Library Files missing in CS4

I have installed Encore CS4 and notice that I have no resources from which to build menus and background--or the library files that are required for any version.
Encore CS4 defaults to a directory it chose when it was installed but the directory path does not exist and I can find no place where Encore CS4 would have placed these resources.
Apparently, there was a change in the location of the library file from what was used in CS3.
Please assist.

I would suggest you uninstall everything since you have the the Master Collection and do the uninstaller from the Adobe Uninstall utility. Then to make certain you have it properly uninstalled run the clean up utility or script which you can get from the adobe site.
If the utility shows you no apps to uninstall you properly removed the apps more then likely now I would try to go through the trouble of locating the preferences for the Adobe applications and delete them with the bin. Then reinstall everything from the Master Collection.
When uninstallling use the uninstallers that should be present for Encore and Premiere first then use the one for the Master Collection. I think it would be wise to do it this way.
Good luck.

Similar Messages

  • After HD crash, restoring to new HD. Library files missing or corrupt. How can I get iTunes 10 to see my music

    The hard drive on my fairly new HP Pavilion desktop died hard on boot-up. HP replaced the drive the next day.  Used the Recovery Disks and got the unit up and running. I have been using Memeo Premium Backup and never did get any error messages during backup.  When I went to restore the data, much of it is missing or corrupt. In the Restore data on the backup drive, I can see many folders but only a few have data.  I opened a ticket with Memeo and after they made a few useless comments, they closed the ticket.
    Fortunately, most of my iTunes data (folders and files) were restored in-tact.  The exceptions were the library files, which are missing. The library files in the Previous Itunes Library folder were corrupted.  I installed iTunes 10, but there are no songs, podcasts,etc, in it.  I have tried every article in the knowledgebase and tried to fix the ITL and XML files, but it is hopeless. Also, when iTunes is running, at the top it shows .iTunes Preferences.plist.  So, I have a disaster and about 10 gb of music going nowhere.  Any ideas?  I would really appreciate any help I can get.
    Brad

    They are all mostly the same size at around 6MB but there are a couple that are very large 55MB (including the 30 tmp file I mentioned above.  There is also one around 7KB).  I tried renaming the most recent (as of 8:30PM last night)  tmp file as iTunes Library.itl but when I launch iTunes, I get the "The file 'iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" popup.
    But when I go into a directory I created to get the most recent itl file I've been saving as a backup and copy it into the iTunes directory to replace the one that I tried to make with the tmp file, and launch iTunes, my whole library loads with no problem.
    However, if history repeats itself, this will work for at most a couple of days before I have to copy the saved itl file back into the iTunes directory.

  • 10.1.4 library file missing for help and update not working

    Just updated to AR 10.1.4 and everything seems to be working except the help and update functions are not working. I get the message that the library help file is missing. I uninstalled and reinstalled in both FF15 anf IE9 with the same result and I installed from both Adobe and FileHippo with the same result. Anybody have any suggestions?

    On the AR 10.1.4 tool bar menu click the "Help" item and the drop down screen shows a number of items to select from. If I click on "Adobe Reader X Help" I get a message saying "the library file is missing and I should reinstall". As for "check for updates" nothing happens. I've uninstalled and reinstalled AR 10.1.4 from two different browsers, IE9 and FF 15 with no difference. I'm using Vista 32 bit OS.

  • Encore CS4 Library files missing

    I just noticed that I was unable to see the standard menus or buttons in Encore so I checked the Library folder only to find that it does not exist. Any suggestions as to where this folder should be?
    Thanks!

    Hi,
    I'm new here, but have not found a solution to my problem of no library in Encore CS4.  I found one site that had instructions for those of us who bought the discs (Creative Suite 4 production premium) but I cannot seem to get the disc to work properly.
    The instructions were to put in the first disc go to setup.exe, deselect all items, select Encore, custom install, select Adobe Encore CS4 library, and install.  However, when I put in the disc and tried to deselect all items it would not work.  I could not select nor deselect, only fully install the suite all over again (which I have done 3 times).  Is there some trick to selecting or deselecting?
    Is there anyone with a solution to the library problem or should I try to get Adobe to send me another disc?
    Something strange when installing, I only used application disc 1 & 2, but have application discs 3 & 4 that are not used and seem to not have any exe files or usable files, a content disc that seems to have only a read me pdf file and a learning disc that directs me to websites.
    Any help would be great.
    Nancy

