Library not Found: /System/Library/Frameworks/StoreKit.framework/Versions/A/StoreKit
Hello all,
I am working with a MacBook purchased in 2009, OSX 10.6.8, processor: 2.13 GHz Intel Core 2 Duo, Memory: 2 GB 800 MHz DDR2 SDRAM.
I recently downloaded and tried to install a game I had previously successfully installed from Gamehouse.com. The download goes fine, when I open the .dmg file the correct window pops up with an icon to double-click to start installation. At that point I receive an error message (see below). I contacted Gamehouse and ran through a number of solutions they gave me, including uninstalling and removing all traces of this or any other game from my computer (including .plist files), installing any available updates (iTunes finally got that update I've been postponing for months...), and dragging the installer icon into various different locations before opening. All to no avail.
It appears to me the issue is this line in the error message: "Library not Found: /System/Library/Frameworks/StoreKit.framework/Versions/A/StoreKit"
I checked the Frameworks folder and there is nothing there called StoreKit.framework, so that seems to make sense. It isn't anywhere else in the computer either. After a quick google I found this problem pops up now and then - there is one other question on the same issue in this forum, but I have no idea if the solution given there works, as the original poster never came back. Their suggestion was to try reinstalling Just OSX from the boot disc. I haven't attempted this yet - I thought I'd see if I can get any input before going that route.
Thank you for any advice. Here is the full error report:
Process: Delicious - Emily's Wonder Wedding [349]
Path: /Applications/Delicious - Emily's Wonder Wedding Premium Edition.app/Contents/MacOS/Delicious - Emily's Wonder Wedding
Identifier: com.mrgoodlivng.delicious8.mac
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [91]
Date/Time: 2014-08-10 14:33:56.929 -0500
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 201860 sec
Crashes Since Last Report: 18
Per-App Crashes Since Last Report: 21
Anonymous UUID: 750B56F7-4793-44CA-847D-5A35F9F8DABC
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/StoreKit.framework/Versions/A/StoreKit
Referenced from: /Applications/Delicious - Emily's Wonder Wedding Premium Edition.app/Contents/MacOS/Delicious - Emily's Wonder Wedding
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <749D24EE-54BD-D74B-D305-C13F5E6C95D8> /usr/lib/dyld
Model: MacBook5,2, BootROM MB52.0088.B06, 2 processors, Intel Core 2 Duo, 2.13 GHz, 2 GB, SMC 1.38f5
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHZ2160BH FFS G1, 149.05 GB
Serial ATA Device: HL-DT-ST DVDRW GS22N
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000 / 3
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0229, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2
That file is a OS X system file, you'll have to overwrite OS X with a new copy to restore it.
First things first
Emergency backup procedure
Drag and drop copy your users file folders (music, pictures, documents etc) to a regular external powered drive as soon as possible.
Do not use, setup or trust only TimeMachine at this troubled time as it will copy corrupted data and we need just your users files safe just in case. TimeMachine cannot be used with a Windows PC.
Unmount and Disconnect all external drives once the backup process is completed.
Note:
If you have any over 4GB sized files, those won't copy to a standard formatted FAT32/MSDOS drive from the factory, if you need to save these 4GB+ files use another blank/empty drive and use Disk Utility to format it 1 Partition, Option: GUID, Format: OS X Extended Journaled (or the standard default one for older Mac's).
Mac's cannot copy to nor format a NTFS drive. ExFAT format to be used with a Windows machine must be right click formatted by Windows, not OS X (does it wrong) XP machines can install a free exFAT update from Microsoft. Vista-Win 8 can format exFAT.
Formatting a drive will erase all data on it.
Once your files are safely copied off the machine, next run through this list of fixes, I suspect #8 Reinstall Just OS X + Software Updating fully should restore the broken/missing file.
..Step by Step to fix your Mac
Overwriting OS X with a new copy does not delete most programs or users files, but you backup your users files regardless as it might be something more than we currently know at this time.
Similar Messages
-
Getting this error on iPhoto open it refers to iLifeSlideShow and iPhoto quits - or doesn't open.
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not foundYes, some perople have seen this. Options:
1. Try reinstall iPhoto. (see below)
2. If you have access to another Mac with the same version of the OS, try and copy that framework over
3. Reinstall the OS.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
Regards
TD -
Dotfuscator CE error: External type not found System.Windows.Input.ICommand,PresentationCore
Preemptive will not support CE so I am trying here...
