Library("???") failed; the specified module could not be found
After Setting up windows 2003 server and setting up the plugin the , I tried to enable it from windows media server , but i faced the following error:the plugin reported an error ... 0xc00d157d
and when i tried to register the libraries at installation folder manually using regsvr32 command , i recieved
library("???") failed; the specified module could not be found
Should I install oracle 9i client on windows 2003 server ???
please reply urgently
Which plugin?
OK, I assume the Microsoft Media server?
Yes, the readme lists oracle9i client is necessary as a minimum... It is used to communicate with the database (although I think it is best to have the DB on the same machine as the MMS Plugin).
9i client is included if your DB is installed on the windowa machine.
Larry
Similar Messages
-
Loadlibrary ("olkexpress5.dll") failed - The specified module could not be found.
About a month ago, the Desk Manager app stopped recognizing that my blackberry was connected via usb so I decided to remove/reinstall the Blackberry Desktop 4.3 software. Now, everytime I install the software I receive the following message during the installation:Errors 1904.Module C:\Program Files\Research In Motion\Blackberry\IS71 Connectors\OE Connector\OLKExpress5.dll failed to register. HRESULT-2147024770. Contact your support personnel. If I try to manually register the file it fails with the following error "Loadlibrary ("olkexpress5.dll") failed - The specified module could not be found." My the desktop manager currently will recognize my blackberry as long as I don't disconnect the blackberry before first powering off the laptop. Any one have any ideas regarding this issue?
Perform clean uninstall of BlackBerry Desktop Software.
Check for instruction: http://www.blackberry.com/btsc/KB02206
After that go to here: http://na.blackberry.com/eng/services/desktop/
and download the latest (v4.7) BlackBerry Desktop Software.
I recommend to download BlackBerry Desktop Software without Media Manager.
Media manager is not necessary to transfer files to the device and vice versa.
Check this link: HOWTO : use your blackberry as a USB device -
Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
GhosalHello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal -
I initially got the Error -2032 message after downloading the newest version of itunes. I read a geek blog that said to uninstall Quicktime and I did that a bunch of times. I also uninstalled and reinstalled itunes repeatedly. None of this works. I noticed that the apple website said the requirements for the new quicktime/itunes download included an intel processor and I have a celeron processor, so I wondered if that was the problem, although everything has been running fine up until now, so I don't know. It also doesn't address the missing .dll file, but I may have accidentally deleted that because I went into the registry to try and unload some Quicktime files when I uninstalled Quicktime. I did this at the suggestion of the blog, but I may have screwed it up. Now I need to repair the missing .dll and still try to get itunes running
ErikEJ wrote:
Have you set your solution target to "Any CPU" ?? If so, set to "x86", as SQL Compact only runs in WoW mode on x64. Or use corflags.exe /32BIT+ against your project output (.exe file).
ErikEJ wrote:
Look at this blog post for a walk-through: http://erikej.blogspot.com/2008/01/x64-and-sql-compact.html
Hello everyone,
I have the same problem as mentioned above "Unable to load DLL 'elev.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) ", when trying to load the dll file into a window application. I developed a window application in VS2005 and want to import a dll file from another program into my project and use it. But when I try to call one of the function in the dll file, I got the error message "Unable to load dll 'elev.dll". I try all options that say it works to solve this problem, but somehow it doesn't work for me. I put the "elev.dll" file in the bin folder and use P/Invoke to import the dll file into my project. Can anyone help me out with this? thanks and really appreciated!
Here is how I import the dll:
[DllImport(@"D:\elev.dll")]
//[DllImport("emap.dll", SetLastError = true)]
private static extern void EMA_Init();
and in the code, I call the function above but failed to load the dll file
EMA_Init(); -
O/S-Error: (OS 126) The specified module could not be found.
i get this error in my vb6.0 application...
"O/S-Error: (OS 126) The specified module could not be found.
ROW-00054: Cannot load the library"
Assuming my connection is fine...
