Library develop report with report painter in Cost Center Accounting

Dear experts!
Now, I'm getting some issue about finding library for developing report with report painter.
Really, i don't know libraries that are used to develop report with report painter for Cost Center Accounting.
Can tell me about them?
Help me, please.
Best regards, Huy

Hello Huy,
CCA reports would be based on table CCSS, you can go to transaction GRR2 and check the various libraries listed there and find a suitable one. You can also use libary 1AB which contains the various cost center variance reports or you can use transaction GR21 to create your own library.
Kind Regards // Shaubhik

Similar Messages

Deactivate Cost center accounting in controlling area

Hi all,
Could you describe the consequences of the deactivation of CO-CCA in the controlling area?: should I expect incoherencies ?
The activation (deactivation) code setting is free in OKKP transaction. My first deactivation test show me it's possible to make new postings in FI (FB60) and the cost center is not necessary anymore.
In fact in my case I don't need to check FI-CO reconciliation.
Regards
Pascal Cuenin

Hello
Why this type of requirement is coming into our mind. SAP controlling has very good funtionalities for internal reporting. If you deactivate cost center accounting then how your management would see...cost center reporting, budgeting, controlling
for example you have cost element salary,,,,,with one gl for a company,,,how you will distinguish salary with reference to a division , dept, location....
how you will get your assessment, settlement, costing all these for which CO functionalities are developed
regards
dinabandhu

Open PO report with GL's and Cost Centers

Hi Gurus,
Is there a report that already exists where we can run open purchase
orders not received for non-inventory items that pulls the quantity,
price, GL account code, and cost center account code?
Thanks
Anusha

Hi,
May be the requirement will not be met in a single report.Please check the t code ME2K with selection parameter as we101 which gives you the open POs for that cost center or range of cost centers.
EKPO gives price details.
and check the table EKKN for GL account and cost center for that PO.
If you want open POs check the T code ME80FN.
Regards,

About cost center accounting (Transaction based posting with CO assignment

Hi,
I m working on cost center accounting ,and i m stuck in transaction based posting ,i m post transaction through FB50,
i m given concern G/L account Dr 8000 and credit to bank account with account assignment cost center 10100.after i simulate this transaction the system accepts and i m enable to see the transacion after simulation,but after that i m going for save it at this time system geting error ,and error is like ---
Not possible to derive owner from account assignment/bank details
Message no. REEXFI054
Diagnosis
In the condominium owner company code, the system attempts to determine a unique condominium owner for each document.
To make this determination, the system analyzes:
The profit centers in the document. Usually the system derives the profit centers from the account assignment objects in the individual line items. In the condominium owner company code, the system determines the profit center for real estate objects from the condominium management contract for the rental object.
The house bank data in the document. Therefore, the affected bank account has to be entered uniquely in each bank line item. You can enter the house bank and the account ID in FI posting transactions by choosing Additional Data. The system then searches for the condominium management contract that has these bank details.
In the current case, the system is not able to determine a unique owner.
System Response
The system cannot post the document.
Procedure
Check the account assignment data and bank details.
So plz guide me about this ,
Regards,
Pramod Kulkarni

Hello again,
First off all thank you both for your answers.
Dirk,
When I said enhancing I was not thinking of developing the hole thing. That seems to be a hugely complex task and I do not have the time for that in the project were I am presently working. What I meant was: Is there a SAP Enhancement available? A function exit? A Customer Include? Something that is half way done?
If this is not the case the solutions I thougth were:
i) Replicate my infocube's data into a ODS. Develop a report on the R/3 side that reads that data via a RFC and uses Batch Input (Call transaction) to update the data on the R/3 side;
ii) Develop a function module (similar to the standard one) on the BW side to use in a planning function of type exit which would update a Z database table on the R/3 side and, afterwards, develop a report (also on the R/3 side) which would read that database table and update transactional tables via Batch Input (or Call Transaction with a developed log transaction).
From the point of view of performance I believe the solution involving the ODS is better because we are talking about 300 000 materials.
As for your proposed solutions 1) and 2) althougth they seem very nice and elegant I would like to avoid changing the R/3 customizing. Regarding your proposed solution 3) I am going to take a look at the function group you mentioned and the respective note.
Once again thanks a lot for your answer. You have been very helpfull.
Best Regards,
Vasco

BPS Retraction for Cost Center Accounting - Cost Element - Compounding with

Hello everybody,
I'm using the "BPS Retraction for Cost Center Accounting" described in the blog from Praveen Mayalur. I have customized the BPS system (3.5) as described.
But if i started the retraction i receive a dump. I have debug a little bit and i found out that there is a problem with the InfoObject "Cost Element". It is compounding with two InfoObjects "Source system ID" and "Controlling area".
PERFORM FILL_RSRDEP USING I_AREA
                          I_CHANM
                          ITO_CHADEP
                    CHANGING LT_RSRDEP
                             L_SUBRC.
IF L_SUBRC NE 0.
*Abhängige Merkmale müssen in der ITO_CHADEP stehen
MESSAGE X099(UPC).
ENDIF.
Does anybody have this problem before. ?
Regards Detlev

Hi,
it looks that your 0COSTELEMNT has been changed and the additional compounding object 0SOURSYSTEM has bben added. In BI Content it is only compounded to 0CO_AREA. So may be this is the problem.
To be sure that it works you must make the change in your source system to and "compound" 0COSTCENTER to 0SOURSYSTEM. Or you have to chabge the retraction that way that it ignores the source system and only reads 0CO_AREA and costcenter.
Regards,
Juergen

Datasource for plan value in cost center accounting

Hi
I would like to create query for plan value that maintain in source system via tcode KP06
(Controlling > Cost center accounting > Planning > Cost and activity inputs). Can experts please share with me which datasource to turn on in order to send the data to BI for reporting?
Thanks
Kang Ring

Hi,
Try 0CO_OM_CCA_1.