I have an application targeting the .NET Framework 4.0. It builds and runs fine but I cannot get it to compile in Dotfuscator CE. I am stuck.
Dotfuscator CE (v5.0.2500.0) with Visual Studio 2010 SP1. Here is the Error:
Resolving method references...
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Build Error.
The problem seems to originate from ICommand being moved from PresentationCore.dll (in NET 4.0) to System.dll (in NET 4.5). Studio handles this and compiles fine as I am targeting NET 4.0 and the references all point to
C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\
Dotfuscator CE however does not seem to handle it correctly and I am not sure how to correct the issue. Any help would be greatly appreciated!!Hi Perter,
Thanks for your response.
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Maybe it is related to the references in your project.
Reference:
The type 'System.Windows.Input.ICommand' exists in both 'PresentationCore.dll' and 'System.dll'
Since it is not the VS General issue, I am moving your question to the moderator forum ("Where is the forum for..?").
The owner of the forum will direct you to a right forum. Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
"Library not found or failed to load" on other system
Dear all,
I have searched the forum a little and found similar problems, but not really a solution. Therefore I will give it a try with this post:
I have two computers both similar: Windows 7, 64-bits, Labview 2011 (service pack 1) installed.
And the goal is to acquire images from a BitFlow frame-grabber.
BitFlow provided software for the frame-grabber, which is tested for windows 7, 64 bits and Labview 2011. With one of the machines (machine A), the programming is working fine. No problems there.
On the other machine (machine B), Labview is unable to read the provided library: After selecting the library in the Call Library Function Node, Labview gives the error "Library not found or failed to load" at the Call Library Function Node.
Machine B has - in all my knowledge - the same configuration of all the software compared to machine A, therefore I have no idea what the problem is here. The only difference is that machine B has a different computer security protocol - but it does have administrator rights...
Additionally, I have tried a stand-alone executable (and installer) which did work on a third machine, but not on the machine B - due to the same problem.
Does anybody have a clue in what direction I should search for the solution? Or what the problem may be? Or what I am missing here?
Let me know if you need any additional info.
Best regards,
Michael
Solved!
Go to Solution.Haverdings wrote:
"library not found or failed to load". I assume that would mean a 'failed to load' error (because the library is present), but I don't know whose 'fault' this is.
The Bitflow driver is installed by just copying files to your computer. No installer is required - so they claim. Is there a way to check if the required C runtime version is used?
Thanks for the responses
Well while the message could be more elaborate and make an explicit difference between file not found and not being able to load it, if LabVIEW would do some extra humba mumba woodoo, it's exactly what Windows tells an application when it tries to load a DLL. That error code simply says, sorry I couldn't load the DLL and that could be becuase it doesn't exist but also because I couldn't load it for other reasons, such as missing dependencies, (or a corrupted OS, or whatever else). Not very helpful for sure, and I'm not sure LabVIEW should try to be smarter than Windows here, by trying to see if the DLL did actually exist. For all it's worth it could be a text file, or anything else that is not a DLL at all, having the DLL name!
An interesting read that actually explains the problem a bit more can be found here. You see that it is not a LabVIEW problem but just about anyones problem who has to deal with DLLs that can come just about from anywhere.
The best way to see what dependencies your DLL has, is to load it with the Dependency Viewer program mentioned in there. It has it's problems nowadays on Windows 7 systems but still can give you some useful informations.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Drive not found in library database
Greetings.
I'm new to OSB and am having tape drive, volume problems.
File system backups only complete successfully when drive (IBM4_0_0_1_1) is used. When OSB attempts to use other drives in the library it logs the following errors listed in "Transcript".
I'm running OSB (10.4.0.3.0) on a Linux server (Oracle Linux Server release 6.0) with a SL500 library controller by a ACSLS(8.3.0) server.
Please advise.