DB is oracle 9.2.0.4 patch installed,MDAC 2.8,VB6.0
My code snipped goes like this...
conn.Open "Provider=OraOledb.Oracle;User ID=test;Password=test;DATA SOURCE=oracle.world;UseSession Format=1"
objADOCommand.CommandText = "select * from wfmuser"
objADOCommand.ActiveConnection = conn
adorec.CursorLocation = adUseClient
objADOCommand.Properties("IRowsetChange") = True
objADOCommand.Properties("Updatability") = 7 ' Insert, Delete and Update
Set adorec = objADOCommand.Execute
it gives me the error upon execution of above line.
i have reinstalled the OLEDB provider,as well as MDAC.
but of no help...
i have even cheked my OS path for oraHome entry.
please respond ASAP...i am stuck.Searching the web for "loadlibrary failed with error 126 java" seems to point to issues with OpenGL and certain video drivers and/or environments with multiple monitors. Here are several discussions...
https://netbeans.org/bugzilla/show_bug.cgi?id=243153
Error "LoadLibrary failed with error 126: The module could not - Microsoft Community
[SOLVED] Issue with Technic Launcher: Load Library failed with Error 126 - Technic Launcher - Technic Forums
So it seems this issue is not specific to SQL Developer. The last discussion includes a video link in its last post saying that ".dll" is searched for rather than "atioglxx.dll" on 32-bit systems or "atio6axx.dll" on 64-bit system (in the C:\Windows\system32 folder), so a workaround is to copy one of those to ".dll". -
Dboraslib.dll - Error 126 : "The specified module could not be found."
Hi,
After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
The dev_disp trace file shows the following error:
Please do help to resolve this problem.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 09 12:14:43 2004
kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
length of sys_adm_ext is 524 bytes
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 1
intno 0
make: multithreaded, Unicode
pid 2908
***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c 1093]
shared lib "dw_xml.dll" version 1 successfully loaded
shared lib "dw_xtc.dll" version 1 successfully loaded
shared lib "dw_stl.dll" version 1 successfully loaded
shared lib "dw_gui.dll" version 1 successfully loaded
Mon Aug 09 12:14:48 2004
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3878]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2506872 (12472)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06440040, size: 2919328)
DpShMCreate: allocated sys_adm at 06440040
DpShMCreate: allocated wp_adm at 06441B58
DpShMCreate: allocated tm_adm_list at 06444478
DpShMCreate: allocated tm_adm at 064444A0
DpShMCreate: allocated wp_ca_adm at 066A8518
DpShMCreate: allocated appc_ca_adm at 066AE2D8
DpShMCreate: allocated comm_adm_list at 066B0218
DpShMCreate: allocated comm_adm at 066B0230
DpShMCreate: allocated vmc_adm_list at 066F6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 066F6F28
DpShMCreate: allocated wall_adm at 066F6F30
MBUF state OFF
Mon Aug 09 12:14:49 2004
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
<ES> 613 blocks reserved for free list.
ES initialized.
Mon Aug 09 12:14:52 2004
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1352
argv[5] = -DLISTEN_PORT=1353
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=SXI
argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c 1455]
***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c 9701]
Mon Aug 09 12:14:54 2004
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 1
Release check o.K.
