Libreoffice doesn't start as user
When I'm logged in as my primary user(myself), libreoffice just won't start. It used to work fine, but it won' start any more. No errors, it just doesn't do anything. I've renamed any config dir/file of libreoffice in my home dir, but it still won't start. On another user, "test", it boots up fine.
I'm using gnome 3 by the way.
jelly wrote:Please run soffice from a command line and pate errors
I did(actually, I ran "libreoffice" from command line), but as I said, "no errors".
Olive wrote:is .config present and writable? do mv .config dot_config.bak and try again. If the problem persists, do the same with all .* file until you find the culprit.
.config is present, and writable, since libreoffice does write something in it when it "tries" to start up. I already renamed my .libreoffice dir, but I'll try that too.
Similar Messages
-
Illustrator CS2 Doesn't Start For User on Windows 2000
I've recently installed Adobe Illustrator CS2 on a Windows 2000 system. When I start the product when logged in as the Administrator, it starts fine. However, when I start the product logged in as a user, it goes thru the startup process, displays all of the various tool windows, and then before it gets to the first time window, it just closes. No error messages, nothing in the Windows system or application log, it just closes the same windows it just opened and then exits.
I've tried setting the permissions on the folders listed in the Windows Rights KB entry, with no effect. I've tried installing a postscript printer, setting full rights on it, and using it as the default for the user.
Does anyone know what file right, user priviledge, or other feature might be causing the problem? Thanks.I wasn't aware that it required Power User rights. This is somewhat of a high security environment, and that can be difficult.
Do you, by chance, know what features of Power User rights are needed? I can perhaps grant those to this user, and make it work.
Do you think it is having a problem accessing portions of the registry, or files in certain folders, or something else?
Thanks for your help. -
[SOLVED] systemd/cron as user: timer doesn't start after boot
Hello,
I've tried to follow the wiki's systemd/cron functionality article to have a systemd service to run hourly.
Everything seems to be working ok, except that the hourly timer doesn't start automatically : I have to issue a
systemctl --user timer-hourly.timer start
command every time I start the machine to get the timer running.
Can you help me understand what I'm missing to get the (user) timer to start automatically after boot?
Thanks!
My setup consists of the following files:
/home/myuser/.config/systemd/user:
drwxr-xr-x 2 myuser users 4096 Jun 25 17:30 basic.target.wants/
-rw-r--r-- 1 myuser users 217 Jun 25 10:08 db_backup.service
-rw-r--r-- 1 myuser users 232 Jun 25 10:08 test.service
-rw-r--r-- 1 myuser users 61 Jun 19 12:14 timer-hourly.target
drwxr-xr-x 2 myuser users 4096 Jun 25 10:10 timer-hourly.target.wants/
-rw-r--r-- 1 myuser users 134 Jun 19 12:14 timer-hourly.timer
/home/myuser/.config/systemd/user/basic.target.wants/:
lrwxrwxrwx 1 myuser users 50 Jun 25 10:08 timer-hourly.timer -> /home/myuser/.config/systemd/user/timer-hourly.timer
/home/myuser/.config/systemd/user/timer-hourly.target.wants/:
lrwxrwxrwx 1 myuser users 49 Jun 13 15:51 db_backup.service -> /home/myuser/.config/systemd/user/db_backup.service
lrwxrwxrwx 1 myuser users 44 Jun 25 10:10 test.service -> /home/myuser/.config/systemd/user/test.service
timer-hourly.timer:
[Unit]
Description=Hourly Timer
[Timer]
OnBootSec=5min
OnCalendar=hourly
Unit=timer-hourly.target
[Install]
WantedBy=basic.target
timer-hourly.target:
[Unit]
Description=Hourly Timer Target
StopWhenUnneeded=yes
test.service:
[Unit]
Description=Run a test (echo) job every hour
Wants=timer-hourly.timer
[Service]
Nice=19
IOSchedulingClass=2
IOSchedulingPriority=7
ExecStart=/usr/bin/python /home/myuser/test_service.py
[Install]
WantedBy=timer-hourly.target
db_backup.service:
[Unit]
Description=Backups databases
Wants=timer-hourly.timer
[Service]
Nice=19
IOSchedulingClass=2
IOSchedulingPriority=7
ExecStart=/home/myuser/source/db_backups/db_backup.sh
[Install]
WantedBy=timer-hourly.target
test_service.py is a simple python script that appends the current time to a file, to check if the service is being run by the timer. (it is after I start the timer after boot, and runs correctly every hour)
db_backup.sh is a script that dumps a database into a text file in a mercurial repository, commits the change and pushes it to backup locations.
