Libjil.iso missing during run time?
Hi all,
I am new one to jes. I setup jes in Raspbian on Raspberry machine. libjil.iso is missing during run time. Please help me how to resolve the issue.
Thanks a lot.
try to adjust ur repeating fram which prints ur data in ur report.
some of ur data overlaping that's y it cannot display . most of the time character mode reports generate this error. simply adjust ur repeating fram up and down where it fits u problem will solve.
tnx.
Similar Messages
-
Need an option to populate the calculated percentage during run time
Hi All,
I have a requirement in reporting , My report out put contains two key figures based on condition it will populate exceptions (green, yellow, Red) .Now i want calcuate Miss percantage (Marked in Red color in expection)
This Miss percentage to be calculated as per below logic during run time , percentage should populate in out put.
total no of records in report out put / Miss records (which marked red color in out put)*100
Regards
Murali.KHi Murali,
You need to create three CKF.
For calculating Red color count, create a CKF and use the Alert level condition which you have used in Exception.
For Example if your Alert level for red is Value LT 20.
then "Missed Record CKF" will have ( VALUE < 20) boolean calculation. Hope you aware about it.
after that create another "Total record CKF" which calculate the number of records by simply keeping 1.
Then under the third CKF used, SUMGT(Missed Record) / SUMGT(Total Record) * 100.
Regards,
Ashish -
Select serial comm port in sub vi during run-time
Hi, would like to be able to select the comm port (serial RS232) in sub vi to use in main vi during run time. How can I do this? Have tried and failed, for on startup an error occurs because I have not selected a port yet. An example would be invaluable! Thanks alot, Madri
Hi Madri !
What you could do is to intercept the com errors, and open a configuration vi either if there is an init error or if the user has pressed a "Change port" boollean (or menu...). Do not forget to close the previously opened serial port, and to open/init the new one. I have attached a small example of this idea.
Of course com errors can have various origins, and do not require always to change the serial port. So, you have some additional work to do.
Hope this helps
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Select_port.vi.zip 12 KB
Com_with_serial_init_vi.vi.zip 13 KB -
Changing data in the table control during run time of transaction F-28
Dear Experts,
in transaction F-28 of second screen of second column (Field Name: Assignment) currently the data is getting from BSEG table and populating this column of table control, now I have a requirement that the data should be get from the other ZTABLE and populate this column during run time instead of the data from BSEG table, please let me know your suggestions, if you guys feel it will be done using User Exit then please let me know the suitable exit for this.
Best Regards
VenkatHi Venkat,
Use the appropriate sort key in the GL to fill up the assignment field automatically.
U can create ur new sort key through OB16
Regards,
Kiran -
How to get the Title and Tcode of a Program during run time
Hello,
I am new to abap and I have this question please. Is the a way to get the title, Tcode and Author of a program during run time? I would like to get the name and title of a program or a view or an include during run time.
Using table TADIR, you can only get the object_name and the author. Is the a way for me to get the Title of the repository object and any Tcode if any is available for the case of a program?
I loop forward for your respond.
Thank you.
SabinaYou can get it by accessing SYST.
SY-TITLE for Title
SY-TCODE for Tcode
I don't think there is any field in SYST for the Author.
To get the author name you can use the TRDIR table.
Regards,
Naimesh Patel -
In ABAP How to locate an Input file from a Directory during run time
I'm loading data from a flat file(text file) into SAP thru BDC programs. All my input files are present in Application server.How to locate an Input file in a directory during run time to process BDC programs programmatically. Are there any in-built functions?Provided me some sample code or any method of doing the same.
Hello Murali,
you should ask this question in the ABAP forum.
