Library Panel Is Blank

Hello, all.
When I open Encore, there are no Menu Templates in the Library Panel.
How do I get them?
Thanks, Jason

Jason,
I do not have CS3, so the info that I am about to give might not be exact. In CS2, the "Functional Content" for Encore is on Disc 4. There is an installer in that folder, that should be launched. It will then find (unless you have placed CS3 into a non-default location, and you should be able to locate that) your installation and install to that. Exact location in CS3 might be different, but you should be able to find it on the respective DVDs.
Now, some have experienced problems with Vista-64bit and XP-64bit OS's. A few things to consider: turn off all AV/spyware, etc. software first. Are you logged in as an "administrator?" Make sure no Adobe programs are running. If you have problems, you might try installation in Safe Mode. Some have had luck with a "Repair" installation, which should be accessible using the Disc 1 installation.
If anything fails, then John's reply is the next step. Adobe installation support is free and they can work through most problems.
I wonder why the Functional Content did not automatically load.
Hunt

Similar Messages

  • Project Library panel blank, unable to create a new project

    As it says. Using iMovie 08, my Project Library panel is blank, even if I start the program by double-clicking an existing project in the finder. If I choose to create a new project, it gives me the options (choose aspect ratio, enter name), but no project appears in the Library.
    The program has worked in the past. I've tried deleting the iMovie app and re-installing to no avail.

    Okay, finally fixed this. After viewing the log in the Console application when opening iMovie, it identified an iMovie data file located on an external HD as being a problem:
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Volumes/Daddy's HD/iMovie Events.localized/PatrickStuff120307/iMovie Data
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    I'm not sure exactly what this means, but sending that file to the trash fixed the problem and the Project Library is functioning normally now.

  • Panel tab shows up, but panel is blank

    Hello Everyone,
    I've created a File Info for CS5 panel using the generic panel.  As I've been working on it, it shows up just fine on my workstation.  The panel's folder has been distributed to three other workstations, and on two of them only the name on the panel's tab shows up and the panel is blank.  On the third one, it shows up just fine.  The panel folder has been placed into "Macintosh HD:Library:Application Support:Adobe:XMP:Custom File Info Panels:3.0:panels" on every workstation.  All of the workstations are Mac's.  All of the Mac's have the same OS and up to date CS5 installations.  I think I'm overlooking the obvious and I just don't see it.
    Any help would be greatly appreciated.
    Thanks!
    -Dave

    Hi Dave,
    from what I read I guess that you have distributed the panel, but not the Flash Player trust file to the workstations.
    It has to be installed (or manually created) on each workstation in the path:
    /Users/<username>/Library/Preferences/Macromedia/Flash
    Player/#Security/FlashPlayerTrust
    You create a text file "MyTrustFile.cfg" which contains your panel path in a single line (using slashes, not colons).
    You can find more details in our SDK programmers guide.
    Hope this helps,
    Stefan Makswit

  • How to Add a page Item in Indesign Library Panel

    Hi All,
    I am trying to add page Item in Indesign Library Panel using
    ILibraryCmdUtils::ProcessLibraryAddItemCmd()
    But it shows the message of Heap corrupt while processing the commmand.
    Can any one help me out with some code snippet ?
    Pete. M. Mitchel

    Hi,
    Iwas also suffering fro the same problem.
    Better to use "ILibrarySuite::DoAddToLibrary()" method.
    Hope it will help you.

  • How can I get my Albums back at the top of the Library Panel?

    I recently upgraded to 3.3.2 and among the many new and sublty annoying features, all the smart albums which I created and which used to be at the top of the Library panel now appear at the bottom below the Projects.
    Why someone thought this should be moved is beyond me... and I am hoping there is a way for me to bring it back to the top.
    In some of my Aperture libraries I have literally hundreds of projects and rely on smart albums to quickly organize photos across them. Having to scroll to the bottom of the pane is a pain!
    Does anyone know how I can bring the ALBUMS back to the top of the Library pane?

    Create a folder (new Folder), call it "My albums" or similar, and drag it to the top of your projects section in the Library Inspector panel.
    Then drag all your albums there.
    You will have to set the projects to be arranged manually, or let the name of this folder start with a character that bring it to the top, if you want to sort by name.
    Regards
    Léonie

  • Image Preview in Library Panel

    Hi Guys,
    I have been having trouble trying to figure out about the live previews of the widgets. I created a widget and it works perfectly but how can I make the preview appear in the library panel and not the muse home page. Here's an example of one that musethemes.com did. The preview has come up on the right hand side panel but when dragged onto the canvas, it dis
    it disappears and the live preview of what it would look like on the webpage appears.
    Thanks in Advance,
    Daniel

    Hi Daniel,
    This help article explains how to get custom thumbnails in the Muse Library panel

  • Can't drag color swatch from new Library panel

    Hello all,
    I just began using the new Library Panel. I sampled 3 colors in PS, added them to the new PS Library panel. Then switched to Illustrator CC 2014 and viewed the Library there. Sure enough, the colors from PS were there.
    I tried to drag the Library swatch to Swatches panel and it refuses to drag and drop. There is no "move to" nor "copy to" command anywhere I can see in the panel menu button.
    What am I missing here?
    Mike Witherell in Maryland

    It's a work in progress. You may add a feature request.
    Adobe - Feature Request/Bug Report Form

  • Bridge Output panel is blank in right-hand window

    After opening the Output panel in Adobe Bridge CS5 the right hand panel is blank...nor PDF button, no formatting options....nothing. I've tried several times to reinstall the output module without success. Any suggestions?
    Francis Guinan

    If it worked before and you have changed nothing I would reset the preferences.  Close Bridge then hold down the CTRL key and start Bridge.  You should get a reset window with 3 optons.

