Libraries vs system files
I am a new mac user just switching over from years of windows. I have a question with regard to the "Library" system that is used by Iphoto and Itunes on the mac. With windows if I wanted to see an individual file, I would use explorer and find the file in an individual folder. When I use the "Finder" on the mac to look through my photos, for example, I still see all of my old windows style files that I imported from my old computer, however I also see a single icon titled Iphoto library. This file is roughly equal to the size of all of the system files combined. My question is do I have duplicates saved on the mac? Do I need the windows style files on the mac at all or is everything managed through iphoto. Can I delete everything but the Iphoto library icon? Same questions as to the Itunes library. Any help would be appreicated.
Peruse the iPhoto and iTunes help files for info on how those work. Since you're new, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.
Similar Messages
-
Why is Itunes cluttering my music folder with system files?
Ok i was using windows 7 before this and it was fine. Then i reformatted my drive and put windows 7 again. Downloaded latest itunes v9 and installed. Copied my entire music library backed up on my external hd and copied it to the music folder under the libraries section. In windows 7 the "my music" folder under user>documents and settings is actually the same as the "music" folder in the libraries on your pc. The music folder in libraries simply can compose of multiple folder so it simply displays all the contents of the "my music" folder and can also include other folders.
Anyhow itunes screw up indexing my library but thats a whole problem of another sort. The main issue is that after it sees my music library and after I have downloaded something it does this. http://img169.imageshack.us/i/65030372.jpg/
In that link as you can see in music under libraries it just leaves all those system and downloaded files.There actually ends up being hundreds after it gets album/song artwork since each artwork picture comes up as a ict2 file.
However if i go to the my music folder in documents and settings it neatly tucks away all those files into their respective folder in itunes media or artworkd, despite the few core library files. http://img223.imageshack.us/img223/5956/55950795.jpg
AT the moment i have deleted all the music in my library. Deleting those system files simply makes itunes no longer see an library. I have tried reinstalling with no avail. Why is it putting everything in folder in my music but not doing the same in music-libraries which is the same identical folder.This is just a thought, because I've not played with Windows 7, but near the top of your 1st image it says *Music Library, Includes 2 Locations*. I think you're looking at a view there which will display the contents of all possible music storage locations and the contents all of their subfolders, i.e. like a search result box. The other image corrsponds to a regular folder layout. iTunes stores an Album Artwork folder inside the main iTunes folder along with it's main database and a number of other supporting files. These files are required for iTunes to work so you can't just delete them. If you want to look at your media folders the use Windows Explorer to look inside *iTunes\iTunes Media*.
tt2 -
Time Machine not backing up system files on second hard drive
The system files are not being included in my time machine backups on my primary drive (an internal SSD) but they are for my secondary drive (an internal HDD). I want to revert the system back to a previous state because of a change I made to the Audio folder in Libraries that may have cause an issue. When I look at the backup on my backup disk, the folder isn't even included on the SSD (the drive I made changes to). Is it hidden or just left out? I checked the Time Machine preferences and there are no folders listed to be excluded.
1) Does this mean that I will not be able to do a full system restore from these Time Machine backups?
2) How can I include those files in future backups?
Thanks!
System information:
MacBook Pro Mid 2012
OS X 10.8.5 (12F45)
2.6 GHz Intel Core i7
8 GB 1600 MHz DDR3
240 GB OWC Mercury Extreme Pro 6G SSD (Main Bay)
750 GB Apple HDD (Optical Bay)I apologize, the title of this thread is misleading. I meant it to say "on primary hard drive", not "second hard drive". Sorry for any confusion.
-
I was looking at youtube.com, which always tells me my browser is not supported and recommends I download Firefox, but that is what I was using, so I went to Firefox to check for updates. (I think I also had freecycle.org open.) Then this message popped up in a new page: Mozilla security found (something like "too much", forget exact word) activity on your computer so it will do a fast scan of system file. There was an OK button. The page address was: http://update17.stegner.ce.ms/index.php?Q7Lhl9ShbRxGJXpkM1VLSi4ZE8H4pTedoVPySgeppM3VpC+thEspcFG7qxHgn1pdsC2h5ygPGWI3t5hXqMzL9EQaZZ3J1e3CKXgCb0Qp. I did not click OK but copied the link and closed the window which closed the internet. I have never seen this before and would like to know if it is really Mozilla or possibly something malicious. Thank you.
Good catch. That almost certainly is an invitation to download malware.
