Library upgraded from 1.5 2.0 not fully functional?

after installing 2.0 (prior to the 2.0.1 patch) i reset the library path to one of my old 1.5 libraries. restarted and it asked if i wanted to upgrade. i said sure and let it do its thing. when all was done and referenced images were tied back to their masters (had done some reorganization while still in 1.5 when i left Aperture for Lightroom). i started going through the library and revisiting some of the photos i hadn't seen in awhile. this was an old library that i was more testing 2.0 with since i had read all the horror stories about people losing full libraries.
most of the functionality is available for my images in 2.0. i say most because i opened one of my images and decided to open the exposure a little and i knew that i could save the blown out bits that i knew would come in with the recovery slider BUT... the recovery slider was greyed out so was the black point slider. this is the same on all the images. all of the images are linked to their master RAW file referenced on an external drive.
i do have some images that i loaded directly from card to AP 2.0 and they do have recovery and black point. thought this was a little strange. anyone else running into this? is there a way around it?

Sure. You're using the old RAW conversion algorithm... 1.1 or 1.0. You can't use the new adjustments with these photos.
Change the RAW conversion to 2.0... it's in the top box under RAW conversion settings. You can bulk convert images with the "migrate" command -- be aware this may substantially change how the images look as it's a totally different RAW pipeline. But once you've done that, the new adjustments will be available.

Similar Messages

Upgrade from 4.6 to ECC 5.0 Functional Upgrade

HI Friends,
We are upgrading from 4.6 to ECC 5.0 Functional Upgrade, with New G/L Functionality, i would like to know what are the pre requistics for performing this upgrade and along with check list.
Thanks in Advance
Satish

Hi Satish,
Now i am sending some URL for Functional upgrade
May be those are all useful toyou
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/
Regards
Surya

Web pages are not fully functional on iPad

Until recently I was enjoying my experience with my iPad 2. I went to Netflix to write a review for a film and was unable to do so. For whatever reason, I am unable to select the desired stars for my rating. While obviously this is not a deal breaker, it is frustrating knowing that some web sites are not fully functional with my iPad. I hope this changes in the future. Cheers.

Here we are over 2 years after the original post and I am having this problem too. Having it in both Safari and Chrome. When I first got my Ipad 3 I was able to rate movies (select star from red to yellow) on the netflix.com website. Somewhere along the line that quit working. Everything else on the site works even radio buttons on page where you select types of movies you watch and how much. At first I thought something on the website changed but then I got a new Ipad 3 at work, low and behold, I was able to rate movies by selecting stars. So what's the difference? Tried deleting history, cookies etc. Removing apps and rebooting. Long story short, I reset my Ipad deleteing all user info and settings and setting up as a new Ipad and it still doesn't work. I can't find any settings on the website itself that affect this. Anyone?

DTR component not fully functional

Hi all,
We recently tried to change the DTR repository properties file, according to SAP NOTE: 1001509.
After performing the process mentioned in this note, we noticed this particular repository.properties file has the wrong content (I downloaded the file from online NWDI - DTR and this caused the file to include HTML Tags and replacing the Key/Value pairings with a different keyset).
This caused the DTR to not fully function; for example we cannot checking any activities anymore. Whenever we try to restart the DTR application in the Web AS, we get a NumberformatException on multiple Key/Values in this repository.properties file.
At this moment, we are not capable of changing this repository.properties file since we cannot checkin activities.
We also tried to replace the repository.properties file on UX, but we now believe (since this file is also version controlled) it is only contained in the NWDI Database.
I've included the error trace DTR pushes out;the current repository.properties file (wrong one) and the correct repository.properties we wish to have in place.
This is a very challenging topic for our teams to solve.
Anybody up for an idea?
Thanks,
Wesley

The great thing about most BlackBerry phones is their removable battery. Anytime something goes wonky with your phone, doing a battery pull should be your first course of action. When you do a proper battery pull, many unnecessary temporary files get deleted and this helps your phone run smoother and ofter quicker. To do a proper battery pull, make sure your phone is powered on then remove the battery and replace it a few seconds later and wait for your phone to boot up. Don't worry, you won't lose any personal data. Many phones from competing manufacturers don't have this feature so be happy that you can correct many issues using this simple technique.
I can answer your question about voicemails right away. Your carrier's voicemail number should be programmed on the SIM card. To access it, simply press and hold the #1 on your phone for a second or two. That should direct you right to your voicemail box where you'll be prompted to enter your password. If you press and hold the #1 on your keypad and you're not directed to your voicemail box, contact your carrier to obtain the number as well as instructions on how to enter it in your phone.
Try the battery pull and report back with your results. Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Upgraded from vista to windows 7 not seeing music list

I upgraded from vista to windows 7. When I sync my iPhone 4 I am not seeing my music listed nor my apps in the list. I had backed up my entire computer to my external hard drive and copied everything over to iTunes. But not showing up in any lists when I connect my phone???? Any ideas?

