Library.itl

itunes software wont open ,all i get is ITUNES.ITL LIBRARY IS LOCKED OR NO PERMISSION can anyone help with this issue , i have uninstalled itunes completely downloaded it again and still get the same message appearing when i try and launch itunes help please

ITUNES.ITL LIBRARY IS LOCKED OR NO PERMISSION
This message means XP thinks another program is using this file, or you don't have the right login to change it.
Do you run Norton/McAfee/ZoneAlarm/etc security software that would prevent access to this file?
The default path for it in XP is
C:\Documents and Settings\username\My Documents\My Music\iTunes\iTunes Library.itl
Sometimes restarting your PC will remove file locks, you could also try that fairly quickly.

Similar Messages

  • When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

    When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

    Anyone can help to advice how to solve this issue ?

  • I have multiple libraries on an external drive. Somehow all the iTunes library files i.e. iTunes Library.itl, xml, itdb, Media folder, etc disappeared! Only the music files remain. Now when I start iTunes w/option it can't find any of the old libraries!

    Help! I 'm using an old G4 powerbook, Mac OSX 10.5.8, iTunes ver 10. I have multiple iTunes libraries on an external drive. Everything was fine for a while, then all of the iTunes library files, i.e. iTunes Library.itl, xml, itdb, artwork folder, Media folder, etc mysteriously disappeared! Only the music files remain (thank god) So now when I start iTunes w/option key to choose a library, I can't choose any of them because iTunes won't recognize them. Because all the library stuff is missing. So can I re-create the library files? (I don't care if I lose my ratings)
    Or should I create a new empty library on the external drive, then manually move all the music files to the Media folder in the new library?
    I tried some stupid ideas like creating a new library just to start iTunes, then going into prefs and advanced, then under iTunes Media folder location, selecting the location of the old library on the external, to see if iTunes would then find all the music which is still there, but no workee.
    I'm out of ideas, and I searched the archives.
    Help! anyone?
    Scott

    I don't know if this is me adding files to iTunes when the external wasn't connected
    it is.
    is it OK to just keep deleting that library on the Air?
    i wouldn't - at least not until i
    mount the external
    point iTunes media folder location back to the external via preferences > advanced
    consolidate my library via file > library > organize library
    The ntfs hasn't seem to be causing any problems, but I've always wanted to know.
    in order for your Mac to write to NTFS drives, it needs some help by installing e.g. the NTFS 3G driver. apparently that or something similar is installed on your Mac already. preferably, it would be formatted for Mac but then windows machines would need to have e.g. MacDrive installed to recognize the drive.

  • I have the following error The file "iTunes library.itl" cannot be read because it was created by a newer version of iTunes

    Can anyone help me with this problem.  I tried updating the latest itunes and it caused an error MSVCR80.dll missing.  I then tried fixing it after reading other people had the same problem and a solution was given about uninstaling itunes and the order in which to do that.  I did that but now get the error "the  files "itunes library.itl" cannot be read because it was created with a newer version of itunes.  I see a solution has been given about this but I cannot find what is suggested to enable me to follow instructions.  Can anyone please go through step by step (letting  me know where I can find what is needed) to enable me to be able tio log into itues again.  Thanks

    Hi pussygalore,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    You may want to make sure that in the last step (reinstalling iTunes) that you are installing the latest/newest available version, and not attempting a reinstall from an older file.
    Regards,
    - Brenden

  • I have had to unistall itunes and re install it.  Now I get a error message - The file 'itunes library itl' cannot be read because it was created by a newer version of itunes.  Help?

    I had a prompt to update the software, when this was updated i tunes would not open coming up with a 404 error message.  So I uninstalled it, reinstalled the 64 bit version for windows, now it wont open with the mentioned error message.

    zepel has it, but perhaps some more detail will help.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • TS3212 I just installed iTunes (from the apple site) on to my new laptop.  When I click on the icon to open I get a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes".  Now what do I do and ho

    I just installed iTunes on my new laptop.  When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes".  I have no idea what this means or what to do about it.  I can't even find a file on my computer like the one referred to in the pop up.  I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes.  What should I do to fix this?

    What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
    Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future.

  • When I try to open ITunes it brings up a box that says the iTunes Library. itl file cannot be found or created. the default location for this fie is in the itunes folder in the music folder How do I solve this

    My laptop was updating itunes and turned off and every since when i try to load itunes it brings up a window that says
    The itunes library.itl fie cannot be found or created. The default location for this fie is in the itunes folder in the Music folder.
    an I cant figure out what to do to get itunes to load so I can't use itunes at all which ***** since it also means I right now I can't add music to my ipod or apps or anything. So hopefully someone can tell me what happened and how to fix it or solve it

    Hi pgarard1,
    If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Regards,
    - Brenden

  • When I try to open Itunes it says Library.itl file is locked, on a locked disk, or you do not have permission for this file.  How do I open?  What did my Kid do?

    My daughter added more storage to her cloud while i was at work.  When I came home and tried to get onto Itunes I got the message,'library.itl file is locked, on a locked disk, or you do not have write permission for this file.  I tried uninstalling Itunes on my computer and reinstalled.  After I tried to get in and the same message came up.  I can get onto Itunes on different computers except one.  Any Ideas?

    Hello MF7642,
    Thank you for contacting Apple Support Communities.
    You can use this article to troubleshoot your issues with iTunes.
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Regards,
    Jeff D.

  • TS1717 unes, i have windows 8, i get the message, "the itunes Library .itl file is locked, on a locked disk, or you do not have write permission for this file.  how did this happen, how do i fix this?

    the message"The itun, library .itl file is locked, on a locked disk, or you do not have write permission for this file". i have windows 8. how why did this happen? how do i correct this and prevent another occurance?  I am able to access itunes on my i5, ipad, and my old i4 that i use solely as my ipod now. At the time  problem occurred, i was connected to ext hard drive that hold over 190GB music, to add to my library. I am now unable to add to my library using my laptop.  any advise/help is greatly appreciated!!