There are a lot of infected web sites pushing "fake antivirus" software. If you have any doubts about whether your system might have become infected, you can supplement your regular security software with these two highly regarded scanners:
Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
SUPERAntiSpyware : http://www.superantispyware.com/ -
How can I repair Vista system files with only a Toshiba recovery disc??
I have pretty much come to the conclusion that the reason I can't install Vista service pack 2 is due to some corrupt vista files. I ran the program that checks that system files and it said some are corrupt. There are some things I can't do, like turn on the Windows firewall even from that special adminostrar screen, or if I schedule a check disc scan, when I reschedule it for start up, it doesn't do it at startup. I had a Red Screen about a year ago, and it did a bunch of stuff and at the end, it said you had a major event and contact your administartor. Well, I am the administartor, lol. Anyway, it worked fine and I attribute these problems to that event.
Vista discs come with a repair option. All I have is the Toshiba disc that lets you reinstall the Toshiba and Vendor applications OR reformat the hard drive. I am not going to spend days trying to get my system back to where it is by tracking down everything I have installed especially when its working. Is there a work around? I will buy a Vista Home Premium disc if I have to before refortmatting. I have an x205-S9349 with Vista Home Premium. THANKS!Satellite X205-S9349
I ran the program that checks that system files and it said some are corrupt.
Sounds like System File Checker.
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows...
To follow up...
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program ge...
can't install Vista service pack 2
Maybe this helps.
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
Notice that you can get free support from Microsoft.
Free Unlimited Support Vista Service Pack 2 sp2
-Jerry -
Error phase Install Common system files SAP NW 7.1
Hello
I have a problem in my installation of SAP NW 7.1 for PI
I was installating the SAP NW but I stopped it and deleled this system (SID=TPI), then I started again the installation (SID=PI1) but in the phase Install Common System Files i got this message:
sapint_dev.log
CJSlibModule::writeInfo_impl()
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
CJSlibModule::writeInfo_impl()
File system node D:/usr/sap exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
CJSlibModule::writeInfo_impl()
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921 [ianxbservi.hpp:244]
CServiceHandle::Open(ClusSvc)
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR 2010-07-09 17:30:14.234 [sixxcstepexecute.cpp:984]
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING 2010-07-09 17:30:14.437 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2010-07-09 17:30:14.437 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO 2010-07-09 17:30:45.921 [sixxcstepexecute.cpp:1072]
An error occured and the user decided to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories".
INFO 2010-07-09 17:30:48.640 [synxccuren.cpp:1016]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS.
LOG sapint.log
INFO 2010-07-09 17:30:13.296
Execute step createFirstSystemDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0
INFO 2010-07-09 17:30:13.750
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
File system node D:/usr/sap exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR 2010-07-09 17:30:14.234
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING 2010-07-09 17:30:14.437
Could not get property IDs of the JavaScript object.
ERROR 2010-07-09 17:30:14.437
FJS-00010 Could not get value for property
I had found information about saploc however still I got the same
The installation is on Windows 2003 + Sql 2005
Any suggestion for this problem
Thanks
DannyHello
I deleted the system with the wizard on sapinst
NetWeaver Process Integration 7.1 Software Life-Cycle Options Uninstall Uninstall ‒ SAP systems or
single instances .
Danny
Edited by: Danny Sanchez on Jul 12, 2010 4:17 PM -
Remote not working - system files...?
hi, sorry for the longish post, gonna detail what i've been doing and the other problems i've dealt with, for background. think the only problem left now tho is with the remote.
i coincidentally used my apple remote for the first time yesterday, and it was working fine, with front row and mediacentre.
then later on yesterday, i managed to screw up a lot of my system files using a program called 'monolingual' (it removed the ppc code from the files, leaving only the intel, end result being that rosetta stopped working). ended up reinstalling osx (10.4.6) from the discs that came with the macbook. from what i'd read, i'd been expecting to do an archive & install, but that wasn't offered, it just did an 'upgrade' (tho it was the same version) install of osx over the top.
this fixed rosetta, and other than having to reinstall a couple of programs everything seems to be working normally, except that the remote isn't working at all. the macbook doesn't respond to it at all, the button combination to pair the remote to the mb has no effect, and there aren't even any options in the security preferences relating to the remote.
any ideas how to fix this? any idea which system files are relevant to the remote, that might need refreshing? other suggestions?
