Libqtawt.so problem in runing demo application of Personal Profile

Hi,
I have installed j2me pp1.1 on Redhat Linux. When I try to run the demo application,
$./bin/cvm -cp democlasses.jar personal.DemoFrame
it shows error
java.lang.UnsatisfiedLinkError: /home/linux-x86-suse/lib/libqtawt.so
Anyone got a solution?
I tried running nscd, but that didn't workout. What could be the issue.. Pls help..
regards,
Anand

I have found the reason of this error,that beacause I didn't set QT path
you must do follow of setting
export QTDIR=%QtInstallDir
export PATH=$QTDIR/bin:$PATH
export LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH

Similar Messages

Transaction failed in Demo application

Hi,
I have a problem getting the demo application working properly. In de debug monitor I get the following messages:
HSD0004F EMP Transaction Failed
Server Error : HSD-00213 Employee 22; An employee with job SALESMAN must have a value for Commission.
11:59:34 - QMS_TRANSACTION_MGT.CLOSE_TRANSACTION by cg$hsd_employees
11:59:34 - HSD21.HSD_EMP_CAPI.need_br_emp005_trs (f)
11:59:34 - HSD21.HSD_EMP_CAPI.need_br_emp004_ent (f)
11:59:34 - QMS_TRANSACTION_MGT.ADD_BUSINESS_RULE BR_EMP003_TPL
11:59:34 - HSD21.HSD_EMP_CAPI.need_br_emp003_tpl (f)
11:59:34 - HSD21.HSD_EMP_CAPI.need_br_emp002_att (f)
11:59:34 - HSD21.HSD_EMP_CAPI.need_br_emp001_att (f)
11:59:34 - QMS_TRANSACTION_MGT.OPEN_TRANSACTION by cg$hsd_employees
It looks like the business Rules are put on the stack but after executing the Business Rules there a problem getting the error-messages on a message-stack (?).
In forms I only get a pop-up error message with 'transaction failed' while I expected to get the Transaction window (QMS$TRANS_ERRORS) with the HSD-00213 error-message.
any suggestions??
Edward

What version of the following objects do you have? (I'm assuming you are using Headstart 2.1.2 up through Patch 12.4. If you are using the Headstart 6i beta release, substitute '65' for '50 below.)
qmslib50.pll
qmsevh50.pll
qmsolb50.olb
qms$errors
cg$errors
You are clearing opening and closing the transaction correctly and the error is being recognized.
The display of the transaction errors window should be handled via the on-error trigger in qmsevh50. Each form should have a block and window for the transaction errors window (both modal and modeless). The on-error trigger should be calling qms$forms.push, which in turn reads all messages from the stack in cg$errors and displays them in the transaction error window.
The problem has to be somewhere in this area. Since this works fine for many installations, I can only assume that you have an incompatible version of one of these files somewhere.
Regards,
Lauri