Hi,
I'm am used to working on Mac's but u don't think my advice will hurt.
iTunes reads your hard drive for songs and compiles a song list for them.
It then stores this data as your ituneslibrary.plist file.
In the file drop down menu you should have an option to select library.
Try reelecting your iTunes library icon and then it should reload your iTunes with playlists and play counts etc

Faces problems; intrinsic to iPhoto '11 or due to library upgrade from '09?

I have been experiencing many problems with Faces in iPhoto '11 that I did not see in iPhoto'09. Can anyone tell me whether these are most likely bugs currently intrinsic to iPhoto '11, or caused by the upgrade of my 20,000+ photo library from iPhoto '09 to iPhoto '11? Has anyone found any workarounds for these problems?
Examples of Faces problems include:
(1) Photos in my Unnamed Faces smart folder (Face-is-unnamed) that show no unnamed faces
(2) Mis-matches between Info frame list of faces in the photo and the face frames visible in the photo
(3) Fewer photos appearing for face confirmation than stated; usually one less. Sometimes I am told there is one unconfirmed face, and none appear at all.
(4) iPhoto offering faces as possible matches that look (at least to me) nothing like the face in question, (although they may be in the same photo), but failing to offer identical or near-identical poses of it.

The faces turn up in Events when someone accidentally imports the Library to another one
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I updated software upgrade from itunes. now phone will not work at all. only have picture of apple icon and usb on screen

i downloaded an upgrade from itunes last night to os5.1 i think. it said there was a problem with the download. now my phone will not work at all. it just has a picture of the itunes logo ans a picture of a usb cable on it. my computer will not recognise phone either

http://support.apple.com/kb/TS1538
Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable.

Upgrade from cs5 to cs6 will not install

Hi, I purchased and downloaded the upgrade from CS5 to CS6 including the Akamai installer. but the upgrade will not install and I am unable to contact Adobe anywhere for a solution to my issue. I have uninstalled CS5 using Adobe CC Cleaner and it still won't install. Help!!!

Upgrade from CS5 to CS6
I downloaded 2 files;
Photoshop_13_LS16.exe 1.2MB
Photoshop_13LS16.7z 1.1GB
plus the instructions file
(I've downloaded these files now 3 times and tried them all)

Upgrade from N95 to N95 8GB not enough memory

I have just upgraded from the standard N95 to the N95 8GB, I did the back up from the old phone however when restoring the files to the new handset it has completely filled the phone memory. There does not seem to be any management of the memory (aka sim/phone of old) I cant see how to make it use the larger mass memory rather than the phone.
Having the phone memory full renders it unable to do anything, like set up a mailbox or choose a ringtone.
Any ideas....

I have just upgraded from the standard N95 to the N95 8GB, I did the back up from the old phone however when restoring the files to the new handset it has completely filled the phone memory. There does not seem to be any management of the memory (aka sim/phone of old) I cant see how to make it use the larger mass memory rather than the phone.
Having the phone memory full renders it unable to do anything, like set up a mailbox or choose a ringtone.
Any ideas....

Trackpad not fully functioning after Yosemite upgrade

I have a mid-2011 iMac 27". I was running Lion and upgraded to Yosemite. I have 12 gb of RAM and plenty of storage.
Since the upgrade, the trackpad no longer fully functions. It will two finger swipe up and down within a window (although even that has crashed in Firefox and the only way to get the swiping back is to close and reopen Firefox).
No three finger swipes or pinching to get to Launchpad. No four finger swipeups to get to Mission Control. No side to side swiping either.
No pinching to zoom in or out. Nothing...just two finger up/down swipes and single/double taps for left/right mouse functionality.
Keyboard works just fine. I can arrow key all over the place when the trackpad crashes, but that is a pain.
I've tried everything I've read so far.
I've turned off WiFi as I read in one of the threads that was a fix for someone else.
I've removed the trackpad from Bluetooth, turned it off, shut down the Mac and after rebooting then reassociated the trackpad when the Bluetooth prompt comes up. Nope, doesn't work either although others have said that works for them.
I'm frustrated as I swipe all the time and would like to retrieve that functionality. Help!

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Making interactive PDFs...Is prototype not fully functional?

