Library Transfer from Ulitcap & Ultiboard 2001 to NI Circuit Design Suite 10

Hi there,
I have recently upgraded to the NI Circuit Design Suite 10 from Ulticap & Ultiboard 2001.
I loved the old software so much that it broke my heart when it started to fail me causing me to upgrade, I never had any issue's with this software OK Ultiboard 2001 did regulary crash (Every 5 Minutes) but I learned how to get round this and used it in Anger on many many occasions.
But this has now left me with a Dilema.
I have Customer Librarys, and Schematics in Ulticap which I am unable to Import into Mutisim, and when I do they are not displayed correctly same as Ultiboard 2001, yes I can view the files but I am yet again unable to Import the Librarys
Has anyone else ever had this issue, and if so could they talk me through it.
I wish the software had never changed, as I always hated "EWB" as I never found it reliable enough when I was college, and I am now seeing it as part of my favourite software, but I suppose this is progress.
So all of my settings are wrong and I am as of yet unable to how to alter them back to how I liked to work, so on a recent design I stopped using Multisim and went back to Ulticap it was quicker and easier to use, but I not prepared to throw £2,000 away, so any assistance on this would me much appreciated.

Hi Jim!
I am very pleased to read about your problems - i suffer the same sh.. since the last 3 days. Oh god give us UltiCap back!
We found out that our Components (mostly ATMEL Prozessors, RAMs, Powerdevices from SGS and so on) failed in MultiSim.
I tried the following way:
Put the UltCap Library on a sheet, read with MultiSim and the put the Components to the new Database.
At the moment it is a total desaster!
The Pin descriptors (e.g. CLK or VCC ) shift their locations. Ok no Problem. Open the Component in MultiSim with the Editor and shift the descriptors back.
Everything looks fine in the Editor - save it.
The Component now looks good even in MultiSim - now the next Step => Save this Component to the User-Database.
This is done easily with some more clicks (allways clicking around..).
No the Test.
Place the Component out the Database.
Desaster!
The Pin descriptors shift again AND the worse thing the PIN numbers arew totaly mixed up (e.g. VCC = PIN 30 is then PIN 12 and so on..)
I tried for 2 days now. I can't believe it.
A long time i hoped to come around this update and thougt NI will make the EWB-Stuff more professionel but it is going worse i think at the moment.
Very bad that they offer no actual Libs to buy. The handfull of processors the offer is just stuff for students end even they would lough about it.
We had to make designs and were awaiting a real tool - but MultiSim is it not.
Anyway if it works converting the Libs are you interessting in exchanging the UserDatabases?
Would be nice to here from you!
Best Regards
Ralf from mibtec.de

Similar Messages

HT4527 did library transfer from old to new computer but some files can't be located

I did a itunes library transfer from my old computer to my new computer. However when I select to play some of the songs from my new computer I get a message saying the file can't be located. This does not haqppen on the old computer. Any suggestions that might fix this problem.
Both computers have Windows OS's and I have the newest versions of I Tunes.

It seems you havent copied the actual music files over.
See this http://support.apple.com/kb/HT4527
Also, follow the steps given here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Songs' library transfer from nano to MacBook Pro

Just bought a macbook pro 13" retina transfering from a 7yr old dell pc realized that only half of the songs in the itunes transfered correctly. My specific question is: Is there a best way to transfer all of your songs' library from your ipod nano to the itunes in my macbook pro? i found similar questions in the forum but date back to 2006 and I would like to have more up to date info..Thanks!!

From your nano to MacBook? If you still have the Dell, you can also go from Dell to MacBook...
To answer your question, you cannot transfer song files from iPod to computer using iTunes (except for songs purchased from the iTunes Store). However, there are third-party methods and utilities that can transfer from iPod to your Mac. If you do a Google search on something like "ipod transfer," you should get some links.
Once the songs files are on your MacBook's drive, you can add them to your iTunes library.
NOTE: For songs purchased by you from the iTunes Store, you can also re-download them at no cost from the iTunes Store Purchased screen.

