Library not fund lnavhoa
I have tuhis environment:
HP -UX 11.11 and rdbms 10.1.0.4.
in my $ORACLE_HOME/bin the hsodbc file is empy, why??
When I execute this: /usr/ccs/bin/make -f ins_rdbms.mk ihsodbc
I receive this error: Can't find library or mismatched ABI for -lnavhoa
Why??
Ok, the note describe this:
Part II: How to relink the HSODBC executable
(Everything done in this section is done as ORACLE user)
Most ODBC drivers are linked with a C++ compiler, but Oracle is still
compiled with a C compiler.
the HP homepage contains an article
Mixing C++ with other Languages for information on linking HP aC++ modules
with HP C
that describes in detail why the following steps are required. Please refer to
it if you need more background information.
The procedure for Oracle 9i with a C++ runtime version below A.03.30 is
Check out, if the following file exists:
/opt/aCC/lib/cpprt0_stub.o
If not, please follow this instruction to create it:
Create a file called cpprt0_stub.s with the following contents:
--- cut here ---
.code
; stubs for static constructors in a.out
.export __StaticCtorTable_Start,data
.export __StaticCtorTable_End,data
__StaticCtorTable_Start
__StaticCtorTable_End
.data
; stubs for static constructors in a.out, compiled with z/Z
.export __ZStaticCtorTable_Start,data
.export __ZStaticCtorTable_End,data
__ZStaticCtorTable_Start
__ZStaticCtorTable_End
--- cut here ---
(If you created the file on a PC, don't forget to transfer
the file in ASCII mode!)
Then compile it with the following command:
as cpprt0_stub.s -o ./cpprt0.o
But in I haven't aCC compiller, any idea??
Message was edited by:
user446744
Similar Messages
-
I get an error message that says "Dyld error Message: Library not loaded @rpath/ilifeslideshowcore.framework/versions/a/ilifeslideshowcore" the reason: image not found
Anyone have any idea how to fix this problem. I have reloaded the software from the original disk and have downloaded the latest update and still get the same error.Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT -
"The application iChat quit unexpectedly"; "Library not loaded"?
Whenever I try to launch iChat, I receive "the application iChat quit unexpectedly" error.
Neither "Relaunch" nor "Reset and Relaunch" fix the issue, and when I click "Report" and view the "Report Details" it gives the output enclosed below.
The gist of the error is "Library not loaded: /System/Library/PrivateFrameworks/ScreenSharing.framework/Versions/A/ScreenShar ing".
It also says "Reason: no suitable image found", but it also says it:
"Did find:
/System/Library/PrivateFrameworks/ScreenSharing.framework/Versions/A/ScreenShari ng: unknown file type, first eight bytes: 0x6E 0x61 0x6D 0x65 0x20 0x20 0x48 0x42"
I've removed and reinstalled iChat (when in Safe Boot -- with the Shift key) from Disk 1 of the Mac OS X Install disk 1 by using the "Optional Installs.mpkg" installer and selecting only iChat, but I still receive the same error.
How can I reinstall this "ScreenSharing" library? Would that likely fix the issue?
PS - I just realized that if I go to "System Preferences" and click "Sharing", the options are totally blank! I can't see any options or change any Sharing configuration! All my other System Preferences show up correctly.
So now the question becomes, how do I install just the "Sharing" System Preference?
Or should I try to reset permissions on the Sharing System Preference somehow?
Thanks!!
SEE FULL PROBLEM REPORT BELOW
Process: iChat [408]
Path: /Applications/iChat.app/Contents/MacOS/iChat
Identifier: com.apple.iChat
Version: ??? (???)
Build Info: iChat-6010000~3
Code Type: X86 (Native)
Parent Process: launchd [125]
Date/Time: 2008-08-15 22:04:31.645 -0400
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/ScreenSharing.framework/Versions/A/ScreenShar ing
Referenced from: /Applications/iChat.app/Contents/MacOS/iChat
Reason: no suitable image found. Did find:
/System/Library/PrivateFrameworks/ScreenSharing.framework/Versions/A/ScreenShar ing: unknown file type, first eight bytes: 0x6E 0x61 0x6D 0x65 0x20 0x20 0x48 0x42
Thank you!!