    I just had the same problem and was able to fix it after trying a couple of things I found after a search.
    The solution that worked for me:
    Find iTunes folder - it should be in C:\Program FIles (x86) or similar depending on your operating system
    Right click the entire folder (no need to open it) and click properties
    Click the security tab
    Click edit and highlight the user name under which you logged in.
    Click the box next to full in the allow column, which should check everything
    Click apply
    Open iTunes
    This worked for me.

  • How To Fix: "The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file."

    I can't reopen my iTunes after I have to force quit when it does not respond. I get this message:
    "The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file."
    I've read to do the solutions. I right clicked on both the iTunes and Music folder and went to info for each. On both the lock at the bottom of the Get Info was locked. All of my users including admin can read and write all files within those folders. They are even a shared folder. I clicked on the lock to unlock it, typed in my admin password, and went to the gear to apply to all files inside. After doing that I keep getting the saved message.
    I tried another way that I've found online to move my ituneslibrary folder to the desktop and then open my iTunes. In theory the iTunes is supposed to ask for where the iTunes library is. Once that is prompted you quit iTunes and drag the iTunes Library folder back to the folder from the desktop and reopen iTunes to apprently solve the problem. However, when I move the iTunes Library file to the desktop and try to reopne iTunes the icon just keeps bouncing and when I right click the application does not respond.
    This problem is only resolved if I restart/shut down my macbook pro which is a 15-inch Core 2 Duo with intel. It will be 5 years old in December. I currently have Lion and the latest iTunes 10.5. This problem started in late December. 

    If you hold down the option key when starting iTunes, it will allow you to select a library or create a new one.
    You can create a new one, and then add all of your iTunes music back in by simply dragging the old iTunes music file onto iTunes.
    There are more detailed instructions at http://support.apple.com/kb/HT1451#
    It will show you how to re-build your iTunes database file.

  • ITunes won't open, I get this message: The iTunes Library .itl file is locked, on a locked disk or you do not have write permission for this file.

    iTunes won't open.
    I get this message: The iTunes Library .itl file is locked, on a locked disk or you do not have write permission for this file.

    This may indicate a corrupt preference file with iTunes trying to open the wrong location. Try holding down shift as you launch iTunes then choose the correct file, normally <User's Music>\iTunes\iTunes Library.itl. See iTunes: How to open an alternate iTunes Library file or create a new one.
    tt2

  • My windows pc is showing an error message "The file iturnes library itl cannot be read"

    My windows pc is showing an error message "The file iturnes library itl cannot be read because it was created by a newer version of itunes".  I have not downgraded my itunes or done anything with  it other than follow standard download instructions .I have an ipad one and iphone 3g, neither work now help?

    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • HT1527 iphone wont open it says the itunes library.itl file is locked on a locked disk or you do not have write permission for this file. nothing l  do seems to help thanks

    Have tried to connect and sync my iphone 4 to my computer in itunes but this message keeps coming up The itunes Library .itl file is locked on a locked disk. or you do not have write permission for this file.

    I have tried both suggestions, unfortunately neither fixed this for me. Hoping there's another possible fix. Thanks in advance. 
    Empty/corrupt iTunes library after upgrade/crash and/or Repair security permissions for iTunes for Windows.

  • TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

    I cannot open itunes.  Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
    What do I need to do so I dont lose all my loaded music, etc.?
    Thanks

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • TS1717 My itunes won't open and I get message that says "The file iTunes library.itl cannot be read because it was created by a newer version of itunes." I am unsure what this means, but I have uninstalled and reinstalled the itunes, and it still will not

    I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means.  I have Windows 7 on my computer and was able access itunes until just recently.  I have tried uninstalling and reinstalling itunes multiple times and that does not work.  Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.

    That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • I can't open itunes it's giving an error "The Itunes Library.itl file is locked, on a locked disk, or you do not have write permission for file.

    yes itunes will not open it gives me an error that the file itunes library.itl is locked or on a locked disk or i don't have write permission for it.

    Make sure that you have closed all programs that might be using the iTunes library.itl file. I would hit CTRL + ALT + DEL buttons and enter the Task Manager - from there end any unnecessary program running in the background.
    Next try to start iTunes again. If it fails, restart PC, do the same with Task Manager and try to open iTunes again.

Maybe you are looking for

  • Add a new  column in a baseform

    Dear All, How do I add a new   matrix column in a baseform for a particular panel . kindly suggest me the code. Edited by: Sanjoy Paul on Jul 3, 2008 1:33 PM

  • R12 upgrade causing HGrid tree region issue

    in 11i the HGrid and tree region was showing the expansion (+ ) node and the child records were being shown after upgrade to R12, the child nodes are not being shown. Only the parent node. checked the view objects and definition of HGrid region. The

  • Database is in 'STARTED' state error???

    Hi, Has anyone ran a Job in OEM and encountered this error: Database is in 'STARTED' state If so, how can I correct this problem. I looked on Metalink and it said to connect tot he DB with the dbsnmp account, but that did nothing. Any ideas?

  • Changing a title's font size

    I'm not sure if this is possible or not, but when I add a centred title with two lines, iMovie automatically makes the font size of the first line larger than that of the second line. Ideally, I'd like this to be the other way around, so that in my c

  • Need to automate several fairly simple actions

    Hi, I need to automate several simple actions, and wonder what is the best approach - automator or Apple Script? And if so, how? When I work away from home, I need to still be able to easily send email, bypassing the annoying security of my ISP - usi