ITunes user library transfer from one account to another on the SAME comptr

Initial information: I have my computer, internet is with SBC Yahoo DSL. It has five sub accounts on it; mine, my wife's and my three children. Each has their own subaccount to make life easy.
I bought my wife an ipod in the August and through ignorance set up the itune to run on my subaccount. So when she wanted to buy a song, she had to go to my subaccount, log on, buy the song, plug in and download to the ipod. No problem.
I then bought my daughter an ipod for her birthday in September. Not knowing any better, she plugged into my subaccount and got all of her mother's stuff. Not a big problem in that they like the same stuff.
December my son gets an ipod. I learned my lesson and set up an itunes account on his subaccount. He therefore buys songs, that go to his ipod only. He wanted some songs from mom's, so I couldn't figure how to get them over. So I read the instructions on this web page. I burned the disk with the 22 songs that he wanted, but when burning the discs, no info (song title, artist, album) came with it, so I manually added the song titles and artists names. He was satisfied.
Now mom and sister want their songs put onto their subaccounts so that they won't have to share, or better, won't have to down load what each other has. I tried burning more discs, but when I got to disc #11, I realized that once again, there are no names or titles, etc to the songs on the burnt discs.
QUESTION: (finally) Is there a way to transfer the songs from dad's itunes, to other subaccounts on the SAME computer. This way not needing to burn lots of CD's without the information that they want.
Final piece of info, in case you don't know how SBC/Yahoo DSL is set up. I have the different subaccount on the computer, but to get from one to another, you need to either log off, or so simply "switch users." For this reason, such functions like "select all" then "copy" then "paste" I don't think can be done. Please make your answers very simple as I am not that computer literate.
Thank you

I'll try and keep this simple. It gets a bit confusing.
Ok, in the account which you want to transfer songs from, make a playlist of all the songs you wish transferred. After you do so, open the playlist, then go to "File > Export Song List". Put the file in a place that you'll remember. Then, go to the account you want the songs to go to, then go to "File > Import", and find the file you created from the other account and open it. That should import those songs into that iTunes library.

ITunes library transfer from PC Vista to a new MacBook Pro

Hello, I am considering a MacBook Pro and am ready to move forward but have a fairly large music file in my PC (Vista OS) iTunes (authorized to me) file. I am interested in how to easily transfer these files to the mac so that I can stop using the PC iTunes library as my main download site and use the MacBook Pro exclusively. I am new to Apple so be gentle. "iRip" in PC terms has made some back up easier but in the conversion to Apple that is not available.?. What are the options? Thank you for any information.

These pages may be of some help:
How to move an iTunes library from a PC to Mac (and back)
Networking with a Windows PC

File/Library Transfer from XP to Vista

My old XP machine is in its final stages of dying. I have purchased a new Vista machine to take its place. Now I need to get files and libraries transferred over.
I have two users, each using an iPhone. The total music on my old machine is around 20GB. However, I only actually have around 8GB in my iPhone library. I have a home network and have started copying files over. Unfortunately, they cannot be in the same place. Old machine had two hard drives and the music lived at E:\music. On the new machine (1 hard drive), the music will live at c:\music.
Once I get the music files transferred, how do I move the library and settings? I would like to preserve each users' library, play lists, etc. I have music and files both from iTunes and other sources (ripping home CD's).
I don't think I want to use my iPhone as a hard drive (http://support.apple.com/kb/HT1329). Moving the data isn't the issue; moving the settings is. Any suggestions? Most of the responses I've found so far deal more with moving data than the settings.

I'm nost sure this work, but you can try it.
On the XP PC, make a mapped drive to the Vista c\:music folder and call it M:
On the Vista PC, do the same thing - map Vista c:music to itself as M:
And for gods sake make sure all your XP & Vista permissions are correct....you need FULL control.
Run the consolidate commmand from this article and choose M: as the new destination.
http://support.apple.com/kb/HT1364
But DO NOT do steps 11 & 12! That would delete your music from the XP machine, not good.
Now you should be able to take the itunes msuic.itl file from the XP box and put it on the Vista box, having all you playlists, playcounts, ratings.
You're basically letting the XP box see the Vista box as an external hard drive.

HT203433 prior music library transfer from ipad to new computer help

i bought a new computer because my old one crashed and i lost all my info how do i transfer all of the previous music i had on my ipad to itunes match.

Syncing with new computer
This is an extract from one of our senior participant; hope he doesn't mind me reproducing it here
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.

ITunes library transfer from PC to Mac

Hi Folks,
My younger brother has just bought a mac and wishes to move all his music he has collected on his PC using ITunes into his new ITunes on the Mac. Having always been a Mac user I have no idea how to help. Is it just a case of dumping all his songs from the PC onto a USB stick and transferring them to the Mac or is there a more sophisticated method???
Thanks for your help and please humour my ignorance!
Cheers,
Tom

Hi Folks,
My younger brother has just bought a mac and wishes to move all his music he has collected on his PC using ITunes into his new ITunes on the Mac. Having always been a Mac user I have no idea how to help. Is it just a case of dumping all his songs from the PC onto a USB stick and transferring them to the Mac or is there a more sophisticated method???
Thanks for your help and please humour my ignorance!
Cheers,
Tom

On my home computer, when I transfer from my iTunes library to iTunes store, I'm presented with an empty window. Tool bar at the top of the page is in view and all it's 'drop-downs' function. Any ideas?

