Library buttons greyed out. No loops available.
Hi,
Thought I finally should start learning Garageband. A couple of years ago, I bought a couple of jam packs. As I recall, I had them included in GB then. But in this version, the library buttons are greyed out and there's no loops included.
How do I import them?
I have GB '08 (version 4.1.2) and Mac OS 10.5.7
the library buttons are greyed out and there's no loops included.
http://www.bulletsandbones.com/GB/GBFAQ.html#missingloops
(Let the page FULLY load. The link to your answer is at the top of your screen)
How do I import them?
drop the folders onto the loop browser
Similar Messages
-
Submit Button Greyed Out (v 4.0.5)
I have been using Compressor successfully for about a year. Recently it updated to v4.0.5. Now I am not able to submit, with the final Submit button greyed out. I have checked my Destination folder permissions and all appear correct.
What could be the cause of this, and what shall I do? I need to render a program urgently for broadcast.
Thanks
GeoffI just resolved a similar problem. I am running OSX 10.6.8 on a MBP 13" 2010.
Once inside Compressor I'd click on "submit" and the drop down window would show "none" next to "Cluster:" and the submit button was greyed out.
I called Apple Care and they had me delete the preference file "com.apple.Compressor.plist" file from my user>library>preferences folder. This did not fix the problem on its own.
They then had me delete the Apple Qmaster folder from user>library>application support. This did not fix the problem on it's own.
I then reinstalled the Compressor application itself. This did not fix the problem on its own.
I then verified permissions and repaired permissions using disk utility. This did not fix the problem on it's own.
I then clicked on "Share Monitor" which is found on the Compressor task bar. "This Computer" was displayed in the left column. I simply clicked on it in order to high light it. I left the "Share Monitor" window open and went back to the submit panel and "This Computer" was now displayed next to "Cluster:" and the program is now working again.
YMMV. -
After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Put, Get , Connection buttons greyed out
Hi All,
I am pretty new to Dreamweaver but not to web development. I
have set up and connected a few sites from my own PC. It all goes
just like it says in the manuals.
But I got called into a client site who have an existing site
set up in Dreamweaver. The DW person left and the current person
wanted some coaching. Well the Code, Split, Design views all came
up and we could edit just fine.
But over on the right, above the list of files, all the
buttons (put, get, connection etc.) were greyed out. At first I
assumed the FTP connection was not set up, but it was, because when
we saved files, they saved straight to the live site.
So I went over to look at Site / Manage Sites. The FTP
connection was listed, but many of the other options (all the
categories within Advanced) did not seem to be available. They were
not just grayed out - I could not even see the list of them.
I have been fiddling around at home on my own sites, trying
to figure out how to recreate this and I can't. I can figure out
how to put myself onto live updating (update to remote FTP on Save)
but I don't get the other buttons greyed out just because I am
working like this.
Any ideas? I'd like to be able to go back there, take them
off live updates and restore the buttons.
Thanks
AbigailUnless one is working in ColdFusion, or has special
requirements, the FTP &
RDS server option should never be used.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C4F834C6.30E30D%[email protected]..
>A guess- they set this up as an "RDS" ftp site, and it is
editing the live
> files on the server.
>
> To make a regular ftp site connection, make a New site.
> If it's CS3 version, make sure you pick "site" and not
"RDS"
> Enter all the details, and make a "regular" ftp
connection, not an RDS
> connection.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
> -
Agent email help - buttons greyed out at one location
The setup: Two call centers. One in NC and one in CA.
The one in NC, which is where the call center servers are, has no issues with email buttons becoming active.
The one in CA, every morning when the agents login the email buttons will not become active unless the users do the following workaround
Start agent.
Run and IE url that was given to me by Cisco. http://<ipaddress of ccx server/EemUi/index.jsp?port=59015
This will force Java to start and have the java icon appear in the system tray.
Email buttons become active
Close IE window (which make email buttons grey out again)
close and restart agent
Email buttons work.
I only have this issue in the CA office.
I had them ship a desktop to me in the NC office. I connected it and did NOT have an issue. Everything works perfectly here.