Regards
Gregor -
My Prompt back ground colour changes during run time in Client / Server Env
<p>Dear Friends, </p>
<p> My Prompt of text items are changing its back ground colour according to the Text item's back colour during runtime. This doesn't look good. My look and feel of my application gets spoiled due to this. I tried with Visual Attribute (both prompt & Text item) but of no use. I don't want to use text label as I want to change the prompt during run time. Please help me. </p>
<p> Form during Design time </p>
<IMG SRC="C:\Documents and Settings\Administrator\My Documents\My Pictures\myform1.jpg"></IMG>
<p>Form during Runtime </p>
<IMG SRC="C:\Documents and Settings\Administrator\My Documents\My Pictures\myform2.jpg"></IMG>
<p> Thank you.
Regards,</p>
<p>Senthil .A. Perumal.</p>
<p>My version of forms is Forms [32 Bit] Version 6.0.8.8.0 (Production).
</p>Dear Kevin,
Yes I agree with you, but in my case as this application supports bilingual (English & Arabic), I want to change the prompt of the text at run time. Can I change the text of boilerplate text at runtime?
Thank you for your reply.
Regards,
Senthil .A. Perumal. -
Variable Creation During Run Time
Is there anyway to create new instances of variables during run time based off of user input from a command line prompt. Thnx~!
Depends what you mean .. if you mean the user can type "a = 8", and it creates a variable "a" with the value 8, then no.
But you can implement something very similar using a HashMap. Use put("a", new Integer(8)), or whatever, and then get it out later with get("a"). -
How to hide the Parameter field during Run time?
Hi,
How to hide the Parameter field during Run time?
I have a parameter field which behaves differently depending on the User logged in.
I am using reports 10G
For ex: I have 3 field created in JSP
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user = 'SUPER show all the parameter
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user is 'GATEKEEPER" Just show
PROVIDER
FROM DATE
END DATE
Can I do that?
Please help
Thanks.
KKhi, i'm not familiar much with JSP. but i think workaround is to create two window one which have 4 fields and the other which have 3. if user is SUPER then call the first screen otherwise if user is GATEKEEPER then call the second screen.
-
I get an error when I try to trim my string during run-time??
I am able to get the string inputted in without the trim.. but when i add the trim, the program screws up during run-time..
i have this in my code...
input = in.readLine();
when i put the following afterwards.. it doesn't work:
input = input.trim();
what should i do that I am not doing? or what am I doing wrong?You don't specify what the error is, if it's a NullPointerException then you just need to check
if (input != null) {
String trimmed = input.trim();
... -
Datatypes and names of columns of recordgroup during run-time
Hi everyone,
Can you please tell me that Is it possible to get the datatype and name of columns of a recordgroup during run-time or not. So that I don't waste my time in searching for this solution. If you are not getting my question then please let me know but I need this help very badly.
Thanks
SubodhAfter the call of the methods GET_COLUMN_WIDTH or GET_ROW_HEIGHT
You need to add this command :
CALL METHOD cl_gui_cfw=>flush.
This will send back from the SAPGUI to your ABAP program the new values.
Found in this Thread : Method GET_ROW_HEIGHT
Eric -
Opening Another Flash File during Run Time
I know, this is too easy. How do I open a Flash.exe file
during run time? I know the code below is wrong but some insert the
correction?
open_btn.onRelease = function () {
play("C:\Documents and Settings\GameOfficeFlow.exe");}
Forever in your debt,
Mikeplay() is a timeline command.
I don't think you can have Flash load/play an exe file, but
wait awhile and see if someone else knows better on that one. You
can have it load/play an swf version of a Flash file though. -
Update Indicator label during Run time
Hi all,
This is the situation, i have an Indicator to display Acceleration, Velocity & Displacement. I am using it a local variable in the 2 case structures.
Here is what i want to achieve:
I want to update the Indicator label for the respective Radio Button control. If the click on Acceration button, the label should be updated to Acceleration during Run time. Correspondingly for Velocity and Displacement button.
Can anyone help me how to go about this.
Excuse me if i am not clear about anything.
Thanks in advanceGenerally you should not change the label of a control, because this is often how the control is referred to from elsewhere in the program and it causes confusion.
Instead there is a Caption property. If you right click the control and select Visible Items->Caption, the label is hidden and the caption is displayed instead (with the same text).