Problem in build Oracle Fusion Store Front Demo Application

I downloaded the "Oracle Fusion Store Front Demo Application" from http://www.oracle.com/technology/products/jdev/samples/fod/index.html,
and tryed to build it after fininshing editing the "build.properties" in JDeveloper 11g, but four errors appeared ,the message in the log window is:
D:\jdeveloper11\workspace\fod\Infrastructure\Ant>
D:\jdeveloper11\jdk\bin\javaw.exe -classpath D:\jdeveloper11\jdev\lib\ojc.jar;D:\jdeveloper11\ant\lib\ant-oracle.jar;D:\jdeveloper11\jdev\lib\jdev.jar;D:\jdeveloper11\ant\lib\ant-apache-regexp.jar;D:\jdeveloper11\ant\lib\ant-jdepend.jar;D:\jdeveloper11\ant\lib\ant-icontract.jar;D:\jdeveloper11\ant\lib\ant-vaj.jar;D:\jdeveloper11\ant\lib\ant-apache-oro.jar;D:\jdeveloper11\ant\lib\ant-junit.jar;D:\jdeveloper11\ant\lib\ant-swing.jar;D:\jdeveloper11\ant\lib\xercesImpl.jar;D:\jdeveloper11\ant\lib\xml-apis.jar;D:\jdeveloper11\ant\lib\ant-apache-log4j.jar;D:\jdeveloper11\ant\lib\ant-trax.jar;D:\jdeveloper11\ant\lib\ant-apache-bcel.jar;D:\jdeveloper11\ant\lib\ant-stylebook.jar;D:\jdeveloper11\ant\lib\ant-xslp.jar;D:\jdeveloper11\ant\lib\ant-jai.jar;D:\jdeveloper11\ant\lib\ant-javamail.jar;D:\jdeveloper11\ant\lib\commons-net-1.3.0.jar;D:\jdeveloper11\ant\lib\ant-apache-resolver.jar;D:\jdeveloper11\ant\lib\ant-xalan1.jar;D:\jdeveloper11\ant\lib\ant-weblogic.jar;D:\jdeveloper11\ant\lib\ant-commons-net.jar;D:\jdeveloper11\ant\lib\ant-jmf.jar;D:\jdeveloper11\ant\lib\ant-launcher.jar;D:\jdeveloper11\ant\lib\ant-apache-bsf.jar;D:\jdeveloper11\ant\lib\jakarta-oro-2.0.8.jar;D:\jdeveloper11\ant\lib\ant-starteam.jar;D:\jdeveloper11\ant\lib\ant-netrexx.jar;D:\jdeveloper11\ant\lib\ant-jsch.jar;D:\jdeveloper11\ant\lib\ant.jar;D:\jdeveloper11\ant\lib\ant-commons-logging.jar;D:\jdeveloper11\ant\lib\ant-nodeps.jar;D:\jdeveloper11\ant\lib\ant-antlr.jar;D:\jdeveloper11\jdk\lib\tools.jar -Djdev.ant.port=1825 -Dant.home=D:\jdeveloper11\ant -Djdev.ant.debug.port=1826 org.apache.tools.ant.Main -logger oracle.jdevimpl.ant.runner.OutOfProcessAntLogger -inputhandler oracle.jdevimpl.ant.runner.OutOfProcessInputHandler -f D:\jdeveloper11\workspace\fod\Infrastructure\Ant\build.xml -Doracle.home=D:\jdeveloper11\ -listener oracle.jdevimpl.debugger.ant.DebugBuildListener buildAll
Buildfile: D:\jdeveloper11\workspace\fod\Infrastructure\Ant\build.xml
Debugger connected to local process.
createDatabase:
refreshSchema:
BUILD FAILED
D:\jdeveloper11\workspace\fod\Infrastructure\Ant\build.xml:16: The following error occurred while executing this line:
D:\jdeveloper11\workspace\fod\Infrastructure\DBSchema\build.xml:89: The following error occurred while executing this line:
D:\jdeveloper11\workspace\fod\Infrastructure\DBSchema\build.xml:54: The following error occurred while executing this line:
D:\jdeveloper11\workspace\fod\Infrastructure\DBSchema\build.xml:26: java.sql.SQLException: Io 异常: The Network Adapter could not establish the connection
Total time: 4 seconds
Process exited.
Debugger disconnected from local process.
note:
I have followed the "readme.html" in the "fod.zip" file exactly,
also there is no problem with my network adapter ,I can connect to the Internet without any problem;
Can someone give me the answer?

I also have this problem. When I build the build.xml file, errors happen:
Buildfile: D:\soft\jdevstudio1111TP2\mywork\storefront_techpreview2\Infrastructure\Ant\build.xml
createDatabase:
refreshSchema:
BUILD FAILED
D:\soft\jdevstudio1111TP2\mywork\storefront_techpreview2\Infrastructure\Ant\build.xml:20: The following error occurred while executing this line:
D:\soft\jdevstudio1111TP2\mywork\storefront_techpreview2\Infrastructure\DBSchema\build.xml:89: The following error occurred while executing this line:
D:\soft\jdevstudio1111TP2\mywork\storefront_techpreview2\Infrastructure\DBSchema\build.xml:54: The following error occurred while executing this line:
D:\soft\jdevstudio1111TP2\mywork\storefront_techpreview2\Infrastructure\DBSchema\build.xml:26: D:\softjdevstudio1111TP2\jdbc\lib not found.
Total time: 0 seconds
My build.properties is set as following (meanwhile, I can connect database 10gR2):
# Master Ant properties file for Fusion Order Demo
# All build files refer to this master list of properties
# $Id: build.properties 812 2007-02-20 07:14:33Z lmunsing $
# Base Directory for library lookup
jdeveloper.home=D:\soft\jdevstudio1111TP2
src.home=..//..
# JDBC info used to create Schema
jdbc.driver=oracle.jdbc.OracleDriver
jdbc.urlBase=jdbc:oracle:thin:@localhost
jdbc.port=1521
jdbc.sid=orcl
# Information about the default setup for the demo user
db.adminUser=system
db.adminUser.password=welcome1
db.demoUser=FOD
db.demoUser.password=welcome1
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP
--------------------------------------------------------------------------------------

