Libre ~ Error 2038 "failed to open the file"

Good morning.
I have a Libre-eBook reader Pro.
I have downloaded and synced from Kobo to my Libre with no problems.
But when I try to download ebooks from the public library they download and open in Digital Editions just fine. I drag and drop them into the bookshelf marked Libre-eBook Reader Pro.
They show up when I turn on my ebook, but when I try to open them I get the 'failed to open the file'.
I was also getting the Error 2038 in Digital Editions when I did the drag and drop thing. I read through the forum and went through the steps recommended for the Nook ~ deleting the digital editions folder on my ebook and having Adobe reauthorize it. I no longer get the 2038 error message in Adobe, but I am still unable to open the books from the library.
I have tried deleting the books from ereader and ADE and redownloading from the Library. Didn't help.
Any other suggestions?
Thanks.
Heather

Hi Ambs101010,
Based on my research, the error can be caused by that the machine.config file is incorrect or corrupted. Please use the following steps to troubleshoot the issue and check if the error still occurs.
1. Open the machine.config in Visual Studio and check if there is any syntax errors. If syntax errors exist, modify the machine.config file directly. For more details, please review this similar
thread.
2. If the error still persists, please follow the steps to replace the machine.config file. Another alternative method is to replace the current machine.config with the machine.config file from another computer.
      a. Go to the folder C:\windows\Microsoft.NET\Framework\v2.0.50727\CONFIG
      b. Rename the file machine.config to machine.config.old
      c. Make a copy of the file machine.config.default and rename the copy to be machine.config
      d. If your Operating System is 64-bit, go to the folder C:\windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG and repeat the above steps
      e. Reboot your computer
Thanks,
Lydia Zhang

Similar Messages

After Effects CS3 error: file not found -43 and TIFFIO failed to open the file

Hello
I am experiencing a problem with AE CS3.
I have several TIFF sequences (with alphas) that are giving me a headache. When I import them into AE, I get an "AEGP Plugin TIFFIO: Failed to open the file" error.
I researched the forums and found that this could be related to odd formatting of the source media (my TIFF sequence). I created these TIFFs in Maya 2008 and I have imported other sequences made with Maya into AE with no issues.
Just to be sure, I created a Photoshop droplet that re-saved my TIFFs as Photoshop TIFFs with the same names.
I re-imported the new Photoshop TIFF sequences (still with alphas) into AE CS3, and I get the same error.
Any ideas? I don't know what to do next.
Thanks,
-------------S

Your USB drive may have had a weird character in it's name.
AE can't read CMYK images, that is usually the problem.
Imported images do not have to conform to any specific sizes (unless you want to go over 30,000 x 30,000 pixels.)
- Jonas Hummelstrand
http://generalspecialist.com/

Content generation error. Failed to open the InDesign file.

Hey all -
In importing an article to a folio, I just received this error:
"Content generation error.
Failed to open the InDesign file. Please confirm the file can be opened in InDesign."
The file is open right now in InDesign. I can close it and reopen it with no errors.
I've tried resaving the article to a new file. No help.
I tried creating a new folio and importing the article there. No help.
All links are good. It's a simple file with images, a scrolling pane, and some buttons that link to other articles.
Anyone else run into this problem? Any solutions?
Thanks!

Im getting this error also....?
Want to avoid inporting each artical on at a time. Need to import multiple articals at once.
Thanks.

SP2-0310: Failed to open the file "coreins.sql"

Hi, when i try to install apex 3.0... on oraclexe , in the file install****.log show this error SP2-0310: Failed to open the file "coreins.sql"

You will find the answer to your problem in this forum..
Database Installation

Pls Help!-'Failed to open the file'

what do you do when an error 'failed to open the file' shows
up when you try to open something...?
i'm pretty sure that i am using the same version of flash as
the one i used before to create this file.. but just on a different
mac.
please
help!!!!　(ﾉ△･｡)

yumibobcat wrote:
> what do you do when an error 'failed to open the file'
shows up when you try to
> open something...?
> i'm pretty sure that i am using the same version of
flash as the one i used
> before to create this file.. but just on a different
mac.
> please help!!!!?(????)
>
If you are using the same version the file was made in then
the only thing
left which give such error is a corrupted FLA. Beyond
recovery once fail to
open.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

'failed to open the file'

what do you do when an error 'failed to open the file' shows
up when you try to open something...?
i'm pretty sure that i am using the same version of flash as
the one i used before to create this file.. but just on a different
mac.
please
help!!!!　(ﾉ△･｡)

You will find the answer to your problem in this forum..
Database Installation

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

Error 25541 failed to open xml file c:\windows\microsoftnet\framework\v2.0.50727\config\machine.config, system error -2147024786

Can someone help me resolve this error which is encountered while installing office 2010. So far support for my issue has been weak to non responsive!