Message was edited by: NYCPhotoGuyNYCPhotoGuy wrote:
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/ScreenSharing.framework/Versions/A/ScreenShar ing
Referenced from: /Applications/iChat.app/Contents/MacOS/iChat
Reason: no suitable image found. Did find:
/System/Library/PrivateFrameworks/ScreenSharing.framework/Versions/A/ScreenShar ing: unknown file type, first eight bytes: 0x6E 0x61 0x6D 0x65 0x20 0x20 0x48 0x42
Note that the first eight bytes of a Universal-Binary Mach-O image should be 0xCAFEBABE, 0x00000002. Since the existing file was so vastly different, after all else is said and done, you may want to make sure your hard drive checks out okay in Disk Utility. -
GNU fortran 90 no longer works.
I get the error message:
gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
ld: library not found for -lcrt1.o
collect2: error: ld returned 1 exit statusGNU fortran 90 no longer works.
I get the error message:
gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
ld: library not found for -lcrt1.o
collect2: error: ld returned 1 exit status -
I Changed permissions for every enclosed folder in my Library (not Home)
I wanted to change permissions on a fiie in my root Library (not Home Library) and clicked apply to enclosed items for the entire Library folder. Once I realized what happened (after the fact) I tried to repair permissions but things aren't working right obviously. I have a backup of the Library on my Time Machine drive that is before the snafu.
Is is possible to restore just this Library folder, and if I restored just this folder using Time Machine would it also restore the permissions as they were before I screwed up.
I'm backing up the altered Library folder to another drive just to be safe if I do need to restore.
Always learning,
Thanks
Message was edited by: Thor StevensThor Stevens wrote:
I wanted to change permissions on a fiie in my root Library (not Home Library) and clicked apply to enclosed items for the entire Library folder. Once I realized what happened (after the fact) I tried to repair permissions but things aren't working right obviously. I have a backup of the Library on my Time Machine drive that is before the snafu.
Is is possible to restore just this Library folder, and if I restored just this folder using Time Machine would it also restore the permissions as they were before I screwed up.
no, that's not possible because many of those items are in use while you are booted normally. you need to do a full system restore from TM from before you did this. from your last post you seem to be doing just that. and in the future NEVER ever use "apply to enclosed items" on ANY system created folders. that applies btw to things like your home folder, the library in your home folder, your desktop folder etc. use it only on folders you made yourself. apart from messing up permissions on system files like those in the root library, many system created folders like your home folder have hidden ACLs and using 'apply to enclosed items" propagates those ACLs to everything inside.
I'm backing up the altered Library folder to another drive just to be safe if I do need to restore.
Always learning,
Thanks
Message was edited by: Thor Stevens -
Process: iTunes [1180]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [128]
Date/Time: 2011-10-15 14:03:26.959 -0500
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 173475 sec
Crashes Since Last Report: 17
Per-App Crashes Since Last Report: 14
Anonymous UUID: FBE53514-43A0-44F2-8224-C1544A10966F
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_dsp.1.9.1.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.48f2
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK5055GSXF, 465.76 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000 / 3
WHAT IS THIS?????????Hi kitmaguire,
If you are receiving an "audio configuration" error message in iTunes on your Windows machine, you may find the following article helpful:
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/ts1371
Regards,
- Brenden -
Hello,
After trying to change my printer settings on CUPS administrator area to allow to share my wirelless printer to my VirtualBox environment (somehow virtualbox doesn't detect my wirelless printer) I notice that this area stop to work. After it I try to update the CUPS by installing a new version. I admint that I am a newby in unix environment and I downloaded the CUPS v1.6.1 and installed through the terminal,
./configure
sudo make
make install
After restarting apple site no longer opened like also my home page. Other programs also stopped working and always warn about the same error described bellow. I posted my last try which was reinstall my system Snow Leopard (Mac OS X 10.6.8). Does anyone deal with this problem before? How can I reinstall at least the operation system or just fixing this library will solve the problem?
Note: The reason of using virtualbox is that I need to use a prescribed software that only works in windows environment and since I need to make work in other places the wireless printing is the only viable way to do this.
Process:
Install Mac OS X [58962]
Path:
/Volumes/Mac OS X Install DVD/Install Mac OS
X.app/Contents/MacOS/Install Mac OS X
Identifier:
com.apple.installassistant
Version:
Build Info:
InstallAssistant-480000~1
Code Type:
X86 (Native)
Parent Process: launchd [207]
Date/Time:
2013-02-11 01:18:18.198 +0000
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:
48784 sec
Crashes Since Last Report:
10094
Per-App Crashes Since Last Report: 9
Anonymous UUID:
D1A4D697-3F20-4799-9396-A5CEDA61BC62
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /usr/lib/libcups.2.dylib
Referenced from:
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/P rintCore.framework/Versions/A/PrintCore
Reason: no suitable image found. Did find:
/usr/lib/libcups.2.dylib: mach-o, but wrong architecture
/usr/lib/libcups.2.dylib: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4163b dyld 132.1 (???)