thanks,
dave
Macbook Mac OS X (10.4.6)yep it showed up in the hardware test.. then actually when osx booted back up, it complained about my logitech mouse driver not being installed properly, so i reinstalled that... then rebooted and it complained about some other extension mouse driver, so i reinstalled that... and when it rebooted again, the remote works again!
guess the dodgy drivers were fouling up the usb stuff (yep today i learned that the ir receiver, and the isight, run on usb. today i also restarted my macbook more times than i have in the last few weeks since i got it).
thanks for your help anyway -
Hello
I recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time ..this has occurred several times on this sytem and and as well as other system this one has window vista 64 bit home prem. why is the itunes not working to burn my disks
it worked fine before the updates to the system and the itunes software is up dated as well...can someone suggest something
thanks for your time in this matter
sadeyesjleeI recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
The 2131 usually indicates firmware needs to be updated on a drive.
Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131? -
Hello
I was having some problems with my Imac, for a while it was slow and often disconneceted from my wifi, while this one worked perfectly (tested with other devices)
I thoug i might have a virus, so i downloaded an antivirus (mac keeper) and started checking.
I also did a scan of my computer using Console or something from the utilities, and then a folder popped witha file I had canceled a while ago. I canceled the file and then my Imac continued to be slow.
i then restarted my Imac, but when it started, the usual grey logo of Apple appeared, and then it shut down suddently.
I tried to reboot it holding the command key and R but nothing, and then i tried holding the shift key and a bar appeared, and at half of the bar it sut itself down again.
I think it is probably a preoblem because I may have cancelled some of the system files from a folder called "private" in the "documents" folder.
Is there any way I can recover some of my files? maybe all of them? I hope so because I have some important files there
Is this a thing I can do myself or do Ineed to go to a MacStore to repair it? Will I need to change HD or just to format it and reinstall? also if there is any way i can recover some of my files that would be great.
Thanks
Ludo
P.S. problems appeared when i installed the Mavericks version.If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
Managing multiple libraries with different file types (AAC v. Lossless)
I have set up two libraries, one for my AAC music and the other for my lossless music. The files themselves are located in two separate places on my hard drive. When I switch libraries (option-clicking iTunes), and go to Preferences/Advanced tab, the directory for the files and the import method doesn't change -- I have to change it manually. This is annoying.
Does anyone know of a way to automate this change, so that if I open a new library, the default location of the files and the import format changes automatically? I tried ituneslibrarymanager from Dougscripts, but for some reason can't get this program to install on my machine.No, it's the same Windows XP user account, but I have two separate music libraries - the music files in library are in a lossless format, while those in the other are in AAC. For convenience, I wish to keep the two libraries separate.
In iTunes 7 it is possible to have separate libraries - start iTunes and hold down the SHIFT key (Windows) while the program starts. A dialogue box then appears where the required library can be selected. However, as far as I can tell, it's not possible to have a different set of preferences for each library.
Say the preferences are set up for my lossless library, which is located on a separate network drive. If I then make the AAC library active and open iTunes, iTunes reindexes the library according to the settings for the lossless library and I end up with the AAC library full of lossless files. I've tried unchecking various things in the preferences box, but I've had no luck fixing the problem. Thanks for your suggestion - I have already reported the problem.
The whole thing is a rather inelegant way of managing multiple libraries in iTunes. Surely the Apple developers can come up with a way of doing it from within iTunes?? -
How do I install a new system file to replace the damaged one
I am tring to repair the permissions on my computer and am getting all of these types of errors. Computer is dragging. I reinstalled my operating system and this is what is happening. Any suggestions. Happening on my desk top I Mac and on my Mac Book. I did google search and Error 23 is "These errors indicate that the Mac tried to access one of the standard routines in the system file and couldn't find it. In all probability, that means you have a corrupted system file. Try installing a new system file to replace the damaged one."
Here is a sample of what disk utilities says
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/cdesc-Con versions.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_format ted_s-i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_param- i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_query- i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_senten ce-i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_xml-i. yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/ExtractOptions
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/ExtractOptions/cdesc- ExtractOptions.yaml"
It says it should be done in 6 minutes and I am going on hours!
Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib"."
Any suggestions?I would apply or reapply the 10.6.8. Combo Update from Safe Boot (hold Shift down at startup -- give it much more time to boot than usual and leave it in SB for a few minutes before doing anything.)
http://support.apple.com/kb/dl1399
The messages you are seeing beginning with "Permissions differ on...." can be ignored. -
Disk free listing no longer work after rsync overwritten system files /etc
Hi All,
I am having difficulty running some key critical commands on this Solaris 10 server (Sun Fire X2200, M2 x64 Server) called SERVERB. This SERVERB is a disaster recovery system identical to our production server known as SERVERA. We recently scheduled an regular rsync cron job to copy everything from SERVERA to SERVERB, but feared that this process has also overwritten some of our system files in /etc which prevented these commands from working.
