Library instruments not found in Logic Express 9

Hi, some of the instruments listed in the library in Logic Express 9 can not be found.
See e.g.:
This happens also to other instruments from the library although these were all installed with the Logic Express software.
Can you help please?
Thanks a lot,
Niels.

this will helpmate http://logicprostudio.blogspot.com

Similar Messages

Instrument not found

Hi
I have a project which I have just moved from an external hard drive into my laptop. I saved it as a new project but copied all the audio and samples folders from the original folder.
Now when I load the project it says 'instrument not found' for all the EXSp24 instruments, even though they are all copied in my EXS library, and in the sample instrument folder of the song.
It only loads the song properly if I leave the old external hard drive plugged in, which I don't want to do. How can I tell Logic to look elsewhere for these instruments?
Thankyou!
Hx

I have a similar problem, after I repaired the directory of a disk that contained all my user EXS sample libraries now Logic Pro 7 doesn't see the sampler instruments. Even though the sample instruments are in the right folder and the EXS samples were in the same place. When I refresh the menu in an EXS instance loaded it still can't find them.
Help!

Your photo library was not found. Do you want to find your iPhoto Library?

Your photo library was not found. Do you want to find your iPhoto Library?
Do you want to create or find?
This is the message I get when I try to open iphoto.
1. this is the first time since I've used iphoto that this has happened.
2. I would like to know why.
3. I am not sure which choice to make.
4. recent changes involving photos would be deleting several photos....I used a program called Grand Perspective and began to delete photos from there
5. although I'm interested in fixing this problem, I would like to learn more about 'libraries' and the way iphoto works. Previous to owning a Mac, I used Picasa with my pc and I don't remember it using as much space on my hard drive. iphoto has a large number of duplicated photos of which I've been unable to resolve easily and it is approx. 60 G of space. I would like to have access to my images (30,000) through external hard drives but not necessarily have them all on my mac. I believe that is what Picasa does. I'm using the new Picasa for Mac but want to continue to use iphoto as well.
If I did not form this question well enough, please let me know how to clarify. I'm trying to remedy this while answering a million Why? why? Why? questions from my 4 year old!
Thank you.
iphoto 7.1.5

I would like to learn more about 'libraries'
Step one is to learn about iPhoto - it is not a photo viewer like Picasa - it is a photo manager and uses an SQL database - the content and structure of this database are critical (as with any database application) to the operation of iPhoto - any changes made to either the content or structure of the database using external programs including (especially) the finder can corrupt the database and cause you to lose data
recent changes involving photos would be deleting several photos....I used a program called Grand Perspective and began to delete photos from there
This is how you destroyed your iPhoto library and made it unusable
As to space - the iPhoto database contains at a minimum a copy of the original photo (in the default and recommended operating environment) and a small thumbnail. When any modification to the photo is made a modified version is created so there might be three versions (no duplicates) of a photo within the iPhoto library - none of them are extraneous and none of them can be removed without corrupting the iPhoto library
Once a photo is imported into iPhoto (assuming default settings which are strongly recommended) the original source photo outside of iPhoto can be archived, deleted or otherwise handles - iPhoto has no further need for it.
The iPhoto library can be located on an external hard drive so long as that hard drive is always available when iPhoto is running
In general it is not advised to run two different photo organizers against the same photos - so if you use both Picasa and iPhoto you are likely to create future problems (although Google claims it is possible - just remember that you can not successfully make any change of any sort to any photo with the iPhoto library using Picasa or any other program - if you only use Picasa to look at photos you may be ok - if you never make any mistakes
As to your immediate problem - you have destroyed you iPhoto library by deleting files from it. If you want to use iPhoto you will have to start over - find the originals folder within the iPhoto library and launch iPhoto while depressing the option (alt) key and create a new library - import the photos from the originals folder into iPhoto and do not go inside the iPhoto library or modify the contents of the iPhoto library in the future.
LN
Message was edited by: LarryHN

Obant reports ORABPEL-00005 (collaxa library directory not found)