<4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core
2 Duo, 2.26 GHz, 2 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D),
Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MJA2160BH FFS G1, 149,05 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N, 7,24 GB
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403,
0x26500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.),
0x8213, 0x06110000 / 4
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.),
0x0237, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2andHere is another option.
I had the same problem with my Mac OSX System 10.8.4 after update cups from 1.6.2 to 1.6.3.
I have a MacBookPro with the same system version and copy the libcups.2.dylib file form /usr/lib/ then replace the error file in my other Mac.
1. Install cups 1.6.2 again
2. Replace the file libcups.2.dylib in /usr/lib/ directory with this one libcups.2.dylib
Note: I added the link if you dont have an other mac in the same version available.
This works for me. -
Excel ActiveX error in exe: library not registered
Hi,
I wondered if any of you can help me as I'm at a bit of a
loss. I have an application that is complied to exe, and installed with
an installer in LabVIEW 8.5.1 that uses the Excel ActiveX interface to
write to an xls file. In development and on all of my testing this
seems to work fine (with Excel 03 and 07) but I have just received a
bug report whereby on a particular install the following error has been
thrown form my Open Excel VI (see attached code). Apparently it was
working but this machine has recently upgraded some data management
software (Goldmine 6.0 -> 7.5) and since then it hasn't worked. The error generated is:
Error code:-2147319779
source: "Library not registered."
Troubleshooting
is complicated a little as this is running as an exe and the source
code seems to work fine on my development machine.
Any ideas would be GREATLY appriciated!
(my current inclination is to ask the customer to resintall Office and
Goldmine and then reinstall the LabVIEW app - so far he has only tried
reinstalling the LabVIEW software)
Shaun
(this message is also posted on Lavag.org = http://forums.lavag.org/Excel-ActiveX-error-in-exe-library-not-registered-t11912.html)
Attachments:
Open Excel.vi.png 52 KBIt would really help to see the relevant code, and to know which version of LabVIEW is being used. I notice the original code was developed on LabVIEW 8.5, and the Poster mentions older versions of Office (and is writing an .xls instead of an .xlsx file), suggesting the original code is about 7 years old.
About 4 years ago, I got frustrated with trying to use ActiveX, and NI developed a much more robust Report Generation Toolkit. I've adopted the RGT and haven't looked back. Most of the weird errors I used to fight are gone, and building executables is (mostly) no pain (there's a small glitch that required manual OK-type intervention when you first encounter the Toolkit in a Build). I'm guessing that it should be pretty easy to rewrite your code using the RGT in place of ActiveX, and I'm willing to help ...
Bob Schor -
Apps in library not available for syncing
I've searched and searched but can't seem to figure out this problem.
There are some apps in my iTunes library that I had purchased on my iPad and I want to put them on my son's iPod touch. But when I plug in his device those apps don't appear on the sync list for his device. No matter what I do I can't seem to get those apps on the list, which means I can't get them on his iPod. How do I solve this problem?I see all my smart albums in iTunes when I sync the iPad. But sometimes iTunes is confused about the current library. I have several iPhoto and Aperture Libryries, and I noticed that iTunes sometimes still tries to sync the previously opened library, not the most recently opened one. To be able to tell which library iTunes is showing, I name one of the projects exactly like the library. So I can tell easily, if iTunes is syncing an older copy of the library.
For example a small test library named "iPhoto Library" containing one smart album:
Regards
Léonie -
Iphoto wont open - library not loaded
I recently had an issue where both Aperture and iphoto couldn't load, the message said "iphoto cannot be opened because of a problem" and then I got the error message below. It didn't even load the app, but bounce it once and then post the error message
Had a poke around, but cant for the life of me figure out why it cant see the Library. I have repaired permissions and tried others, but still not working.
Am i missing something really simple?
Thanks in advance
Process: iPhoto [259]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-6050000~2
Code Type: X86 (Native)
Parent Process: launchd [153]
Date/Time: 2011-04-28 18:58:25.013 +0100
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: 513 sec
Crashes Since Last Report: 1384
Per-App Crashes Since Last Report: 2
Anonymous UUID: E4F09B2F-D421-4862-922E-5DCA26A5887E
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.37f3
Graphics: NVIDIA GeForce GT 130, NVIDIA GeForce GT 130, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD1001FALS-40K1B0, 931.51 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1005, 0x24300000
USB Device: hp LaserJet 1300, 0x03f0 (Hewlett Packard), 0x1017, 0x24310000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x021e, 0x24320000
USB Device: Ext HDD 1021, 0x1058 (Western Digital Technologies, Inc.), 0x1021, 0x24100000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000See this line above:
/Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
That piece of support framework needed for iPhoto can't be found or is broken.
