Library shortcut not showing up after Connect to Office in SharePoint 2010

I clicked "Connect to Office" in the library ribbon. The shortcut to the site showed up under Favorites in window's explore.  But the library is not showing up. 
The browser is IE 9, 32 bit.
any idea why the library shortcut not showing?

Hi, 
According to your description, after Connect to Office, The shortcut to library is not showing up under SharePoint Sites.
I have met the same issue with you, and I solved the issue by the following:
Delete SharePoint Sites under Favorites in window's explore and go to C:\Users\Your user account, delete the SharePoint Sites folder. 
Go to  Connect to Office-> Click Manage SharePoint sites-> Delete all the library links.
Go to  Connect to Office-> Click add to SharePoint sites again and check the result.
If the shortcut to the site doesn’t show up under Favorites in  Windows explore, 
go to C:\Users\Your user account, copy the SharePoint Sites folder, paste it into Favorites in Windows explore. 
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact 
[email protected]

Similar Messages

  • One calendar view does not show up when configure calendar overlay in sharepoint 2010

    I created 5 views for a calendar and wanted to create a calendar overlay to show all 5 views.
    Events 1
    Events 2
    Events 3
    Events 4
    Other events
    but one view named "Other events" is not showing up when selecting view from "calendar" list.. (only the other 4 views are shown)
    I checked that the view is created correctly and listed in views section in list settings.
    Don't know why ?
    Appreciate any advice

    Hi,
    According to your post, my understanding is that one of your calendar view didn’t display when configured the calendar overlay.
    Was the “other events” view created by the Calendar View format?     
    You can only select the view created by the Calendar view format when you configure the calendar overlay.
    I had tested with five view as your description, they are all the calendar views, and all the views could display when I configured the calendar overlay as below.
    You can recreate a new view or a new calendar, then check whether it works.
    There is an article about creating Calendar Overlay, you can check with it.
    http://deannaschneider.wordpress.com/2011/09/28/calendar-overlay-a-simple-sharepoint-2010-ootb-master-calendar/
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Imovie 8 project library thumbnails not showing up after import

    I have imovie 8 on my mac at home and I edited some footage and then wanted to bring it into work. I copied all the necessary event libraries and project libraries and I'm having a problem viewing them in my imovie 8 at work.
    I stored the Event library files on my external hard drive, since I don't have enough room on my internal drive, and copied over the project libraries into my imovie folder. After copying everything over I can see my event library raw data in imovies viewing pane. The project library file names are visible, but when I click on them to view I get a greyed out thumbnail with an exclamation point. It says "This media's files are currently not available"
    Can anyone shed some light on this. I want to be able to edit the projects I created at home.
    Thanks

    All I've got is imovie 3, and i'm making a full-length dvd/video for a senior project... The project library file names are visible, but when I click on them to view I get a greyed out thumbnail with an exclamation point. It says "This media's files are currently not available"
    This should be expected. Projects use absolute resource references, therefore, unless you "clone" the exact drive/path names between original project files and original resource files from the home computer and replicate it at work, you have "orphaned" your resource files.

  • My library will not show up in Itunes after moving library

    I moved my library folder from my C drive (my primary drive) to my D drive because I was running out of space on my C drive. I did this through My Computer and not through iTunes. Then, my library does not show up in iTunes.
    I moved the folder back to my C drive and everything, but to no avail. I read the tutorial on the Apple website called "Moving your iTunes folder," and I read the first 1,000 or so posts and nothing really solved my problem. There were other posts that were sort of related, but my case differs in that I moved the folder back to the same place it was before and nothing showed up.
    This happened before, and I was able to fix it. I thought I did the same thing again, but apparently not, since it's still not showing up. I tried every imaginable thing. I looked at under preferences, advanced, and then made sure the iTunes music folder was the same as the one I had my files in. Still, nothing is showing up. I know where my files are and everything, but iTunes acts like no files were even imported.
    I have tried importing songs into iTunes, but it doesn't show up on iTunes, so that rules out importing my files again.
    Please help me. I really am at a loss of what to do. Thanks so much!
    Yours, Al
    2005 Acer TravelMate 6000, 39.2 GB   Windows XP   iTunes version 7.01.8

    hey.
    finally somebody with the same problem! i bought a new external drive because i was running out of space and backed up my entire library. then my computer crashed and i wanted to take advantage of a clean drive and not add my whole library back onto my computer. i'd love to be able to access my music folder on the external and have that show up as my library on iTunes when connected...
    i followed all the steps as closely as possible and am pretty confident that my advanced preferences in iTunes are correct, but the library does not show these songs from the external drive. have you had any feedback or figured it out on your own?! i hope so, i'm at a deadend.

  • My itunes library does not show up in apple tv

    I am using a Dell computer and my itunes library does not show up in my apple tv under computer.  I am sure I just need to change settings in my computer to allow access to apple tv but I do not know how to do that. Any help?  My apple tv has internet connection. Thank you

    Welcome to the Apple Community.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen.
    If you want your purchases to download automatically in future, enable automatic downloads at iTunes > preferences > store.

  • Why is it not showing anything after I plugged in my USB hard drive? I cannot locate the drive in my macbook. FYI this happened after few times using it.

    I need help as I am new to IOS.
    Currently it is not showing anything after I plugged in the hdd to my mac book.

