Libm.so.1 and other libraries, missing after install

I'm running into problems because libm.so.1 and some other libraries are missing after install.
- Solaris 8
- Not an LD_LIBRARY_PATH issue, I did a full FIND and it did not show up.
Any information as to why these libraries may have gone missing and what I might do to get around this problem would be appreciated.
Thanks,
-Ken

Cause: The installation which caused this symptomology was based on a boot from a downloaded ISO designated "Installation CD" (Solaris 8). Booting from, and installing based on this CD caused a incomplete installation, with many libraries missing.
Solution: Just by chance, on a re-installation attempt I booted from 'Software 1 of 2 CD" (Solaris 8). Installation based this boot yielded a complete installation - no libraries missing.
Thanks for the suggestions,
-Ken

Similar Messages

  • Python 2.5 and other libraries lost after n900 fla...

    Could someone help me to solve this problem with my device? I have flashed my device fw and emmc after its brick. The flashing seemed successfully, but when i try to install some apps like fm radio it returns an error message in which inform me that some installation packages are lost like python2.5. How could solve this and have a functional device again?
    please, help me.

    if i try to install pygt4 it returns an error message informing me that pytho 2.5 and other lybraries are missed. So i have added maemo extras testing and i have solved. now i can install apps without error message. But i know that extra testing is not safe. i haven't it on my device before tha flasher and i can install all the apps without problems, so i ask what happened. i think i have missed something during the flasher or the nokia have introduced a restriction considering that the ajjara device is new...let me know..thank you

  • Time and Classifieds services missing after installing LabVIEW 8.0

    Hi,
    After installing LabVIEW 8.0 I noticed the Lookout Time and Classifieds services are missing.  At first I thought it was just the Lookout lighthouse in the system tray which had disappeared but when checking in services.msc I can see that the services themselves are no longer there.  The Citadel server is, however.
    I am using Lookout Direct so please let me know if this question is more appropriate on the Automation Direct forums.  I'm trying to change to a NI solution instead but every step is taking me considerable time.
    Thanks,
    Dave

    Try to repair Lookout Direct from Windows Add/Remove Programs. The missing services should be reinstalled after repair.
    Ryan Shi
    National Instruments

  • Where did project and event libraries go after installing mavericks? How to restore?

    Recently installed Mavericks.  Now both the event and project libraries are blank.  How can they be restored?

    Are you referring to iPhoto or iMovie?  If it's iPhoto then what version of iPhoto are you running?  Have you updated to iPhoto 9.5? If so what version did you have previously?
    As a first attempt try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
    Can't help you with iMovie.
    OT

  • Pixel artifacts and other graphical irregularities after install

    Hello all.
    Just did an archive and install of Leopard, and everything seems to be working right--except there are odd graphical irregularities popping up in windows.
    An example of what I'm talking about is here:
    http://just-in.org/etc/artifacts.png
    You'll see two lines of irregular pixels. These are not on the screen, but rather attached to the window itself. When I move the window around the pixels move with the window.
    Has anyone else ran into this? Normally I'd say this is a driver problem, but since OSX has the latest driver I'm kind of stuck.

    This is a screen shot from the main display on my MBP. If I remember correctly, when I have my external display plugged in (snugly), it also occurs on that display. Moreover, I think if it were a hardware issue, then it would not show up in a screen shot. I know what loose video cable connections look like (at least from the DVI-out port) and this is not what they look like. The distortions also follow the window and have a tendency to appear/change/disappear if there is a redraw of the window.
    There are also other redraw errors occurring--random distortions of windows and icons that usually fix themselves when redrawn.
    In short, to me it appears to be a graphics driver/graphics card corruption problem. I am considering doing a complete clean install to see if that changes anything. Fortunately I make more backups than I know what to do with, so that's an option.
    It might also have something to do with the heat generated by the computer. I've noticed that when the MBP is cool, the lines tend not to appear. When it heats up, however, the lines tend to appear more often.
    Further, I have been experiencing random freezes with Leopard, which may or may not be connected to this issue.
    On a side note, I've basically kept the same home folder since OS X 10.0 and I've only reinstalled OS X one or two times in the past 5 or 6 years. Who knows what corruptions I am bringing with me through all these OSes and machines!
    Message was edited by: Craig Linton

  • HT4477 One complete family file missing after installing iPhoto 11 ??