Problem in extracting the Fusion Order Demo Application

Hi,
I am trying to download the Fusion Order demo application and when extracting the zip folder getting the below error message. So, could you please get me the file or location where can get this file : FusionOrderDemo_R2.zip
Cannot open file: it does not appear to be a valid archive
Thanks,
Raghavendra

Similar problem reported here. Re: Unable to extract schema file for Fusion Order demo application
Would be interesting to understand what the issue is. Can you try the suggestions mentioned on the other thread and report back?

Oracle Fusion Order Demo Application

Hi,
I downloaded this DEMO :
Oracle Fusion Order Demo Application
http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html
And when in step
9.In the application navigator, under the Resources node, Right click build.xml and choose Run Ant Target > buildAll
I receive this error :
Buildfile: E:\Jdev_sources\Infrastructure\Ant\build.xml
init:
    [mkdir] Created dir: E:\Jdev_sources\Infrastructure\Ant\classes
    [javac] Compiling 1 source file to E:\Jdev_sources\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
E:\Jdev_sources\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
E:\Jdev_sources\Infrastructure\DBSchema\build.xml:100: The following error occurred while executing this line:
E:\Jdev_sources\Infrastructure\DBSchema\build.xml:63: The following error occurred while executing this line:
E:\Jdev_sources\Infrastructure\DBSchema\build.xml:28: E:\Jdev_sources\Infrastructure\Ant\wlserver_10.3\server\lib not found.
Total time: 14 secondsEffectiveley E:\Jdev_sources\Infrastructure\Ant\wlserver_10.3\server\lib does not existe but it should be (seems to me) a part of whet was downloaded.
Thank for help.

Hi again, and thanks to all.
I reinstalled all and Now I have the followings that seems to be a connectivity problem :
First the parameteres in build.properties :
jdeveloper.home=E:/Oracle/Middleware/jdeveloper
src.home=..//..
# JDBC info used to create Schema
jdbc.driver=oracle.jdbc.OracleDriver
jdbc.urlBase=jdbc:orcl:thin:@localhost
jdbc.port=1521
jdbc.sid=ORCL
Buildfile: E:\Jdev_source\Infrastructure\Ant\build.xml
init:
    [mkdir] Created dir: E:\Jdev_source\Infrastructure\Ant\classes
    [javac] Compiling 1 source file to E:\Jdev_source\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
E:\Jdev_source\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
E:\Jdev_source\Infrastructure\DBSchema\build.xml:100: The following error occurred while executing this line:
E:\Jdev_source\Infrastructure\DBSchema\build.xml:63: The following error occurred while executing this line:
E:\Jdev_source\Infrastructure\DBSchema\build.xml:28: java.sql.SQLException: No suitable Driver for jdbc:orcl:thin:@localhost:1521:ORCL
Total time: 32 secondsOracle is installed on the same server and DB is on the same server.
E:\Jdev_source>cd E:\oracle\product\10.2.0\db_1\jdbc\lib
E:\oracle\product\10.2.0\db_1\jdbc\lib>dir
Volume in drive E is Data
Volume Serial Number is E856-5E27
Directory of E:\oracle\product\10.2.0\db_1\jdbc\lib
13/11/2009 14:21 <DIR> .
13/11/2009 14:21 <DIR> ..
02/02/2008 14:49 1 609 607 classes12.jar
02/02/2008 14:49 1 622 075 classes12.zip
02/02/2008 14:49 1 617 382 classes12dms.jar
11/02/2008 19:52 1 646 217 nls_charset12.jar
02/02/2008 14:49 1 555 682 ojdbc14.jar
02/02/2008 14:49 1 563 375 ojdbc14dms.jar
02/02/2008 14:49 1 958 237 ojdbc14dms_g.jar
02/02/2008 14:49 1 950 033 ojdbc14_g.jar
8 File(s) 13 522 608 bytes
2 Dir(s) 7 992 795 136 bytes free
Regards.
Ok finaly it was this :
jdbc.urlBase=jdbc:oracle:thin:@localhost
If you look above , before, I had :
jdbc.urlBase=jdbc:orcle:thin:@localhost
:=(((
Now :
BUILD SUCCESSFUL
Total time: 35 seconds
Thanks again.

