/Library/Updates/*/*.pkg files needed?
I have about 1.4GB in /Library/Updates/*/*.pkg files, e.g., /Library/Updates/zzz061-8089/MacOSXUPdCombo10.6.3.1.1.pkg. I presume that this was installed a while back, because I am already at 10.6.8 .
are these pkg files still needed? if not, why does OSX not clean them up after installation or at least after a while??
sincerely,
/iaw
Because they are small and might be needed again when a user reinstalls their OS, then the download doesn't have to occur from the servers it can just use those again.
Similar Messages
-
[URGENT] BIOS Update .ROM file needed for G580
hii all
i have a lenovo G580 (2689) laptop i5-3210 DOS based model
Current Bios Version - 62CN39WW
i want to update my BIOS version as am unable to file it on the drivers/download section for my model.
if any one using the same Model of the laptop and using a updated version of BIOS then kindly extract/backup the BIOS using Universal BIOS Backup Utility http://forums.mydigitallife.info/threads/9856-Universal-BIOS-Backup-Toolkit
and kindly upload it in some hosting and provide me the .ROM files created by the BIOS Backup Toolkit
i need a later version for my present BIOS possibly 62CN41WW or any thing later than 62CN39WW
any help would be highly appricated....waiting eagerly for somebody's helpHello
Tecra A3 is pretty new unit and it will be interesting to know why you want to make BIOS update. Is there any problem with it?
Which BIOS update doesnt run, windows or traditional one? If you have no serious problem, dont do it at all.
The issue with your multidrive is a little bit confused for me. Which software you should install? -
i can't open .pkg files. i get an error telling me to choose an application to open them. the Installer app is not in my Utilities folder or in System/Library/CoreServices.
Install the UnArchiver and try again.
http://wakaba.c3.cx/s/apps/unarchiver
There is no Installer.app in the Utilities or Applications folder, there is one in the System/Library/CoreServices.
If yours is not there, then you need to:
1: Backup your data off the machine to a non-TimeMachine drive and disconnect all drives.
2: If you have TM, try to restore the Installer.app from the TM drive and reboot. See if things work.
If the above doesn't work, your going to have to re-install just OS X 10.6 (and bundled programs) from the disk by holding c and booting off the 10.6 disk and simply installing OS X. Then software updating to 10.6.8.
This will replace all bundled programs and OS X, not touch your files (backup regardless) and most third party programs.
Some third party programs will have to be reinstalled form original sources because they install Kext files into OS X and thus kicked out by the 10.6 reinstall form disk.
All should go well, however if you boot to a gray screen or other freeze, reboot holding the shift key down, then update all your third party software to be current to 10.6.8.
Another method is to re-install in to CoreServices the Installer.app from the 10.6 disk using the extraction program called Pacifist from CharleSoft, then running software update to get any updates for Installer.app.
http://www.charlessoft.com/ -
Best way to update audio files in library
I have quite a few audio files in the library for a Captivate project. I just modifed a bunch of them, and I am wondering the best way to update the library.
If I delete the files in the library, I lose all the links to which audio went with which slide.
If I go into each slide and replace the audio, that is more time consuming, and still a problem when the old audio file is still in the library
I don't see an option for directly replacing the audio in the library; if I put the new version (same name) it just adds it with a (2), i.e. audioclip and audioclip(2)
The update option does not give me what I need, unless I am missing something. First of all, I am using both a Windows computer at the client site, and my own Mac, so the paths are different. To use the update I would have to update the path for each audio file, which is more trouble that updating every file manually.
Any ideas?
Thanks.Hi there,
The recommended way is to go to that slide and import the slide audio again, new audio will replcae the old.
Once you have replaced all the audios, the audio files that are not in use in the project will still show up in Library.
You can get rid of all unused items from the library, by clicking on the icon for unused icon and then delete icon:
Thanks. -
I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with.
I suspect if you're trying to open a file in 08 that's been opened in 09 the file has been updated to 09 and will not open in 08.
-
Hi
apps\collab\commons\components\components\.content.xml:
Some files need to be updated first .Specify --force to overwrite remote files. while vlt command co
What has to be done?have you tried vlt up --force ? Make sure that you are using latest version of vault tool. Also let us know sequence of command you are using ?
http://dev.day.com/docs/en/crx/current/how_to/how_to_use_the_vlttool.html
Yogesh -
i get error:The operation couldn’t be completed. (com.apple.installer.pagecontroller error -1.) when trying to open a .pkg file downloaded from microsoft store. they said it needs to be .dmg file but how?