    One complete family file of photo's is missing after installing iPhoto 11. Installation went smoothly, and all other files complete. Have checked thru entire photo lists, including photo list at the top. Found two photo's in that should have been in that photo list that were downloaded 2 months prior to installing iPhoto 11. I keep files of each family branch on left side iPhoto window. Only the one file is missing. ????

    I meant folder. Have 6 kids, and to keep track of each family quickly, I set up folders on left side of iPhoto. All others are there.

  • Installed and used Gravity (once after installing-...

    Installed and used Gravity (once after installing-) but not able to find in menu/prog. manager?
    Ovi Store says it is installed but now nowhere to be found on the 5230.
    Help please - this is a really cool app. that I am keen to keep using.

    As Chanchan says viruses don't affect S^3 phones , so if you had one , you wouldn't need to worry ! Fortunately they don't affect S60 5th edition phones either If you purchased Gravity you will have a licence attached to your phones imei numberand so can download and re-install again free of charge, as the licence will be recognised by the application, which should appear in the applications folder on your phone, or in one of the folders in there, the latest version of Gravity is available here
    http://mobileways.de/latest/gravity-beta.sisx/?build=6812
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Has anyone's screen go blank and not boot up after installing the new yosemite OS

    has anyone's screen go blank and not boot up after installing the new yosemite OS

    Hi Mofimac,
    Thanks for visiting Apple Support Communities.
    If your Mac is only starting up to a blank gray or white screen after updating OS X, you can find some useful troubleshooting steps in this article:
    Mac OS X: Gray screen appears during startup
    I recommend going through these first three sections first:
    Disconnect, test peripheral devices and network cables
    Perform a Safe Boot
    Reset the NVRAM / PRAM
    Best Regards,
    Jeremy

  • Temperature very high and batterilife too short after installing mountain lion, and after updating 10.8.2

    i have a 15-inch, Late 2011 macbook pro and i have this problem : temperature very high and batterilife too short after installing mountain lion, and after updating 10.8.2, i dont know what to do, im only using safari and the fan are runing veri high because of the temperature

    Same here and no any answers

  • My Yosemite startup screen (grey mac logo and bar) has frozen after installing. The progress bar is stuck at halfway.

    My Yosemite startup screen (grey mac logo and bar) has frozen after installing. The progress bar is stuck at halfway.
    H

    I've had the same issue and despite clearing the PRAM and powering on and off repeatedly this is what has (at least temporarily) resolved my issue:
    I've done this 3 times and sometimes it works right off the jump other times I've had to wait a bit and try again or power off and try again, once the start up screen is frozen hit Command : Option : Shift : Esc and a window should pop up "You restarted because of a problem..." from there you can go to your desktop. I haven't found an actual resolution to fix the problem but this does get you into your computer.
    Hope this helps!

  • HT201974 I just installed a wireless cable modem for a desktop PC and my MacBook Pro;  After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password.

    I just installed a wireless cable modem for a desktop PC and my MacBook Pro;  After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password. Can anyone help?

    Hi twinkytomes,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    AirPort Utility 6.x: Password-protect your wireless network
    http://support.apple.com/kb/PH5119
    Cheers,
    - Judy

  • IPhoto 04 and iMovie 04 missing after tiger installation

    hi guys, hope anybody can help me.
    got my hands finally on mac os x tiger, so formated my hard disk and installed it. afterwards I tried to reinstall iLife 04 by using the recovery dvds for mac os x panther, which were delivered together with my powerbook 15", 1,33 Ghz.
    installation went fine as I could see (chose the complete install) but after finishing it, iphoto and imovie are missing now. idvd and all other included stuff was installed completely. I tried to install it again but the installation programm tells me that there are no further packages to install left on the dvds.
    if i search for iphoto or imovie with spotlight, it only finds some automator skrips but not the complete programmes. I also checked the dvds for the install packages to install it manually but couldn´t find anything.
    so...any ideas how i can restore iphoto and imovie on my system? don´t wanna reinstall everything completely

    Try using Pacifist to locate them on the restore disks and extract and install.