Hi,
I´m trying to deploy some tasks using obant and several build.xml´s. I´ve done this for dozen times now, but today I got an error message that says:
build.xml:42: ORABPEL-00005
Collaxa-Library-Verzeichnis nicht gefunden.
Das angegebene BPM-Library-Verzeichnis "lib/" wurde nicht gefunden.
Here a maybe-translation:
build.xml:42: ORABPEL-00005
Collaxa-Library-Directory not found
The indicated BPM-Library-Directory "lib/" was not found
Well, the funny thing is, that when I´m running "obant" from command-line everything works fine - but when I´m calling the it from another ant-script it fails. The corresponding line in build.xml points to the bpelc-task:
<target name="main">
<bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
</target>
I´ve inserted an <echo ... /> to get the values of those variables (basedir/rev/deploy) used and everything seems to be in order. Here´s how I call this build.xml.
main/build.xml:
     <target name="deployBPELServices">
          <property name="deploy" id="deploy" value="testDomain"/>
          <ant dir="services/all" antfile="build.xml" target="all">
               <reference refid="deploy"/>
          </ant>
     </target>
main/services/all/build.xml:
<property name="deploy" id="deploy" value="default"/>
<property name="rev" value="1.0"/>
     <target name="BpelProcess1">
          <ant dir="${basedir}/../BpelProcess1/"/>
     </target>
<target name="all" depends="BpelProcess1"/>
main/services/BpelProcess1/build.xml:
<target name="main">
<bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
</target>
Usualy I start the deployment by using "obant deployBPELServices", which fails. When I´m using "obant" directly from main/services/all it works flawless.
Any ideas or suggestions?
Thnx in advance,
Max

Hi Clemens,
Yes, the sample´s build.xml were my reference on how to set up this whole thing. I did it this the very same procedure for the last year with 26 BPEL-processes and yesterday just added a new process and this happend. Nevertheless, also if I remove the changes made to the main build.xml it doesn´t work (tested on 2 systems). Well at least, obviously this is my fault, not BPEL´s :) Whatever, I succeeed with the following:
Instead of using
<target name="deployBPELServices">
<property name="deploy" id="deploy" value="testDomain"/>
<ant dir="services/all" antfile="build.xml" target="all">
<reference refid="deploy"/>
</ant>
</target>
I´m now doing it this way:
<target name="deployBPELServices">
<property name="deploy" id="deploy" value="testDomain"/>
<exec dir="services/all" executable="cmd">
<arg line="/c ${ORABPEL}/bin/obant.bat -Ddeploy=${deploy}"/>
</exec>
</target>
${ORABPEL} points to my BPEL installation.
Thnx anyway :)
Greetings,
Max

I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?

I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
Where do I find this library?
thanks
Shak

Twas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
(1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
If that doesn't work
(2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
This may take a while. Once completed, re-open iPhoto.
And that should (I stress should) cure it.
Good luck.

Iphoto is not responding. I get the message, "Your photo library was not found. Do you want to find your iPhoto Library?

IPhoto is not responding except with the message: " Your photo library was not found. Do you want to find your iPhoto Library". Then, "iPhoto can't continue without a photo library. Make sure the disk containing your iPhoto Library is connected.
1. What disk are they talking about?
2. I can access my photos by clicking on ALL IMAGES in SEARCH FOR.
3. If I trash iphoto and re-install from my Install Disc 1, will I lose the photos?
4. If so, what can I do to save my photos and get iPhoto working?
I have an iMac with 10.6.8.
Dave

What version of iPhoto?
Is there an iPhoto Library in your Pictures folder?

Ld: fatal: library -lthread: not found

My project is a multithreaded application that requires compiling c++
programs using orbix, roguewave libraries with some additional static
libraries we developed. However, during linking. I am getting fatal
errors:
ld: fatal: library -lthread: not found
ld: fatal: File processing errors. No output written to a.out
*** Error code 1
I am using Makefiles to compile my programs. To compile, using Sun
Workshop C++ 5.0 compiler, I am using a number of flags like this:
CC -c �.. -mt -DREENTRANT -I(header files -orbix, rw, my headers�)
-Bstatic �..-Bdynamic�.. xx.cpp -o xx.o
And to link, its
CC -mt -DREENTRANT -Bdynamic (orbix, rw, Pthread libs) -Bstatic
(My_libs.a) -Bstatic (My_objects)-o xx.exe
This could be due to some kind of conflict between the dynamic and
static parts - but I have no clue. Could you suggest how I could solve this problem? How would you explain this?
Thanks,
-Jacob

/* Please look at the following simple program */
#include <iostream>
#include <fstream>
#include "netdb.h"
using namespace std;
int
main()
     fstream s;
     cout << "Hello World" << endl;
     cout << __lock;
     cout << __unlock;
     struct servent* se;
     se = getservbyname("control_test", "tcp");
Compiling the above code with one of the following sequences of commands
          # CC -c -g -mt main.cc ; CC -mt -lsocket main.o
     or     # CC -c -g -O0 -mt main.cc ; CC -xnolib -mt -lsocket main.o -lCstd -lCrun -lm -lw -lcx -lc -lthread
on a Solaris 7, gives me an executable which stale locks immediately
in the beginning of execution, when the fstream object is created.
I first observed this error in a more complex and really multithreaded
programm where the fstream object was created dynamically in one
subthread.
I'm short before deciding to drop using the fstream and work out
the project with the old stream interface. Please note that I'm using
ISO ANSI representation of streams in this code that means it
is a std::basic_fstream<char ... > which locks the __stream_mutex
inherited by ios_base. The executable breaks exactly at the
beginning of the basic_ios::init function as described in
/opt/SUNWspro/SC5.0/include/ios.cc
I hope that someone previously encountered and probably solved this
problem (not worked around please).
CU AXEL