Mon Aug 09 12:15:33 2004
ERROR => W0 (pid 3224) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3240) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3248) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3256) died [dpxxdisp.c 12152]
ERROR => W5 (pid 3264) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3272) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3280) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3224 (SIGUSR2)
ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c 2464]
killing W1-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2464]
killing W2-3240 (SIGUSR2)
ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c 2464]
killing W3-3248 (SIGUSR2)
ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c 2464]
killing W4-3256 (SIGUSR2)
ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c 2464]
killing W5-3264 (SIGUSR2)
ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c 2464]
killing W6-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c 2464]
killing W7-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2464]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:43 2004
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 09 06:45:43 2004
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3224 Ended no 1 0 0
1 DIA 3232 Ended no 1 0 0
2 UPD 3240 Ended no 1 0 0
3 ENQ 3248 Ended no 1 0 0
4 BTC 3256 Ended no 1 0 0
5 BTC 3264 Ended no 1 0 0
6 SPO 3272 Ended no 1 0 0
7 UP2 3280 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 09 06:45:43 2004
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Mon Aug 09 06:45:43 2004
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Aug 09 06:45:43 2004
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:48 2004
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
killing process (3216) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 3 from selectset
DpDelSocketInfo: del info for socket 3 (type=7)
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 456
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 448
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3172) (SOFT_KILL)
Stop icman
killing process (3196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3172 HANDLE:472)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:49 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3172 HANDLE:472)
[DpProcDied] Process died (PID:3196 HANDLE:464)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:3216 HANDLE:440)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:50 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:51 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:52 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:53 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:54 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:56 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:57 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:58 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:59 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:00 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:01 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:02 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:03 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:04 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:05 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:06 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:440)
NiIMyHostName: hostname = 'cgnlpt036'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 368
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c 8460]
Good Bye .....Hi,
Thanks for the reply.
dboraslib.dll is properly installed - I checked the registry and physical location of the file.
The problem was : Environment variable "Path" not being set properly for the "oracle jre".
Solution:
After setting the path, the dispatcher started to run properly without any problems.
Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
FYI - We are using WIN2K with SP4 and oracle DB 9.2
Regards,
Sridhar -
ImportError: DLL load failed: The specified procedure could not be found.
Hi,
I am new to Python. I'd like to try and connect to Oracle 10.2.0.4 database using Python. I have Oracle 10g client installed. When I try to import cx_Oracle I get the error below.
If anyone can help me how to solve this, I will be grateful.
C:\Users\milivojm>set path
Path=C:\Oracle\OraClient10g\bin;C:\Oracle\OraClient10g\jre\1.4.2\bin\client;C:\O
racle\OraClient10g\jre\1.4.2\bin;C:\Oracle;C:\Oracle\OraOdac11g;C:\Oracle\OraOda
c11g\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program File
s\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\CollabNet Subversion;C:\P
rogram Files\jZip;C:\Program Files\QuickTime\QTSystem\;D:\Python\
C:\Users\milivojm>python
Python 2.6.2 (r262:71605, Apr 14 2009, 22:40:02) [MSC v.1500 32 bit (Intel)] on
win32
Type "help", "copyright", "credits" or "license" for more information.
import cx_OracleTraceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: DLL load failed: The specified procedure could not be found.
exit()C:\Users\milivojm>dir c:\Oracle\OraClient10g\bin\
Volume in drive C has no label.
Volume Serial Number is B0A4-2659
Directory of c:\Oracle\OraClient10g\bin
21.11.2008 15:29 <DIR> .
21.11.2008 15:29 <DIR> ..
06.03.2004 03:19 108.920 cemutls.exe
27.01.2004 04:49 86.124 COREJAVA.DLL
21.11.2008 15:28 1.024 emca.bat
08.03.2004 17:15 52.552 extjob.exe
08.03.2004 17:15 52.552 extjobo.exe
07.02.2004 22:52 28.672 launch.exe
21.11.2008 15:27 659 lbuilder.bat
27.01.2004 06:47 81.948 LCSSCAN.EXE
27.01.2004 06:46 43.064 LMSGEN.EXE
08.03.2004 17:12 16.656 loadpsp.exe
06.03.2004 03:20 96.592 lsnodes.exe
27.01.2004 06:46 68.556 LXEGEN.EXE
27.01.2004 06:46 276.908 LXINST.EXE
21.11.2008 15:28 484 mkstore.bat
21.11.2008 15:27 1.149 netca.bat
21.11.2008 15:27 108 netca_deinst.bat
08.03.2004 17:59 188.416 oci.dll
08.03.2004 17:16 32.768 ociw32.dll
10.02.2004 13:13 110.592 ODBTREEVIEW.OCX
21.04.2005 04:13 864.256 oip10.dll
21.04.2005 04:05 75.500 oip10.tlb
21.11.2008 15:27 525 olsadmintool.bat
21.11.2008 15:27 546 olsoidsync.bat
10.02.2004 13:12 73.728 OO4OADDIN.DLL
10.02.2004 13:12 69.632 OO4OCODEWIZ.DLL
10.02.2004 13:12 20.480 OO4OCODEWIZ.EXE
21.04.2005 04:05 24.576 oraansi10.dll
21.11.2008 15:27 34 oracle.key
05.03.2004 19:15 20.480 OracleAdNetConnect.exe
05.03.2004 19:15 24.576 OracleAdNetConnectRCUS.dll
05.03.2004 19:16 24.576 OracleAdNetTest.exe
05.03.2004 19:16 24.576 OracleAdNetTestRCUS.dll
08.03.2004 16:39 1.909.008 oraclient10.dll
21.04.2005 04:14 241.664 oraclm32.dll
10.03.2004 16:09 749.840 oracommon10.dll
27.01.2004 04:49 688.400 ORACORE10.DLL
06.03.2004 03:16 57.616 oradbcfg10.dll
10.02.2004 13:17 386 oradc.lic
21.04.2005 04:13 102.400 oradc.ocx
08.03.2004 16:39 4.235.536 orageneric10.dll
14.03.2004 10:43 327.952 orahasgen10.dll
26.03.2004 17:11 77.824 oraimr10.dll
05.03.2004 19:14 45.056 orajmisc.dll
27.01.2004 17:16 278.800 oraldapclnt10.dll
27.01.2004 17:16 258.320 oraldapjclnt10.dll
27.01.2004 06:46 37.136 ORALXLED.DLL
05.03.2004 19:25 946.448 oran10.dll
05.03.2004 19:15 37.136 oranad10.dll
05.03.2004 19:11 33.040 oranbeq10.dll
05.03.2004 19:12 24.848 ORANCDS10.DLL
05.03.2004 19:11 94.480 orancrypt10.dll
05.03.2004 19:11 24.848 oranhost10.dll
05.03.2004 19:11 33.040 oranipc10.dll
05.03.2004 19:12 143.632 oranjni10.dll
05.03.2004 19:11 180.496 oranl10.dll
13.03.2004 03:40 74.000 oranldap10.dll
10.03.2004 20:42 33.040 oranldapj10.dll
27.01.2004 06:45 586.000 ORANLS10.DLL
12.03.2004 01:23 1.544.353 oranmemso.dll
05.03.2004 19:11 33.040 orannmp10.dll
05.03.2004 19:12 28.944 orannzentr10.dll
05.03.2004 19:12 28.944 ORANNZMCS10.DLL
05.03.2004 19:11 962.832 orannzsbb10.dll
05.03.2004 19:12 53.520 oranoncj10.dll
05.03.2004 19:10 221.456 oranro10.dll
