Library issues after applying PSU 10.2.0.5

Hi everyone,
I have applied PSU 10.2.0.5 in the oracle 10.2.0.4 home.
Following is the output of opatch
[oracle@activision bin]$ opatch lsinventory
Invoking OPatch 10.2.0.4.9
Oracle Interim Patch Installer version 10.2.0.4.9
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : /u02
Central Inventory : /etc/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.4.9
OUI version : 10.2.0.5.0
OUI location : /u02/oui
Log file location : /u02/cfgtoollogs/opatch/opatch2012-05-21_11-49-38AM.log
Patch history file: /u02/cfgtoollogs/opatch/opatch_history.txt
Lsinventory Output file location : /u02/cfgtoollogs/opatch/lsinv/lsinventory2012-05-21_11-49-38AM.txt
Installed Top-level Products (3):
Oracle Database 10g 10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
Oracle Database 10g Release 2 Patch Set 4 10.2.0.5.0a
There are 3 products installed in this Oracle Home.
There are no Inteim patches installed in this Oracle Home.
whenever i issue sqlplus nothing is happing
i tried
[oracle@activision bin]$ sqlplus
[oracle@activision bin]$ which sqlplus
/u02/bin/sqlplus
*[oracle@activision bin]$ ldd $(which sqlplus)*
lddlibc4: cannot read header from `/u02/bin/sqlplus'
Please give me the info to solve the problem

Pl post OS details. Can you post the last 50 lines from the 10.2.0.5 patch log (to ensure that the patch applied successfully) ? Pl also post the output of command "env | sort" just before you issue the sqlplus command
HTH
Srini

Similar Messages

Issue after applying Cumulative update on SharePoint 2010 Server

Hi All,
We got an issue after applying the "SharePoint Server 2010 and Project Server 2010 Cumulative Update Server Hotfix Package (MOSS server-package,
Project server-package): June 28, 2011" on SharePoint 2010 server.
Environment details:
OS: Windows server 2008 R2 with SP1
TFS: TFS 2010 with SP1
DB: SQL Server 2008 R2
SharePoint: SharePoint 2010 with SP1
Due to this issue we are not able to proceed further to integrate PS 2010 with TFS 2010. Can someone please suggest solution for this issue.
Thanks,
Rajukumar

Hi Rajukumar,
At the very first, please refer to the article below for installing CU on Project 2010 server:
http://technet.microsoft.com/en-us/library/dd239177(v=office.14).aspx#Installation_steps
I found a blog for this issue:
http://blogs.msdn.com/b/brismith/archive/2011/07/06/project-server-2010-sp1-and-june-2011-cu-formatexception-when-trying-to-provision-a-pwa-site.aspx
In addition, I'd recommend you install latest update for your server.
Regards,
Rebecca Tu
TechNet Community Support

Pull DP issues after applying throttling.

After coming across this thread here https://social.technet.microsoft.com/Forums/en-US/97cc527d-9988-4b6c-bf09-743f9c272338/throttling-to-distribution-points?forum=configmanagergeneral&prof=required I'm wondering if BITS policy is causing my pull
dps to fail intermittently or if their failing just because their pull dps. We've got about 110 up and running now. Also as i've been working with the MS help desk for about a week at this point i'm wondering if its a product issue not client specific.
We've got about 500 locations with just under 300 of those going to be, running as pull dps. We're in the middle of a migration right now and were about half way through. That when I noticed some of the DPs are having problems. I have provided better detail
in the thread i just referenced. It seems like there is an issue either because of bits throttling or because of the nature of pulldps. Could anyone shine further light on what Andy made reference to toward the end of the thread i linked in the beginning because
this is putting me through the ringer!