  • Remove a Library File

    Dear All,
    How can I remove a symbol from the library of an associated
    flay file
    without touching it in the Library. Every time I do this it
    crashes the IDE.
    The selected Library File may not be on the Flash document.
    The Select
    Unused Items also crashes the IDE.
    Is there a way to recreate the Library File missing certain
    Files?
    Thanks again.
    Alastair MacFarlane

    I found the solution :
    In fact very simple !!!
    Just select "books" on the top part of  Itune's screen left column.
    Hilight the Pdf or book you want to remove.
    Use right click to use delete option and follow the process indicated.
    Jean.

  • IMac 20-inch on OSX 10.7.4 running iphoto 11, my photos from my iphoto library have been deleted. I have time machine but the iphoto library file is missing when I access time machine, help please.

    I have an imac 20-inch Late 2006 model on OSX 10.7.4 running iphoto 11, somehow the application ccleaner has deleted my photos from my iphoto library. I have time machine but the iphoto library file is missing when I access time machine.
    To restore photos I have followed the steps below
    Quit iPhoto.
    Connect your Time Machine drive.
    In the Finder, open the folder containing your iPhoto Library. Unless you've moved your iPhoto Library, it can be found in Home/Pictures/iPhoto Library.
    Enter Time Machine.  (Time Machine can be found in the Dock or in the /Applications folder.)
    Choose your desired backup. The timeline on the right side of the screen displays a purple tick mark for each of the backups stored on your Time Machine drive.
    Select the iPhoto library you would like to restore, and click the Restore button.
    I dont get the option in step 6 as I dont have an iphoto library file to choose? Does anyone know why?

    Hi Barry
    Thanks but as mentioned all is intact, even at step 3 I can see the current library in Home/Pictures/iPhoto Library which has no photos, but when I access time machine any point before the NOW option the iphoto library in Home/Pictures/iPhoto Library is missing from the finder window. 
    As you can see here it is
    and now its gone. I have no explanantion.
    How do I go about moving this question as you suggested.

  • Some library files are missing

    Hi All,
    i successfully installed 11.1.0.7.0 on one of my VM . o/s version is redhat linux 5.6 . when i checked in my oracle_home/bin directory ,some library files are missing (like probcocob32, 32bit libs oracle components) . so can anyone help me how to installed this particular compenents. i didnot use GUI. I Used silent installaion.

    Does iTunes still play the tracks that haven't been consolidated or do they now have broken links? If the links are broken are the tracks still, in fact, in their original locations?
    tt2

  • Files missing from library after archive and install

    Hi forum folk
    any help you could give would be much appreciated.
    I can't seem to verify my permissions on HD. I have run disk utility both from finder and from my OSX startup disk and consistently get the error message "Disk Utility has lost its connection with the Disk Management Tool and cannot continue." I then reinstalled the operating system all together making sure to archive and install as well as archive previous network and preference settings. This means I am running 10.3.4 at the moment (and I can't verify any of the software updates at the moment). After reinstalling I still cannot verify my permissions, so now I am trying to back up all my files so that I can reinstall the OSX again, erase everything, and start from scratch. But I'm running into some very strange problems while doing this. select files are missing from ~/library. there is no Safari file, for example. I tried looking in HD/previous systems/library where my library files were saved before I reinstalled the operating system but there is no such folder in there either. this means all of my bookmarks are gone. additionally, under library/preferences (in both the old and new library folders) there is no file named com.apple.itunes.plst. so all of my itunes playlists are gone as well. these are the only missing files I have found thus far and i can't explain why they selectively would not have been saved after the archive and install. Everything else seems to be intact. Any ideas?
    thanks
    jb
    powerbookG4   Mac OS X (10.3.9)   running 10.3.4 at the moment - can't verify permissions on 10.3.9