Try re-install iPhoto
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
If that doesn't help you need to reinstall the OS
Regards
TD -
Error message "Library not loaded"
I had a new (and larger) disk drive installed in my MacBook Pro, and all the files were copied over. Yet, when I try to open iPhoto, it gives error message that library is not loaded and it will not open (full error msg below). Yet, when I go to the Pictures folder, the iPhoto library is right there. I tried getting rid of the preferences file and that did not help me start up iPhoto. I was also not able to start up iPhoto with the option key so I could reconnect the library.
Suggestions would be welcomed.
Full error message:
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not founddoesn't works !
Process: iPhoto [695]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-4190000~4
Code Type: X86 (Native)
Parent Process: launchd [579]
Date/Time: 2010-03-28 08:12:33.656 +0200
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Interval Since Last Report: 87811 sec
Crashes Since Last Report: 14
Per-App Crashes Since Last Report: 13
Anonymous UUID: D2E16F70-7B07-4C41-8B57-128B725F3AF9
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/CoreAudioKit.framework/Versions/A/CoreAudioKit
Referenced from: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/Framework s/iLifeSlideshowProducer.framework/Versions/A/iLifeSlideshowProducer
Reason: no suitable image found. Did find:
/System/Library/Frameworks/CoreAudioKit.framework/Versions/A/CoreAudioKit: unknown file type, first eight bytes: 0x4B 0x95 0x0A 0x03 0x14 0x03 0x9B 0xAB
/System/Library/Frameworks/CoreAudioKit.framework/Versions/A/CoreAudioKit: unknown file type, first eight bytes: 0x4B 0x95 0x0A 0x03 0x14 0x03 0x9B 0xAB
I think the Framework is gone ...
there are only 21 framewoks in the folder. -
Hello all,
I am working with a MacBook purchased in 2009, OSX 10.6.8, processor: 2.13 GHz Intel Core 2 Duo, Memory: 2 GB 800 MHz DDR2 SDRAM.
I recently downloaded and tried to install a game I had previously successfully installed from Gamehouse.com. The download goes fine, when I open the .dmg file the correct window pops up with an icon to double-click to start installation. At that point I receive an error message (see below). I contacted Gamehouse and ran through a number of solutions they gave me, including uninstalling and removing all traces of this or any other game from my computer (including .plist files), installing any available updates (iTunes finally got that update I've been postponing for months...), and dragging the installer icon into various different locations before opening. All to no avail.
It appears to me the issue is this line in the error message: "Library not Found: /System/Library/Frameworks/StoreKit.framework/Versions/A/StoreKit"
I checked the Frameworks folder and there is nothing there called StoreKit.framework, so that seems to make sense. It isn't anywhere else in the computer either. After a quick google I found this problem pops up now and then - there is one other question on the same issue in this forum, but I have no idea if the solution given there works, as the original poster never came back. Their suggestion was to try reinstalling Just OSX from the boot disc. I haven't attempted this yet - I thought I'd see if I can get any input before going that route.
Thank you for any advice. Here is the full error report:
Process: Delicious - Emily's Wonder Wedding [349]
Path: /Applications/Delicious - Emily's Wonder Wedding Premium Edition.app/Contents/MacOS/Delicious - Emily's Wonder Wedding
Identifier: com.mrgoodlivng.delicious8.mac
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [91]
Date/Time: 2014-08-10 14:33:56.929 -0500
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 201860 sec
Crashes Since Last Report: 18
Per-App Crashes Since Last Report: 21
Anonymous UUID: 750B56F7-4793-44CA-847D-5A35F9F8DABC
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/StoreKit.framework/Versions/A/StoreKit
Referenced from: /Applications/Delicious - Emily's Wonder Wedding Premium Edition.app/Contents/MacOS/Delicious - Emily's Wonder Wedding
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <749D24EE-54BD-D74B-D305-C13F5E6C95D8> /usr/lib/dyld
Model: MacBook5,2, BootROM MB52.0088.B06, 2 processors, Intel Core 2 Duo, 2.13 GHz, 2 GB, SMC 1.38f5
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHZ2160BH FFS G1, 149.05 GB
Serial ATA Device: HL-DT-ST DVDRW GS22N
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000 / 3
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0229, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2That file is a OS X system file, you'll have to overwrite OS X with a new copy to restore it.