Charts in Apex 3.2 demo application do not display in Firefox browser

Hi,
just installed Apex 3.2 and launched the demo application using Firefox 3.5.7
The charts are not displayed. Switching to MS Internet Explorer everything works fine.
Is Firefox not supported or any idea what's missing to display the charts ? Adobe flashplayer 10 plugin and Adobe SVG 3.0 are installed on
my WIN XP client.
Regards, Werner

It kept bugging me .. so I worked on it a bit.
The charts actually show, then get hidden by the noplugin funciton.
The problem is in Firefox ( the (ns || mo || !win) branch) the plugin check does not work.
When I use either this, the check for SVG feature:
function supportsSvg() {
return document.implementation.hasFeature("http://www.w3.org/TR/SVG11/feature#Shape", "1.0")
and
hasSVGSupport = supportsSvg();
or a check by mime types , like this:
var hasSVGSupport = false;
if (navigator.mimeTypes != null && navigator.mimeTypes.length > 0) {
if (navigator.mimeTypes["image/svg-xml"] != null)
hasSVGSupport = true;
I get the correct result and the charts display (remain displayed).
I simply modified plugins.js and use my modified version instead.
if (ns || mo || !win) {
if (hasSVGSupport) {
null;
} else {
noPlugin('svgRegion');
Hope this helps,
K

Setting Up the Fusion Order Demo Application, error in import Fod schema

Hello,
using Jdev11R1 ,Setting Up the Fusion Order Demo Application, and modify the properties in build.properties for my environment , but i don't undersatnd what is (src.home=..//..)
i followed the instraction to get demo FOD schema , right-click build.xml and
choose Run Ant Target > buildAll.
i got this
Buildfile: C:\FOD_11\Infrastructure\Ant\build.xml
init:
[javac] Compiling 1 source file to C:\FOD_11\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
C:\FOD_11\Infrastructure\Ant\build.xml:52: The following error occurred while executing this line:
C:\FOD_11\Infrastructure\DBSchema\build.xml:91: The following error occurred while executing this line:
C:\FOD_11\Infrastructure\DBSchema\build.xml:56: The following error occurred while executing this line:
C:\FOD_11\Infrastructure\DBSchema\build.xml:28: C:\FOD_11\Infrastructure\Ant\wlserver_10.3\server\lib not found.
Total time: 6 seconds
thanks
greenApple

I ran into the same problem. If the jdeveloper.home was set like below:
jdeveloper.home=C:\oracle\Middleware\jdeveloper
A Run Ant Target buildAll would produce the following:
Buildfile: E:\source\java\FOD_11\Infrastructure\Ant\build.xml
init:
[javac] Compiling 1 source file to E:\source\java\FOD_11\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
E:\source\java\FOD_11\Infrastructure\Ant\build.xml:52: The following error occurred while executing this line:
E:\source\java\FOD_11\Infrastructure\DBSchema\build.xml:91: The following error occurred while executing this line:
E:\source\java\FOD_11\Infrastructure\DBSchema\build.xml:56: The following error occurred while executing this line:
E:\source\java\FOD_11\Infrastructure\DBSchema\build.xml:28: C:\oracle\Middleware\utils\quickstart\wlserver_10.3\server\lib not found.
No where could I find the path C:\oracle\Middleware\utils\quickstart set in any of the scripts. If I hard coded the path in the fileset below
<path id="oracle.jdbc.path">
<fileset dir="${jdeveloper.home}/../wlserver_10.3/server/lib">
<include name="ojdbc6.jar"/>
</fileset>
</path>
I would just get another error further in the process when the jdeveloper.home was expanded again.
When I change the "\" to "/" in the jdeveloper.home (<fileset dir="${jdeveloper.home}/../wlserver_10.3/server/lib">) the build completed successfully.