Hey David thanks for sharing. Your environment sounds very similar to mine in size anyways. Some additional detail on my setup: 1 primary with ALL the main roles(i.e. FSP, MP, DP, WSUS, SUP, SCEP, and SQL is co-located on the server all running under a PKI
infrastructure), 2 more servers also in our datacenter, provisioned as just push dps ATM but built so that if need be SQL could be spun up and off load site roles or expand to include a downstream SUP point.
A couple of things worth mentioning. I did a brief overview of what the CUs fixed and didn't see anything specific called out that would resolve the problems that were having. I opened a ticket with MS and on a side note those techs are generally somewhat
knowledgeable but their track record with me is rather horrid. I've ended up solving 12 of 15 cases. The most recent ticket that I had open was in regard to the large amount of Pull DPs that are seeming to fail. We were able to get it healthy again by just
doing a bunch of troubleshooting. While it took a couple very long nights it was worth it. I learned quite a bit about how content replicates and why the DPs were failing.
As I'm sure that your aware, a pull DP is simply a client that pull content from the source push DP and then does the SIS(single instance storage) and dedup processing on the pull as opposed to it being handled by the source push dp. We identified 2 errors
of concern through testing. The cert maint log was complaining about 2 missing registry keys, and content was failing to replicate. We would open the DTS log on the pull and check the bits transfer either with bits admin or posh get-bitstransfer and see it
failing out after sometime. We added the keys it was complaining about as the tech had a KB in the HD system, and while that issue was resolved through this method post SP1 pre R2 that didn't seem to resolve it. In the end i checked a healthy pull DP and it
was complaining about the same missing registry keys. What got me to a healthy pull DP was reinstalling the SCCM client on the pull DP.
Now i just need to do that 30 more times approx. I might still look into deploying the CUs prior to trying to run through all them DPs as that is alot of work but first i have to deal with patch Tuesday duties. Allow me to stand on my soap box for a moment.
I am in the very unfortunate position of not only migrating a very large SCCM 2012 env. but I have to maintain both env. and continue on with the day to day operations. Deploying software, e.g. Java, Flash, Reader, etc. I have to create the patch packages
and test/deploy to the entire enterprise. Finally i have to keep up with the OSD piece as well. Needless to say I've been averaging about 80 hour work weeks and will probably continue to do so for the next few months until this migration is completed. Its
suicide! Every SCCM admin that i've talked with has said this project would fail because we are so under staffed. I've been killing myself to make sure that doesn't happen. So enough whining.
The last thing I want to say is I ran into yet another problem on all days patch Tuesday, two days ago. The WSUS app pool crashed. I upped its memory to 5 gigs from 1.8 and it crashed again. I upped it to 7, same. So then i upped it to just under 9 and it
stayed up. Looking like i'm going to have to up it to if my calculations are correct about 12 or 14 gigs to support our entire environment. I didn't know if the WSUS app pool went down client would come back in mass trying to grab meta data at essentially
the same time. Learned that the hard way. I've read that they will transfer between 5-10 megs each. This month was a brutal month for patches. One of the largest i've ever seen. Wanted to share that tidbit in case someone else happens to run into a similar
problem.
Finally we have a pressing issue that has everyone up to the CIO involved, and i"m about to open a new question on here as i can't find the answer after several days of looking. Clients are going out to the internet for FEP/SCEP udpates if they've been
off the network for more than 7 days and since networking only has QOS on the datacenter subnets its crushing the facilities circuits. We need the exact URL they're trying to go to and I simply can't find it. I looked inside the MPCMDRUN.Log and it just shows
go.microsoft.com/fwlink? and what worse that gets redirected to a load balanced partner of theirs...Akamai from what our Pathview appliances are showing us. If we can't get the exact link then we can't properly throttle it.
My manager wants me to put a BITS throttling client setting in place across the board for client machines, something like 64k, but i think that has the potential to make things worse not better. I say worse because now instead of pulling the 120 meg update
quickly i.e. about 10 to 15 minutes it will take 7 hours. From what i've read bits traffic from many hosts will stack up and is unaware of other production traffic. So it will increase the chance of saturating the link, not lessening it. I could be wrong.
Thats just what i gathered from one site i was reading.
If you have read this far, how are you dealing with SCEP/FEP cleints pulling their over 7 day updates over WAN circuits? I always thought they would pull that data from the SCCM environment and it appears that they initially try but fail then immediately
resort to going out to the internet. I'm thinking about possibly using GPO for SCEP/FEP even though it could potentially cause a conflict. I'll test it thoroughly if i do try that method. The most crazy thing about this entire diatribe that blew my mind is
every single client that migrates from 2007 to 2012 goes out to Microsoft and pulls 120 megs of data. Then they use the SCCM env. for their def. I had no idea that was happening until it start causing issues for a single site. I've tested in on 5 devices and
sure enough all 5 went to the internet immediately after being migrated.
Well this got way to long. My apologies. Thanks again for your input on the CUs. I will look into deploying them when I get some time, perhaps this weekend...or next. Wanted to go try for my 243 this weekend.

