Library & Vault significantly different sizes

My library is 678 gigs. My vault for that library is only 556 gigs. And all is up-to-date.
I know they should be a different size, but more than 100 gigs worth?
I have never seen this before.
Anyone else?

Yeah, the vault doesn't store the thumbnails or the previews, given it's a backup and given they can all be generated.
This is to save space. In your case it saves about 120 GB of space

Similar Messages

HT1386 My ipod and my itunes library are significantly different with the itunes library being smaller. If I say "synch", is my ipod going to look like my library ( which I do not want)

For some reason my IPOD and my Itunes account appear to be greatly out of synch. However I am afraid to lose everything on my IPOD. Should I synch?

Use the manual method of syncing. You then only sync the iTunes you check to sync to your iPod. For how see the manual method here:
iTunes: Syncing media content to iOS devices and iPod

I have a few hundred duplicates in my iPhoto library, but the file sizes are different. So one is 1.3mb and one is 567kb. I want to delete the smaller ones, but short of comparing each duplicate, is there a way to do this?

I have a few hundred duplicates in my iPhoto library, but the file sizes are different. So one is 1.3mb and one is 567kb. I want to delete the smaller ones, but short of comparing each duplicate, is there a way to do this? I've been looking at Duplicate Annhilator but I don't think it can do it.
Thanks!

I just ran a test with iPhoto Library Manager, Duplicate Annihilator, iPhoto Duplicate Cleaner, Duplifinder and Photodedupo. I imported a folder of 5 photos into a test library 3 times, allowing iPhoto to import duplicates. I then ran the 5 photos thru resizer to reduce their jpeg compression but all other aspects of the file the same.
None of the duplicate removal apps found set that was reduced in the file resizer. That's probably due to the fact that the file creation date was being used as a criteria and the resized photo would have a different file creation date even though the Image Capture date was the same.
They all found the 3 regular duplicates and some of them would mark two and leave the 3rd unmarked. iPhoto Duplicate Cleaner can sort the found duplicates by file size but if the file was edited to get the reduced file size it might not be found as it would have a different file creation/modification date.
iPhoto Library Manage was able to find all duplicates and mark them as such if the file names were the same the the filename option was selected. Otherwise it also missed the modified, resized version. It allowed one to select the one photo to save before going to work on the library.
So if a photo has been reduced in image quality or pixel size it will not be considered a duplicate.
OT

Vault (external) file size Versus Aperture Library (internal) file size discrepancy?

Using Aperture 3.3.1 (all my images are Referenced). I created my first vault on an external hard drive. The Vault.apvault file size is 32.8 GB. My Aperture Library.aplibrary file size on my iMac hard drive is 81.6 GB. So I am wondering if I have a full back-up in Vault or not. Seems like a large discrepency in file size. Any thoughts or help would be appreciated.

Do any Images that you don't expect show up when you filter "Photos" using the Rule "File Status" with the argument "Managed"?
If not, then close Aperture and repair your database. Instructions are on the Apple Aperture trouble-shooting page.
Does that make any difference?

≥≤ Symbols output in different sizes. Please help!

Working in Quark Xpress 9.5.1, on OS 10.8.4 using Font Agent Pro 5.028...
I am having difficulty with the the font Helvetica Condensed. Sometimes the greater than/equal (≥) or less than/equal signs (≤) are different sizes. We have three different macs all set up with same software/versions and using the same font library. Each one is outputting differently. We have struggled with this same issue through various OS and various versions of Quark and Font Agent Pro.
I am not very knowledgeable about all of the things that can go wrong with fonts - and I just don't know how to get to the source of our issue.
This happens using both Adobe and Allied Fonts.
Please help!

The usual problem is that at print time, your printer does not have the exact font available, and substitutes a different font that it thinks should be comparable. The letters sometimes work, but special symbols are rarely the same in all aspects in different fonts.
If there is a Printer option to do so, tell it not to do any Font substitution.

Move the iBooks library to external/different hard drive?