Student_245,
are you certain that you’ve completely downloaded the .pkg file — that the download didn’t end prematurely? -
macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.
If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
You will have to have all computers authorised with the relevant Apple ID's
Store > Authorise this computer...
This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
If both Computers use the same apple id this step is not required. -
I have windows vista and a bonjour file needs to be removed to update itunes 10.5.2.
What's the precise text of the message please, neal?
-
Updating Illustrator files in Flash Library
Hi, thanks for viewing.
I am working with a CS3 fla that's library is an Illustrator
file. Is there any way to update the imported library in one move?
It seems tha you can only re-import the AI file and pick and choose
which new elements to include.
Many Thanks
FrankTheir is no functionality to "auto-link" - you will have to
re-import the AI into flash if you want to see the reflected
changes. One thing you could do is save all X layers out in SVG's -
then edit the SVG's individually - then you could right click on
the SVG in the Library/Update. -
Replacing deleted iTunes *.pkg files
Unable to run "Mac OS X 10.3: Repair Disk Permissions", I performed a WorkAround fix (see below) which instructed me to remove from the "/Library/Receipts" folder the files:
"iTunes.pkg"
"iTunes4.pkg"
As suggested in the Workaround instructions, I put these files on my desktop. The "Repair Disk Permissions" function performed appropriately. Unfortunately, all of the "Desktop" items were moved to the "Trash" which was subsequently emptied before I had the opportunity to relocate "iTunes.pkg" & "iTunes4.pkg" back to "/Library/Receipts" folder".
How should I replace the deleted files. Can I simply perform an update or will doing so, because of the missing files, further agravate iTunes' functionality-loss?
Thanks for input, Marianne
FROM KNOWLEDGE BASE:
"Mac OS X 10.3: Repair Disk Permissions "Disk Utility has lost its connection with the Disk Management Tool..." alert
"Disk Utility has lost its connection with the Disk Management Tool..." alert
After installing iTunes 6.0.2 or later in Mac OS X 10.3 through 10.3.9, Disk Utility's Repair Disk Permissions may not finish, and the following alert appears in the Disk Utility window:
"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
(Quitting and reopening Disk Utility does not help.)
The following also appears in Console log:
* malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
WORKAROUND
Quit Disk Utility.
From the Finder's Go menu, choose Go to Folder....
Type the following, then click OK: /Library/Receipts
Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
iTunes.pkg
iTunes4.pkg
You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
Open Disk Utility and repair disk permissions again.
Quit Disk Utility.
Put the removed iTunes receipts back in /Library/Receipts.
Note: This issue does not affect Disk Utility's verify or repair disk features".
iBook (G3) Mac OS X (10.3.9)The .pkg files are not required for iTunes to function.
Disk Utility and Software Update use these receipt files to determine correct permissions and to see which software is installed.
As far as I know, the latest iTunes installer does not interfere with Disk Utility.
If you want, install the latest iTunes to get the .pkg back, but there is no need to do so.
Hope this helps.
M -
My Mac won't install mpkg and pkg files.
My Mac won't install mpkg and pkg files. Whenever I double-click an pkg or mpkg file, I get the dialog box to "choose an application" to open it. After some searching, I discovered I do not have the installer.app. I tried to Repair Disk from my Snow Leopard DVD but every time it boots from the DVD, my computer crashes. Any suggestions?
You have the installer app. It is located in /System/Library/CoreServices.
Use the finder's Go menu, Go to Folder... and type /System/Library/CoreServices to open the CoreServices folder. You should see it in there. If you do not see it there then that would beg the question what else might be missing and perphas you need to do an update (re)install (or restore form a hopefully good backup).
To try to reassoicatate .[m]pkl's with the Installer, take one of your .[m]pkg's and do a finder Get Info on it and set the Open with... to the Installer app. If the Installer app is not shown use Other... at the bottom of the list to navigate to the CoreServices folder and select Installer. Then click the Change All... button.
I am not sure why your [.m]pkgs would have lost their Launch Services association with Installer in the first place (unless it really is missing). -
Replacing .pkg files to fix "Error: No valid packages"
Hi all -
I've just learned the hard way that I'm not supposed to delete files from the Receipts folder.
I've done my due diligence, so I know that I need to replace at least "BaseSystem.pkg", but I have questions;
Is it ok, if I'm running 10.4.9, to copy it from my other mac running 10.3.9?
Should I try to replace the other .pkg files I deleted?