    jbeep:
    my HD has a capacity of 8.85 GB available. When I reinstalled panther I had little more than 3 GB available (I deleted a bunch of unneeded things since then)
    Thanks for this update. What is the total formatted capacity of your HDD? I ask because I suspected that you might be cutting it pretty close. The rule of thumb is that you should have 10-15% of your total capacity available as free space. My personal rule is 15%-20%. This allows for more efficient perfomrance of OS X.
    I am in the process of backing up everything on my seagate combo USB 2.0/firewire 200 GB external (I am using the firewire cord)
    Having an up-to-date backup is one of the primary rules, often observed more in the breach than not. Since you have an HDD that supports Firewire, I suggest that you make a bootable clone of your entire HDD using SuperDuper. You can then use this backup as an emergency boot drive. However, it must be Firewire, as PPC Macs don't boot from USB devices.
    I also have heard that it is advisable to reinstall the OS "every now and again" and I hadn't done this for at least two years. was I ill-advised?
    Most experienced Mac users never re-install, except under dire circumstances. Since installing my new HDD in this computer I have never re-installed. Re-installation is the utlimate intrusive measure, and it exposes one to all kinds of issues, from lost data, to flawed installaton, to installations that fail midstream. Re-installation is not an effective maintenace procedure. Here are some helpful links in terms of maintenance:
    Mac OS X 10.3/10.4: System maintenance
    Macintosh OS X Routine Maintenance
    Maintaining OS X.
    I'm going to restart now and try and verify my permissions again using the procedure on the above link. I'll let you know what happens.
    Instead of verifying permissions, just go ahead and Repair Disk Permissions. Verifying permissions does nothing, and wastes your time, as it is difficult to tell whether you need to repair, and you have to repair anyway.
    Do post back with an update of your progress and any further questions or comments.
    Good luck.
    cornelius
    Message was edited by: cornelius

  • .xml file and iTunes library files are missing from the music folder

    I recently made a second itunes library on my external hd, today when I open itunes and choose this library, the .xml file and itunes music file are invisible or translucent, therefore I can't open my library. But when I go to my music folder they are missing. Another odd thing is that all my music is still in the folder. Is there a way to re-open my library w/o re-importing all my music? Can I some how get a new itunes library file?
      Mac OS X (10.4.10)  

    This is not an answer but I have the same problem. From time to time I clone my music drive to an external drive for back up. When I do, I burn a copy of the album artwork folder, iTunes Music folder, iTunes Library.itl, iTunes Music Libraru.xml, and iTunes Library file to CDRW. This is so I can copy them into the music folder in my user home drive of my laptop then hook up the external and have access my library. Trouble is the .xml file and iTunes library files don't always show up when I go to the iTunes folder in my Music folder. There either is a blank where they should be or the names appear with no icon and when I click to select, that dissappers too. I thought I had a solve by exiting iTunes and letting it save everything. It seems to bring the .xml file back but not the itunes Library file. Any thoughts?

  • ITunes Library file gone missing

    Hi there,
    This is my first post
    Anyway on more upsetting words, my iTunes library has gone walkies!
    I have an iPhone 5 and an iPod Classic 160gb.
    So that means i have 2 different libraries.
    So ive had to change which library iTunes brings up whenever i use one or the other.
    However today i went as normal to change from my iPhone library to my iPod and the library file seems to have dissapeared!
    And im really stressing out . Look at the pictures and tell me if theres anything unusual.
    Please help me!!!

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied & renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
    If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
    tt2

  • HT3819 My iMac had a corrupt seagate HD that had to be replaced my imovie files & itunes video library are missing when I picked up my Mac from Apple?

    I purchased my 27" iMac in October 2010 after attending classes we discovered my computer needed new graphics card, hard drive, and a total rebuild after owning it only 6 months. Apple rebuilt my new computer, several months later same issues began yet again, slowly Apple began replacing defective parts they installed, my computer still hasn't worked as it should and has been in and out of Apple all the time sometimes they keep it for weeks! running tests?? February 10, 2013 I took my imac back in because it has been taking upwards of 6 minutes to make 1 single edit in imovie after 6 days of editing my project I could No Longer save in itunes, external HD, or export my imovie videos (they are 4 min up to 20 min max) Apple informed me that my Hard Drive was corrupt a bad batch of Seagate HD had been installed and my computer was again affected by this and it needed to be replaced and they couldn't get it to respond at all my itunes library was missing, etc. We saved my videos on my external HD I brought in with me. The Genius bar said they would call me in 3-5 days for me to pick up my computer. 9 Days later not hearing back from them I went in to get an update February 19, 2013 No one can tell me what was done except my HD was replaced they can't answer my questions about my itunes library being reinstated or my videos, music is missing, podcasts, etc. I was even using icloud, empty? They tell me IF I find anything wrong or not working again to just bring it back.  My iMovie videos ALL the edits are missing ? I can't find ANY of my videos in my itunes my Library is empty as it is in imovie except for 2 videos? HELP! I can't imagine having to re-edit my entire video with sound effects, fronts, graphics, etc. I spent weeks on this :-( I'm at my wits end with my iMac.... I have searched in my previous itunes library EMPTY ! Waaaah! I want my mommy....