Hi! Is it possible to move the iBooks library from its default location on the boot drive (where the iBooks-application also resides) to a different hard drive?
Currently all my ebooks and PDF’s are kept in the default „Books“-folder in the home-library on the SSD-boot-drive of my Mac where the iBooks application is also kept by default (path: Users/„username“/Library/Containers/com.apple.BKAgentService/Data/Documents/iBo oks/Books). Space is getting narrow on my SSD-boot-drive so that I would like to free up approximately 20 GB by moving the entire iBooks library to a second internal HDD-drive of my Mac or to an external USB-drive.
I have not been able to find any instructions on the internet on how to move the iBooks library nor have I been successful in any of my experiments to move the „Books“-folder. What I have tried is the following:
1. I moved the original PDF-files away out of the „Books“-folder to a different drive and placed aliases from these files in the „Books“-folder. The result is that the iBooks-application will simply re-create a full size copy of the original PDF file in the „Books“-folder. I.e. no saving of disk space!
2. I copied the „Books“-folder from its default location in the user library on my internal SSD-boot-drive to a second internal HDD-drive, erased the „Books“-folder at the original location and instead placed a hard link at the original location. I verified that the hard link is working and pointing to the right location on the second drive. The result is that the iBooks-application will not recognize/show any of the PDF-files at the new location. Trying to re-import the missing PDF-files into iBooks results in the message „This book is already in your library. Do you want to replace it with the one you’re adding?“. By clicking on „Yes“ the same message returns infinitely often. I.e. no successes!
3. I repeated the same procedure as described above under 2. using the „iBooks“-folder which encloses the „Books“-folder (along with three other folders) with the same results as before. I.e. no successes!
(path: Users/„username“/Library/Containers/com.apple.BKAgentService/Data/Documents/iBooks)
Does anyone know how to successfully move the iBooks library to external/different hard drive?
Does anyone have links to internet discussions about this problem?
Regards BJB

I was in on the Mavericks beta, when iBooks was introduced. You can not believe me if you want but it isn't currently possible to store the iBooks library on external storage at this time. The ebooks must be on the path ~/Library/Containers/com.apple.BKAgentService/Data/Documents/iBooks/Books for iBooks to function properly. Any other method you may find to accomplish what you want will be unapproved and could break at any time.
You may submit your polite feedback to Apple here: http://www.apple.com/feedback/ibooks_ios.html

Multiple stages on multiple screens of different size

I'm working on a project that requires me to have two stages on two screens of different size. How do I do this in Flex, or is it even possible?
More specifically, I am building a kiosk appliction, that will have the menu on a small touch-screen that sits in front of a larger, wall-mounted screen. When the user selects content to be played (videos, web sites, whatever) from the touch-screen, then the effect of that selection needs to be sent to the other stage. I need to be able to run a screen-saver on the main screen, also. Basically, the controls are the main application, and the other screen is simply a container for viewing things.
I am currently packaging my Flex project in AIR, not through the web, so I actually have a windowed application. Basically, I just need to create a new window with a custom chrome that simply holds a movie.
Is such a thing possible in Flex? I couldn't figure out how to spawn another stage, much less one that was referencable from the first stage.

Hey all. I have reached the answer. I left everything up that I posted before, in case anybody is having similar issues. To create the custom component, click your project, create a package, and then right-click that package and create a new MXML component. Then, create the MXML just like you would before. Your root tag will be whatever you are working to modify (so, s:Window for my case, but you can do an s:Label or whatever you want). So, first, I'll give you the code for my simple Window component:
[CODE]
<?xml version="1.0" encoding="utf-8"?>

<s:Window xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    xmlns:mx="library://ns.adobe.com/flex/mx"
                    systemChrome="none" visible="true" transparent="true" showStatusBar="false" width="400" height="300"
    <s:layout>
        <s:BasicLayout />
    </s:layout>
    <s:Label id="controlScreenTitle" text="new Window from VideoScreen component" fontSize="72" fontWeight="normal" color="#222222">
    <s:filters>
        <s:DropShadowFilter color="#CCCCCC" />
    </s:filters>
    </s:Label>
</s:Window>
[/CODE]
All I did was a very simple white box there. You can disable the system chrome and such from the main Window tag, as I have shown. The window this creates has no [ _ ] [ [] ] [ x ] buttons, bar along the bottom, or any background. In my actual project, this component will hold a container to play my video objects.
Then, I create my main document:
[CODE]
<?xml version="1.0" encoding="utf-8"?>