Should I just copy the whole Receipts folder?
What'll happen if I get packages I didn't have before, or that don't match the versions of the apps they're supposed to be associated with?
Sorry for all the questions, just want to be certain so I don't have to learn any more lessons the hard way.
Thanks!
OBTW: I've also finally learned - after 10+ years as a Mac user - to back up my hard drive.
PowerBook G4 Ti 550 (10.4.8), PowerMac G4 466 (10.3.9) 3rd gen iPod 30gig, 2nd gen Nano 8gigHi Dennis
my basesystem.pkg is specific to the 10.4 Tiger that was originally installed on my iMac G5 - numerous updates have not altered it.
I'll happily let you have a copy of my Tiger basesystem.pkg file - just email me.
What issues came up for you after deleting the files?
here's a list of the pkg files in my receipts folder....
BSD.pkg
CPU_AppleWorksCH.pkg
BrazilianPortuguese.pkg
BaseSystem.pkg
CPU_AppleWorksS.pkg
AppleAppSupport.pkg
BroadbandTunerUninstaller.pkg
Flip4Mac Web Plugins.pkg
Flip4Mac WMV Player Installer.pkg
French.pkg
CPU_AppleWorksZ.pkg
CPU_AppleWorksE.pkg
AppleMouse_PPC.pkg
Automator.pkg
GarageBand20Loops.pkg
GarageBand_202.pkg
2005 World Book Installer.pkg
Dutch.pkg
DVDPlayerUpdate.pkg
iChat.pkg
iDVD.pkg
iDVD5Themes.pkg
iDVDThemes.pkg
iMovie.pkg
iMovieHD502.pkg
iPhoto.pkg
iPhoto504.pkg
iPhotoContent.pkg
Italian.pkg
iTunesX.pkg
iWork Fonts.pkg
J2SE50Release3.pkg
J2SE50Release4.pkg
Japanese.pkg
MacOSXUpd10.4.7PPC.pkg
Java.pkg
Java131and142Release2.pkg
Keynote 2.pkg
Korean.pkg
MacOSX-File-0.66.pkg
MacOSXUpd10.4.5PPC.pkg
MacOSXUpd10.4.6PPC.pkg
MacOSXUpd10.4.9PPC.pkg
MacOSXUpdate10.4.4.pkg
MacOSXUpdateCombo10.4.3.pkg
MacOSXUpdCombo10.4.8PPC.pkg
QuickTime716.pkg
Mail.pkg
MediaFiles.pkg
MigrationAssistant.pkg
Norwegian.pkg
OnyX.pkg
OxfordDictionaries.pkg
Pages.pkg
psync.pkg
Safari.pkg
SecUpd2005-009Ti.pkg
SecUpd2006-002Ti.pkg
SecUpd2006-004Ti.pkg
SimplifiedChinese.pkg
SecUpd2006-007Ti.pkg
Spanish.pkg
Swedish.pkg
TraditionalChinese.pkg
X11User.pkg
CPU_RegionalBoot.pkg
CPU_MarbleBlast.pkg
CPU_Nanosaur.pkg
CPU_WorldBook.pkg
Danish.pkg
GarageBand10Loops.pkg
Finnish.pkg
Flip4Mac QuickTime Components.pkg
AdditionalEssentials.pkg
Essentials.pkg
CPU_AppleWorksT.pkg
CPU_AppleWorksJ.pkg
CPU_AppleWorksK.pkg
CPU_AppleWorksTA.pkg
CPU_AppleWorksUS.pkg
CPU_AppleWorksF.pkg
CPU_AppleWorksH.pkg
German.pkg
iCal.pkg
iWork Extras.pkg
GarageBandApp20.pkg
GarageBandDemoSongs.pkg
CPU_AppleWorksDK.pkg
AsianLanguagesSupport.pkg
AppleMouseBluetoothPPC.pkg
iTunes.pkg
iTunesPhoneDriver.pkg
CPU_AppleWorksD.pkg
CPU_AppleWorksKH.pkg
CPU_AppleWorksN.pkg
AdditionalSpeechVoices.pkg
CPU_Help.pkg
CPU_Manual.pkg
AddressBook.pkg
DVDPlayerUpdate200506.pkg
AirPortTi2005-001.pkg
AppleIntermediateCodec.pkg -
How can i re-link .mpkg and .pkg files to hidden Installer?
I am near the end of the process of setting up my new Mac Pro (early 2009) eight core. Quite the wonderful difference from my "Mirror Drive Door" dual 1.25 GHz machine!