Library -lc: not found when compiling ncurses 5.7 in solaris 10

Hi,
I'm using Solaris 10 x86_64 and I am having problems compiling ncurses 5.7. This is the error message when I try to execute make:
gcc ../objects/tic.o ../objects/dump_entry.o -I../progs -I../../progs -DHAVE_CONFIG_H -I../../progs/../include -I. -I../include -D__EXTENSIONS__ -D_FILE_OFFSET_BITS=64 -DNDEBUG -I/usr/local/include/ncurses -O2 --param max-inline-insns-single=1200 -static -L../lib -lncurses -L../lib -lncurses -dynamic   -o tic
ld: fatal: library -lc: not found
ld: fatal: File processing errors. No output written to tic
collect2: ld returned 1 exit status
make[1]: *** [tic] Error 1
make[1]: Leaving directory `/Documents/ncurses-5.7/ncurses-5.7/objdir/progs'
make: *** [all] Error 2
I've read that this error happens because you cannot statically compile with the c library in Solaris and that this is not exactly an ncurses bug. I am quite new to Solaris and I do not understand this entirely? Can anyone help me fix this? And perhaps give some explanation as well?
Your help would be much appreciated.

I'm not familiar with all the variations here, but I suspect gcc may be erroring out saying that it doesn't have a static copy of libc, Correct, from the truss output:
7060:     open("/opt/local/lib/libc.a", O_RDONLY)          Err#2 ENOENT
7060:     open("/usr/sfw/lib/libc.a", O_RDONLY)          Err#2 ENOENT
7060:     open("../lib/libc.a", O_RDONLY)               Err#2 ENOENT
7060:     open("../lib/libc.a", O_RDONLY)               Err#2 ENOENT
7060:     open("/usr/sfw/lib/gcc/i386-pc-solaris2.11/3.4.3/libc.a", O_RDONLY) Err#2 ENOENT
7060:     open("/usr/sfw/lib/gcc/i386-pc-solaris2.11/3.4.3/../../../../i386-pc-solaris2.11/lib/libc.a", O_RDONLY) Err#2 ENOENT
7060:     open("/usr/sfw/lib/gcc/i386-pc-solaris2.11/3.4.3/../../../libc.a", O_RDONLY) Err#2 ENOENT
7060:     open("/usr/ccs/lib/libc.a", O_RDONLY)          Err#2 ENOENT
7060:     open("/lib/libc.a", O_RDONLY)               Err#2 ENOENT
7060:     open("/usr/lib/libc.a", O_RDONLY)          Err#2 ENOENT
7060:     open("/usr/sfw/lib/libc.a", O_RDONLY)          Err#2 ENOENT
# find / -name libc.a
There's also a possibility of problems with templates:
7058:     access("/usr/ccs/bin/ld.rpo", R_OK)          Err#2 ENOENT
7058:     access("P,/usr/ccs/lib:/lib:/usr/lib:/usr/sfw/lib.rpo", R_OK) Err#2 ENOENT
7058:     access("/usr/ccs/lib:/lib:/usr/lib:/usr/sfw/lib.rpo", R_OK) Err#2 ENOENT
7058:     access("tic.rpo", R_OK)                    Err#2 ENOENT
7058:     access("/usr/lib/crt1.rpo", R_OK)          Err#2 ENOENT
7058:     access("/usr/lib/crti.rpo", R_OK)          Err#2 ENOENT
7058:     access("/usr/lib/values-Xa.rpo", R_OK)          Err#2 ENOENT
7058:     access("/usr/sfw/lib/gcc/i386-pc-solaris2.11/3.4.3/crtbegin.rpo", R_OK) Err#2 ENOENT
7058:     access("../objects/tic.rpo", R_OK)          Err#2 ENOENT
7058:     access("../objects/dump_entry.rpo", R_OK)     Err#2 ENOENT
7058:     access("/usr/sfw/lib/gcc/i386-pc-solaris2.11/3.4.3/crtend.rpo", R_OK) Err#2 ENOENT
7058:     access("/usr/lib/crtn.rpo", R_OK)          Err#2 ENOENT
while Studio 12 may be falling back to dynamic linkages for libraries where it doesn't have a static copy.Studio 12
truss -f -o /tmp/out gmake
grep libc.a out
all show ENOENT
There shouldn't be a problem with having the application libraries static, but the OS libraries will not be.:-)
alan

Third party EXS-instruments not found in LP9 after downloading.