On my home computer, when I transfer from my iTunes library to the iTunes store I'm presented with a blank window. The tool bar is present and functional but regardless of what I do, the page remains blank. Any ideas?

Hey DDStoker,
It sounds like you may be experiencing issues with connecting to the iTunes Store. Try using the information in the following article to help you troubleshoot this issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Cannot transfer library books from ADE to my Kobo.

Please help. At first when I tried to transfer library books from ADE to my Kobo I got an error message "some file(s) cannot be transferred".I reinstalled ADE and reauthorized ADE and my Kobo, per Kobo help advice. Now I get an errror message that says I do not have permission to transfer the files. Kobo help says the issue is with my library. I contacted Netlibrary (the source of the books I borrowed on line) and they say they cannot find a problem. Has anyone else had this problem? Are any other ereaders easier to use to read library books? Thanks!!

yes i have a book from my local library on my kobo, but the content is locked and i get amessage "please use your adobe id to authorize your ereader with the kobo desktop application or adobe digital editions". adobe can't help

My itunes library has gone following a laptop rebuild. I do have my iPod which is up to date - can I transfer from the iPod to the library or will the iPod lose all its data if I snyc?

My itunes library has gone and is empty following a laptop rebuild. I do have my iPod which is up to date with music, photos, apps etc - can I transfer from the iPod Touch to the library or will the iPod lose all its data if I sync to the laptop? PLEASE HELP!

I'm guessing you've got iPod touch 2nd generation
iPod touch 2nd generation only goes up to 4.2.1, so you'll need a newer generation...
iPod touch 3rd generation only goes up to 5.1.1
4th and 5th generation both go up to iOS 6.1.3, wich is the current latest version.
Hope this helps
Stijn

I can't transfer my library downloads from Adobe Digital Edition to my e-reader. It "quits unexpectedly" every time. Adobe: what is the solution?

I can't transfer my library downloads from Adobe Digital Edition to my e-reader (Kobo Aura). It "quit unexpectedly every time. Adobe: what is the solution to this?

please let us know, book type that you are trying to transfer (pdf or epub)
you can check this at:
1. Open the file in Adobe Digital Editions.
2. Select the book that you are trying to transfer.
3. Go to File -> Item Info
4. Check Location.
You will see the file extension (pdf or epub)
Thanks

Cant get library to load after transfer from PC

Ok so I copied my consolodated library to my mac including the library and XML file. I get the playlists loaded, but none of my music will load. No matter how many times I load the library it will not put my music on. GRR!
Thanks

How did you transfer the library and library files from your PC to the MacBook?
The song locations are stored in the 'iTunes Library(.itl) file (more info about the library files here).
If you just copied it to the MacBook, iTunes will still look for the path of each song on your PC.
There are a few ways to correctly move the library.
If you have a large capacity iPod, use the instructions in this article:
How to use your iPod to move your music to a new computer
If you have a FAT32 formatted external HD, use these instructions:
iTunes: Moving your iTunes Music folder.
First move your library from PC to external.
Connect the drive to the MacBook and copy the 'iTunes Library(.itl)' file to the proper location on your MacBook (./Users/YourUsername/Music/iTunes).
Then move your music from the external drive to the MacBook.
Then there is another method by changing the paths in the 'iTunes Music Library.xml' file and using it as an import source, but this will not retain all information. I can explain it if you can't use one of the two previous methods.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.7) Several ext. HD (backup and data)

How to transfer itunes library music from a macbook to other macbook

how to transfer itunes library music from macbook pro to and other macbook pro with the internet cable .

Move it to the /Users/Shared/ folder.
(58475)

I run a library software called Overdrive to down load audiobooks; since updating to iTunes 10.5 and iOS5 I can't get the books to transfer from my laptop to my Itouch or iPhone4

Has anyone had experience using Overdrive to download audiobooks and then transferring them to an iTouch?

i found that overdrive transfures the audio books to your music library file or music file under your ipod. it just transferes a number like 11235 or 11238 a number is a chapter or part. i have not found a way to get the book name or picture to transfer from overdrive to my ipod. i started with ios 4.2 and everything worked fine as long as i used wma format. if i used mp3 format it just transfered the book name and chap number and put it under music in my ipod. i use win 7 and ie9. when i updated to ios 5 everything went into the toilet. now i had to creat a new file under my ipod locate the books in itunes then drag and drop to the new file. i called my files mp3 and audiobooks (2 files) i still only get a number for each part of the book. no name downloads to itunes or ipod.

Library Transfer from Ulitcap & Ultiboard 2001 to NI Circuit Design Suite 10

Similar Messages

Maybe you are looking for