Below is the output when attempting to run these commands:
$ hostname
SERVERB
$ id
uid=12345(jack) gid=6789(staff)
$ df -k
$ df /home
df: Could not find mount point for /home
$ pwd
/tmp
$ df -k .
df: Could not find mount point for .
$ which df
/usr/bin/df
$ top
top: cannot find/execute "top" in ISA subdirectories
$ which top
/usr/local/bin/top I have re-installed 'top' but it did not make much difference.
We have also splitted up physical SERVERB into multiple regions using Solaris Zoning, but not sure whether we have correctly partitioned/sized the filesystems correctly amongst each zones.
Any advice would be appreciated.
Thanks,
JackHi rogerfujii,
Thank you very much for responding to my call for advice.
Does /etc/mnttab gets regenerated during reboot, or do we need to restore the orginal file (going to be difficult) prior to rebooting? I thought that this file is dynamically build (from /etc/vfstab) during startup but need your confirmation.
Below is listing of "zfs list" which may shed some light on what the filesystems were configured to:
$ zfs list
NAME USED AVAIL REFER MOUNTPOINT
dr-zpool 133G 51.5G 18K /dr-zpool
dr-zpool-old 129G 55.2G 18K /dr-zpool-old
dr-zpool-old/dr-db 121G 29.2G 121G /old/prod/db
dr-zpool-old/dr-inst 6.34G 23.7G 6.34G /old/prod/inst
dr-zpool-old/dr-lg 1.74G 2.26G 1.74G /old/prod/lg
dr-zpool-old/dr-pl 1.04M 4.00G 1.04M /old/prod/pl
dr-zpool-old/logs 18K 55.2G 18K /old/dr/logs
dr-zpool/dr-db 118G 31.8G 118G /prod/db
dr-zpool/dr-inst 9.21G 20.8G 9.21G /prod/inst
dr-zpool/dr-lg 2.86G 1.14G 2.86G /prod/lg
dr-zpool/dr-logs 1.90G 51.5G 1.90G /prod/logs
dr-zpool/dr-pl 377M 3.63G 377M /prod/pl
The following is the content of /etc/vfstab which I suspect may have also been clobberred:
$ more vfstab
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/md/dsk/d20 - - swap - no -
/dev/md/dsk/d10 /dev/md/rdsk/d10 / ufs 1 no logging
/dev/md/dsk/d30 /dev/md/rdsk/d30 /var ufs 1 no logging
/devices - /devices devfs - no -
ctfs - /system/contract ctfs - no -
objfs - /system/object objfs - no -
swap - /tmp tmpfs - yes -
#dr-UFS-tuned
/dev/dsk/c4t600A0B800029FC220000073D49C29FD9d0s6 /dev/rdsk/c4t600A0B800029FC2200
00073D49C29FD9d0s6 /apps ufs 2 yes logging
#dr-UFS-tuned
/dev/dsk/c4t600A0B800029FC220000073D49C29FD9d0s5 /dev/rdsk/c4t600A0B800029FC2200
00073D49C29FD9d0s5 /prod/3g ufs 2 yes logging
#dr-UFS
/dev/dsk/c4t600A0B800029FC220000067E48345A45d0s6 /dev/rdsk/c4t600A0B800029FC2200
00067E48345A45d0s6 /backup ufs 2 yes logging
#dev-regions
/dev/dsk/c4t600A0B800029FC2200000681483462BFd0s6 /dev/rdsk/c4t600A0B800029FC2200
000681483462BFd0s6 /regions ufs 2 yes logging
sharefs - /etc/dfs/sharetab sharefs - no -
Output of "truss -f -o /tmp/df.out /usr/local/bin/df":
13858: execve("/usr/sbin/df", 0xFFBFE964, 0xFFBFE970) argc = 2
13858: resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
13858: resolvepath("/usr/sbin/df", "/usr/sbin/df", 1023) = 12
13858: stat("/usr/sbin/df", 0xFFBFE740) = 0
13858: open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT
13858: stat("/product/lib/libcmd.so.1", 0xFFBFE1F8) Err#2 ENOENT
13858: stat("/usr/local/lib/libcmd.so.1", 0xFFBFE1F8) Err#2 ENOENT
13858: stat("/usr/local/lib/libcmd.so.1", 0xFFBFE1F8) Err#2 ENOENT
13858: stat("/usr/lib/libcmd.so.1", 0xFFBFE1F8) = 0
13858: resolvepath("/usr/lib/libcmd.so.1", "/lib/libcmd.so.1", 1023) = 16
