Library doesn't show up after attempted upgrade

Error 1324 the path to my pictures contain invalid entry, is what it says when it gets ready to install 6. Now I can't access my library, any thoughts?

hi Debi!
hmmm. are you still getting the 1324 on the upgrade? or is it a new error?
I took your advice and disabled anti-virus and my Itunes came back ... Will I have to disable every time I want access?
just checking. what security package are you using? Norton Internet Security 2005, by any chance?
love, b

Similar Messages

  • I have Windows 7 main library, iMac with additional library and Apple TV that I want to use home sharing, but windows library doesn't show as a computer on Apple TV.

    I have music and movie library on an external drive connected to a Windows 7 machine. I also have home movies and other content on an iMac that I use.  I want to turn on home sharing for both and connect them to Apple TV for display, music and podcast.  They are all on the same wifi home network, but the Windows library doesn't show up on the ATV device.
    I turned off all Windows firewall and I tried to configure port forwarding, but that didn't help.
    I will say that this did work at some point, so a patch or an update, or some configuration change has caused it to stop workin at some point in the past six months to a year.

    Hello, aquilinofromtuckahoe. 
    Here is the best resource for troubleshooting steps when experiencing issues with Home Sharing. 
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Regards,
    Jason H. 

  • I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question).

    I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?

    Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help

  • Why My iPhone 4 doesn't have sound after I upgrade it to IOS 7.0.2

    Why My iPhone 4 doesn't have sound after I upgrade it to IOS 7.0.2?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • Login window doesn't show up after installing

    So I downloaded all the updated released yesterday, including 10.5.2 combo update, Leopard Graphics Update 1.0 & iLifeSupport 8.2. Then I installed them all, restarted my Mac just fine. However, after I installed Application Enhancer & logged out, the login window couldn't show up ever since.
    Then I tried the following solutions:
    1 startup in single-user mode, fully mounted the boot volume, removed /Library/Application Enhancers & /Library/Preferences/Application Enhancer.prefPane ; then I tried to reboot, login window didn't show up.
    2 startup in single-user mode again, fully mounted the boot volume, used the following command:
    mv /Library/StartupItems StartupItemsOld
    mv /Library/Preferences/SystemConfiguration/preferences.plist preferenceOld
    mv /Library/Preferences/loginwindow.plist loginwindowOld
    mv /Library/Preferences/DirectoryService DirectoryServiceOld
    rebooted again, login window still doesn't show up.
    So if anyone could help me out, Thank you very very much!
    also, I found two strange files in the root directory: mach_kernel, mach_kernel.ctfsys. What are this two files for?

    Sounds like you need to run the repair disk routine on the installation disk's version of Disk Utility. Failing that, you could try going into single user mode on startup. Restart the Mac while holding both CMD & S. When you see the code screen and prompt >, type *fsck -fy* (note the space after the k) then hit return. Hopefully things get repaired. Once complete type reboot and hit return

  • Library shortcut not showing up after Connect to Office in SharePoint 2010

    I clicked "Connect to Office" in the library ribbon. The shortcut to the site showed up under Favorites in window's explore.  But the library is not showing up. 
    The browser is IE 9, 32 bit.
    any idea why the library shortcut not showing?

    Hi, 
    According to your description, after Connect to Office, The shortcut to library is not showing up under SharePoint Sites.
    I have met the same issue with you, and I solved the issue by the following:
    Delete SharePoint Sites under Favorites in window's explore and go to C:\Users\Your user account, delete the SharePoint Sites folder. 
    Go to  Connect to Office-> Click Manage SharePoint sites-> Delete all the library links.
    Go to  Connect to Office-> Click add to SharePoint sites again and check the result.
    If the shortcut to the site doesn’t show up under Favorites in  Windows explore, 
    go to C:\Users\Your user account, copy the SharePoint Sites folder, paste it into Favorites in Windows explore. 
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact 
    [email protected]

  • Windows 7 Music Library doesn't show some of my album art all of a sudden. No solutions found!!

    So my music files in my music folder on the computer still doesn't show the album art. some of the art covers still exist on the music files but newly downloaded and some music files that existed don't show the album art anymore.
    I've tried most of the solutions online but none of them solved the problem. I don't think it's the media player because when I play it on the media player it shows the album art for the music. And I also cleared the cashe in the mediaplayer folder. There
    must be something with the system because the folder showed the cover art before but all of a sudden it stopped displaying them. 
    I don't know what's wrong with it...is there something that makes the music album art not show all of a sudden and the album art doesn't show for the newly downloaded music as well...

    Hi haydnan
    It may be a problem of Windows 7 Explorer. First you can try all the different explorer views, title, Large icon..
    If there is no effect, you can try to the following methods.
    In Windows Explorer
    1. left click on the mail folder where your music is stored and select it.
    2. Now right click and go to “properties”.
    3. Now click “advanced”.
    4. Put a check in the “Allow files in this folder to have contents indexed in addition to file properties”.
    5.Click ”OK”.
    6.Click”Apply”.
    7. Click “OK” to apply changes to this folder. Sub folders and files.
    Now go to your music library and see if it works.