Transcript:
2014/04/23.11:44:01 ______________________________________________________________________
2014/04/23.11:44:01
2014/04/23.11:44:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:44:01
2014/04/23.11:44:01 ---
2014/04/23.11:44:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.11:44:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.11:44:01 drive not found in library database (library manager)
2014/04/23.11:45:01 ______________________________________________________________________
2014/04/23.11:45:01
2014/04/23.11:45:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:45:01
2014/04/23.11:45:01 ---
2014/04/23.11:45:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.11:45:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.11:45:01 drive not found in library database (library manager)
2014/04/23.11:46:01 ______________________________________________________________________
2014/04/23.11:46:01
2014/04/23.11:46:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:46:01
2014/04/23.11:46:01 ---
2014/04/23.11:46:01 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.11:46:01 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.11:46:01 drive not found in library database (library manager)
2014/04/23.11:48:01 ______________________________________________________________________
2014/04/23.11:48:01
2014/04/23.11:48:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:48:01
2014/04/23.11:48:01 ---
2014/04/23.11:48:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.11:48:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.11:48:01 drive not found in library database (library manager)
2014/04/23.11:49:01 ______________________________________________________________________
2014/04/23.11:49:01
2014/04/23.11:49:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:49:01
2014/04/23.11:49:01 ---
2014/04/23.11:49:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.11:49:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.11:49:01 drive not found in library database (library manager)
2014/04/23.11:50:01 ______________________________________________________________________
2014/04/23.11:50:01
2014/04/23.11:50:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:50:01
2014/04/23.11:50:01 ---
2014/04/23.11:50:01 No volume could be found in SL500 (for drive HP5_0_0_2_3) to use for job admin/83.1.
2014/04/23.11:50:01 The problem using HP5_0_0_2_3 and the volume it contains, if any, is
2014/04/23.11:50:01 drive not found in library database (library manager)
2014/04/23.12:00:01 ______________________________________________________________________
2014/04/23.12:00:01
2014/04/23.12:00:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:00:01
2014/04/23.12:00:01 ---
2014/04/23.12:00:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.12:00:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.12:00:01 drive not found in library database (library manager)
2014/04/23.12:01:01 ______________________________________________________________________
2014/04/23.12:01:01
2014/04/23.12:01:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:01
2014/04/23.12:01:01 ---
2014/04/23.12:01:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.12:01:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.12:01:01 drive not found in library database (library manager)
2014/04/23.12:01:24 ______________________________________________________________________
2014/04/23.12:01:24
2014/04/23.12:01:24 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:24
2014/04/23.12:01:25 ---
2014/04/23.12:01:25 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.12:01:25 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.12:01:25 drive not found in library database (library manager)
2014/04/23.12:04:01 ______________________________________________________________________
2014/04/23.12:04:01
2014/04/23.12:04:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:04:01
2014/04/23.12:04:01 ---
2014/04/23.12:04:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.12:04:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.12:04:01 drive not found in library database (library manager)
2014/04/23.12:05:01 ______________________________________________________________________
2014/04/23.12:05:01
2014/04/23.12:05:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:01
2014/04/23.12:05:01 ---
2014/04/23.12:05:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.12:05:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.12:05:01 drive not found in library database (library manager)
2014/04/23.12:05:21 ______________________________________________________________________
2014/04/23.12:05:21
2014/04/23.12:05:21 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:21
Backup started on Wed Apr 23 2014 at 12:05:51
Volume label:
Volume tag: LEV018
Volume UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Volume ID: mf_2min-000025
Volume sequence: 1
Volume set owner: root
Volume set created: Wed Apr 23 12:05:51 2014
Volume set expires: Wed Apr 23 12:07:51 2014
Media family: mf_2min
Original UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Archive label:
File number: 1
File section: 1
Owner: root
Client host: x4440a
Backup level: 0
S/w compression: no
Archive created: Wed Apr 23 12:05:51 2014
Encryption: off
Dumping all files in /etc
Backup complete on Wed Apr 23 2014 at 12:06:03
Backup statistics:
status 0
devices IBM4_0_0_1_1
devices 1