05.03.2004 19:12 37.136 oransgr10.dll
05.03.2004 19:11 49.424 orantcp10.dll
05.03.2004 19:12 49.424 ORANTCPS10.DLL
05.03.2004 19:11 24.848 orantns10.dll
05.03.2004 19:13 28.944 oranzts10.dll
06.03.2004 03:16 209.168 oraocr10.dll
14.03.2004 20:50 147.728 oraocrb10.dll
21.04.2005 03:54 438.272 OraOLEDB10.dll
21.04.2005 03:54 1.608 OraOLEDB10.tlb
21.04.2005 03:55 24.576 OraOLEDB10us.dll
21.04.2005 03:53 131.072 OraOLEDBgmr10.dll
21.04.2005 03:54 32.768 OraOLEDBpus10.dll
21.04.2005 03:45 24.576 OraOLEDBrfc10.dll
21.04.2005 03:46 24.576 OraOLEDBrmc10.dll
21.04.2005 03:53 139.264 OraOLEDBrst10.dll
21.04.2005 03:43 24.576 OraOLEDButl10.dll
21.11.2008 15:28 483 orapki.bat
08.03.2004 17:07 1.052.944 ORAPLP10.DLL
08.03.2004 17:06 2.867.472 ORAPLS10.DLL
04.02.2004 00:10 28.944 ORASLAX10.DLL
27.01.2004 06:46 69.904 ORASNLS10.DLL
11.03.2004 21:35 483.600 ORASQL10.DLL
09.03.2004 21:46 61.712 orasrvm10.dll
06.03.2004 03:17 143.632 orasrvmhas.dll
27.01.2004 06:45 78.096 ORAUNLS10.DLL
27.01.2004 04:49 28.944 orauts.dll
27.01.2004 04:49 830 orauts.sym
08.03.2004 16:39 24.848 oravsn10.dll
03.02.2004 07:56 10.240 orawsec9.dll
03.02.2004 23:58 1.473.868 ORAXML10.DLL
30.09.1999 17:43 2.478 orclcontainer.bmp
30.09.1999 17:43 2.478 orclcontext.bmp
03.08.1999 19:00 246 orcldbserver.bmp
30.09.1999 18:10 3.310 orclnetservice.bmp
24.02.2004 13:11 57.344 OsUtils.dll
10.03.2004 19:17 60.280 sclsspawn.exe
21.11.2008 15:29 321 selecthome.bat
21.11.2008 15:28 266 selecthome.bat.oo4o
21.11.2008 15:29 55 selecthome.bat.oraoledb
27.10.2004 10:14 434.176 sqora32.dll
27.10.2004 10:16 65.536 sqoras32.dll
27.10.2004 10:16 32.768 sqresus.dll
21.11.2008 15:28 3.433 targetdeploy.pl
05.03.2004 19:17 37.084 TNSPING.EXE
21.11.2008 15:28 260 trcasst.bat
30.11.1999 12:32 145.408 unzip.exe
16.07.1998 18:36 104.448 zip.exe
112 File(s) 25.228.632 bytes
2 Dir(s) 8.552.009.728 bytes freeYou have oracle 10g and python 2.6. Are you sure you installed the cx_Oracle version that is compatible with those particular Python and Oracle's versions? (It comes in several flavours so you need to be sure you installed the right one).
-
Designer: dbd_sap.dll (the specified module could not be found)
Hi,
I installed BO Edge XI 3.1 server on Linux and the Edge XI 3.1 clients on WinXP PCs as well as the SAP Integration Kit on the server as well as on the clients. The transport files were imported too.
I can successfully connect to BW within the CMC -> Authentication -> SAP. I also can logon to InfoView, Designer,... with SAP BW credentials.
When I am trying to create a new universe and universe connection with SAP credentials I get the error:
"The error 'cs:dbdriver failed to load : c:\program files\business objects enterprise 12.0\win32_x86\dataaccess\connectionserver\dbd_sap.dll (the specified module could not be found)"
The dbd_sap.dll file is in the correct folder.
We re-installed the Integration Kit and rebooted, no success.
We are currently uninstalling all BO products (Client tools, Crystal Reports 2008, Integration Kit) on that client and will try again.
We are on the base version of the products mentioned; I read the changelog of the ServicePacks, it seems that none of the 2 SPs made a correction regarding this error.
What could be the error?
Thanks!>
Efstratios Karaivazoglou wrote:
> Make sure to use CR Designer 2008 V1 (WITHOUT SP2) unless you install SP2 for BO Edge.
OK, so I will only install the BO Client Tools as well as the SAP Integration Kit. I don't necessarily need CR at this moment.
@ Raghu: we are on the base version of the BO Edge and SAP Integration Kit installation (= no SP, no FP)
EDIT:
I now installed the BusinessObjects Client Tools and the SAP Integration Kit on another PC, the error didn't occur on this PC -
I'm new to ADO.NET and need help with this error.
Currently running Vista Home Premium 64 and Visual Studio 2008 Trial.