  • Photo pages don't show photos after iWeb upgrade

    I loaded the upgrad yesterday for my 08 iWeb and now the photos that I published prior to upgrade don't show up on my site. Strangely, the Album page shows the photos in each album, but when I click into the photo page itself, no photos are visible and also the "index, play slideshow, subscribe" don't work either. Any new photo page I created after the upgrade looks fine. Everything looks clean in iWeb software itself. Photos don't show up on the site. What's up with this? Thanks for the answers.

    Mine is doing the exact same thing - thought the update would solve the issue. The drop down menu says there are missing fonts, then it tells me to put the photos on the page again, which is ridiculous. iWeb '06 to '08 is the problem as anything added to it since upgrading to the latter works fine. Apple won't seem to acknowledge that they've introduced incompatible software, which is more like the doings of Microsoft.

  • Evolution doesn't show inboxes after update

    Hello,
    my Evolution hides the inboxes for 3 of my 5 configured imap accounts after upgrading. These are the related lines from /var/log/pacman.log:
    [2014-06-04 17:36] [PACMAN] upgraded evolution-data-server (3.12.1-2 -> 3.12.2-1)
    [2014-06-04 17:37] [PACMAN] upgraded evolution (3.12.1-1 -> 3.12.2-1)
    Subfolders and even my 2 other inboxes are working fine. The filter is set to "all messages" and I have also tried to toggle the offline mode on and off.
    Also strange: when I issue a search that does not yield any results, I get a message that no messages were found and that I should try to clear my filters.
    When I open a folder with no content I also get a warning - but for this 3 inboxes I really just get a blank list view (the headers are shown).
    The only thing that these 3 inboxes have in common are that a GPG key is assigned, but I don't see any difference when I remove it from the configuration (or even recreate the mail account).
    I also tried to delete $HOME/.cache/evolution - no difference. When I open evolution from the command line I don't get any output, so nothing obvious here.
    Maybe someone had the same problem and solved it already?
    Greetings and thanks in advance,
    Phil

    Hey,
    I have the same Problem since the Update. With upgrading Evolution something might gone wrong with our profile. I've deleted all the settings and restored a freshly created backup. The Problem remains the same.
    You can work around by going into that "empty" inbox, switch search to all accounts and search something. After some results are showing, you delete your search and Evolution will display your inbox. It happens to me everytime I start it and sometimes when switching back from an another account.
    After the upgrade I have several segfaults which I cant exactly reproduce, When it does, the window seems to have a small lag and gets killed. This is not only when switching windows within Evolution (or using the editor), it also happens when switching onto it from a another workspace.
    Greetings.

  • Search in Mail doesn't show results after Migrating

    If I search for a word or an adr. in Mail nothing show up. Unless I've just read the mail. Like that newly read email is the only one being searched in ..?
    This happened after moving my user account to a new MacPro with Migration Assistant.
    (first a clean install of 10.7 on a new disk in bay 1 on the "new" MacPro and updating to 10.7.5 - Starting up from the new disk with my "old" HD in bay 2 on the new machine and using Migration Assistant to move all my data over to the new disk in bay 1)
    Same Mac OSX version, but MacPro version from 1.1 to 3.1
    Also Spotlight doesn't show results.
    Is there a way to make a new "search cache" or whatever that overview file is called ...
    Suddenly now, when not getting any search results, I see how much I use search in Mail and Spotlight ... !
    Thanks

    Try posting this in the 10.7 Mail forum. You'll get more help there.
    DALE

  • App doesn't show up after it downloads.

    I rebooted the iPad but it still doesn't show up. What's the problem?

    I just read on another thread that some users can't find IBooks after they download it. A hard reset was recommended. Hold down on the sleep and home buttons simultaneously for about 10 seconds until the Apple logo appears, ignore the red slider, let go of the buttons and let the iPad restart.
    The app may also be on another screen so try swiping from screen to screen and look inside any folders you have as well.

  • USB Dard drive doesn't show up after i failed to eject it

    i turned off a usb external drive without ejecting it first and now it doesn't show up on the desktop,
    when i run disk utility it just shows the gathering disk information but doesn't get past this unless i turn off the drive again. is there a way of fixing this as i've has it happen before and after a while the drive comes back after i leave it for a while.

    for some reason it just came back on after i left it for 10 minutes.

  • Skype window doesn't show up after logging in

     After I log in to Skype I see the icon show up in my task bar but the window doesn't show up and clicking on the icon doesn't do anything.
    And the times when the window DOES show up after signing in, it's not responding. 
    Is there a way to fix this? I have the latest version of Skype and am using Windows 8.1

    Please,  run the DirectX diagnostics tool (32-bit version).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • My Library Doesn´t Show All Events

    Hi!
    After a data crash my library shows only half of existing events. The "missing" pictures / events seam to be okay - I can open them in Finder.
    How can I rebuild my library without importing the pictures again?
    TIA HJ

    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

  • IPhoto automatically shuts down after attempted upgrade

    I have the latest version of iPhoto, but when I try to open it, I get the following message:
    The photo library needs to be upgraded to work with this version of iPhoto.
    Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
    When I hit "upgrade," it just shuts down. No upgrade. No iPhoto.
    Anything I can do?

    As a test dpress and hold the option key while launching iPhoto and create a new test library - import a few photos into this test library and report back with the results of this test
    LN

Maybe you are looking for