Scheduler demo application

I tried the following demo application.
http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-scheduler-jms/doc/readme.html
I got the message "OC4JScheduler: DEMO COMPLETE" on the webpage. However, There is following error message in the log file. Any idea?
Error adding scheduler job
oracle.ias.scheduler.core.jobstore.JobStoreProviderException: initialization
failed
Awaiting receipt of job's messages....
oracle.ias.scheduler.core.jobstore.JobStoreProviderException: initialization
failed
Caused by: javax.jms.JMSException:
send(QueueSender[Oc4jJMS.Producer.aries.caprion.com.11543db5:10b805d03ef:-8000
.157,Queue[jms/SCHEDULER_DEMO_jobstore]],Queue[jms/SCHEDULER_DEMO_jobstore],Obje
ctMessage[ID:Oc4jJMS.Message.aries.caprion.com.11543db5
:10b805d03ef:-8000.158])
at
com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1034)
com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1114)
at
com.evermind.server.jms.EvermindSession.send(EvermindSession.java:1067)
at
com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.jav
a:373)
at
com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.jav
a:204)
at
oracle.j2ee.ra.jms.generic.CommonProducerWrapper.send(CommonProducerWrapper.java

I am having the same problem however I am not using IIS. I am using tomcat. This problem is only happening at one of our customer sites and is fine everywhere else.
I'm wondering where this requestor is coming from and if it may have to do with proxies or something else.
Is anyone else seeing this problem and have any ideas on this?
My requester is
User Authentication:
Server is requesting authentication for
Username:
Password:
It almost looks like the Server is requesting authentication for is missing a servername.
Christy

Vision Demo Application Jinit Error

Hi,
I am running Apps 11.5.8 on Redhat 7.3 (Ker. 2.4.20-28.7).
The installation is fine and database and processes are running OK.
When trying to access the Vision DB application selections after logging in,I get the following error.
Workflow / Workflow Admin WEb Apps - No problems, can access the demo apps
System Administrator /CRM ADmin-Vison Apps
I get an error asking me to install Jinitiator ( oajinit.exe ) and reopen the browser, which still does not solve the problem.
Any help would be appreciated.

Lucian,
Open form hsd21\hst\demo\hsd0000f.fmb in Forms 6.0. Look at the
list of attached libraries. The library hsdapp10 should be
attached, and specifically it should be attached before qmsevh50.
If you find the library there and in the correct position, you
should open hsd21\hst\demo\hsdapp10.pll and see if the procedure
qms$init_application is not compiled or is missing. If not
compiled, re-compile and save the library. If missing, restore
hsdapp10.pll from patch 10.
Regards,
Lauri
Lucian Calciu (guest) wrote:
: After the proper installation of the Headstart 2.1.2 and the
: Patch 10 against Designer & Developer 6.0 I tried to start the
: Demo Application and I receive the following message :
: tProcedure QMS$INIT_APPLICATION is missing in your application
: library, or the application library is not attached before
: library qmsevh50v . Why ?
: Thank you
null

Summit demo application- Where is it?

All,
I want to install summit demo application of forms, I need schema and fmb for forms 10g R2. I have searched through various links but i dont know where is this located right now. All previous posts on this points to locations http://www.oracle.com/technology/products
/forms/files/summit.zip but this location has all 11g information and I am unable to find this Zip. If you know the location of this ZIP or have this zip please let me know. I need this to see how successfully I can convert a forms apps to APEX.
Thank you

Hi Vishal, I might at at ODTUG this coming year and I am of course at many other events.
The bottom line, as pointed out in that paper above, is that you are not being forced to migrate. Secondly, ANY sort of migration is a big effort and there is no magic bullet. Anyone that tells you there is doesn't understand the problem ;o)
I can see APEX being an easy option to pick up for Forms users - it is PL/SQL and its in the database you already have. The question you have to ask is whether that choice will see you through the next X years. As you know, Oracle strategic direction for their Fusion application is JDev/ADF - so there is the question of whether you are comfortable in NOT choosing the tech stack that Oracles is betting its future business application on.
REgards
Grant

WD demo application: "Service not available" although service active

Hi everyone
I am new in Web Dynpro and while doing some tutorials I came across WD application DEMO_CONTEXT_PROP (package SWDP_DEMO). I wanted to test it, but I get error page "Service not available" and error code 403 "Forbidden". And if I test the service directly in SICF, I get error message SHTTP009.
The service itself is active in SICF, as well as the mentioned services in SAP note 1088717. And I can run other WD demo applications (such as DEMO_TABLE) without problems. Only this one is giving me problems.
The funny thing is that in SICF there are 2 services called DEMO_CONTEXT_PROP! One is greyed out, the other one is active. But even if I right-click on the one that is greyed out, is still says "active"!?
Any suggestions? Thanks!