First things first
Emergency backup procedure
Drag and drop copy your users file folders (music, pictures, documents etc) to a regular external powered drive as soon as possible.
Do not use, setup or trust only TimeMachine at this troubled time as it will copy corrupted data and we need just your users files safe just in case. TimeMachine cannot be used with a Windows PC.
Unmount and Disconnect all external drives once the backup process is completed.
Note:
If you have any over 4GB sized files, those won't copy to a standard formatted FAT32/MSDOS drive from the factory, if you need to save these 4GB+ files use another blank/empty drive and use Disk Utility to format it 1 Partition, Option: GUID, Format: OS X Extended Journaled (or the standard default one for older Mac's).
Mac's cannot copy to nor format a NTFS drive. ExFAT format to be used with a Windows machine must be right click formatted by Windows, not OS X (does it wrong) XP machines can install a free exFAT update from Microsoft. Vista-Win 8 can format exFAT.
Formatting a drive will erase all data on it.
Once your files are safely copied off the machine, next run through this list of fixes, I suspect #8 Reinstall Just OS X + Software Updating fully should restore the broken/missing file.
..Step by Step to fix your Mac
Overwriting OS X with a new copy does not delete most programs or users files, but you backup your users files regardless as it might be something more than we currently know at this time. -
Fcpx editing error, library not open
Fcpx editing error, library not open,The backup file is not open。
I suggest downloading Digital Rebellion's Preference Manager and using it to delete your preferences.
If that doesn't solve the crashes, create a test library by holding down the option key when you launch FCP X and see whether it is possible to work normally in that library.
Rus -
iphoto does not open after software update.
i am using MAC OS X 10.6.8
it says: library not loaded,...reason image not found
EXC BReakpoint (sigtrap)It's missing background frameworks:
Library not loaded:/library/frameworks/ilifepagelayout.framework/versions/a/ilifePageLayout
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
Library not loaded when osx start with single mode
Description:
Product:Mac mini
os:mac os x 10.7.5
step1. For app software testing,the follow files was moved from /usr/lib to / .
libcrypto0.9.7.dylb
libcrypto0.9.8.dylb
libcrypto.dylb
step2.restart os
Problem appear: the gray screen appear a long time with apple icon
step3.then, i restart machine to single mode by command+s
The note appear:
com.apple.launchd 1 com.apple.launchd 1 ***launchd[1] has started up.***
com.apple.launchd 1 com.apple.launchd 1 ***verbose boot,will log to /dev/console.***
dyld:library not loaded: /usr/lib/libcrypto.0.9.8.dylib
Referenced from:/System/Library/PrivateFrameworks/DataDetectorscore.Framework/Versions/A/D atadetectorscore
Reason:image not found
step4. i guess that problem would be fix when i recovery the files of above. then i log in recovery mode(hold Option before gray screen appear)
#use terminal ,copy file to its old position.
-bash-3.2# cp /Volumes/mac/libcrypto.0.9.8.dylib /Volumes/mac/usr/lib
#have not note found ,the command sentence is done! maybe its success!
restart to verify,work!
Hope this post could help someone! that's only .If you specify the (absolute) path then the profiles.ini file isn't used and installation scopes might be different.
*http://mike.kaply.com/2012/02/21/understanding-add-on-scopes/
*https://developer.mozilla.org/Addons/Add-on_Manager/AddonManager#Installation_scopes
Maybe you are looking for
-
KT4V and FSB133 a nogo combo?
I have an AMD Athlon XP 2200+ (1.8ghz) CPU [with 256mbytes of PC2100 266mhz DDR Ram] I also have an MSI KT4V MB (latest Bios). The Motherboard defaults to 100mhz CPU FSB and the Computer is stable as can be but the MB only sees the CPU as an AMD 1500
-
How to sync the contacts in icloud
if i add a contact in icloud in my pc i am able to find it in my iphone. but if i add a contact in my iphone i could'nt see that in icloud. and i have imported 250 contacts through my sim card and i have saved some 100 contacts manually in my phone.
-
Could someone recommend a good and free web content editor? Best regards, Gabriel.
-
I'm trying to download songs that was transferred via Carbonite, not getting message that states "Unable to check for available downloads, iTunes is temporally unavailable". What do I do? Any suggestions??
-
Elitebook 8530w overheatin​g, CPU TEMP over 105 degree C
Hi, Is there any one had this problem ? My 8530W always thermal shut down when I run heavy CAD work. I use software to detect my cpu core temp, and it report over 105 degree C before shut down. Does any one know the repair center in Sydney that I can