this before using Ubuntu's OpenOffice without problems.
When I'm trying to save the changes into the file (after say yes to the Excel format) I'm getting the following error:
"Error saving the document name_of_the_doc: General input/output error while accessing to /home/name_of_user/.gvfs/name_of_share/name_of_the_doc.xls"
I get this twice and a last error which says:
"Error saving the document name_of_the_doc:
General Error
General input/output error."
The funniest thing is that after all those errors a new file is created in the share with the same names plus a sequential number (one for each try). This file has the same content as the original without the changes.
I just migrated from Ubuntu and I really like ArchLinux, but with such a problem I can't even work... Any ideas??
Thank you.
Derek.

Windows shares tend to be read only unless you have the ntfs-3g driver installed, and even then you would be better mounting via fstab than via gvfs. At least that's my experience.
Hi, thank you for your comment SiC! Well, I mostly agree with you but there are two facts which make me relate this problem to OpenOffice exclusively:
1.- The rest of programs (i.e. gedit) can save into that share without problem
2.- I had this configuration under Ubuntu working for months.
Is anyone there who could test the same scenario (that is, saving a windows share located excel 2003 file changed by openoffice 2.4/3, share mounted using gvfs) ?
Thank you.
Derek

XSANE no devices available

Hi,
I used XSANE for scanning for a couple of months, but couple of days ago, it started to tell me that no devices are available.
I have HP Photosmart C3180.
I added my user to scanner group.
I ran sane-find-scanner under my user, gave back no scanners.
I ran sane-find-scanner under root, gave back this:
found USB scanner (vendor=0x03f0 [HP], product=0x5611 [Photosmart C3100 series]) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
tried scanimage -L, which gave me:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
I reinstalled xsane, I tried deleting xsane from .sane at ~, I tried switching it on before the PC. Nothing worked.
I had some problems with my external harddrives (connected via USB 2) because of HAL update (policikit conf editing solved this). Couldn't the HAL cause this problem 2?
Any sugestions?
Thanks. Joenas

Joenas wrote:ok, so XSANE doesnt support it...so what should I do for scanning, any1 scanning with something else then XSANE?
Anyway its strange that it just stopped working... isnt there anyway to tell XSANE that my C3180 is some C3100, that is actually supported (some related scanner) to make it work?
Thx. Joenas
Yeah, It worked with xsane.
I bought the same exact Printer from salvation army for $10 (I think they got it from circuit city when they close all of their stores) and it worked in ubuntu out of the box. (Or at least the scanning function. No ink) But I'm having the same problem with arch and I don't know how ubuntu gets that to work so I can do the same in arch.
Edit: I installed hplip, Did what the post install message said, installed the optional dependencies, edited the /etc/user file and put my name under lp and scanner and ran hp-setup as root and bob's my uncle. (no, really he is , lol)
Last edited by commodore256 (2010-03-11 23:21:12)

SAP EU software component for Web Dynpro SP9

Hi all,
I've followed the tutorial on how to create a Web Dynpro Callable object and couldn't go further because I couldn't find the libraries needed in the Local DC (caf/eu/gp/api/wd) api's.
I've found the Blog from Andre Truong on how to retrieve this API's in your Local Development Component projects (SP7).
/people/andre.truong/blog/2006/06/26/working-with-the-apis-of-caf-guided-procedures-nwdi-or-local-development
Unfortunally this is only working for SP7 (And maybe SP8) but not for SP9.
In the blog Andre mentioned that this problem might be resolved with SP9 because the API's come as default with the IDE.
This appears not to be the case for me.
Does anyone know how to resolve this problem?
PS I also read the following thread and the reply from Tomas Kuba but that seems to be a difficult and dirty way to do it?
Re: Guided procedures & WebDynpro (SAP-EU software component)
Thanks in advance!

Ok, seems to work just fine for SP 9 also.
Only the folders eu and gp don't excists. Just create them and extract the zip files.
Great blog thanks!
Message was edited by:
B. van Prooijen

[SOLVED] Nautilus video thumbnails

Hi everyone! I want to generate video thumbnails with ffmpegthumbnailer in nautilus. I know i can do it by setting a command in the /gnome/thumbnailer section of gconf but i dont have keys for video thumbnails. There is only keys for fonts. Is there any way to add those video keys?
I done this once in ubuntu but now i dont want to install totem.
Thanks.
Last edited by Hyugga (2010-04-12 01:33:03)

For movies I use the imdb-thumbnailer tool (it's in AUR). If I look in the source for the code that registers the thumbnailer, I find this:
for i in $video_extensions; do
gconftool-2 -s "/desktop/gnome/thumbnailers/$i"/command -t string '$THUMBNAIL_COMMAND
gconftool-2 -s "/desktop/gnome/thumbnailers/$i"/enable -t boolean 'true'
done
Search google for the thumbnail command and google for the list of extensions.
Good luck!

Multiple Dropbox instances fail to install

I downloaded the dropbox package v. 1.4.2-1 from the AUR and successfully installed. I then attempted to install a second instance of dropbox just as I have done several times in Ubuntu with the following command in konsole:
HOME=$HOME/.dropbox-alt /usr/bin/dropboxd start -i
The output I get in terminal is
No protocol specified
I have also attempted to use the script for installing multiple dropbox instances that is located here:
https://wiki.archlinux.org/index.php/Dr … _Instances but I get the exact same problem.
Anyone else having this problem?

This is precisely why I had to change the instance home for each new Essbase instance I wanted to create on the server. So by default the instance home is <MIDDLEWARE_HOME>\user_projects\ but when running the configtool you can choose a different instance home and by doing so a new location for the reg.properties file is created.
I wonder if I just deleted the <MIDDLEWARE_HOME>\user_projects\config\foundation\11.1.2.0\reg,properties file, created instances in the usual instance home location and then created a reg.properties file within each instance it would pick up the reg.properties file, or the services would complain about not being able to find the reg.properties? Hope that made sense
Thanks,
-Dan

Libgtkembedmoz don't excist on ubuntu 8.04

Similar Messages

Maybe you are looking for