volumes mf_2min-000025
voltags LEV018
file 1
host x4440a
encryption off
start_time Wed Apr 23 2014 at 12:05:51 (1398276351)
end_time Wed Apr 23 2014 at 12:06:06 (1398276366)
backup_time Wed Apr 23 2014 at 12:05:51 (1398276351)
entries_scanned 3373
kbytes_scanned 40556
entries_excluded 0
entries_skipped 0
mount_points_skipped 0
files 2047
directories 315
hardlinks 0
symlinks 1011
sparse_files 0
filesys_errors 0
unknown_type 0
file_kbytes 39264
dev_kbytes 35977
dev_iosecs 2
dev_iorate 18.4 MB/S
wrt_iosecs 15
wrt_iorate 2.5 MB/S
physical_blks_written 1102
write_errors 0
physical_blks_read 2
read_errors 0
error_rate 0%
path /etc completed, status 0
[root@x4440a backup]# obtool lsdev -lvg
SL500:
Device type: library (ACSLS)
In service: yes
Debug mode: no
Barcode reader: yes
Barcodes required: yes
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: e0b58224-a1a4-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
ACSLS server: v215f
ACSLS port: 0
ACS id: 0
ACSLS access id: acsss
Reservation 1:
Component: obacslibd
Host: x4440a
Process: 32195
Element counts / addresses:
10 mte: 1 - 10
281 se : 1 - 281
1 iee: 1
1 dte: 1
Moves:
From mte, to: mte 0 se 0 iee 0 dte 0
From se, to: mte 0 se 0 iee 1 dte 1
From iee, to: mte 0 se 0 iee 0 dte 0
From dte, to: mte 0 se 1 iee 0 dte 0
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=0, unload_any=1, sense_dev_range=0
State of barcode reader: enabled
IBM4_0_0_1_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: 14 minutes, 58 seconds
UUID: 179eb954-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg18
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD4
Firmware: C7Q0
Serial number: 1310127325
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_2_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 7498ff66-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg16
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1168002114
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP6_0_0_3_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 3
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: cd20d3fc-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg21
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 6-SCSI
Firmware: J39S
Serial number: HU1233PPNN
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_1_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 5b6cf420-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg15
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1068002447
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP4_0_0_2_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 8bd3659a-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg13
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 4-SCSI
Firmware: H64S
Serial number: HU1803168E
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_3:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 3
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 9ee7dbd4-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg23
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NFE
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_4:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 4
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: b45b889e-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg24
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NBF
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
[root@x4440a backup]#
[root@x4440a backup]# obtool lsvol -L SL500 -l
Inventory of library SL500:
in 1: barcode F50216, oid 100
in 2: barcode I50116, oid 101
in 3: barcode LEV008, oid 102, mediainfo hw encryptable
in 4: barcode LEV010, oid 103, mediainfo hw encryptable
in 5: barcode LEV017, oid 104, mediainfo hw encryptable
in 6: volume mf_2min-000025, barcode LEV018, oid 155, 781232128 kb remaining, expired, mediainfo hw encryptable
in 7: barcode LEV049, oid 106
in 8: barcode LEV058, oid 107
in 9: barcode PQ4196, oid 108
in 10: barcode PQ4883, oid 109
in 11: barcode S50282, oid 110
in 12: barcode S50290, oid 111
in 13: barcode S50291, oid 112
in 14: barcode S50292, oid 113
in 15: barcode S50300, oid 114
in 16: barcode S60111, oid 115
in 17: barcode S60113, oid 116
in 18: barcode SF6410, oid 117
in 19: barcode SF6411, oid 118
in 20: barcode SF6412, oid 119
in 21: barcode SF6413, oid 120
in 22: barcode SF6414, oid 121
in 23: barcode SF6416, oid 122
in 24: barcode SF6417, oid 123
in 25: barcode SF6418, oid 124
in 26: barcode SF6419, oid 125
in 27: vacant
in 28: vacant
in 29: vacant
in 30: vacant
in 31: vacant
in 274: vacant
in 275: vacant
in 276: vacant
in 277: vacant
in 278: vacant
in 279: vacant
in 280: vacant
in 281: vacant
in iee: vacant
in dte: vacant
[root@x4440a backup]#Rich
Thanks for your response.
ACSLS is part of the configuration requirements I need to have in this OBS environment.
I'm going to re install OBS just to see if anything changes.
Thanks again.
Update:
When configuring devices in OSB that are ACSLS in nature it is a requirement to restart the obacslibd after mkdev or certain chdev commands are preformed.
After the daemon was restarted I was able to use the attached tape drives. -
Call Library Function Node: library not found or failed to load
Hello,
I had a VI that could not find some of the dll functions it needed. It works on one machine and not on another. So foolishly I copied the dll in question from the working machine and pasted it over the one on the non-working machine.