1. Create Win form app.
2. Add new data source...
3. New connection - SQL Server Compact 3.5 - Northwind.sdf
4. Highlight Products and Suppliers.
5. Drag both onto Win form
6. Run with debug
7. Error message "Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"
some blogs advice change dir in SQL Server Compact 3.5 in regedit but regedit doesn't even have SQL Server Compact 3.5; only SQL Server\SQLExpress.
reinstall SQL Server Compact 3.5 and problem still exists.
anyone knows how to fix this problem?ErikEJ wrote:
Have you set your solution target to "Any CPU" ?? If so, set to "x86", as SQL Compact only runs in WoW mode on x64. Or use corflags.exe /32BIT+ against your project output (.exe file).
ErikEJ wrote:
Look at this blog post for a walk-through: http://erikej.blogspot.com/2008/01/x64-and-sql-compact.html
Hello everyone,
I have the same problem as mentioned above "Unable to load DLL 'elev.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) ", when trying to load the dll file into a window application. I developed a window application in VS2005 and want to import a dll file from another program into my project and use it. But when I try to call one of the function in the dll file, I got the error message "Unable to load dll 'elev.dll". I try all options that say it works to solve this problem, but somehow it doesn't work for me. I put the "elev.dll" file in the bin folder and use P/Invoke to import the dll file into my project. Can anyone help me out with this? thanks and really appreciated!
Here is how I import the dll:
[DllImport(@"D:\elev.dll")]
//[DllImport("emap.dll", SetLastError = true)]
private static extern void EMA_Init();
and in the code, I call the function above but failed to load the dll file
EMA_Init(); -
[SBO2004] Connecting to DIApi: "The specified module could not be found"
Hello all,
A stand-alone program that connects to the DIApi intermittently suffers from the error upon the call to DICompany.Connect() with code -2147024770 and Description "- The specified module could not be found" (this is the exact description returned by DIapi, including the minus sign).
The worst thing is that on some days it works while on other ones it fails with the above error, and I cannot find any changes to the environment that affect the program's behaviour. Every time the program is run from the same place on the same machine.
Could you please suggest where to search for the cause of the problem?
Thanks in advance,
AntonUsing PS cc, the problem relates to all images as they are set to open in PS, and the message appears immediately,.i have noticed that my start up screen has changed in appearance I am using a Asrock board - could be a coincidence but the problem has only started this week 08.02.15
I am using windows 7 home premium
Thanks. -
HPHP Officejet Pro x64 The specified module could not be found
Installed the full version and then tried the basic version for windows xp. When asked to plug in the printer the only item I can see installed is fax- HP Officejet Pro 8610. I get a message that there was a problem with the connection and it reads.
HPHP Officejet Pro 8610
The specified module could not be found.
Looking for advice. I tried several printer USB cords and different USB locations on the computer.Hi @Pasi
Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> >>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
Thanks, I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Hi,
I have a asp.net web application running on windows server 2008 with oracle server 10g installed.
now we are planning to run application on another server with same server as database server. but when the deployed on new server the login page comes up and after login System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) exception is thrown. any help would highly be appreciated.Did you run the ODAC installer, OUI or xcopy, or did you just copy over Oracle.DataAccess.dll to the new machine? If the latter, then you need to run the installer to put in all the necessary Oracle DLLs ODP.NET references.
-
I have deployed my SSIS packages on SQL 2008 server.
I have a .bat file which will invoke these packages and also the bat file is placed in the server where the SSIS packages are deployed.
Scenario 1:
I double clicked on the bat file to invoke the SSIS packages and ; this executed successfully
Scenario 2:
I have used the IBM Tivoli work scheduler(TWS) to invoke the bat file which in tern will invoke the ssis packges;
but when i do this i am getting the below error
Code: 0x8007007E
Source: SSIS_Master_Event_Data_Transfer Connection manager "Config DB"
Description: The specified module could not be found.
Config BD is a connection manager which will get the connection string from the config file of the SSIS package.
Please help me to resolve this issue.