SSH Reconciliation Issue after applying BP4 for OIM11g

Hi all,
I'm facing an issue when trying to reconcile users between OIM11g and an SSH Target resource. In particulare, all worked well before applying the BP4 for OIM11g. I have a custom reconciliation rule that acts as mapper betweek an user's custom field called SSH, in which I enter the specific target account to reconcile, and the field Users.UserLogin of the SSH Form. The rule is specifically defined, through the design console, as "SSH equals Users.UserLogin". Now when I launch the SSH User Target Reconciliation for the specific host, OIM11g creates all the reconciliation events but does not link target accounts to IDM users (Not linked to any user).
Does anyone know how can I overcome this issue? Reading the log it seems to be no one error.
Thank you so much.
Regards,
Giuseppe.
Edited by: Giuseppe on Nov 14, 2012 2:35 PM

I see this stacktrace on OIM Server Output:
oracle.iam.platform.utils.SuperRuntimeException: oracle.iam.platform.utils.SuperRuntimeException: java.sql.SQLSyntaxErrorException: ORA-00936: missing e
xpression
ORA-06512: at "PROD_OIM.XL_SP_RECONBLKCHILDMTHACNTCRUD", line 1072
ORA-06512: at "PROD_OIM.XL_SP_RECONBLKACNTRQDCMTCHCRUD", line 90
ORA-06512: at line 1
at oracle.iam.reconciliation.dao.DBCall.execute(DBCall.java:24)
at oracle.iam.reconciliation.dao.ReconActionDao.processSPCall(ReconActionDao.java:1344)
at oracle.iam.reconciliation.dao.ReconActionDao.executeBulkAccountMatchCRUD(ReconActionDao.java:844)
at oracle.iam.reconciliation.impl.AccountHandler.executeBulkCUD(AccountHandler.java:72)
at oracle.iam.reconciliation.impl.BaseEntityTypeHandler.process(BaseEntityTypeHandler.java:42)
at oracle.iam.reconciliation.impl.ActionEngine.processBatch(ActionEngine.java:137)
at oracle.iam.reconciliation.impl.ActionEngine.execute(ActionEngine.java:92)
at oracle.iam.reconciliation.impl.ActionTask.execute(ActionTask.java:72)
at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:101)
at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:71)
at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy348.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
ORA-06512: at "PROD_OIM.XL_SP_RECONBLKCHILDMTHACNTCRUD", line 1072
ORA-06512: at "PROD_OIM.XL_SP_RECONBLKACNTRQDCMTCHCRUD", line 90
ORA-06512: at line 1

Font Issue after applying Patch on Forms 6i

Hi
we applied forms 6i patch 18 for some users the fonts are not appearing properly on the Web.
Has anybody experienced this before.
Please help.
regards.

Please provide details when posting if you expect quick answers.
If you are using Jinitiator and upgraded the version, it is likely that this is causing the problem. This will be especially true if you moved from 1.1.8.x to 1.3.1.x, although still possible with any big jump in versions. If this is the case, the easiest way to prove this theory is to uninstall the current Jinit version and resinstall the previous and retest. If a change in the Jinit does prove to have been the cause, there isn't much you can do, as there was a change in the font handling as you move to newer JRE (Jinit) versions.
You may be able to get some release by setting the mapFonts applet parameter to YES. Refer to MyOracleSupport note 338925.1 for more information.

Shared Library issues after update yesterday

Yesterday, some systems updates came through and I went ahead and said yes. I didn't really look at what they were. Since then I have been trying to use Panrama, Thinking Home software and Graphic Converter. Every time I try to access these programs, I keep coming up with shared library errors. Mainly it says that they are carbon library errors. I used Time Capsule to go back a week, because I had used both of these programs last week. It didn't change anything. Thinking Home is the current version and Panorama is the previous edition.
Any ideas of how to fix this?