    I had the same exact issue, which you can see in another forum.
    I "killed" both my MBP and my wife's MBP by plugging in my iPhone and getting a  message about USB drawing too much power.
    It was not fixed by using an SMC reset.
    I DID fix it by unplugging the battery, I left it unplugged long enough to remove the RAM, HD and put some RAM and HD back into place. (I initially swapped the RAM and HD from my MBP into my wife's MBP.
    After that everything was good, although upon first boot, some apps crashed because of the "system date" being set to a date before 2000. I forget the exact date, but it will be some time in 1984, the birthdate of the Macintosh. It is not a big issue, just correct the date and time.
    If you are curious about that date, copy a large file on your drive and look at the CREATED/MODIFIED date....it will show this same date, until the copy is complete, at which time you will see the correct one.
    Once again, try to disconnect your battery, very carefully by lifting up the connecter evenly on both sides to avoid damaging the connector or the board.

  • ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs

    ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs. Setting up the connection has been a hit and miss. Have tried both x86 and x64. Any ideas?  Use ODBC from the control panel and C:\Windows\SysWOW64 same results. Using
    SQLexpress 2008r2
    Thanks

    Hello,
    Please consider to configure Windows Firewall or disable it. Not only Windows Firewall but any security software.
    https://msdn.microsoft.com/en-us/library/cc646023(v=sql.120).aspx
    Windows Firewall is enabled by default.  
    Make sure you are using SQL Server Native Client to create the ODBC DSN. Not all Windows versions have it, so you may need to download and install it.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Apps showing in library but not showing up in devices i pod- sync apps list. ...pls help

    apps showing in library but not showing up in devices i pod- sync apps list. ...pls help
    id: [email protected]

    Are the apps checked to be synced to the iPod and did you click on the sync button in Tunes?
    Were the apps purchased fro the same accoubnt signed into in the iPod?
    Are the apps compatible witht he iPOd model and iOS version?
    Do you have restrictions set that prohibit instaling apps?

  • OHS 11gR1 web-page not showing up after creation, registration of webgate

    Hello there,
    The OHS webpage on host:7777 is not showing up after I created, registered the webgate on oam 11g console. I copied the 2 artifacts into the ohs proxy server box in the webgate/config folder and restarted OHS instance but now, the ohs page won't show up. The opmn status says its alive but it doesnt show up in the browser.
    I have oam 11.1.2 installed with webgate 11.1.2 and ohs webtier 11.1.1.6.0. Am I missing any step? Do I need to create a authentication scheme before I check it? Please advise to the earliest convenience.
    Thanks!!

    Hi,
    You need to create authentication scheme. also create resourse for index.html page in OAM console and add it to protected resourse list. So when you will access OHS with 7777 port it will redirect to OAM SSO page, after successful login it will take you to the home page of OHS.
    mark, if this helps.
    Regards,
    Kishore

  • Some songs from my iTunes library do not show in my Finder music folder

    Some songs from my iTunes library do not show in my Finder music folder. For example one of the three CD's form a triple album do not show in Finder. And therefore they do not get saved when I back up my Mac either. Any ideas?

    Consolidate ("organize") simply looks at everything you have in iTunes and copies them to the iTunes media folder location specified in iTunes prefs -> Advanced.  If you select to use the default settings iTunes will copy any files in its library in the correct location in the media folder.  Since you don't want the files in a different locaiton really but just want to deal with some stragglers don't do the full "move" in hte instructions below but make sure they are organized.
    iTunes 11 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH12165
    The files will be copied so you will need to find the originals abd once you are content the library is working you can get rid of them (I often archive them on an external drive, delete the originals, then play the files which is a sure test if you have a workable copy on the computer).

  • Not showing a secure connection

    in firefox 4 its not showing when im connected to a secure connection like in previous versions

    The padlock has been replaced by the site identity button, for details on using it see https://support.mozilla.com/kb/Site+Identity+Button
    If you want to add a padlock icon to the location bar, you can use the Padlock add-on - https://addons.mozilla.org/firefox/addon/padlock-icon/

  • Itunes library will not show new music

    Since downloading itunes 11 my library will not show newly downloaded music. That includes music that was purchased from the itunes store. Has anyone else had this issue?

    Some people have had success with turning off iTunes Match or logging out of the itunes store and logging in again

  • The templates are not showing up after I select them???

    the templates on pages are not showing up after I select them....unless I highlight the entire page and select a particular colour.  That leaves all the colours in the photo off.  Any help would be so very helpful.   

    CeraG - It will help to answer if you supply your system version, pages version and if you lately have done anything to the computer (installing, uninstalling etc)
    I think you have forgotten to do a Software update or it could also be a font problem but more info from you is needed!

  • Why are contacts not showing up after added

    why are contacts not showing up after added. Don't show up after they added when I want to select then for a new email

    I am replying to my post with the hopes that someone can please help me!
    I am adding new episodes, but they don't show up on the main page. The most recent one to show up is from 10/29/07. I added a new episode today, but it doesn't appear on the main page (before you subscribe). Is there a limit to the # of podcasts that can appear on the main page? Has anyone else had this problem? All the relevant info is above.
    Your help is much appreciated.
    Message was edited by: oneness_podcaster

  • Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

    Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

Maybe you are looking for