  • No Library Panel in Window Menu CC 2014

    I downloaded several CC 2014 programs hoping to use the new library panel. There is no library panel in the window menu for me to select when I try to in both Illustrator and Photoshop. I have CC 2014 programs on my computer at work and the library panel shows up just fine there. I can't seem to figure out why I can't do the same thing here at home.

    Hi riverstoneannie,
    Kindly check if your software are up to date, refer: http://helpx.adobe.com/creative-cloud/help/install-apps.html#Update apps.
    If the software are update to date then try the below mentioned steps.
    Launch Photoshop
    Click "Windows" from the menu bar
    Select "Libraries" from the drop-down menu
    Thanks,
    Atul Saini

  • I can't see or import media in media library panel.

    Howdy,
    I'm sure this is the simplest thing ever and just a button, but my media is not showing up in the media library panel and when I try to drag and drop into to it I get the Ghostbusters red circle with the line.
    Any tips amigos?
    Thanks!

    Navigate to your files/clips in Media browser, select one or more, right-click, "Import" ... then drag & drop from the Project panel to the sequence area. Is this what you need? Media browser is to find files to import ... after you officially import them WITH the media browser, you can use them from the Project panel.
    Neil

  • Library Panel Missing in Muse

    The library panel is completely missing; it's not just hidden. I'm on the newest version of Muse, just updated today, so that might have done it, but I'm not sure.
    Here's a screenshot:

    No the widgets library is there; just the "Library" panel is missing. Here's another screen shot:

  • LIBRARY panel missing in Illustrator CC

    I'm trying to use the CC Libraries in Illustrator. I've looked at the tutorial about it, but there is no Library panel showing in the Windows list. It should be under the Layers panel, but it is missing.  Why?
    CC Libraries in Illustrator | Adobe Illustrator CC tutorials

    Thanks for the prompt response Gary! Yes! I have logged out - logged in again and have done that repeatedly. I have however just a few moments ago uninstalled another version that was on the machine (cs6 beside the CC 2014 v18.0) and after logging out of CC (Via the Illustrator in-App Menu | Help | Sign out... ) I then restarted my machine and now the CC app icon in the menu bar is greyed out even though it propted me to log into CC which I did.? Thanks again.

  • Bridge CS5 "output templates" no longer loads; the output panel is blank. Where is the script?

    Bridge CS5 "output templates" no longer loads after my system back-up; the output panel is blank.
    The other Workspace features appear to be functional.
    What/Where is the  output script supposed to be? 

    If it worked before and you have changed nothing I would reset the preferences.  Close Bridge then hold down the CTRL key and start Bridge.  You should get a reset window with 3 optons.

  • Inbox message panel is blank, but I know that messages have been received

    I am able to send messages, and receive them, but I can't see the received messages. My POP3 inbox message panel is blank yet the Inbox indicator at the left says 10 messages. I can hear new messages come in, but I can't view them. I repaired permissions, but that didn't work. I can see them on my MBP, but not on the desktop iMac. Advice please.

    I am unable to rebuild the mailbox (greyed out) or solve the problem. However I did a workaround by creating a new mailbox and directing messages to it via a rule. Apparently no one else has had this strange problem with no apparent solution.

  • Unable to open a new library panel

    For some reason I am not able to close library panels I've
    opened. I close
    them all and I still get the message "Unable to open a new
    library panel. The
    limit of ten open library panels has been reached." I close
    the panels and
    still I am not able to open a new library panel. I close the
    MAIN library
    panel and then reopen it and all the previous extra library
    panels open. Am I
    missing something in the closing of the Library panels? INtel
    iMac, OSX
    10.5.4, Flash CS4.

    I have this problem too on Windows Vista.
    Any solution?

Maybe you are looking for

  • How do I delete loads of calendar events at the same time

    I Have no idea how, but my entire school timetable has somehow appeared on my calendar throughout the entire of December this year and late November. I can't delete them without having to individually delete all 9 events on every day, and there're ab

  • Slow Macbook Pro 2011

    Since couple of months i'm experiencing a very slow system. 5 seconds to open up Finder.  10 seconds to open a picture...  etc... here's a couple of lines from the console log  ( upon opening the console i also experienced a spinning beachball) 1/03/

  • Left external speaker stopped working

    Left external speaker stopped working, right works fine. When I connect headphones, they work fine. Have tried two different sets of speakers, deleted plists and reset pram. Please help!

  • Scroll bar disappears when screen scharing

    When screen sharing between my iMac (10.9.3) and my Mac Mini (10.9.3) the scroll bar in most (many? all?) applications disappears. With the finder, if one resizes a column, the scroll bar will reappear. With Preferences, such as iCloud, there is no w

  • TCL or EEM scripts to do TDR testing via SNMP?

    Does anyone know of any EEM or TCL scripts to do TDR testing via SNMP?  Is it even possible?