First, what OS are you using? "Carbon Library" makes me think of OS 9
Second, launch Software Update and the go to its Preferences and click on the "Installed Updates" tab to see what updates you installed.
Third, make sure that you have the latest versions of those programs that run with your OS. Your "current" version may not work with the latest OS update. Sometimes it is something in a Security Update that cause problems.

Invoices Issue After applying patches of 11i Extended Support

Platform: Windows 2003 R2 32-bit
EBS: 11.5.10.2 (with 11i Extended Support Patches)
DB: 10.2.0.4
After completing the 11i Extended Support Patching activity we are receiving a complain from users' side that:
while user run autoinvoice program, auto invoice validation report shows following error
Please define all periods in which revenue is to be recognized
I have also check period in GL as well as receivable period is open status.

1.
Metalink Note:550572.1 says:
Specifically, the parameter btree_bitmap_plans should be set to False
And parameter is alreadt set as per note.
2.
Metalink Note:369437.1 says:
FYI: One-off Patch 4587470 on top of 11.5.AR.O is available
Which contains following file version:
ar patch/115/sql ARTECMMB.pls 115.67.15104.2
and we are already on version
ar patch/115/sql ARTECMMB.pls 115.67.15104.8
above AR.O.

Major iTunes library issues after upgrading to OSX Mavericks...

Hello
I recently upgraded iTunes and OSX Mavericks on my MacBook Pro and it appears to have played haywire with my iTunes library. I've lost almost half of the songs in most albums. The missing songs now show up with an exclamation point next to them and if i try to play them iTunes prompts me to locate them manually.
I have iTunes match but it's not clear how to restore prior purchases - in the iTunes store my albums just show up as 'purchased'.
For the stuff i burned from CDs years ago I assume my only option is to restore from an old backup.
Can anyone help?
Thanks

The option key... I've been holding down the command key... No wonder that didn't work. I should really be writing this stuff down!.
Regardless, Downloading and reinstalling iTunes did the trick.
Thank you mende1 & saffron63 for the assist!

Applying PSU 2 to OMS causes service to be unavailable.

Repository Database Oracle 11.2.0.3
OMS 12.1.0.2.0
Agent(s) 12.1.0.2.0
Grid Infrastructure 11.2.0.3
Our goal is to patch Enterprise Manager 12C R2 with the latest PSUs and patches so that we can being using it in ernest, tackling one problem at a time as needed with Oracle support.
This post address patches and PSU 2 for the OMS. I have opened a ticket with Oracle support. after 6 days have not had the help that I need.
Our base version for OMS we 12.1.0.2.0. These were the patches that we found needed to bring it up-to-date:
16236221
15920831
14822626
Patch 16236221 is PSU 2. We applied this patch, and then the next two listed above, and then made plans to move on to the Grid Infrastructure and Database. We admit to being somewhat confused by the new patching mechanisms as we jumped right from OEM 10.2 to EM12CR2. It's a different world.
With that aside:
PSU 2 was applied on 5/23/2013. A few days later we noticed the Oracle Load Map no longer was available because Sessions: CPU, Session: I/O, Sessions: Other and Instance CPU(%) from the database search list were not populated. A ticket with Oracle support told us this is working as designed because this feature is not meant for RAC databases (or which most of ours are.) Wonder why it worked before? If this is really the case, it makes the Oracle Load Map useless for us. Am I off base here?
As we waited for a response from support, we continued using EM. I came in on Monday morning and could not log in, getting the error: "Authentication failed. If problem persists, contact your system administrator."
Yikes. SYSMAN, SYS ... nobody could log in.
The emoms.trc file under user_projects/domains/GCDomain/servers/EMGC_OMS1/sysman/log was written to frantically from every node with an agent with:
[2013-06-10T15:15:18.630-04:00] [OJDL] [NOTIFICATION:16] [ODL-52001] [oracle.core.ojdl.FileLogWriter] [org: Oracle] [host: bkvlnxgrid02.ad.swfwmd.net] [nwaddr: 10.4.4.87] [tid: GCLoader[severity].- https://tpaoltp01da.ad.swfwmd.net:3872/emd/main/] [userId: oracle] deleting log file: emoms-15058.log, size: 5241836 bytes
[2013-06-10T15:15:18.628-04:00] [EMGC_OMS1] [ERROR] [] [oracle.sysman.core.pbs.gcloader.Receiver] [tid: GCLoader[severity].- https://tpaoltp01da.ad.swfwmd.net:3872/emd/main/] [userId: <anonymous>] [ecid: 0000JwH0qyWEoIc5xj8DyW1Hf_RR000003,0:143708:1] [APP: empbs] [URI: /empbs/upload] UPLOAD FAILED: emdUrl=https://tpaoltp01da.ad.swfwmd.net:3872/emd/main/ trackingKey=368670.1370891718000 type=severity e=java.sql.SQLException: ORA-06550: line 1, column 7:[[
PLS-00306: wrong number or types of arguments in call to 'START_UPLOAD'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'START_UPLOAD'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
As soon as this file reached about 5mg, it rolled off and created another one. We were getting a gazillion on them.
Not getting an answer from support, we needed to revert back to before the patch and access. We removed PSU 2 from the OMS and then saw that the MGMT_TABLESPACE was full and that these objects written to quickly:
SYSMAN EM_JOB_METRICS_PK INDEX
SYSMAN EM_JOB_METRICS TABLE
SYSMAN EM_VIOLATIONS TABLE
We doubled the space in MGMT_TABLESPACE and voila! We could log in to em again.
Things are not great, we are getting a new set of weird errors, but that's another story.
Has anyone had similar experiences? I'm focusing on getting OMS PSU 2 applied, since it is Oracle recommendation to remain current with PSUs.
Merely applying a PSU patch has consumed 6 days of our productivity.
Are we doing something wrong?
Has anyone else had problems after applying PSU 2 to the OMS?
Any words of wisdom?
Sherrie