Company code currency in cost center accounting

Hi,
If I have 2 company codes with different local currencies (SEK and NOK) in a common controlling area with SEK. How do I get the amounts in cost center accounting in company code currency NOK? Is this possible? I can only see reporting currency, object currency and transaction currency.
Regards,
Agneta

Hi,
If your CO objects for company code with NOK are set to NOK as well, you can use object currency.
Regards,
Eli

Cost center accounting

Hi Friends,
can you any one tellme about cast center accounting and general ledger
    iam new to this modules, in cast center accounting what cubes are available, what's the flow could you plz explain.
                  in general ledger also.
                                                                       thanks......

Both are pretty extensive areas. I am sending you the links.
At a higher level GL accounting will account for each item of income, expense, asset and liability of an organization and mainly for externa; reporting purposes.
Where as Cost centre accounting is more for internal monitoring of expenses, cost centrewise.
PL go thru the following links and if you have any specific questions, pl post it here.
Ravi Thothadri
R/3 :
Cost centre accounting: http://help.sap.com/saphelp_47x200/helpdata/en/5b/d2200743c611d182b30000e829fbfe/frameset.htm
GL accounting:
http://help.sap.com/saphelp_47x200/helpdata/en/56/df293581dc1f79e10000009b38f889/frameset.htm
BW:
Data sources, cubes, etc:
http://help.sap.com/saphelp_nw2004s/helpdata/en/65/7beb3cad744026e10000000a11405a/frameset.htm

1_CO_PA_AFS_CCA(cost center accounting) DS enhancement

hi friends,
i'm trying to extract COPA : Profitability Analysis data using 1_CO_PA_AFS_CCA(cost center accounting) to custom cube directly(i.e Data source to custom cube without any staging in between datasource & cube).
In ECC6.0 (tcode: CK40N and then costs ), per material wise i want to extract labour costs, deprecision, power & fuel, sub contract charges,other manufacturing costs along with this i want to extract i field information "costing lot size".
I want to extract "costing lot size", but data source doesn't have this field. Is it possible to enhace DS.
If yes, how to do that?
Thanks,
naresh

Hello Shruti,
Can you give more explaination about the problem
Thanks & Regards,
NK.A

BPS retraction part for Cost center accounting

hi All
Can any body help me regarding the retraction part for cost center accounting bw-bps, how the retraction is exactly done . when part is where the data
comes sits in bw and R/3 .
how exactly plan data sits in r/3 what is the relation
while extrating the data into the bw, what is procedure for extracting in to the transactional cubes
prs

This post could give you some info:
CCA Retraction with BW BPS
Hope it helps.
Regards

Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
Sonia

Hi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

Copy from planning to Budget in Cost Center Accounting (Controlling)

Hi to All,
Currently we are using the SAP 4.6C Version.
Is there anyway to copy the planned version into Cost Center Budget when using the TCODE:KPZ2 (Cost Center Budget).
SAP has provided the same option when dealing with Internal Orders. We can copy the Planned Version by Edit->Copy View and in Setting->Planned Total Version we can set the version what we want.
Is there any way to perform the above funtionality under Cost Center Accounting.
Thanking you all in advance.
Samad Farooq

Hi,
Good evening and greetings,
Please go through the following SAP OSS note
Note 15966 - Copy Planning: Only Manually-Planned Values
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

BPS Retraction for cost center accounting

hi guys,
   When i create sender structure for retraction,need to specify the retraction target(eg UPB_RET_COPS) using drop down to find.But i can't find any value after using drop down button.So i want to know how and where to define the retraction target,in BPS or R/3?
   The dictionary structure has the same problem.
   And what do mean the fields of 'offset' and 'sender field lgth'?
   Need your help!
   thanks a lot!
frank feng

Hi,
Go through following links where u can get a fair idea for u r problem:
/people/praveen.mayalur/blog/2006/07/01/bps-retraction-for-cost-center-accounting--i
/people/praveen.mayalur/blog/2006/07/11/bps-retraction-for-cost-center-accounting--ii-primary-cost-qty
Thanks,
Debasish

Cost center account determination

Hello All,
When I created outbound delivery for a sales order, on the goods movement tab, cost center automatically assigned to the line item.
Could you please inform me how the system derive this cost center?
Thanks in advance!
Best Regards,
JHeRo

Hello Raj,,
Thanks for the feedback.
But I am looking for cost center account determination and not GL.
Could you please help me on this.
Thanks in advance!
JHeRo

Help to find business / technical content for cost center accounting

Hi all,
I am a new to BW. Where can i find the technical and business content for cost center accounting info cube (data from R3) and the equipment info cube ZMXCART_XX(data from flat files). These are the two cubes which i learnt from training.
Does SAP BW provide techinal and business content for its demo cubes and how can i find them?
Please forgive if my question is too basic and crude.
Thanks
ak

hi AK,
you can find from help.sap.com or bi best practice
http://help.sap.com/saphelp_nw04s/helpdata/en/cb/149b3979e90e1be10000000a114084/frameset.htm
the steps ...
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Financial ... Controlling ... Overhead Cost Controlling ... Cost Center Accouting ...
http://help.sap.com/saphelp_nw04s/helpdata/en/6e/d80c3c99d56448e10000000a114084/frameset.htm
see infocube
http://help.sap.com/saphelp_nw04s/helpdata/en/43/d90c3c99d56448e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cb/149b3979e90e1be10000000a114084/content.htm
hope this helps.

Library develop report with report painter in Cost Center Accounting

Similar Messages

Maybe you are looking for