13858: open("/usr/lib/libcmd.so.1", O_RDONLY) = 3
13858: mmap(0x00010000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
13858: mmap(0x00010000, 90112, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF380000
13858: mmap(0xFF380000, 9948, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF380000
13858: mmap(0xFF394000, 1027, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 16384) = 0xFF394000
13858: munmap(0xFF384000, 65536) = 0
13858: memcntl(0xFF380000, 3336, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
13858: close(3) = 0
13858: stat("/product/lib/libc.so.1", 0xFFBFE1F8) Err#2 ENOENT
13858: stat("/usr/local/lib/libc.so.1", 0xFFBFE1F8) Err#2 ENOENT
13858: stat("/usr/local/lib/libc.so.1", 0xFFBFE1F8) Err#2 ENOENT
13858: stat("/usr/lib/libc.so.1", 0xFFBFE1F8) = 0
13858: resolvepath("/usr/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
13858: open("/usr/lib/libc.so.1", O_RDONLY) = 3
13858: mmap(0xFF3A0000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
13858: mmap(0x00010000, 1351680, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF200000
13858: mmap(0xFF200000, 1229381, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF200000
13858: mmap(0xFF33E000, 35801, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 1236992) = 0xFF33E000
13858: mmap(0xFF348000, 1576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF348000
13858: munmap(0xFF32E000, 65536) = 0
13858: mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF3F0000
13858: memcntl(0xFF200000, 144964, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
13858: close(3) = 0
13858: stat("/product/lib/libc.so.1", 0xFFBFE1F8) Err#2 ENOENT
13858: stat("/usr/local/lib/libc.so.1", 0xFFBFE1F8) Err#2 ENOENT
13858: stat("/usr/local/lib/libc.so.1", 0xFFBFE1F8) Err#2 ENOENT
13858: mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF370000
13858: munmap(0xFF3A0000, 32768) = 0
13858: getcontext(0xFFBFE430)
13858: getrlimit(RLIMIT_STACK, 0xFFBFE410) = 0
13858: getpid() = 13858 [13857]
13858: setustack(0xFF372A88)
13858: brk(0x000290D0) = 0
13858: brk(0x0002B0D0) = 0
13858: stat("/platform/SUNW,SPARC-Enterprise-T5220/lib/libc_psr.so.1", 0xFFBFE0F0) = 0
13858: resolvepath("/platform/SUNW,SPARC-Enterprise-T5220/lib/libc_psr.so.1", "/platform/sun4v/lib/libc_psr.so.1", 1023) = 33
13858: open("/platform/SUNW,SPARC-Enterprise-T5220/lib/libc_psr.so.1", O_RDONLY) = 3
13858: mmap(0x00010000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
13858: munmap(0xFF3A2000, 24576) = 0
13858: close(3) = 0
13858: ioctl(1, TCGETA, 0xFFBFE88C) = 0
13858: open("/etc/mnttab", O_RDONLY) = 3
13858: llseek(3, 0, SEEK_CUR) = 0
13858: llseek(3, 0, SEEK_SET) = 0
13858: ioctl(3, (('m'<<8)|7), 0xFFBFE6EC) Err#25 ENOTTY
13858: llseek(3, 0, SEEK_CUR) = 0
13858: close(3) = 0
13858: zone_lookup("") = 0
13858: zone_lookup("") = 0
13858: zone_list(0x00000000, 0xFFBFE76C) = 0
13858: zone_list(0x0002A188, 0xFFBFE76C) = 0
13858: brk(0x0002B0D0) = 0
13858: brk(0x0002D0D0) = 0
13858: zone_getattr(9, ZONE_ATTR_ROOT, 0x0002A57C, 1024) = 26
13858: _exit(0)Looks like I will need some training in this area.
Any suggestion would be very much appreciated.
Thanks again,
Jack -
Issue with common system files for Sneak Preview SAP NetWeaver 2004
Hello,
I am trying to install Sneak Preview SAP NetWeaver 2004 and 7.0 - Full Java Edition with SAP NetWeaver Portal onto my machine.