Last edited by fede (2014-06-25 21:06:09)Have you tried this:
systemctl --user enable timer-hourly.timer -
[LXDE] doesn't start as normal user...
Hello!
This is the problem:
I've installed lxde and openbox, but when I try to log in lxde (using kdm or simply typing "startx" or "startlxde") it doesn't start and nothing happens. With the root account I can use lxde, and all is ok.
Please help me
Stefanocheck out your permissions on openbox folders.
To see your folder permissions:
ls -la
To change the folder's owner from root to your user:
chown -Rv user_name folder
Try this... -
How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
MarceloIf there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac -
RT app doesn't start on power-up or re-boot
Hi Again, Gang:
This one is stumping me. I've finished a cRIO application, and am now in the process of getting it ready for distribution. The RT part of the app runs fine when I upload it from the host PC. When I set the app to run at startup from NV RAM, it doesn't run. Well, actually, to make matters worse--it DID run ONCE! This morning I powered the cRIO, then did other things for a while. I later looked at the unit and saw the user LED was flashing the sequence that says it's working.
I've read through the troubleshooting stuff on the web site. I've FTPd into the box and it looks like it's set up right. The dip switches are all off. I've waited for 10 mins to see if comes up after a while. I've experimented with the FPGA upload settings to see if that's the issue. (The RT won't get very far if the FPGA doesn't start) Is it possible that something with the shared variable engine is holding it up?
I'm about out of ideas. I really hope that someone can give me some!
Thanks in advance!
Rogerhi!!
Have you got any solutions. it seems there some bugs in lv2010. we are facing similar problems. some times every thing works but after restart it shows some error(blinking of yellow LED on RT).some time variable are not being published .i am working with mutltiple target in a single project. i have tried all options like auto deploy variable(ON/OFF)
seperate libraries for each target eventhough applications is similar for all targets. Just shareing my experience(pain)
Regards
Nageswar -
My MacBook Pro 15,4" doesn't start at all!
Hi everyone!
Today morning, normal day, after having my MacBook Pro charging all night (as always), I took it (without any cables) in the kitchen, in order to, very surprising, turn it on!
But nothing happens!! Checking battery status: ok (new), removing it and trying without, still nothing. I tried all reset techniques, as well as Ctrl + Cmd + Start button. But still nothing.
What is happening?
When I press the button, I hear the DVD player making his little "clac-clac", the fan is starting, and the light as well, but as soon as I take my finger off the start button, it stops again! If I keep my finger longer on the button, it stops as well after a while (normal forced stop), but the "gong" never sound.
Can anyone help me with this? Where does it come from? I'm a computer technician, and fixed a lot of laptops, but when it comes to Apple, I panic, and I don't know what to do anymore! I'm always a bit scared to open it myself...
Maybe I should add that it's making some noise on the right fan since 2 months (as if a plastic piece was blocked inside), some kind of "clac, clac, clac", and it was getting really warm sometimes. The DVD-player is also a bit "curved", and it's problematic to extract the discs sometimes.
Thanks in advance for your help!
Cheers,
Ron.Hi everyone!
Thanks for the answers.
@Advanced User: I haven't tried that yet, but I will tonight. And I found a Store in my town, in case I cant solve it myself.
@eww: I always buy original parts, even more by Apple. Of yourse I tried without the battery. All the basic tests were done. I also opened the machine and test electrically if anything was interupted. But I couldn't find anything. I must say my son (2 years old) found it very funny last week-end to play piano (pretty strongly) on the keyboard of the MB... But I don't think he broke something, otherwise I'd be really disappointed in a 2000€ notebook...
The exact model of the MacBook is MB133D/A, and I cant access any System Profiler, because the MacBook.... doesn't start! The battery was still holding 3 hours.