Now all my math functions are broken on the machine I copied the dll too. The error is "Call Library Function Node: library not found or failed to load"
And if I try to relink in the VI I get "Error loading C:\National Instruments\LabVIEW 8.2\resource\lvanlys.dll" A dynamic link library (DLL) initialization routine failed."
I tried a repair labview and that did not help.
I tried uninstall and reinstall labview and that did not help!
Please help me fix this!
Version 8.2
dll: C:\National Instruments\LabVIEW 8.2\resource\lvanlys.dll
JimWhat library did you first copy?
Also lvanlys.dll depends on the Intel Math Kernel Library that gets installed in a different location "C:\Program Files\National Instruments\Shared\MKL".
This Intel Math Kernel Library again depends on the Visual C runtime libraries. Most likely you replaced one of those runtime libraries somehow and now the Math Kernel Library (MKL) fails to initialize which causes thelvanlys.dll to fail its load.
Without a good view on your system and what other NI software you have installed it is very hard to recommend a good way of proceeding. There are various versions of the MKL used by various versions of NI products and just deleting the entire MKL folder might get you into trouble with other NI tools.
Deinstalling everything from NI, deleting the entire National Instruments folder and then reinstalling what you need would be the most safe proceeding.
And next time don't just copy some Visual C runtime libraries between machines. Their dependencies are complicated at the least and simply not graspable by us mere mortals. Use the according C runtime installer for the version you need as that installer will take care of installing the right versions of C runtime components and registering everything proberly so you do not usually run into problems with other applications using different versions of the C runtime.
Message Edited by rolfk on 03-01-2010 10:26 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Fobs4JMF, Native shared library NOT found, Mac OS 10.5
Hello all,
We are having trouble getting Fobs4JMF working on a MAC; we are receiving the following error:
Fobs4JMF - Native shared library NOT found
java.lang.UnsatisfiedLinkError: /Users/susan/Documents/workspace/GemIdent/libfobs4jmf.jnilib:
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1822)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1739)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1030)
at com.moesol.bindings.NativeLibraryFinder.loadLibrary(NativeLibraryFinder.java:63)
at com.omnividea.media.parser.video.Parser.<clinit>(Parser.java:107)The source code we are using works fine on a windows machine using the native .dll file.
The following files were copied from the binary download into our project folder:
a) libfobs4jmf.jnilib
b) jmf.jar
c) fobs4jmf.jar
d) jmf.propertiesThe jmf and fobs4jmf jars are added to the classpath
We have tried the following to no avail:
a) adding the "libfobs4jmf.jnilib" file to a /lib directory in the project space
b) adding the "libfobs4jmf.jnilib" to "Contents/Resources/Java"
We thought it may have been a 64bit issue, so we copies the jmstudio executable to our project workspace, executed it and we are able to play video files without any problems. Therefore, it's a problem with our setup.
Our versions are listed below:
Eclipse 3.3.1
JRE 1.6.0
Mac OS 10.5, 64bit (although it was also tried on OS 10 32bit to no avail)
Fobs4JMF 0.4.1
JMF 2.1.1e
Thanks so much for your support,
Adam Kapelner
Lead Engineer, gemident
Stanford University
Susan Holmes
Stanford UniversityHi Captfoss,
Thanks for your help.
We've figured it out. Fobs4JMF 0.4.1 is compiled in Java 5 for 32bit. Once we compiled in Java 5, it began to work. Repeat: do not use Fobs4JMF on a 64bit mac running Java 6, it will require a 64bit native library. The provided jnilib is in 32bit!
Here was out directory structure:
/gemident.jar
/jmf.properties
/libfobs4jmf.jnilib
/lib/jmf.jar
/lib/fobs4jmf.jarAnd our manifest.mf:
Manifest-Version: 1.0
Main-Class: GemIdentOperations.Run
Class-Path: lib/jmf.jar lib lib/fobs4jmf.jarWe can execute with the following:
java -Xmx1400m -jar gemident.jarThere is no need for any "Djava.library.path" or "LD_LIBRARY_PATH" - it should just work
Adam -
"iTunes MobileDevice library not found"
Hi,
I get the following error message when trying to find a connected iOS device in the AIR for iOS Settings (Post publishing option):
"iTunes MobileDevice library not found. Please check your iTunes installation."
iTunes works fine, and I am able to see connected devices in that application. I am running Windows 8.1 64-bit, Flash Pro CC 13.1.0.266 and the latest iTunes.