<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                        xmlns:s="library://ns.adobe.com/flex/spark"
                        xmlns:mx="library://ns.adobe.com/flex/mx"
                        showStatusBar="false" alwaysInFront="false"
                        creationComplete="init()">
    
    <fx:Style source="KioskScreensStyles.css" />
    <fx:Script source="controlScreenMain.as" />
    <fx:Script>
        <![CDATA[
            /* Insert other ActionScript stuff here. Try to put as much of it as you can in the .AS file, though */
        ]]>
    </fx:Script>
    <fx:Declarations>
        
        
        
    </fx:Declarations>
    <s:BorderContainer id="controlInterface" right="0" left="0" top="0" bottom="0" borderStyle="inset" borderColor="#CCCCCC">
        <s:layout>
            
            <s:BasicLayout />
            
            
        </s:layout>
        
        <s:Label id="controlScreenTitle" text="Error loading program..." fontSize="48" fontWeight="normal" color="#222222">
            <s:filters>
                <s:DropShadowFilter color="#CCCCCC" />
            </s:filters>
        </s:Label>
        
        <s:ToggleButton id="btn1" label="Play video 1" click="btn1_clickHandler(event)" />
        <s:ToggleButton id="btn2" label="Play video 2" click="btn2_clickHandler(event)" />
        <s:ToggleButton id="btn3" label="Play video 3" click="btn3_clickHandler(event)" />
        <s:ToggleButton id="btn4" label="Play video 4" click="btn4_clickHandler(event)" />
        <s:ToggleButton id="btn5" label="Play video 5" click="btn5_clickHandler(event)" />
        <s:ToggleButton id="btn6" label="Play video 6" click="btn6_clickHandler(event)" />
    </s:BorderContainer>
</s:WindowedApplication>
[/CODE]
Now, the important part will be the .as file. Here's parts of that:
[CODE]
/* Imports */
/* import custom components. This is what allows us to open a new window in AIR. NOTE: THIS IS HOW YOU GET THAT CUSTOM MXML FILE IN HERE TO USE */
import customComponents.VideoScreen;
// import older mx stuff only when needed. Try to avoid using these.
import mx.controls.Image;
// import the newer Spark components. Use these for everything possible.
import spark.components.VideoDisplay;
import spark.components.Window;
import spark.primitives.Rect;
// Global variable declairation
protected var screens:Array = Screen.screens;
protected var controlScreenSizes:Rectangle = screens[0].bounds;
protected var videoScreenSizes:Rectangle = screens[1].bounds;
// All variables below Defined in init(), to be sure that they have been fully loaded
// While the :Window declairation technically works for the controlScreen, Flash views this as an error, and will not process everything properly if I type it like that.
//protected var controlScreen:Window = this.Window;
protected var controlScreen;// = this;
/* NOTE: THIS IS THE USE OF MY NEW, IMPORTED CUSTOM WINDOW. This is all you need to do to make it. */
protected var videoScreen:VideoScreen = new VideoScreen();
protected var btns:Array;
/* Initialize all my variables, and call the needed functions to set everything up */
protected function init():void
    controlScreen = this;
    // This is a Window method that opens the Window. I did not have to code this.
    videoScreen.open(false);
    btns = [btn1, btn2, btn3, btn4, btn5, btn6];
    placeScreens();
    createControlScreen();
    loadScreenSaver();
/* Moves all my screens so that they sit in the top-left of each of the two screens, and then expands to be full screen on those two screens, whatever size that may be. */
private function placeScreens():void
    // We move it to -1,-1 because there is 1 px padding and dead white space that I can't figure out how to remove.
    controlScreen.move(-1,-1);
    controlScreen.width = (controlScreenSizes.width+1);
    controlScreen.height = (controlScreenSizes.height+1);
    controlInterface.width = (controlScreenSizes.width+1);
    controlInterface.height = (controlScreenSizes.height+1);
    videoScreen.systemChrome = "Standard";
    videoScreen.move(controlScreenSizes.width,0);