Hi.
I have downloaded some EXS-instruments that i found online for free. I stored them along with the original EXS-instruments that came with LP9. When i try to load them in LP I get a pop-up saying the instrument was not found. I have refreshed the library, restarted the mac without result. Why is this?
Thx, Elias

Read the Logic Studio Instruments manual available in the Help menu.
Specificially, the section on loading instruments. It spells out the storage locations. There's a main LIbrary on the Mac HD, and a user Library.
The factory instruments are in the main Library (similar to the path above but starting with the Mac HD vs user).
User instruments go into the user Library.

Please help... jam packs not working with logic express 8

my jam packs do not work. i go to the library tab, open one of the jam packs category, "Symphony Orchestra" for example. i choose an instrument folder ("strings" for example), and then an instrument. a window pops up and says "File not found... Result code = -43". What does this mean? What can i do to fix it?
You my also know that the jam packs work fine in Garage Band.

Hi,
on a UNIX based system, every file has it's own set of permissions who own it, who can read it or who can write to it. Sometimes, things get corrupted (often during an install or update, when administrator rights are used or not used....)
However: Open the Harddisk Utility in the Applications/Utilities Folder. Select your Harddisk and klick on "repair permissions". Wait for some minutes (takes some time).
You should do this not only now, but before and after every major update/change to your system.
The next step, if this doesn't work, would be to manually locate the files EXS24 is missing, but for this better ask someone in the Logic Pro forum.
Fox

Error -5093 "The analysis library was not found" in 64 bit project. But the analysis library is found in 32 bit project

Hello,
I'm using the Labwindows/CVI 2010 Full Development system, in a Windows 7 professional 64 bits computer. So, The analysis library is installed (see in the attached file), and the Option Analysis from the Customize library menu is selected.
I'm using several function from analysis library (WhiteNoise, MaxMin1D, LinFit, etc). The projects in 32 bits work very well. In 64 bits project there is not linkage error, the exe is created, but there are errors like that:
Function WhiteNoise: (return value == -5093 [0xffffffffffffec1b]). The analysis library DLL was not found or could not be loaded.
the same for the other analysis library functions.
how to do to use the analysis library in 64 bit projects, it's the analysis library 64 bit compatible?
thanks in advance
Solved!
Go to Solution.
Attachments:
AnalysisLibraryInstalled.jpg ‏220 KB

Hi DansatB,
thanks you for posting on this forum !!
Yes, the advanced analysis librairy is 64 bits compatible. i can do the test on my computer on CVI 2013.
i think it will be great to correctly uninstall your CVI version ans all install again.
Regards
Aurélien Corbin
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Cahiers de vacances de NI
Présentations en ligne : 12 fondamentaux à réviser, du 9 juillet au 29 aoû...

Select plug-ins and soft synths (not apple) in logic express

new to logic express.... trying to select my soft synths like arturia cs80 and native absynth. these show up in the audio units manager screen, but i don't know how to select these in a track.
please advise, any help is appreciated

In the Software Instrument channel strip, click-hold on an Input slot, then choose your instrument plugin from the menu.
Note: this works on Instrument tracks only, so make sure you have an instrument track (coz input menu for an audio track would look different and ask you to choose from available audio inputs).
Reading the Manual about basic operations in Logic may be also helpful.

Library File not found - bug?

Hi All,
I was trying to add a taskflow to the navigation , as find out that the resource library(initial context factory) for the task flow links , the one mentioned in the navigation registry is missing. -oracle.adf.rc.adapter.library.ResourceLibraryFactory.
tried creating a new webcenter portal application and got the same issue. I am using Jdeveloper Studio Edition Version 11.1.1.5.0 with web center extension 11.1.1.5.0.xx.
The taskflow link apperas in the navigation when we add it to the default navigation and whenever we accesss the the link in the navigation reference , it throws some exception and the task flow wont run. Please let me know , if this is the missing resource library that cause the task flow .
Any other pointers to add a taskflow (without pagefragments ) as a link to the navigation will be helpful.
Got a similiar issue in the same forum which is unanswered : Task Flows - ResourceLibraryFactor "not found"?
Thanks,
jzwl