Hello Jan,
we had this issue some weaks ago. When upgrading a system to EhP3 SAP delivered a new WebDynpro ICF service which had already been delivered earlier in a support package.
Problem is that the name of the SICF service is not its key. The real key for the service is a generated GUID which is stored in the database. If you create a service and later SAP delivers it or if SAP developed in 2 different release stacks the service may appear dublicated as you have 2 different GUIDs for the service. If the service is there twice the system tries one by chance if you are unlucky it takes the inactive one and you get the 403 error.
Thanls to Ramp Up status we discussed this directly with development. Unfortunately there is no real cleanup / consolidation function yet. The straight forward solution was renaming one of the services. As you only use a Demo Web Dynpro ICF service any of them will work. Perhaps you have to activate the one which is not renamed (you cannot really choose which you rename as the SICF tree is totally confused by the 2 services).
If you have this trouble for a production service you need the SAP to tell you which service (which GUID) is the long term supported and rename the other (perhaps you have to rename, rename the other and then rename the first back). If you do not do this you get the same problem with every Support Package which touches the ICF Services again.
Best Regards
Roman Weise

Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name:                          APPCRASH
Application Name:                             iTunes.exe
Application Version:                           10.3.1.55
Application Timestamp:                    4deec351
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17514
Fault Module Timestamp:                 4ce7ba58
Exception Code:                                  c0000005
Exception Offset:                                0002e3fb
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?

I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button.

Problem running a sample application in sun app server PE 8

Hi,
I am trying to run the petstore application with oracle 9i. It's a demo application that comes with app server. I set the classpath in the app server to the oracle driver files. I am able to deploy it successfully. But, when I run it it gives me this error:
java.sql.SQLException: Error in allocating a connection. Cause: Class name is wrong or classpath is not set for : oracle.jdbc.xa.client.OracleXADataSource
I am using oracle thin driver.
Rgds,
shipf1

Yes, I am deploying the application as an ear.You would need to configure the JAR as a module within the EAR. If it is required only by a web app, you could add it to the WEB-INF/lib for the web app.

Sample source code for demo application

Can you please kindly provide me source code of the demo application, i need both oracle form which is converted in to adf and also converted adf code it using Forms2adf, it will be a great help to making a decison for oracle form migration
Thank you

Hi,
I think this thread accurately lists the available options for evaluation of the forms 2 adf migration.
How can i test forms2adf generator?
Regards,
Ruud

Oracle Fusion Order Demo Application For JDeveloper error

HI,
i try to run the (Oracle Fusion Order Demo Application For JDeveloper) Fusion Order Demo (FOD) is an end-to-end application sample :
when i try to : Right click build.xml and choose Run Ant Target > buildAll . error coming
Buildfile: C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\Ant\build.xml
init:
[javac] Compiling 1 source file to C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\DBSchema\build.xml:100: The following error occurred while executing this line:
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\DBSchema\build.xml:63: The following error occurred while executing this line:
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\DBSchema\build.xml:28: C:\Oracle\Middleware\jdeveloper\wlserver_10.3\server\lib not found.
Total time: 6 seconds
how i can run the build.xml

Hi,
not quite sure the question is clear. The add cart command is a link defined in the JSPX file
<af:commandLink partialSubmit="true"
actionListener="#{shoppingCartBean.addItemToCart}"
id="cl3">
that points to
public void addItemToCart(ActionEvent evt) {
Map attributes = evt.getComponent().getAttributes();
invokeUpdateOp(new Integer(attributes.get( PRODUCT_ID_COL )+ ""));
in StoreFrontModule\StorefrontUI\src\oracle\fodemo\storefront\cart\view\managed\ShoppingCartBean.java . This is where you follow up then.
+"how i can make Repetition for the items in home.jspx"+
I can only assume you mean how to create the catalog items. Here I suggest you look at the demo source as this is what the demo is for. If you are new to ADF, I recommend that you first run a tutorial from here
If you are on 11g R1: http://www.oracle.com/technetwork/developer-tools/jdev/overview/index-100269.html
If you are on 11g R2: http://docs.oracle.com/cd/E18941_01/tutorials/toc.htm
No demo can replace proper learning, to be honest
Frank

Libqtawt.so problem in runing demo application of Personal Profile

Similar Messages

Maybe you are looking for