Please note that my post stated: "I have opened a ticket with Oracle support. after 6 days have not had the help that I need."
I also agree that applying the latest PSU is a Best Practice, which Oracle defines as "a cumulative collection of high impact, low risk, and proven fixes for a specific product or component".
With that statement I feel there should not be the drastic issues that we have seen. Our policy is to always apply PSUs, no matter what the product or component, without issue.
Except for now. We did our research, and only open an Oracle ticket when we need expert help. That has not been forthcoming from them, but we are still working the ticket.
Hence, I opened this forum because many times I have found help here, where others have faced the same issue and now have an insight. When having a serious problem I like to use all of my resources, this forum being one of those.
To restate the question:
(1)     97% of our databases reside on RAC. From the Search List for Databases, we do not see the columns Sessions:CPU, Sessions: I/O, Sessions: Other, Instance CPU%, and are told this is working as designed because you must monitor the instance, not the database, with RAC.
     (a) After applying PSU2 the Oracle Load Map no longer showed any databases.
All of this in (1) is making the tool less useful for monitoring at the database level, which we do most of the time.
(2) Within a few days of applying PSU2, we couldn't log into EM and got the error "Authentication failed. If problem persists, contact your system administrator."
    (b) searching through the emoms.trc files we found the errors listed above posting frantically.
After rolling back PSU we are back in business.
However, there is still the need to remain current with the components of EM.
I am looking for suggestion, insights, experience. While I appreciate Akanksha answering so quickly, a recommendation to open an SR is not what I need.
Sherrie

Issue while applying bundle patch 11.1.1.3.8

Hi Experts,
We are facing issue after applying the bundle patch 11.1.1.3.8. We are unable to edit IT Resource and create/edit connectorafter appying Bundle Patch BP08 for oim 11.1.1.3.
Below are the steps followed
1.Click on manage IT Resource
2.Click on edit for a specific it resource.
3.Shows "A system error occured.Please contact your system administrator"
The patch was applied for fixing email notification issue. Before appying this the mentioned functionalities were working as expected.
Just wanted to check if anyone has faced this issue and what was done to resolve this.
Thanks,
Partha

what error you see in the server logs?

