Library in Report painter

Dear All,
   Can any one tell me what exatly determines the library in report painter otherthan pre-defined coloumns and Rows, and i still have a confusion in choosing library, Pls throw some light to eliminate confusion..
Regards,
Suresh Patipati.

Hi
Library determines the following in report painter report:
Table that can be used in the report
Charaterstics that can be used in the report
Key Figures that can be used in the report
Basic Key Figures that can be used in the report
Regards
Sandesh.

Similar Messages

  • Attaching Variable to the Library for Report Painter for Cost center report

    Hi,
    I want to attach the Variable - "Cost element group" to the Library for Report Painter for getting Cost center report. The Cost center report should be cost element group wise with actaul, budget and variance. Please let me know the process.

    hi..
      I think you have to first define Attribute mis as "V" in Cost element master basic data tab for the elements you want to capture as varible.
      Then make a Cost element group / set in KAH1/GS01 and use it in your report.
      kkumar

  • Add in Library for Report Painter/Writer 9PCC

    Hi SAP,
    I need to include in Library for Report Painter/Writer the component 9A2 CO-OM-IS-BP Business processes: Special reports because I need to run 9PCC, but 9PCC don't exist in my system.
    Would I like know if it exist the SAP note include in Library?
    Best regards,
    Edited by: Fabio Gil on Jul 1, 2010 6:35 PM

    Hi,
    You can create a library via GR21 transaction. What tables do you want to join? Depending on this, one can tell whether it's possible or not.
    You can search for available info on the forum; similar questions were already asked.
    Regards,
    Eli

  • A issue about library of report painter?

    why can't i put table vbap into a library?
    It informs that "The Report Writer can only report on tables if the attributes of these tables that are relevant for reporting are defined in control tables. This is not the case for table VBAP." and Message no is GR493.

    Any body here can help me? thanx!

  • Add Period library 8A Report Painter

    I need to add 13 to 16 periods for the library 8A (EC-PCA) but only allows me to add the periods of 1 to 12. this change is possible?
    Regards,
    Ricardo.

    hi,
    first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
    FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
    Pls Suggest

  • New Library for Report Painter/Writer

    I need a library that includes 2 tables.  I know that somehow it is possible, but it is quite technical while very few people know how to do it.
    Does anybody can guide me through the process?

    Hi,
    You can create a library via GR21 transaction. What tables do you want to join? Depending on this, one can tell whether it's possible or not.
    You can search for available info on the forum; similar questions were already asked.
    Regards,
    Eli

  • Creation of Library and Report in Report Painter with Z tables.

    HI,
    When I am creating library in report painter with Z table it is giving the following error message 'Table ZCO_SEMI_FIN_VAL is not installed in Report Writer'.
    Can u help me how u install Z table in report painter and create the characteristic and key figure of the Z table in the library.
    Regards,
    Partha B

    Hi Partha Pratim Bhar,
    In order to bring / enable a Z table for you to build a library, you will have to set it at transaction GRCT.
    Here you need to configure - table (Z table) , characteristics and Key figures.
    You can refer any other tables by SAP in GRCT for reference.
    Revert if you require additional help.
    Regards,
    Subin John

  • Attachin Custom Table to Report Painter Library

    Hi,
    Im trying to create a new library in Report Painter (GR21) and attach it to a custom table.
    I am getting the error message (GR493)  that "the table is not installed in Report Writer - The Report Writer can only report on tables if the attributes of these tables that are relevant for reporting are defined in control tables"
    Does anyone know what this means and how to get around it?
    Thanks.

    Hi,
    You need to add the table as a report table in transaction GRCT "Report writer control tables".
    Hope it helps!
    Regards Rene

  • Report painter- problem in creating formula variable- ps

    Hi Experts,
      i have copied report  6P3 - 6PP1-001 Act/Com/Total/Plan    from library in report painter.
    our requirement is we want two user fields from cj20n  in this report. they are prps-usr04
    and prps-usr05.
    i have added these in header as  special text variable as they were ALREADY available at header under
    MASTER DATA FOR PROJECTS / WBS ELEMENT IN REPORT-WRITER. 
    now my requirement is to add new columns. for that i required these two fields in formula.
    but as they are not present in formula component  i am not able to get it.
    what should i do to enter these fields in component list in formula?
    PLEASE GUIDE ME?
    AMOL

    ActRunningBal is a running total calculated in crystal or database field? If it is a database field then you can try this
    if {command.CR-Amount} <>0 then
    {command.CR-Amount}
    else
    previuous()+previous({command.Dr-Amount})
    If it is a running total you cannot apply previous function on it.
    Regards,
    Raghavendra