    The Apple Store is not responsible for data loss and generally does not do any backups of your data before performing any repairs, though in some cases, as seems to be the case in yours, they guide you to making your own backup. Here's what they say on the "getting service page" (when I've taken a system in for service a similar statement was presented to me when I agreed to the service):
    Many repairs require Apple to replace or reformat the hard disk, which will result in the loss of your data. Please make sure you back up your data on a regular basis to minimize your data loss. Learn more about backup options. Apple and Apple Authorized Service Providers are not responsible for any damage to or loss of any applications, data, or other information stored on your Mac desktop while performing service.
    Since you say that you backed up your videos before the drive was replaced, why can you not just restore them? And did you not back up anything else?
    If you didn't make any sort of backup of your other data prior to taking the iMac in for service, then sorry but your data is almost certainly gone. Regular reliable backups are a must, particularly when dealing with content you spend a lot of time creating. You may be able to re-download any content you purchased from the iTunes Store or Mac App Store, but anything else you'll have to recreate or re-obtain from the original source.
    Regards.
    Message was edited by: varjak paw

  • Once again - upgrading iTunes - reports library file damaged, all missing

    So, I've finally figured it out. When ever I upgrade iTunes, the new version doesn't like the old library file and marks it as damaged.
    All content is lost - as far as itunes is concerned. But it's right there on the hard drive. In the itunes folder.
    Making a new library file and point the preferences to the content still results in nothing showing up.
    No, I have not sync'd since this happened. I have many files in the itunes folders on my HD where the content is not loaded on my itv4.
    Is there a magic key combo to have it 'look' at the actual HD contents in the itunes folded and 'find' it ?
    No, holding down SHIFT when launching itunes and then creating a new file is not the solution, nor selecting the old library file (says it's damaged).

    For general library squiffiness following an upgrade the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
    *Empty/corrupt library after upgrade/crash*
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the *Previous iTunes Libraries* folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename *iTunes Library.itl* as *iTunes Library (Corrupt).itl* and then rename the restored file as *iTunes Library*. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch (Windows) or Music Folder Files Not Added (Mac) and Super Remove Dead Tracks (Mac) for tools to catch up with any changes since the backup file was created.
    When you get it all working *make a backup!*
    tt2

  • Restoring itunes library using .tmp file (missing .itl)

    My external hardrive that contains my itunes library accidentally got unplugged and when I reopened up itunes, my library disappeared. I went to my Itunes folder and everything seems to be there except my itunes.itl folder. I've read that i can potentially recover my library by renaming the correct Temp.tmp file(which I have 13 of) to itunes.itl. The problem is every time I try renaming it and error occurs. Any help would be much appreciated!      

    Hi,
    Look for a previous library file
    Rename latest version to iTunes Library.itl and move it to where the original file should be.
    Jim

  • Encore CS3 missing Library Files

    I have installed Encore CS3 and also purchased the Adobe Master CS3 DVD 30 day try out. On three different PCs. Running Windows Pro, tried different user types, MSconfig to turn off program when installing, you name it.... When I run Encore and look for any Library file nothing is there.. just a General Tab and no files. I called Adobe after 45 minutes, 5 different contact people I was told to do a reinstall (duh!).. I did that same problem.
    Can anyone tell me how to get Encore CS3 to install the Library content files or where to locate these to install.
    Thanks
    DP