Hi,
The .NET Framework 3.5 can fail to install on a system where MSXML is not properly registered. There is a custom action that runs during .NET Framework 3.5 setup that tries to use some APIs in MSXML to modify some information in the web_mediumtrust.config
file that is a part of the .NET Framework 2.0. In the cases that we've seen of this issue so far, one of the MSXML CLSID values was somehow unregistered on the system, and that causes this custom action to fail.
You can use one of the following options to work around this issue if you encounter it during .NET Framework 3.5 setup. Note that these workarounds are only useful for this exact error and HRESULT value. They will not help fix all possible .NET
Framework 3.5 setup failures.
Re-register msxml3.dll by running regsvr32 msxml3.dll
Re-install MSXML3 by downloading and installing the package from
http://www.microsoft.com/downloads/details.aspx?familyid=28494391-052b-42ff-9674-f752bdca9582
For more information about details about the root cause of this issue, you can refer to this article:
http://blogs.msdn.com/b/astebner/archive/2007/11/01/5826719.aspx
Hope that helps.

Failed to open package file due to error 0x800C0006 "The system cannot locate the file in C# code.

Hi, Am facing issue when I try to run SSIS package via C# code, I have given full access to all the folder in which the package is available.
In the below line am getting error,
using Microsoft.SqlServer.DTS.Runtime;
Application app=new Application();
Package package=null;
package=app.LoadPackage("PackageFullPath",null) --error line
Failed to open package file "C:\SSIS\Package.dtsx" due to error 0x800C0006 "The system
cannot locate the object specified.". This occurs when loading a
package and the file cannot be opened or loaded correctly into the XML document

Are you trying to run this code from job or something? Check if account executing the package has access to the path. Also check if path value passed is correct. If its a remote system path pass it in UNC format (ie //machine/...)
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Infoviewer Error - Failed to open the connection.

Hi,
I get the below error when tring to view a report from infoviewer?
Failed to open the connection. Products.rpt Details: [Database Vendor Code: 12154 ]
Also where can i find the log files for CMC and infoviewer?
Thanks in advance

Hi! I'm getting a similar error.
Re: 08004:oracleodbcoraora-12154: TNS: could not resolve the connect ....
Posted: Aug 22, 2011 5:56 PM in response to: John Fleming
Edit Reply
I am receiving a similar error.
Failed to open the connection.
Details: 08004:OracleODBCOraORA-12154: TNS:could not resolve the connect identifier specified Database Vendor Code: 12154
I've seen all sorts of discussion on the intertubes about possible fixes however, none stated are practical or they do not address my error specifically. I've exhausted resources on the net as well as those available to me.
I'm currently running SAP Crystal Reports 2011 on WIN7 64bit and using Oracle in OraClient 10g_home1.
Please let me know what insight you have. I cannot roll back to previous versions of Windows nor less encryption.
Thank you for your time.
Thank you, again, for your time.
Jeff Embree.

Error"Failed to open the connection" - Named Instance of SQL Server 2005

"Failed to open the connection" error, when connecting to the Named Instance of SQL Server 2005
The report is throwing error, when changing the logon information dynamically through C#.
Code
     string reportPath = @"D:\NET\TestReport\TestReport.rpt";
     ReportDocument reportDocument = new ReportDocument();
     reportDocument.Load(reportPath);
     foreach(CrystalDecisions.CrystalReports.Engine.Table table in tables)
          TableLogOnInfo tableLogonInfo = table.LogOnInfo;
          tableLogonInfo.ConnectionInfo.ServerName = @"TestServer\Instance1"; //Connnecting to Named instance of SQL Server 2005
          tableLogonInfo.ConnectionInfo.UserID = "sa";
          tableLogonInfo.ConnectionInfo.Password = "password";
          tableLogonInfo.ConnectionInfo.DatabaseName = "TEST_DB";
          table.ApplyLogOnInfo(tableLogonInfo);
     crystalReportViewer1.ReportSource = reportDocument;
Error Message
     Failed to open the connection.
     Failed to open the connection.
     C:\DOCUME1\PUGALE1\LOCALS~1\Temp\{DF9593A5-5C80-4CBC-ABC3-EC4EF204A7EB}.rpt
The error is occuring only whenever i am connecting to the Named Instance of SQL Server 2005.
Thanks in Advance
Edited by: pugalendran p on Feb 2, 2009 10:32 AM
Edited by: pugalendran p on Feb 2, 2009 10:43 AM