JZWL wrote:
Hi Daniel.. thanks for the quick response,
I am using taskflows without page fragments, and it works fine when run independently and currently the permissions are set to anonymous users. Whenever I drag and drop an task flow to the default navigation , it allows to select the task flow definition xml , but while runing the page it gives some null pointer exceptions.
This same task flow run as a link in the navigation , when used as an external url link (redirect to url option inside the navigation options ).
Is there any way, the task flow can be a part of navigation without being external url or using page fragments. I couldn't see any documentation part says, it doesn't' support the Task Flows based on pages (jspx).
thanks,
jzwlHi again
I mark as bold some points.
1) I am using taskflows without page fragments,. Ok you are in bounded task flow JSPX pages.
2) permissions are set to anonymous users. You set permission in adf-config of your Fusion Web Application (ADF) or in adf-config of WebCenter Portal Application?.
3) I couldn't see any documentation part says, it doesn't' support the Task Flows based on pages (jspx). You can't put a Task Flow based on JSPX into another JSPX because are "full pages" and a page _only can cointain one af:document as root element. In addition, it is executed in a hidden project page called navigation-rendered.jspx
4) This same task flow run as a link in the navigation , when used as an external url link (redirect to url option inside the navigation options ). You are navigating to external Task Flow and not doing PPR/embebing in Page Template.
5) Is there any way, the task flow can be a part of navigation without being external url or using page fragments. Task Flows droped in navigation are rendered in a hidden JSPX page called navigation-rendered.jspx. You can see this page showing it in Project Properties. Your Task Flow finally will be a <af:region> that must be Page Fragments based. Transform your TaskFlow from JSPX to JSFF with right click and "convert to Task Flow with Page Fragments" when you are editing your Task Flow and regenerate ADF JAR Library.
I hope this help you.
Regards.

Does M-audios project mix I/O not function with Logic express 7.2 ?

I am having lots of problems getting this working, and it suddenly occurs to me that this equipment may not work with the Express version. Anyone know?

Scott,
You bring music to my ears. A few questions (I'm sold at this point, just want these questions answered for sugar coating, I guess):
1.) Does the Project Mix communicate effectively with Logic's 'MIDI Learn' feature? I tried utilizing this with M-Audio's Trigger Finger, but the Finger (or Logic, can't tell which) did not lock on to the assignment. Having any trouble with this?
2.) Are there memory banks and is it easy to save all settings at any given point to certain bank? Ideally I'd like to have a different memory bank for each song, so an extensive inventory of blank memory would be very useful.
3.) How's the LCD Screen? Really awesome or uncommunicative with the user (as in, do the abbreviations make it difficult to read, or is it fairly intuitive?)
Thanks a lot. And Stash, your words are tight, too.

Mobilepre audio interface not working with logic express 8

I have been using an M-AUDIO usb interface for garageband for the last year,i recently installed logic express 8 and i just can't get any sound whilst trying to record,logic displays a signal in the channel strip but no sound comes from my monitors,only when i plug the ear phones into the interface can i hear what i'm recording.I've tried every trouble shooting option in my apple pro training book like monitoring and audio preferences.I've contacted M-AUDIO but they just put me on hold as if there really busy!!!
in the end M-audio emailed me and blamed logic,they told me to contact apple,W@**ERS!!
I'm new to this apple discussions business and hope someone can help!!
ps the interface works fine with garageband
cheers c

callummccall wrote:
I have been using an M-AUDIO usb interface for garageband for the last year,i recently installed logic express 8 and i just can't get any sound whilst trying to record,logic displays a signal in the channel strip but no sound comes from my monitors,only when i plug the ear phones into the interface can i hear what i'm recording.
Welcome to the wonderful world of M-Audio!!! Now, what you are doing is perfectly NORMAL. You need to hook up speakers to your audio interface. Where the little diagram says so:
http://www.m-audio.com/layout/imgview.php?i=/images/en/connectivity/big/mobilepr eusbcd779px.gif
See? The reason this is so, is because when you are using this interface, you are BOTH using the inputs AND outputs. Logic always works like this, it is a requirement to use "a full-duplex sound card" which means a sound card that has inputs and outputs.
I've tried every trouble shooting option in my apple pro training book like monitoring and
audio preferences.I've contacted M-AUDIO but they just put me on hold as if there really busy!!!
in the end M-audio emailed me and blamed logic,they told me to contact apple,W@**ERS!!
I'm new to this apple discussions business and hope someone can help!!
ps the interface works fine with garageband
cheers c
M-audio blaming everyone else is not new, however, your "issue" is a user issue, not a gear issue.
Cheers

Library instruments not found in Logic Express 9

Similar Messages

Maybe you are looking for