Any suggestions?
Thanks.I've had this problem for since September 2013, but have not been able to get any useful information out of Adobe. They blame it on iTunes.
See this thread for more:
iTunes MobileDevice library not found error when 'Install application on the connected iOS....'
It did use to work on my system. I have another colleague with exactly the same versions installed and it works for him. -
GNU fortran 90 no longer works.
I get the error message:
gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
ld: library not found for -lcrt1.o
collect2: error: ld returned 1 exit statusGNU fortran 90 no longer works.
I get the error message:
gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
ld: library not found for -lcrt1.o
collect2: error: ld returned 1 exit status -
Transport library not found: dt_socket
I'm a JBoss newbie trying to use to start jboss 4.0.3 on Fedora Core 4 with java 1.5.0_05 in debug mode. Following the instructions found here: http://java.sys-con.com/read/44918.htm, I modified the the jboss startup script run.sh by adding the line
JAVA_OPTS="$JAVA_OPTS -Xdebug -Xrunjdwp:server=y,transport=dt_socket;address=4142,suspend=n"right before the exisitng line
JAVA_OPTS="$JAVA_OPTS -Dprogram.name=$PROGNAME"I get the following error from the jboss console
=========================================================================
JBoss Bootstrap Environment
JBOSS_HOME: /usr/lib/jboss-4.0.3SP1
JAVA: /usr/lib/jvm/java-1.5.0-sun/bin/java
JAVA_OPTS: -server -Xms128m -Xmx128m -Xdebug -Xrunjdwp:server=y,transport=dt_socket;address=4142,suspend=n -Dprogram.name=run-debug.sh
CLASSPATH: /usr/lib/jboss-4.0.3SP1/bin/run.jar:/usr/lib/jvm/java-1.5.0-sun/lib/tools.jar
=========================================================================
ERROR: transport library not found: dt_socket;address=4142 ["transport.c",L138]
ERROR: JDWP Transport dt_socket;address=4142 failed to initialize, TRANSPORT_LOAD(509) ["debugInit.c",L500]
JDWP exit error JVMTI_ERROR_INTERNAL(113): No transports initializedFATAL ERROR in native method: JDWP No transports initialized, jvmtiError=JVMTI_ERROR_INTERNAL(113)I have tested that the debugger works on it's own by trying to debug a hello world app:
java -Djava.compiler=NONE -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,address=8000 hello and then attaching to it with jdb -attach localhost:8000.
Is this classpath issue?It looks like you have a semicolon between the name of the transport library and the address option - that should fix it :-)
-
Function not found in Library only after Close VI - Open VI
Hi,
We wrote subVI's for all exported functions of a dll written in Borland C++. Then a test.vi was implemented which uses these dll function. Everything runs perfectly, as long as we don't Close the vi and reopen it from the LabView main menu. If we do this the broken run arrow butten is shown and the first error message listed is the Function not found in Library error.
If we use Exit to leave LabView and then restart the test.vi, everything is ok.
Please let me know if you know a solution. Thanks in advance.The Function not found error is thrown when the OS can't provide the pointer to the function in the library to LabVIEW for some reason. For more information and common solutions see:
http://digital.ni.com/public.nsf/websearch/44E40ACF1644DB77862562990054D672?OpenDocument
The only reason I can think of why the first time it works correctly is that the DLL is not correctly clean-up by the close functions. Thus causing a second request for the pointer to fail due to this. (closing LabVIEW will remove the DLL form memory and thus probably clearing the error).
Hope this Helps
Kind regards,
Karsten
Applications Engineer
National Instruments -
Dear all
I try to interface my spectrometer (NIRquest from ocean optics) using labview on my 64 bits cumputer using windows 7.
I have absolutely no problem to run the spectrometer with the program dedicated to the spectrometer (called Spetrasuite).
I've installed "OmniDriverSPAM-1.66-win64-development-installer.exe" and everything went right.
When I select a VI in LabView (e.g."wrapper_create.vi") from the wrapper.llb, LabView returns an error :
"Call Library Function Node 'Wrapper.Create': Library not found or failed to load."
I chek the call library function, but everyting seems to be right :
I use LabView 8.6.1 and my others *.vi are running perfectly...
Do you have any idea from where does the problem comes ?