Is the issue tied to the distance? Is there some java time out setting I can tweek to make this work.
I didn't have this problem with 8.5 su 2.... it happened after the update to su 3
Anyone seen this? Cisco has no answer.I bounced this around the office to get some ideas. One question - how long is the CA office waiting for the email buttons to become active? That is, setting the workaround aside, if they wait long enough, do the Agent E-Mail buttons ever become active? The thinking is that could be a factor as the entire applet is around 40 MB. If connection speed isn't great it could take a while to download which would explain the scenario.
Tom -
Itunes showing all data as other and sync button greyed out
Itunes showing all data as other and sync button greyed out. I have downloaded and installed Itunes 11 (multiple times) and restored my phone twice already, but I am still not able to sync my Iphone 4 with Itunes.
When I select / de-select Apps on Itunes to remove from the phone the "Apply" button does appear, but after I click it nothing happens. Then the greyed out "sync" button just appears again.
Anyone with some advise please?Try Restarting or Resetting your touch.
Restart: Hold the Sleep/Wake button until the red slider appears and turn off your iPod. Press the sleep/wake button and hold it until you see the Apple icon.
Reset: Hold the Sleep/Wake button and the Home button at the same time. The red slider will appear first, keep hold everything until you see the Apple icon. Release the buttons.
Check your iPod and see if your music and apps have reappeared. If they do after either option, then resync your iPod.
If neither works, then Restore your touch through iTunes. -
Unable to insert photos from iPhoto into a Word document. File "iPhoto Library" is greyed out and won't let me choose it.
Choose it from where? See this user tip by Terence Devlin for how to access photos for use outside of iPhoto: How to Access Files in iPhoto
Have you tried dragging the photo from the iPHoto window into the open Word document window?
OT -
I created a second iphoto folder on a separate portable hard drive and moved my holiday snaps into it to give me more space on my mac hard drive, but when trying to get some photos for my screen saver the iphoto library is greyed out and I can't select it. Is there a way to select it or change it from being greyed out?
Select system preferences in the dock. Desktop and screensaver, choose folder, jenniferprice/pictures/iphoto library.
Don't choose Folder.
Instead, click on the + at the bottom and look for the Media heading on your left. Select iPhoto there. -
My wifi button greyed out...pls help
hi all users,,,my iPhine 4s wifi button greyed out suddenly
tried the temperature trick but problem persists
pls help anyone
thanksTry the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
My new filters tree flames and picture frame are greyed out and not available?
my new filters tree flames and picture frame are greyed out and not available. what do I need to do?
It's likely that your graphics card/GPU does not support the new feature. If you are using an older video card or an integrated graphics card that is not new like the Intel Iris or Iris pro than that is likely the reason.
-
Hi, i am using iphone4s.. 2 days ago i had a problem with wifi.. button greyed out, it was suggested to keep phone in freezer, worked temporarily and i updeted to ios7.1 but still facing same problem.. wht to do? cant afford to throw off :/ huhh..
well, you know how it is - glitches that usually resolve with a hard reset etc
then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!! -
Forward and back buttons greyed out, no forward or back available in right click menu either
After upgrading to the latest FF14 the forward and back buttons and menu versions of forward and back are greyed out.
Tried the sqllite check and it says all my databases are fine. Tried safe mode, same thing. Tried a new profile, same thing.
Any other suggestions?You could have backed up your profile folder. If you did, [[Recovering important data from an old profile]] can help :)
-
IPhone Mail app send button greyed out
I have a new iPhone 6 plus with a single IMAP mail account. I can receive mail and reply to mail that's been sent to me but when I start a new mail item the send button is greyed out.
My mail server settings are correct and I've tried reentering the SMTP details, resetting the network settings and restarting the phone. I've tried sending to different addresses and always include a subject and text in the body but the send option never becomes available.Open Mail Preferences/Accounts/Account information. In the box for the Outgoing Server, I suspect None is selected? Make a selection of the correct SMTP, and that should resolve.