    videoScreen.width = (videoScreenSizes.width);
    videoScreen.height = (videoScreenSizes.height);
/* Puts all the buttons where they belong, and attached the background image that we need and so forth */
private function createControlScreen():void
   /* Most of this code is not needed for the demonstration, so I only include what I feel would be helpful, with psudocode for the rest */
    var backgroundImg:Image = new Image();
    backgroundImg.source = "assets/backgroundImg.jpg";
    var backgroundVid:VideoDisplay = new VideoDisplay();
    backgroundVid.source = "assets/backgroundVid.mp4";
    backgroundVid.width = (controlScreenSizes.width+1);
    backgroundVid.height = (controlScreenSizes.height+1);
    backgroundVid.autoPlay = true;
    backgroundVid.muted = true;
    backgroundVid.loop = true;
    /* Format the buttons. You can change height, width, x and y position on the form, label (the text on it), and some other things (including the ability to spawn video or picture or sound when clicked and such for animations. */
    /* buncha code that moved the buttons around and made them all fit in the screen dynamically based on the screen size. */
    /* Finally, play with controlScreenTitle, which is a label control that you can styple and use for text on the screen in addition to the buttons. In here is just a bunch of code to do that*/
    /* Attach the elements to the controlInterface. The first put on has the lowest z, therefore is under the rest. Stack them in the order you want then displayed. The first one should be either backgroundImg (image), or backgroundVid (video), depending on what you provided and want. Note that the video causes the buttons to lag a lot */
    controlInterface.contentGroup.addElement(backgroundImg);
    //controlInterface.contentGroup.addElement(backgroundVid);
    controlInterface.contentGroup.addElement(controlScreenTitle);
    controlInterface.contentGroup.addElement(btn1);
    controlInterface.contentGroup.addElement(btn2);
    controlInterface.contentGroup.addElement(btn3);
    controlInterface.contentGroup.addElement(btn4);
    controlInterface.contentGroup.addElement(btn5);
    controlInterface.contentGroup.addElement(btn6);
    /* Buncha code for the functionality */
} // End function createControlScreen()
/* Puts the screensaver up on the video display so that we don't burn out the display */
private function loadScreenSaver():void
    //pull in screensave into that window
/* Makes sure that the user doesn't see two buttons active at the same time--that would look like two movies were playing at the same time. */
private function deselectOtherButtons(clicked:int):void
    for(var i:int=0; i<6; i++)
        if(i != (clicked-1))
            btns[i].selected = false;
/* All of the below do the same thing: unselect all the other buttons when one of the buttons is clicked. I could just create one click event handler, but I wanted to leave the possiblity of customizing the result of each button's click, so I left it this way. */
protected function btn1_clickHandler(event:MouseEvent):void
    deselectOtherButtons(1);
protected function btn2_clickHandler(event:MouseEvent):void
    deselectOtherButtons(2);
protected function btn3_clickHandler(event:MouseEvent):void
    deselectOtherButtons(3);
    deselectOtherButtons(4);
protected function btn5_clickHandler(event:MouseEvent):void
    deselectOtherButtons(5);
protected function btn6_clickHandler(event:MouseEvent):void
    deselectOtherButtons(6);
[/CODE]
If anybody looking at this has any questions about it, feel free to ask me. I am not usually able to comb the forums, so you'll have to PM me or something. I actually put this up right after I found my solution, so there is work still to be done on it (obviously). But if you ever need to do anything like this, here's some code for you.

How i can match my new app to some different sizes?

how i can match my new app to some different sizes?
and after I will do that, when someone download my app how
its match the verision of the size to his iphone? its do it outomatic?
thanks!