I am a business guy (technically savy) who is interested in creating interative PDFs (primarily navigation).
The mantra of fireworks, design once, export to many is very appealing. But I don't understand why it refers to the final product as a prototype.
question 1) The training videos refer to the final interactive PDF created as a prototype. Why? What makes it a prototype? Why isn't it a fully fuctional interactive PDF that can be made more sophisticated by adding forms, etc. ? If it is a prototype, what program do you use to make it fully functional? Is that InDesign? Is Fireworks merly a strating point, to be finished in InDesign? What is disabled to make it only a prototype?
question 2) This is the same question, but about export to CSS & Images (web site). I realize you can add far more functinality with Dreamweaver, but isn't the export a fully functional (if simple), web sight? What is disabled to make it only a prototype?
Prototype implies to me that it does not produce a useable final product. It has to be made useable or finished by another product.
THanks!
Bob

I think the term "prototype" is being bandied about a bit too liberally <grin>. Here's my viewpoint:
Fireworks can produce finished final artwork for screen. I do this all the time as do many other much more talented Fireworks users.
From a web site and application perspective, Fireworks is a prototyping tool. It doesn't build final web sites for applications; it just builds the graphical shell that other applications (such as DW or FC) can use for building out the final product. As a prototyping tool, you can create very realistic representations of the final product, for client feedback and review and to a degree, user testing. One option for gaining feedback from the client is the PDF export. Combined with Acrobat Pro, you can activate the commenting feature and then this PDF gives you and the client the ability to place feedback right in the PDF just by using Acrobat Reader. In this way it can be a useful tool while designing the site or application, and getting specific feedback from the client within the graphical prototype.
The PDF Export could also be a final product, IMO, depending on it's end use. There is no rollover support, video or audio support from within Fireworks or the export process. Likewise for transitional effects. Interactivity though, using the rectangular slice or hotspot tools, is fully functional. Keep in mind though, that default print resolution in FW is 72 ppi. If you plan on printing out this PDF, you'll want to start with a higher resolution for better printing quality.
HTH

Flash not fully functioning in Chrome

When going to a flash page, initial video or flash object will play, but no actions (pause/play/follow link) can be selected. After any click in the flash pane, the mouse pointer will be constantly engaged (i.e. moving the mouse back and forth across the pane will move a video scroll bar right/left, but it will have no effect on the video playback; google maps street view- any click on the map image will allow you to pan but nothing can be selected to advance the view down the street, zoom, etc)
Using Chrome default plugin Flash - Version: 10.3.183.5. Same version in use for IE8 is fully functional.

Are you using relative links to the paths of the media, e.g.: assets/videos/movie1.flv ?
What are you using for FLV playback, the FLVPlayback component itself or are you handling NetStream/Video yourself, or StageVideo?
Default publish settings are never to be trusted in Flash, ever. Paths are RARELY ever saved correctly unless they're relative and even then it's not safe to assume it's correct. I've, long ago, made it a habit of going into publish settings, clicking the browse icon next to SWF/HTML/EXE/etc and manually set the location to publish every single time. If you do that the error should go away about publish destination (and yes, it's really irritating).
What FLV codec did you use?

Is the trial version not fully functional?

Hi,
I'm testing PE8 trial - also I'm a complete newbie for video editing and PE8. I assume I export my project to end up with a finished video but PE8 doesn't let me export. It's all grayed out. Is it because it's a trial copy?
Thanks,
Sam

Sam,
The trial is fully functional. The ONLY limitation is that the Exported/Shared output will have a watermark banner on it.
Now, the old Export functions (well, most of them) are now grouped under Share. That is why I had to change things to "Export/Share," as it depends on one's version number.
You will find many "export" Presets under the Share tab. Why Adobe even chose "Share" is a mystery to me, but then they did not ask...
Good luck, and do not forget that watermark.
Hunt

Upgrade from CS2 to CS5 will not connect to Elements 5.0 "catalogue" files.

Until now, I have been seamlessly using CS2 as my Photoshop Editor which was accessed through the Photoshop Elements 5.0 Catalogue function.
Within the Elements catalogues, raw or processed photos were acquired to Photoshop CS2 by left clicking the drop down menu "Edit" > and then left clicking to select, "Edit with Photoshop".
This no longer happens for the upgrade CS5. How do I restore (re-appoint) CS5 as my external editor, still from within the drop down Edit menu in Elements 5.0? Note: As the CS5 upgrade "glopped on" to the previous CS2 version, I cannot return to CS2 even if I wanted to -- (I don't).
It must be something obvious that completely eludes me.
SR

Hi Noel,
Went through the sequence in Elements as you suggested -- and was informed by the folllowing box:
"You do not need to choose Photoshop or Photoshop Elements (dropped the suffixes in each case) as the other editor.Photoshop elements already supports using these editors from the Edit menu and Edit toolbar button."
I tried going through Bridge, again as you suggested: Bridge Label Preferences > File Type Associations . However, nothing there to be found in the very extensive list.
I think the problem is access through elements.
It may be that I'll need to buy an Elements 9.0 upgrade to continue using the Elements catalog.
Thanks again for sharing your knowledge.
Seymour

Upgrade from ios6 to iOS 7, not 8

I want to upgrade my iPhone 4s from 6.1.3 to 7 but not 8.

Cannot be done. iOS 7 is not being signed for devices that will run the latest. If you attempt to update your 4S it will update to the latest iOS, which as of a few minutes ago is iOS8.1.

Library upgraded from 1.5 2.0 not fully functional?

Similar Messages

Maybe you are looking for