Ernie -
Why is Submit Button Greyed Out on Compressor
Just recently, I have been unable to submit a video for compression. As always, I drag on the compression I want to use and select the destination. I hit the first submit buttn and the window drops down asking for the name of the batch. I enter the name but on this window the submit button is greyed out and I cannot submit the project for compression.
I looked at past instances of this problem and I downloaded and ran Compresser Repair 2.2, but the problem remains.
Any ideas would be greatly appreciated. I have never had this problem before.
Barry O'Brien
Compressor 3.5.3
FCP 7.0.3
OS 10.6.8Russ,
No worries. Yesterday, I brought the Apple Clean Install instructions to pointed out to me to my IT guy I had him do a clean intall of Compressor using the outline and the problem was solved. It took him an hour. It would have taken me 1/2 a day!
I did have one good bit of advice suggested by Jason Brown over at Creative Cow, but I didn't have time to research it - and my computer was already on my IT guy's bench. He said:
"Let me start by saying I'm not an expert...just a user, so I could be wrong. BUT I fixed my issue after installing fcpx, it moved compressor to a subfolder in applications, but not the Qmaster app. When I ran update, it updated Qmaster to 3.5.3 but compressor was just on 3.5 I took compressor out of that folder, ran update again and they were same version number. U can check version number by looking about under file menu. For Qmaster, select app, get info and its in there."
I think he is suggesting that Emaster and Compressor need simultanious updats, and to do that Apple has to be able to find the files. The fact that Apple has the clean install for Compressor so available and in multiple locations suggsts to me that this is a common problem.
One of the Creative Cow guys said that his production company does complete clean installs off all apps on all machines every 12 to 16 months!
Well, I declare this issue fixed, and thank you for all your help and advice. Hopefully, someone else will find this thread and it will be helpful to them.
Regards,
Barry -
Motion 5 Share/Export Buttons Greyed out
Hi, just got Motion 5 on it's own for a project we're doing in FCP7 and for some reason all the "next" or "share" buttons in the export menus are greyed out or disabled. We've messed with a lot of settings but to no avail.
Is there something I'm missing here? There's nothing written on the Motion product page about requiring Compressor or FCP-X to export and I haven't found anyone else online with this issue.So there's nothing I can do to get this fundamental part of the software working? It's pretty stupid if it can't save.
The only option I have to take this higher is to get Apple Care video and that's $800 for something that appears to be a bug in Motion validating an external framework. From a software design perspective, the only reason that I'd want to grey those buttons is if there were a setting in each dialog that you needed to set before you could export or you were only using a trial version and you wanted to stop people from exporting it or if the dependent framework (e.g. ProApps export manager) wasn't validated in the registry within motion.
If they throw anything else at me like you need FCPX or Compressor or Lion then that's not right either since they had no mention of that on their website when I purchased it.
This is just really frustrating!
Maybe you are looking for
-
Report runs fine in Analyzer but not working when executed fromQuerydesiger
Hi, I have a issue with the Bw report which is not showing any data for Keyfigureswhen i execute the report related to APO from Bex query designer in Web. But the same report executes fine in the Bex Analyzer. If any one has faced this issue earlier,
-
Unable to access PDF files after downloading 30-day free trial for ExportPDF
Hello, Please accept my apology if I have landed on a page that may or may not offer what I do hope, someone might be able to provide a successful solution which will enable me to access a program I downloaded earlier today, Export PDF, offered by Ad
-
TO MAKE BW REPORT ON DB SPACE MONITORING (DB02)
Hello,Gurus I am working on project where user wants DB Monitor (Transactin code-DB02)Data to be avilable on BW reports as he want to see consumption of DB size and he want it to be on BW report,I found so many Tables on DB02 ex psapods2/psapfact2 e
-
How to change list's column to user defined type in sharepoint2013?
In my SharePoint Site Collection has a one list, it contains some column of the following type text, date, multiline etc, so here i want to change the number field into range filed(like slider <input type="range" min="0" max="100"/> ) so i don't kno
-
How to duplicate the database/catalog ?
Hi, How can we quickly duplicate our database/catalog to create a test environment ? Thanks, Paul