Get started by reviewing the Auto Layout Guide, particularly the section Working with Constraints in Interface Builder.
https://developer.apple.com/library/ios/documentation/UserExperience/Conceptual/ AutolayoutPG/Introduction/Introduction.html

Iphoto import imported my photos in different sizes

I have transferred my iPhoto library from my old MacBokPro to my new one.
Initially I used Migration Assistant which took 2 days but eventually worked.
The problem is that when I click on a photo in the new library the photo is a very small version of the same photo from the old library?
Not all of the photos are small so for example there could be 20 photos taken on the one day but 7 are much much smaller in the library on the new MBP
They are both running iPhoto 9.5.1 and when I compare the info of the new photo on the new MBP to the old MBP the information is the same it's only the size of the photo in the library that is different.
I'm concerned that the quality will be affected should I need to print down the track.
I have spent days( not an exaggeration!! ) with Apple who have given me many different "remedies" none which have changed the size of the photos.
The latest "remedy" was Airdropping the folder over again which re imported the photos exactly the same way as they did initially on Migration Assistant.
Should I just stop wasting more phone time with support and just book a Genius appointment that way I can take both computers in and get it sorted out?

which re imported the photos exactly the same way as they did initially on Migration Assistant.
And therein lies the problem. You've imported one iPhoto Library into another. When you do that every version and thumbnail is imported like a distinct photo - hence the different sizes - you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
I cannot stress enough: there is no importing involved. So, no drag and drop to the iPhoto icon, no drag and drop to the iPhoto window, no File -> Import
Just: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'

Ld:warning symbol 'jpeg_std_message_table' has differing sizes

Hi all !
I have a problem in generating my shared object.
My shared object depends on other two shared objects (libAB.so & libXY.so), of which I don't have any control (i.e., I can't modify the source code).
When I try to generate my shared object, the compiler generates the following waring:
ld:warning symbol 'jpeg_std_message_table' has differing sizes:
( file /home/ravinder/libXY.so value=0x1f0; file /home/ravinder/libAB.so value=0x1f4);
/home/ravinder/libXY.so definition taken
Even though this seems to be a warning, when i try to run my program which accesses the functions in the library "libAB.so", my code is blowing out by dumping the core.
Please help me out.
How do I overcome this problem, where I can't access the source code of the dependent libraries.
Is there any compiler option, which resolves this symbol conflict.
Is is it possible to overcome this complex symbol resolution problem?
Please help me.
Thanks in advance,
~Ravinder.

Different object files have different definitions of the object 'jpeg_std_message_table'. Likely causes of the problem:
- they were compiled using different versions of a common library.
- you have a collision between unrelated objects with the same name.
Since your program doesn't run, the differences in definition, or the collision, is important, and you must resolve it somehow.
You can run "nm" on each binary to find the files where the symbol is defined:
nm somefile | grep jpeg_std_message_table'
and look for lines that do not say UNDEF.
If the different definitions are from 3rd-party libraries, you will have to contact the supplier to find out how to resolve the issue.

Mixing memory module of different sizes in G5-8 slot machine

is there a problem with Mixing memory module of different sizes in G5-8 slot machine
I have 2gb on four slots with 512 memory chips
Can I upgrade my memory with 1gb chips in the remaining four slots.

Hi epospiech-
Yes you can.
Instructions here: Memory (DIMMs) Replacement Instructions
Luck-
-DaddyPaycheck

In Pages 5, why are page thumbnails different sizes?

So I'm using 5. And I must say I think it's brilliantly done after a long period of ******** about it. I guess I'm not asking of it anything it doesn't provide and what it does it does very well - though I'm puzzled by the behavior of selecting text via the keyboard.
Anyhow, that's not my question. I'm working with a long text document. I notice that as I work the page thumbnails become different sizes. It's subtle but it's clearly intentional. I reckon it's trying to tell me something but I don't know what. Haven't been able to find any info in the manual and was wondering if any of you clever people here might know. Thanks.