On the third step of installation-- install common system files-- I am getting the some error messages and the installation was stopped. Can anyone kindly provide some assistance?
THANK YOU in advanced.
Errors:
INFO[E] 2007-09-10 00:18:17 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:18:18 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:18:18 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:23 [iaxxgenimp.cpp:779]
showDialog()
An error occured and the user decided to rety the current step: "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
INFO 2007-09-10 00:24:23
CJSlibModule::writeInfo_impl()
Setting ACL of registry entries for SAP system J2E...
INFO[E] 2007-09-10 00:24:32 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:24:32 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:24:32 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:46 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
Exit status of child: 1I am not sure if this helps, but SAP_J2E_LocalAdmin exists in my system as a group not user.
-
Won't boot from install discs after deleting some system files
I've been looking through the forum and haven't found an answer to my problem - maybe someone can help me out.
I have an aluminum Powerbook G4, 1.67, 1.5 RAM, 10.4.11. I was experiencing the problem with FCE capturing video for about 5 minutes and then freezing, and I read some threads here about how this can be fixed by returning to Quicktime 7.2 and installing it with Pacifist. I did this, but first tried to delete my previous Quicktime version files, and obviously I deleted some system files in the process. That's how my new problem started.
Programs now that do not open - Preview, iTunes, iMovie, FCE, Yahoo, Mail, and Microsoft Messenger. I no longer have my date/time/battery level/airport/bluetooth indicators in my toolbar. The Spotlight icon flashes, but will not open. Also, when opening the System Preferences pane, it opens just for a second or two and then crashes and closes. Safari, airport, and Word all work, though, and I still can access internet.
I tried to re-install OS 10.4 from my black install disc. The computer reads the disc, but after I click the installer icon and then "restart," the computer fails to completely reboot. The disc spins in the drive, I get the Apple, the indicator, and then the screen goes to blue and the disc soon stops spinning. Nothing happens after that. I've tried rebooting by holding down the C key but the same happens. When I hold down the option key, I get to the point where I can choose to boot from the install disc, and then the same thing happens - the blue screen and nothing more. Booting with the shift key held down doesn't work either.
I did just have a repair by Apple - my adaptor plug sparked when inserting it into the outlet, and I had to have the logic board replaced. But the computer seemed to be working fine when I got it back, except for the FCE issue first mentioned. Looks like my good intentions have done me in.
The install disc is about three years old, and is in good condition. It's been in the garage, so could heat or cold affect the readability of the disc?
Does anyone have any suggestions on how I can boot from my install disc and get a fresh install of my OS?Hi bboross,
Tough without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(space between fsck and -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED *** Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more. -
I have a macbook pro, and a few months ago I had to find some hidden system files. I asked a discussion question, and someone helped me to display all the hidden folders. However, now I can't figure out a way to hide these files again (I no longer need to see them). How do I do this? It's not just one file, but a whole bunch of files.
Open the Script Editor or AppleScript Editor in one of the subfolders of Applications and run the following:
tell application "Finder" to quit
if (do shell script "defaults read com.apple.finder AppleShowAllFiles") is "1" then
do shell script "defaults write com.apple.finder AppleShowAllFiles 0"
else
do shell script "defaults write com.apple.finder AppleShowAllFiles 1"
end if
delay 2
tell application "Finder" to run
If you change your mind later, run the script again.
(64381)
Maybe you are looking for
-
Hello: I have a hosting reseller website at http://www.canyonsprings.ca that works great in chrome, explorer, but display a error on the front page, when I use firefox. This error was corrected by the developers of the template. Why does firefox keep
-
IPod Nano 7th gen not turning on but recognized by iTunes and Windows
My two-month old 7th gen iPod Nano is not turning on. I've reset and restored it using both Windows (My Computer) and iTunes and have downloaded the and installed the latest version of iTunes. It was working fine and now just will not turn on. It is
-
Does HP Color Laserjet 2840 work with Lion?
I am considering upgrading from Snow Leopard to Lion. Will my HP Color Laserjet 2840 work after the upgrade?
-
Anamorphic Distress: PLEASE HELP!
I have pretty much tried everything at this point. There have been a lot of posts about this topic, and even after reading through the manual I still can't seem to get it right. Basically, I have two types of footage in a project that will be made in
-
Hello All, Two weeks back, I cleared 1Z0-043(in English) from Tokyo,Japan. Would Oracle send any certificate ? In certview, which email id should i provide ? 1) Email id registered at the pearsonvue ? 2) Oracle SSO ID, which itself is an email-id ? R