In your block diagram, right click on the chart terminal and select Create->Property Node->Caption->Text. This creates a property node for the caption property. You will need to click on it to change it to 'Write' rather than 'Read' - you can then wire whatever text string you like and it will update on the front panel. -
How to Load a Panel during run time from a CVI dll
Hi,
I want to execute/load a panel during runtime, from a CVI dll function.
my CVI dll "test.dll" has "READ_PAN" function. while executing this function from a Test Stand Action step i want Configure Panel (from FR_GUI.uir) to pop up.
can you please suggest me how can i do this from my "test" project of CVI.
int __stdcall __export RunFRConfig (CAObjHandle step,CAObjHandle thisContext)
ERRORINFO errorInfo;
char errMsg[1024];
int pan;
pan = LoadPanelEx (0, "FR_GUI.uir", READ_PAN, __CVIUserHInst);
DisplayPanel (pan);
RunUserInterface();
DiscardPanel (pan);
return 0;
Error:
// sprintf(FinalErrMsg,"Configure Error: %s",errMsg);
return -1;Thanks for ur reply.
Hello Asad,
It is possible to maximize the run time previewer when calling reports from forms. U need to set a parameter named 'MAXIMIZE' to do that.
I m attaching a code sample for u. This is working in my production environment.
DECLARE
pl_id ParamList;
BEGIN
pl_id := Get_Parameter_List('setProposal');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('setProposal');
// This parameter is set to hide parameter form at run time
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
// This parameter is used to maximize previewer window at run // time
Add_Parameter(pl_id, 'MAXIMIZE', TEXT_PARAMETER, 'YES');
Run_Product(REPORTS, 'sample.rep', SYNCHRONOUS, RUNTIME,
FILESYSTEM, pl_id, NULL);
END;
Feel free to contact me if u need anymore assistance.
Take care and bye -
Windows Server 2008 sp2 Task Scheduler missing next run time after restart
Hi,
I have the issue that there does not appear to be a fix for with a server 2008 sp2 (NOT R2) where after a restart all tasks are missing the next run time so I need to edit each task to add this time back in. I have tried the hotfix in KB 950035
but this when you run it is only for Vista and cannot be installed despite saying it's also for Server 2008.
For some reason also this is Task Scheduler version 1 not 2 which I thought came with windows since Vista so SP2 should have it.
Anyone got any ideas?
Thanks,Hi Evans,
Would you please let us know current situation of this issue?
As Dave mentioned, Windows Server 2008 Service Pack 2 include all the previously released updates for Windows
Server 2008.
Based on your description, I understand that all scheduled tasks still miss the next run time on your Windows
Server SP2 when the server restart. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please open Properties of one problematic scheduled task, navigate to History tab, then
check if find some relevant events or errors. Those may help us to go further analyze.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
My Google toolbar was working fine earlier this morning. A few hours later, the search window stopped opening new tabs. I did some snooping and discovered that none of my extension add-ons were showing up in the add-ons tab. However, the appearance a
-
Java.lang.NullPointerException in EBS General forum
The EBS General discussion General EBS Discussion returns the following error on the 5th or 6th thread : An error in the system has occurred. Please contact the system administrator if the problem persists. type: java.lang.NullPointerException java.l
-
Unlike IE, some sites yield overlaps of type fonts, in Lenovo T61 thinkpad
For years I have been unable to view some websites properly; type fonts are garbled or overlayed, entry boxes are distorted. IE renders the sites o.k. The screen is 15.4in on T61, but bad rendering occurs on an external wide screen monitor. Verizon p
-
Security violation from using underscores template
When using the template-function of the well-known underscore.js library I get an error: Adobe AIR runtime security violation for JavaScript code in the application security sandbox (Function constructor). In the browser this works fine. I don't see
-
Hi, I installed the latest drivers from HP for my PSC 1350 all in one printer and scanner. Ok what im facing is that i am unableto use the scanner to scan anything. As matter of fact when i click on the print & fax in the system preference then click