    Neither does the full version. I purchased the full version this week and NO LIBRARIES
    I upgraded (at least I thought I was upgrading) Premiere and Encore this week. I am close to asking for a refund since I have had nothing but issues with both.
    My problem right now is the libraries for Encore CS3. You know the templates for menus and buttons etc. Some people call that content but the useless people in India call the manuals content so I am trying to be clearer.
    I bought the downloaded version so please do not tell me they are on disk #3. I download 5 files and installed them. Some of them I re-downloaded and I installed twice. They are.
    - ADBEPPROCS3_ALP.exe (Premiere Pro CS3)
    - ADBEAENCC3_ALP.exe (Encore CS3)
    - PPROCS3_Cont_ALP.EXE (Premiere Pro Content/manuals)
    - AENCCS3_Cont_ALP.exe (Content/manual installer for Encore CS3 manual)
    - AENCCS3_Cont_ALP.7z (3 gig file of foreign language manuals)
    I am running on an HP M8040N with Vista Ultimate (32) I of course search the Adobe site and Google and I have seen other people with the same problem. After spending 1 hour with "Tech Support" in India I was told I needed to call Adobe Tech Support Monday thru...you get the idea.
    WHAT AM I LOOKING FOR...the pre made Templates, Menus, Buttons, etc. that came with the disk version of Encore.
    Can anyone help or am I effed for the week-end and most likely beyond?

  • Copy iTunes Library but missing ITL file

    I am trying to copy my iTunes library to a new computer. The problem I am having is that there is no itl or xml files in my itunes library on th eold computer (yes iTunes still works on the old computer). I have updated both versions to the latest ver of iTunes. I thought this would be an easy process of just copying the iTunes folder and then Choosing the library that I copied over. Since the old computer is still working, is there a way I can recreate the itl file or any other suggestions? I could just copy all my music over again into the new computer but I spent hours selecting indiv songs to sync to my ipod therefore don't want to loose that info. Thanks.

    Here is the typical layout of the iTunes folders.
    Your *00 iTunes* folder contains both *iTunes Music* suggesting that it coresponds to the main iTunes folder, but also contains Podcasts, Music etc. which would make it map to the *iTunes Music* folder.
    The "parent" of any folder is simply the one that contains it... As I see it the highest level folder that encloses all the media is the root level of the drive, therefore you need to move the library files * album artwork folder there, then try opeing iTunes again. Assuming the library works on the old computer you can then copy the library files & album artwork folder to the new machine and test it there.
    If that all works it should be possible to normalise your library so that managing it is less confusing in future.
    1. Create an new folder in the root of the drive called iTunes.
    2. Move gthe library files, album artwork folder and *00 iTunes* folder into the iTunes folder.
    3. Shift-start iTunes, open \iTunes\iTunes Library.itl & test
    4. If all goes well close iTunes, rename *00 iTunes* as *iTunes Media*, start iTunes & test.
    5. Confirm in preferences that the iTunes Media folder is now given as \iTunes\iTunes Media
    6. If all has gone well so far Consolidate the library to rearrange music in the proper layout.
    7. If you have ever let Windows Media Player get your hands on your music then the folders may be littered with various album art and desktop.ini files. When iTunes reshuffles it leaves these behind. I've written a script to tidy these up which you can get from http://www.samsoft.org.uk/iTunes/cleandeadart.asp if you're interested.
    tt2

Maybe you are looking for

  • Watermark Script - not embedding font

    Im using the addwatermarkastext feature to place the current date on the bottom of a file. Have noticed that this font is not embedded. If I use the Acrobat Document Add Watermark feature it embeds the font. How do I get my script to embed this font

  • Removing pages

    How do I remove the first page from a PDF document?

  • Creating PDFs for Newspaper Ads?

    I'm using InDesign CS5 to create several ads that will be printed in black and white in my client's local newspaper. Each ad includes a grayscale photo. Per the newspaper's instructions, I've done all of my color correction in Photoshop and I'm using

  • System status CLSD and INCM

    Hi, I'm trying to make a GR/SE for a PO. The system then give me three messages: - System status CLSD is active (ORD xxxxxxx) - No approval workflow found. Inform system administrator - System status INCM is active (confirmation xxxx) The INCM messag

  • Slow motion from 1080i60 to 23.98 PsF

    I am currently editing a serie wich is shot in HDCAM 23.98 PsF. I have received tapes yesterday that were shot in 1080i60. The production shot in this format for slow motion purpose but im wondering what is the best way to achieve the best result. I