Regards,
PrakashCheck you TWS jobmanrc.cmd configuration file. You may need to add a PATH environment variable in that file that includes your SQL Server file locations. When TWS jobs are executed, they may not be executing with the same
PATH variable as when you execute the SSIS outside of TWS. -
Error :the specified module could not be found --oci.dll : Oracle9i
hi ,
i m trying to connect thru my java code to the oracle on my system ,while creating the DSN it gives the error
"the specified module could not be found" for the file oci.dll.
earlier it was not able to look for the sqresus.dll which i copied to the winnt/system directory , and after this oci error is coming , anyone knowing it please guide
with regards,Make sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.
-
The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Hi,
We have an exisiting .NET MVC project which uses crystal reports versions 2008 (dlls of version 12.0.). No we have Crystal Reports 2011 for.NET SDK is installed and I've updated all the crystal related dlls (Enterprise.Framework.dll, CrystalDecisions.Chared, CrystalDecisions.Web ...) to newer version which is 14.0. After this upgrade, when I run application, I am getting the following error:
The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)]
System.Reflection.Assembly._nGetModules(Boolean loadIfNotFound, Boolean getResourceModules) +0
System.Reflection.Assembly.nGetModules(Boolean loadIfNotFound, Boolean getResourceModules) +40
System.Reflection.Assembly.GetTypes() +28
System.Web.Mvc.TypeCacheUtil.FilterTypesInAssemblies(IBuildManager buildManager, Predicate`1 predicate) +161
System.Web.Mvc.TypeCacheUtil.GetFilteredTypesFromAssemblies(String cacheName, Predicate`1 predicate, IBuildManager buildManager) +63
System.Web.Mvc.ControllerTypeCache.EnsureInitialized(IBuildManager buildManager) +115
System.Web.Mvc.DefaultControllerFactory.GetControllerTypeWithinNamespaces(RouteBase route, String controllerName, HashSet`1 namespaces) +58
System.Web.Mvc.DefaultControllerFactory.GetControllerType(RequestContext requestContext, String controllerName) +634
System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) +58
System.Web.Mvc.MvcHandler.ProcessRequestInit(HttpContextBase httpContext, IController& controller, IControllerFactory& factory) +118
System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContextBase httpContext, AsyncCallback callback, Object state) +46
System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContext httpContext, AsyncCallback callback, Object state) +63
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +13
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8770194
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
We have another ASP.Net project, which is working fine after I update older crystal dlls to newer ones. This project is working fine.
Thanks in advanceThis error I am getting, after I update the "CrystalDesicions.Web.dll" from version 12 to 14.0. Any I dea on this?
After, I verified with fusin log and ProcessMonitor, they are reporting on this:
path to BusinessObjects.Licensing.KeyCode.Decoder.dll is not found. Does this dll is used by CrystalDecisions.Web.dll?
and I don't have any mixed reference.
Any help?
Maybe you are looking for
-
Remote client copy performance
Hello experts, I need an opinion on following possibilities that could speed up remote client copy: Increasing maximum number of processes for parallel processing in dialog mode? Increasing the update processes? Decreasing the undo retention from def
-
I'm running a Toshiba Satellite laptop that was originally running Windows Vista 32-bit, but was upgraded by me to Windows 7 32-bit. On Windows Vista, all I would run was Firefox. I loved it!!! On Windows 7, I've noticed that Firefox kept hanging whe
-
plz help me dat hw can i get my new photos back which were on new iphone..bcoz dey were nt backed up..as i connected it for d first time through itunes.. all my preveious photos has been restored..and new one r no more..plz help me..dere were 1000 ph
-
How to Get More Hits - Clicks - Traffic to Your website
Having trouble getting traffic to your website? Read this Article Read this article
-
[SOLVED]Changing default fonts
I recently updated Netbeans and one of the new dependencies was ttf-bitstream-vera. After updating, all my fonts went wacky, and Monospace now defaults to Bitstream Vera Sans Mono, and all webpages without explicit font settings defaults to Bitstrea