  • My iPhoto and iMovie go missing after upgrade to Mavericks. How do I get it back?

    I recently upgraded to Mavericks and my iPhoto and iMovie went missing.  How do i get it back. I do not want to pay for it.

    First if you haven't done so already click on the Apple Logout > and make sure you don't have more than one user account...  If you don't log back in and see if your files came back.  Try this: 
    press command + space keys > Search for terminal then hit enter. 
    from command line > type: cd ~/Documents (or Desktop or Pictures just depends where you had your files)
    then type: ls -a (this will list all files even hidden ones let me know if you see your files or not)
    *Note: Be sure to read the instructions carefuly and ask questions if you don't understand something.

  • Sound missing after installing windows 8.1 pro.

    hi. i have a problem. after instaling windows 8.1 pro , sound is missing. i in device manager everything is fine. instaled every driver.
    product name:  laptop hp 620.
    a day before this, i had windows 7 and everything worked fine.  tried everything. i dont know what else to do. if i dont find a solution then i go back to windows 7 ((

    Hi:
    The only suggestion I can offer would be to try a W8.1 IDT audio driver...
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp...

  • Libraries missing while installing Oracle 11.2g on Oracle Linux 6.2

    Hi,
    i just installed oracle linux 6.2 and started to isntall Oracle 11.2g server.
    so first i installed the yum install oracle-rdbms-server-11gR2-preinstall_
    but when i run the prerequisite check on OUI it shows some libraries missing. the issue is that the libraries are installed but the version doesn't match.
    ex: when i query rpm -q libaio it shows that i have installed libaio-0.3.107 but in OUI it shows that libaio-0.3.105 is missing.
    is this normal or should i go and install also the previous versions of the missing libraries?

    Thanks for your quick response... but;that's the problem... I don't know what path/directory should I use... I know that the RPM is installed:
    Line: -----
    Command:
    # rpm -qil libaio-0.3.107-10.el6.i686
    Output:
    Name : libaio Relocations: (not relocatable)
    Version : 0.3.107 Vendor: Oracle America
    Release : 10.el6 Build Date: Tue 06 Jul 2010 10:32:58 AM CDT
    Install Date: Thu 10 May 2012 12:54:11 AM CDT Build Host: ca-build19.us.oracle.com
    Group : System Environment/Libraries Source RPM: libaio-0.3.107-10.el6.src.rpm
    Size : 32198 License: LGPLv2+
    Signature : RSA/8, Mon 03 Jan 2011 02:07:00 PM CST, Key ID 72f97b74ec551f03
    URL : http://git.kernel.org/?p=libs/libaio/libaio.git
    Summary : Linux-native asynchronous I/O access library
    Description :
    The Linux-native asynchronous I/O facility ("async I/O", or "aio") has a
    richer API and capability set than the simple POSIX async I/O facility.
    This library, libaio, provides the Linux-native API for async I/O.
    The POSIX async I/O facility requires this library in order to provide
    kernel-accelerated async I/O capabilities, as do applications which
    require the Linux-native async I/O API.
    /lib/libaio.so.1
    /lib/libaio.so.1.0.0
    /lib/libaio.so.1.0.1
    /usr/share/doc/libaio-0.3.107
    /usr/share/doc/libaio-0.3.107/COPYING
    /usr/share/doc/libaio-0.3.107/TODO
    Line: -----
    which directory should I use as {real_file}?
    ln -s {real_file???} {alias_name}

Maybe you are looking for