Host status after applying RUP6/HR FAMILY PACK K RUP3 is down

Hi,
After applying HR family pack k RUP3, the conc. managers are not coming up. And when i checked in OAM(Applications manager) i see only database status is ok. Rest all down in OAM. Any know issue after applying this patch. Or how to solve this
Regards
Taher

Hi Srini,
There was some problem in AIX. As the the application and database users(O/S) were not able to ping to the host itself.
First i hit the note
Target Queue/Node Unavailable - Internal Concurrent Manager Found Node to Be Down [ID 738405.1]
which says make sure you can ping as the O/S users(applmgr,oracle).
$oracle hostname was giving this error
0821-067 Ping: the socket creation call failed.
the file access permissions do not allow the specified
actions.
but #ping hostname is fine.
Only root was able to ping.
After changing the permission as follows
AIX Version 5.x Change the setuid bit permissions for /usr/sbin/ping. Enter:
#chmod 4555 /usr/sbin/ping
ran autoconfig. Then voila
I could open the forms, and the concurrent managers are up.
Thank you for all the help.
Regards
Taher

Issue with updation of PAN details in ESS after applying patch

Hi ,
We have applied a new patch recently,
as follows:
SAP_HR - To patch - 49
EA_HR - To Patch - 49
When users are trying to update PAN details it says throwing error " fill in the required fields,"
i tried to apply relevent note :1243216 , but iam not able to apply it as system says it cannot be implemeted.
Can any body come accross this issue please give me solution as this issue has become critical.
Thanks in advance .
Regards,
Evani

Duplicate post.
After applying patch , error found on bottom of signon screen
After applying patch , error found on bottom of signon screen

After apply Oracle 10.2.0.4 CRS PSU bundle 2 , node 1 reboot suddently

OS : hp itanium 11.31 (HP-UX B.11.31 U ia64 3664852670)
Oracle version : 10.2.0.4
After apply 8705958 CRS PSU 2(clusterware patchset update 2) , about one month later , node 1 reboot suddently.
I observed that two logs :
*$ORACLE_HOME/db10g/log/db1/racg/imon_db1.log:*
2010-03-28 09:27:34.857: [ RACG][21] [12463][21][ora.dbrac.db1.inst]: GIMH: GIM-00104: Health check failed to connect to instance.
GIM-00090: OS-dependent operation:mmap failed with status: 12
GIM-00091: OS failure message: Not enough space
GIM-00092: OS failure occurred at: sskgmsmr_13
*/var/adm/syslog/Syslog.log :*
Mar 28 21:38:41 db1 vmunix: file: table is full
Mar 28 21:49:20 db1 syslog: Oracle clsomon failed with fatal status 13.
Mar 28 21:49:20 db1 syslog: Oracle CRS failure. Rebooting for cluster integrity.
Mar 28 21:49:20 db1 vmunix: User requested reset of the system.
Mar 28 21:48:58 db1 vmunix: file: table is full
Mar 28 21:49:20 db1 above message repeats 635 times
Mar 28 21:49:20 db1 vmunix:
Mar 28 21:49:20 db1 vmunix: Oracle CRS TOC for clusterware integrity...
from metalink : File handles not released after upgrade to 10.2.0.3 CRS Bundle#2 or 10.2.0.4 [ID 739557.1]
The article imply that I can apply Patch 7493592 CRS 10.2.0.4 Bundle Patch #2 to fix it , but 8705958 CRS PSU 2 is superset of 7493592
Does anyone have suggestions~? Please kindly let me know
BRS , Jay
--detail steps : apply 8705958 CRS PSU 2(clusterware patchset update 2)
--unzip opatch to latest version 10.2.0.4.9
cd /opt/oracle/crs10g
mv OPatch OPatch.bak
cp -p /opt/oracle_sw/opatch/p6880880_102000_HPUX-IA64.zip /opt/oracle/crs10g/.
unzip /opt/oracle_sw/opatch/p6880880_102000_HPUX-IA64.zip
chown -R oracle:oinstall OPatch
su - oracle
#Verify that the Oracle Inventory is properly configured
/opt/oracle/crs10g/OPatch/opatch lsinventory -detail -oh /opt/oracle/crs10g/
/opt/oracle/crs10g/OPatch/opatch lsinventory -detail -oh /opt/oracle/db10g/
#Unzip the PSE container file
unzip 8705958.zip
#Apply the patch to the CRS Home and all applicable RDBMS homes as root
/opt/oracle/crs10g/OPatch/ocm/bin/emocmrsp
su - root
cd /opt/oracle_sw/PSU/8705958
/opt/oracle/crs10g/OPatch/opatch auto -och /opt/oracle/crs10g/
: /opt/oracle/crs10g/OPatch/ocm/bin/ocm.rsp
Patch node db1? (y/n/abort/N/N1-N2/help):
y
Applying patch 8705958 on node db1
Edited by: user7322888 on 2010/3/30 下午 7:22
Edited by: user7322888 on 2010/3/30 下午 8:23