This is what I meant about how rude you are though. Your answer DOESN'T EXPLAIN ANY OF THE BEHAVIOUR myself or the other person were reporting. The only assumption that I can make is that you posted here for the sole purpose of implying that we are both mistaken or stupid.
How is this helpful at all?
How do you have 32,485 points when you are obviously more concerned with insulting people than helping them out? It puts the lie to the whole idea of "Apple Support Communities."
Also, I specifically informed you that your comments were insulting and unhelpful and politely requested you not post on this thread anymore or at least until you had some kind of actual information, yet here you are. Posting again, with no content other than the implied insult.
I'm not stupid. I know what a section break is, I know what a page break is. I'm a writer who has used innumerable word processing programs over the years and have been an IT worker for 10 years now.
I have a Pages document. It has no (or only one depending on your point of view), section(s). It has page breaks only. The pagination is set to start at "1" on the first page and proceed normally to the end of the document (300 or so pages). I am using Pages 5.5.2 on a brand new iMac. I have NONE of the previous or older versions/types of Pages on my computer.
The pages thumbnails on the side, do actually CHANGE SIZE randomly as I am editing the document. These differing sizes are NOT CORRELATED WITH THE BEGINNING OR ENDING OF SECTIONS. These size changes are also NOT CORRELATED WITH THE PAGE BREAKS (in case you were about to argue the similarity of page breaks and section breaks). As I work through the document and scroll up and down editing here or there, the size of the thumbnails RANDOMLY CHANGE SIZE. Sometimes this is correlated with me working on a section, sometimes I can work on a section and no change happens at all. The thumbnails that change size often change back again when I scroll back to them later on.
So please ... Try to act like a decent human being and either help out, or go away. STOP POSTING THAT WE ARE WRONG, when you DON'T in fact know we are wrong. STOP INSULTING ME by assuming I am stupid.
Why are you even here if you don't want to actually HELP anyone?
To anyone else reading this: I am having a real bad time with this fellow who is just the most insulting person I have met for a while, however many of my posts about him are being deleted. If anyone knows (including the mods of this forum) of the proper way to REPORT or get rid of a troll/abuser like him on Apple Support Communities or a place to report his behaviour, please let me know.

Photo Gallery thumbnails in business catalyst render in different sizes in different browsers

Photo Gallery thumbnails in business catalyst render in different sizes in safari and chrome but are fine in firefox. What is the issue with Safari? I have tried the different algorithm options such as fill_proportional etc and firefox is the only browser that displays correctly. I thought safari was the most standards compatible browser - what's the problem here?

Hi,
If you have seperate XML file but with the same basic structure then you can change the XML a Spry dataset refers to and regenerate the spry region without reloading the full page.
So on my photo gallery page I can change the album the photos are shown from via the seturl sprydata function as below. dsPhotos being my Spry dataset that points to the relevant XML dataset with my image references and captions etc. My XML is actually dynamically generated from Picasa RSS feeds (and RSS feeds are XML) but the principle will be the same with your static XML.
First I add an event listener for when someone clicks on an album (the li tag within my div with the id "albums" holds a photo and title for each album.)
function Albums()
var myalbums = Spry.$$("#albums li", "TabbedPanels1")
var rows = dsAlbums.getData();
var setListener = function( element, value )
Spry.Utils.addEventListener( element, "click", function(){ showAlbum( value ); },false );
for( var i = 0, length = myalbums.length; i < length; i++ )
setListener( myalbums[i], i );
Then this is the code which changes the photo album to be shown. (when the user clicks the relevant album)
function showAlbum(i)
pauseShow();
pImage = 'No';
var rows = dsAlbums.getData();
var albumid = rows[i]["albumid"];
var url = "xml/PicasaAphotoFeed.asp?albumid=" + albumid;
dsPhotos.setURL(url);
dsPhotos.loadData();
var rowcount = dsAlbums.getRowCount() - 1;
var nextalbum;
var navnext;
var n;
The page is here www.thehmc.co.uk/photo5.html is you want to see it in context.
In your case showAlbum would switch between Frank.xml or Wolfie.xml depending on how you decide to name your xml datasets.
Regards
Phil

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

How do you can change the page size of a pdf in MAC? I have multiple pdf documents of different sizes that I want to combine.

Help. How do I change the page size of a pdf in MAC? I have multiple pdf documents in varying sizes I would like to combine and print.

There's no real need to do that. A PDF can have pages of different sizes.
On Fri, Jun 6, 2014 at 4:11 AM, christine rambo <[email protected]>

Library & Vault significantly different sizes

Similar Messages

Maybe you are looking for