Thank you very muchHello Flanguy,
In addition to smercurio_fc's feedback I can confirm that LabVIEW 8.6.1 doesn't exist in 64-bit version.
Officially, LabVIEW 8.6.1 doesn't support Windows 7 either.
The minimal version of LabVIEW you would need to both support Windows 7 and exist in 64-bit version is LabVIEW 2009 64-bit or any 64-bit versions which are more recent.
In the two links (1 & 2) you can find more background information.
Kind Regards,
Wouter
National Instruments Belgium -
Call library function node: function not found in library
I'm using Labview 6.1 and Windows XP. I am trying to open some code, but it opens up with a broken arrow. The error is Call Library Function Node:function not found in library. Tried to configure the node, but no change. Moved the DLLs to various directories (keeping them together) but again no change.
This code has been compiled and is working fine. I'm just trying to run the source code to make some modifications. Any suggestions?
Thanks
CarlosVThanks for the suggestions. Tried it but had the same results. The library I'm using is hpe1413_32.dll.
One thing I forgot to mention....doing a configure on the node, it comes up with the library: hpvscp32.dll and the function: hpe1413_error_message
The function doesn't exist in the library. So I set the path to hpe1413_32.dll which does contain the function.
After closing the configuration window and opening it up again, the library shown is hpvscp32.dll
From what I can tell, there are three libraries involved:hpe1413_32.dll, hpe141332v.dll, and hpvscp32.dll
Thanks again.
Carlos -
Call Library Function - Function not found in library
Hello,
I am working with a .dll in LabView 5.1. I finished a little program that should give me the number of CPCI-cards in a PXI-machine. But now i always get the error messages "Call Library Function - Function not found in library". I know it is threated several times bfore on this forum, but i didn't exactly find a sollution that solved my problem.
The .dll is documented and i can see the function names by opening the .dll with Quick View. I have checked (a hundred times) the names i typed in and they are correct (=equal to manual of .dll and to Quick View, so we can skip that).
What else could be wrong? What can i do?
Regards,
Klaas Engels
studentI'm not sure if it's a reason, but once I had the same error. In my case the reason was in that DLL function was actually named with additional suffix letter "A", and then digging through MS documentation I've found an explanation that MS uses desired function with one or another suffix depending on usage contents and data type. Adding that suffix was solved the problem.
This was not obvios because in DLL description there was no mentions at all and function name was given generally, i.e. without any suffix at all, assuming every user should be MS guru.
Sergey -
I was trying to free up some space on my internal HD yesterday; I did trash what I thought were just contents from the iPhoto library. Today I get a message "Photo Library Not Found" when I attempt to open iPhoto.
In reading past posts here, there is a reference to "standard recovery procedure."
Can someone tell me what that is or what thread I might look at that will tell me the best way to proceed here?
I sure hate to think I've lost all my photos.
Thanks
LeeLee
You will get Time Machine with 10.5, but you can also purchase excellent back up apps like Chronosync, DejaVu without using 10.5. Also, if you purchase another external HD you can run your iPhoto (and your iTunes) from there, so freeing up space on your internal.
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD
Maybe you are looking for
-
IPhone 5 music playback issues (after iOS 8 upgrade)
Hi, After upgrading my iPhone 5 to iOS 8 I have had many playback issues with my Music. Songs randomly skipping or stopping without even doing anything are some of the issues. Also sometimes when I am listening to a song it would fast forward the mus
-
Can I print to different paper sizes with AirPrint and Safari?
I am the organizer of a trade show coming up. We are using a web based registration system for attendees. To print the attendee badges, we simply log in to the site through the net, and print them. I have an HP CP1525nw loaded with 3x5 index cards t
-
How to Install 11.5.10 on win2k Server with service 4
Hi can some body give me faire idea that how to install 11.5.10 on win2k server . I have done following actvities: created the stagearea(under 11.5.10 in c:\stage11510) 1. installed mks tool kit under c:\Tools\MKSNT 2.Vc++ under the directory c:\Tool
-
Help! How to pull data from a database into form
I have information store in a database and I need to import(place) it onto a form. The form already has a connection to the database, I just don't know how to update the information on the form with the information that is stored in the database. C
-
Hi All, We have requirement like don't want print checks in oracle, just process the payment, generate the document number(check number) in oracle and send the data file to third party system. It takes care the check printing. For this I developed Et