Hi,
Following solution might help you to resolve the issue.
Solution1:
Issue happens because universe connection to the Database is not responding and the Data Source Name is not configured to write SQL Server 2005 database.
Resolution
Created new DSN connection under SYSTEM DSN to SQL Server 2005 Database.
Import the universe from the designer.
Go to File->Parameters.
Edit Connection.
On the Database Middleware Page expand SQl Server 2005->Select SQL Server 2005 driver.
Change the DSN to new DSN connection
Test the connection.
Save the Universe and Export it to the repository.
Solution2:
I am taking Oracle as an example over here.
This can be caused when the SQLNET.ora is located in a remote location using mapped drives.
Resolution
To resolve,
check the registry [HKLM\SOFTWARE\ORACLE] you should see a folder called HOME0
look for any paths that contain a mapped drive partition
Change the mapped drive letter to a UNC path (
server\folder)
Open a command prompt and do a tnsping using the tnsname and verify the location of the SQLNET.ora or TNSNAMES.ora
If the path is not updated to the new path
Reboot the server
Regards,
Sarbhjeet Kaur

Getting Error:Failed to open the connection while calling crystal report

I am getting the below error while calling the crystal report from dot net app. I am using OLEDB to connect to database. It is working perfectly in our DEV environment but as soon as I move it to production information after changing the logon information in the report it start giving the below error.
Failed to open the connection.C:\WINDOWS\TEMP{C2FD97D9-2ADE-41BB-88FF-23A4DF20BC6F}.rpt
Details: [Database Vendor Code: 17 ]

Are you able to connect to the database from the production machine using a UDL file?
If you haven't tried this, here's how to do it. Take these steps on the machine that is hosting the application. Create a new text file on the desktop. Change the file extension to ".udl" (without the quotes). Double-click on this to bring up the OLEDB connection test: start on the Provider tab and select the appropriate provider. Click "Next" and on the following tab enter your connection information. Click the "Test Connection" button to test the connection. Does it connect to the database successfully?
If you click on "OK" to close the dialog and then open the UDL file with Notepad, you should see an OLEDB connection string. In this string should be the same property values for server, database, user id and password which you are providing through your application. If they are not the same, modify your application to use these values.
If testing your connection information with the UDL file works but your application is still failing when using the same credentials, try profiling or tracing the database. Do you see connection attempts from the application? Are there any errors?
If you're impersonating, have you set up windows authentication correctly for both the application and the database?

XML Report output giving error "word cannot open the file because....

Hi All,
Greetings!
I have a standard report, 'Payables Posted Invoice Register".
The report was going in to warning beacuse of some Invalid characters in the Data.
I corrected the invalid characters and then ran the report ; it completed fine.
But now when I try to open the report output, the output is not getting open but its allowing me to save the file.
When I save it on my local machine and try to open it, I am getting an error as "word cannot open the file because it is larger than 512 megabytes".
The document size showing is 664MB when I saved it on my machine. And the output type of the report is RTF and not PDF.
Can anybody please help?
Thanks,
Sachin

not sure, if the Microsoft word has limitation of file size.

Cannot open the file due to an unknown error. (FRM0007)

When open deski document in 3-tier mode, the following error is showed"
"Cannot open the file due to an unknown error. (FRM0007)"
-It happens for all deski documents
-It works ok when opening in 2-tier mode.
-It happens on some specific userID.
-It happens on tow computers
The following is log that may be helpful.
<busobj_2812_xxx>
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::AutomaticRefresh: 0.015

Hi Emily,
It seems to be windows profile related issue could you please try to delete the user preferences under the registries for which you are getting the issue for the particular users.
Note: The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry.For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe).
1. Go to start programs->run->RegEdit.
2. Then go to HKEY_CURRENT_USER< Software< BusinessObjects<Suite 11.5<Business Objects.
3. Select the user preferences and delete the same.
Regards,
Sarbhjeet Kaur

Error"Cannot open the file due to an unknown error. (FRM0007)" in XI3.0

When open deski document in 3-tier mode, the following error is showed"
"Cannot open the file due to an unknown error. (FRM0007)"
-It happens for all deski documents
-It works ok when opening in 2-tier mode.
-It happens on two computers
-It happens on some specific userID,and only happens when two deski are opened, one is open by specific userA,the the other is opened by userB or both are opened by userA
it is、
　DeskI - opened by UserA
　DeskI - opened by UserA
or、
　DeskI - opened by UserA　
DeskI - opened by UserB
The following is log that may be helpful.
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::AutomaticRefresh: 0.015

Hi Emily,
Following solution might help you to resolve the issue.
1.You create your Deski report.
2.Save as the report (with or without 'Save for all users'- makes little difference at his stage).
3.Export the document to the repository.
4.Save as the report once again with the option 'Save for all users'(overwrite the copy that already exists on the local machine).
5.Log into Info view and delete the report.
6.Log back into Desktop Intelligence and try to open the report.
Regards,
Sarbhjeet Kaur

Libre ~ Error 2038 "failed to open the file"

Similar Messages

Maybe you are looking for