The Mac Pro came with Mac OS X 10.6.2 installed. I updated this to 10.6.6 via Software Update along with a slew of other updates presented there. I downloaded and installed a bunch of software. Finally, I was ready to install iLife 11 from the "CPU Drop-in" DVD that was on top of the box when the computer was originally unpacked.
Unfortunately, it wouldn't even begin the install. The "iLife.mpkg" file, when double-clicked, returned the error message "no application associated with this document". Hours of investigation reveals that NO .mpkg or .pkg file will open; doing a "get info" on the files reveals that those files have lost their link to the Installer app.
AND since the only installer I can find is hidden in /usr/sbin, there is no way I can re-link .mpkg and .pkg files to it via "get info".
I downloaded Pacifist and used it to open the "Mac OS X 10.6.6 Combo" package and re-installed the Combo updater. Much to my surprise, that didn't fix the linking issue.
I've logged in as root, but still can't re-link the package files to the Installer as /usr/ is still hidden. Is there a way I can temporarily "un-hide" the /usr directory so that "get info; open with" can see it?
I've started from the Mac OS X installer DVD and repaired permissions on the hard disk and "repaired" the hard disk. No luck there either.
I did a clean install of Mac OS X 10.6.2 to a different hard drive and applied the combo updater and the packages worked as expected there. So some software I installed or by running a slew of updaters via Software Update broke the link between packages and the Installer.
I'm sure that re-linking to packages to the hidden installer app can be done via Terminal and possible other ways, but I don't know how to do it.
Short of doing a complete Mac OS X 10.6 re-installation and update and having to re-do several days of other software installations and data transfers, I'm hoping someone will offer some solutions or tips on how to solve my problem.
How do I re-link .mpkg and .pkg files to the Installer?Thanks for the reply. I know I had previously checked for the missing installer in /System/Library/CoreServices/ and I rechecked and it's still not there. But your tip spurred me to check the test 10.6.6 installation on the other hard disk and yes! It's there!
A quick copy from the second hard disk to my current hard disk and doing the "get info" trick and everything now works wonderfully. Only one day lost to trying to figure this out. Now that the problem is fixed, quite the relief. -
"Ipod Cannot Be Updated, The File Required Is Missing" - Can someone help?
I just got this error today and its bugging me.
Whenever I try to update my ipod it gives me a new window saying "IPOD (name) cannot be updated, the file required is missing."
ummm I thought maybe if i restored my ipod the file would be restored too but that didnt work....
After i restored it, the itunes library updated my ipod with all my original playlists and videos, but now when i try to update it and sync my pictures to it or create new playlists, it gives me that message.
Can anyone give me some advice on what i can do to fix this problem? i do have the iTunes 7.01 my ipod is the 60G Ipod Video (White)
Thanks for your help guys, i really need it.I just dealt with the same problem. None of the answers people gave to the problem worked!
Whatever it is that you're trying to put into your iPod... make sure that the file is located in your "My Music" file first.
Basically, when you get that message double check and if what you selected isn't in "My Music" drag and drop into it and try again.
I hope that helped!
I know... so frustrating.
Maybe you are looking for
-
Oracle Berkeley DB on windows 8.1 and future windows versions
Hi All, Can anybody tell me if oracle Berkeley DB will be supported in Windows 8.1 and its future versions. I understand that Berkeley DB relies on POSIX system calls and also that POSIX and WSU (Windows services for Unix) is deprecated fro
-
Unwanted link appears in paragraphs - AP div issue?
Hello. I am using cs4 on Macbook Pro (version 10.6.8) and develping the site below. http://www.gibbstowndentistry.com/ If you are using Firefox you may not see it, but if you are on Safari, you can see there is a link for whole paragraph in editable
-
Lumia 710 problem after trying to update
Hello to all nokia users!I have a serious problem with my mobile!I tried to update my phone but 2 times fell to update and now my mobile don't boot!When i try to power on the mobile only vibrate 2 times and then nothing!the screen remains to black!Ca
-
Hey guys, I've been having sleep issues with my macbook pro and i'm just trying to figure what the issue is.. i just did a clean install and pretty much left out all the 3rd party apps... it's been running solid for a few hours now.. no sleep or boot
-
Reservations Allocated to a Service Order
I am in desperate need of help. For our RMA's when the inbound receipt is done the Service Order (IW32) is being created automatically. When the tech works on the material and needs to issue stock to the material the reservation is created automati