  • Report Painter: FAGLFLEXT, profit-center authorization not checked

    Hi colleagues,
    I am using a Z*-library in report painter based on FAGLFLEXT.
    When a report beads on this library is executed, there is no authorization check for profit-center (profit-center groups,…). Wether auth. Object K_PCA is checked nor an entry in RESPAREA.
    When I execute a report from FGI3 transaction (also based on FAGLFLEXT) I can see that RESPAREA is checked with PCxxxxyyyy (xxxx = comp. code, yyyy is profit-center).
    I thought that, based on the information in the IMG node “activate authorization check for profit centers” which appears if FIN_GL_CI_1 is active, that PC authorization check for reporting is ALWAYS working and I guess, in the mentioned system the authorization check was working before the last support package upgrade.
    The important text from the SAP IMG node “activate authorization check for profit centers”: “The profit center display authorization for reporting is not affected by this setting. The system always checks this authorization, be it in drilldown reporting or the Report Painter / Report Writer reports.”
    The system is ECC60 on SAPKH60023, so FIN_GL_CI_1 is not available, but I believe, the auth. check for profit-center in report painter reports should work fine without this.
    Does anybody know if in ECC60 with a report painter library using FAGLFLEXT the profit-center authorization is checked, which auth. object is checked,...?
    Best regards, Christian

    Hi,
    Please check if the below note helps.
    1960689 - Reverting authority check from "E63_AUTHORITY_CHECK" to "E14_AUTHORITY_CHECK" or use both
    Thanks

  • Report Painter - Download Capabilities

    Greetings - Does anyone have any experience in downloading reports in bulk from Report Painter?  The scenario is that we want to create a new CO report, Plan vs. Actual by cost center in a different format then SAP standard.  We then want to be able to run the report for all cost centers and then have each one downloaded at the same time individually so we can then send them out to each Manager of the individual cost center.
    If anyone has any insights to this, that would be great.
    Thanks,
    Jim

    http://www.sap-img.com/sap-fi.htm
    <b>Report Painter</b>
    Report Painter, How to reverse +/- signs
    Library for Report Painter/Writer
    Rept Painter, changing the tables assigned to libraries
    Report Painter, Relationship with Rept Grps & Repts
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Maximum size to reference text fields in report painter

    I have created a library for report painter but reference text fields were not transfered because of their size exceed 24 character long. is there some SAP procedure to extend this size at the moment we are creating the library?  Thanks in advance for support me.

    Hi Francisco
    Firstable I created a structure evaluation using SAP TC MCS7 and took the own customized table that was set up for SPL porpuses. this table contains several fields including text fields and now we would like to take them for set up several report painter but I noticed that this kind of fields are not available when I created the library using GR21 also when I tried to create the set using GS01 appeared a error "this field is bigger than 24 characters" or something like that.
    SGTXT              Text Field                      50
    ZZBKTXT          Text Head Reference      25
    ZZKIDNO          Payment Reference        30
    Thanks in advance to take time for my research.
    Regards

  • Library Tables in Report Painter ?

    Hello,
    can we use two tables while creating a library for the report painter ?  mmy guess is on using a view ??
    If views, then how to use them in the libray while defining the characteristics n all ??
    Hope i am comprehendable ..
    Thanks.
    Shehryar

    Hi ,
    i seen the same issue in sapgenie.com , just have a look .
    as per my knowledge u can use Views in report painter.
    regards
    Prabhu

  • Creating a new report painter library

    Hi all
    I have created a z table for the verification of FI-CO values to use with report painter. This table is modeled like the GLT0, the only difference is that my program fill it with the values of secondary cost elements (for production direct costs). So in the table I have records of accounts defined in chart of account and records with only CO elements. I have created the library using GLT0 as template and created the user exit for take the definition of cost elements and FI account in the same process. All work well the only problem is that for the cost element the values aren't displayed also if present in the table.
    I supposed in some point the extraction of values is linked to a control of presence of account in FI (SKA1 or SKB1), but I don't find the point.
    Someone has some ideas?Thanks
    Davide

    First, you don't so much want to back up the library, you want to archive the unwanted items.  When archiving you should archive to two separate drives because there could come the day when you plug in the single archive copy and the drive doesn't start.
    Why not just archive a copy of the library as it is now, then delete the items from the library on the computer?  Don't bother making a new, blank library.

  • Error in the Report Painter standard reports delivered by SAP library 1VK

    Hi,
    The Report Painter standard reports delivered by SAP contain the following errors, after the upgrade from 4.6C to ECC 6.0,in the report 1LMA-001 (library 1VK, report group 1LMA), actual for activity types
    are missing.
    I already copy from client 000 and generated, but still missing the actual for the activity types.
    Thanks in advanced for you support,
    Susana

    Hi,
    Firts of all thanks for you answer.
    Process flow:
    1. production order confirmation CO11N
    2. after production confirmation if we check the in order CO03 cost/analysis, the actual for the activity is there.
    3. afterwards with we execute report S_ALR_87013646, the actual for the activity type is missing.
    Report group 1LMA-001 library 1VK. 
    I already did:
    1. GR59
    2. Report RGRJBG00
    3. OKB6
    Regards,
    Susana

Maybe you are looking for