Assuming you are correct that this is an error created by Oracle's patch ... open an SR at metalink.
Otherwise, when instances shoot themselves in the head, it is generally because they can not contact other instances and most often I find VLANs.

After applying FQDN with SSL sharepoint2010 document library's document open as Read Only

Hi,
we have sharepoint server 2010 installed in windows server 2008 R2. We build a document library. After that we installed Office Web Apps. Now,edit in Browser or edit in word/excel etc. all options are working fine.
After that, we configured the site with FQDN (Fully Qualified Doman Name) with SSL. Now, the
edit in browser mode is working fine form both server and client machine (for both windows and form based users).
But, When we are trying toedit in word or other office application mode, the files open as Read Only mode (both from server and client machine).
The users cannot save the file.
After trouble shooting a lot, we found many forum says to edit windows registry or do some other operation on client machine. But, in our case it is not possible to edit registry or do some other experiment on every client's machine.
Is their any option to solve the problem from server end, so that each client automatically can open the office files on their own PC and save them to server (instead of re uploading the files to server )?
Please, help us to give the suggestion for solving our problem.
Thanks,

Is Alternate Access Mappings configured correctly? Is the behavior consistent across different browsers? What are you seeing in ULS logs when the document is being opened from the library?
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

Workflow stuck in starting state after applying SharePoint 2010 CU December 2012

I have custom visual studio workflow which are associated with Custom content type. workflow gets triggered automatically when a file is uploaded to SharePoint. Everything was working fine till when i apply the following CU
http://blogs.msdn.com/b/joerg_sinemus/archive/2012/12/27/sharepoint-2010-and-december-2012-cu.aspx
After applying this my workflow get stuck in "Starting" state.
No error were logged in 14 hive logs.
Thanks in Advance!

It took me a while but I came up with a work around. There is a PowerShell script below that can be used to trigger the workflow. Hopefully this will hold all of us over until the official fix arrives.
First remove the auto start on change or new from the affected workflow
Edit the script below to match your environment
Add the script to Windows task scheduler with the PowerShell.exe in the command line
This assumes PowerShell.exe is in the path
Then add the full path and script name in the add arguements text box
Script:
#The purpose of this script is to start the SPD workflow with the windows task scheduler for a trigger
#This should avoid the check in-out issue caused by the December 2012 SP CU patch
#This needs to be run on an account with membership in the farm administration group for SharePoint and Shell in SQL
#You can use a find and replace to replace the server and other names with your actual names
#There are no status messages being used since this will be a scheduled task in the Windows task scheduler
#Add SharePoint modules and create variable space
add-pssnapin microsoft.sharepoint.powershell
start-spassignment -global
#Open the web site, list and the workflow
$site=get-spsite %site url%"
$web=get-spweb %Web url%
#Open the %affected% library or list and workflow association
$%affected%=$web.getlist("%affected%")
$manager=$site.workflowmanager
$culture=[system.globalization.cultureinfo]::currentculture
$wfname="%affected workflow name"
$association=$%affected%.workflowassociations.getassociationbyname($wfname,$culture)
$data=$association.associationdata
$wfrunoption=[microsoft.sharepoint.workflow.spworkflowrunoptions]::synchronous
#Start workflow
foreach ($item in $%affected%.items) {
$site.workflowmanager.startworkflow($item,$association,$data,$wfrunoption)
stop-spassignment -global

Library issues after applying PSU 10.2.0.5

Similar Messages

Maybe you are looking for