<Edited by Host> -
Maxdb doesn't start error -24994 runtime environment
Hello.
The server with system was fall down (there was problems with
electricity). After turn on maxdb doesn't start (only admin state, it
can't go to online). There is message -24994 Runtime environment error
[db_online -f],4, connection broken. Files knldiag and knldiag.err you can see below.
knldiag:
Date Time TID(hex) Typ MsgID Label Message-Text
2008-09-02 12:26:43 0x308 19707 CONNECT WINSOCK: 2.0, SQLTCP-DLL: 7.6.0
2008-09-02 12:26:43 0x308 20233 RTE Dump of all kernel parameters start
2008-09-02 12:26:43 0x308 20206 RTE Using mode NORMAL for data volume 1
2008-09-02 12:26:43 0x308 20206 RTE Using mode NORMAL for data volume 2
2008-09-02 12:26:43 0x308 20206 RTE Using mode NORMAL for data volume 3
2008-09-02 12:26:43 0x308 20234 RTE ADMIN=1
2008-09-02 12:26:43 0x308 20234 RTE AKDUMP_ALLOWED=YES
2008-09-02 12:26:43 0x308 20234 RTE ALLOW_MULTIPLE_SERVERTASK_UKTS=NO
2008-09-02 12:26:43 0x308 20234 RTE AUTHENTICATION_ALLOW=
2008-09-02 12:26:43 0x308 20234 RTE AUTHENTICATION_DENY=
2008-09-02 12:26:43 0x308 20234 RTE AUTOSAVE=1
2008-09-02 12:26:43 0x308 20234 RTE AUTO_RECREATE_BAD_INDEXES=NO
2008-09-02 12:26:43 0x308 20234 RTE BACKUPRESULT=1
2008-09-02 12:26:43 0x308 20234 RTE BACKUP_BLOCK_CNT=64
2008-09-02 12:26:43 0x308 20234 RTE BACKUPHISTFILE=dbm.knl
2008-09-02 12:26:43 0x308 20234 RTE BACKUPMED_DEF=dbm.mdf
2008-09-02 12:26:43 0x308 20234 RTE CACHE_SIZE=174720
2008-09-02 12:26:43 0x308 20234 RTE CALLSTACKLEVEL=0
2008-09-02 12:26:43 0x308 20234 RTE CATCACHE_MINSIZE=262144
2008-09-02 12:26:43 0x308 20234 RTE CAT_CACHE_SUPPLY=10000
2008-09-02 12:26:43 0x308 20234 RTE CHECKDATA=1
2008-09-02 12:26:43 0x308 20234 RTE CHECK_BACKUP=NO
2008-09-02 12:26:43 0x308 20234 RTE CHECK_COMMON=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_CONVERTER=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_DATACACHE=NO
2008-09-02 12:26:43 0x308 20234 RTE CHECK_DATAINDEX=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_DATAPAGELOG=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_FBM=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_HASHED_RESULTSET=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_IOMAN=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_KB_REGIONS=NO
2008-09-02 12:26:43 0x308 20234 RTE CHECK_LOCK_SUPPLY=NO
2008-09-02 12:26:43 0x308 20234 RTE CHECK_LOCK=NO
2008-09-02 12:26:43 0x308 20234 RTE CHECK_LOGHISTORY=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_LOGPAGE=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_LOGTRANS=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_LOGVOLUME=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_REGIONS=NO
2008-09-02 12:26:43 0x308 20234 RTE CHECK_SRVTASKS=0
2008-09-02 12:26:43 0x308 20234 RTE CHECK_TABLE_WIDTH=NO
2008-09-02 12:26:43 0x308 20234 RTE CHECK_TASK_SPECIFIC_CATALOGCACHE=NO
2008-09-02 12:26:43 0x308 20234 RTE CHECK_TRANSLIST=NO
2008-09-02 12:26:43 0x308 20234 RTE CHECK_TREE_LOCKS=NO
2008-09-02 12:26:43 0x308 20234 RTE CHECK_TREE=NO
2008-09-02 12:26:43 0x308 20234 RTE CLUSTERED_LOBS=NO
2008-09-02 12:26:43 0x308 20234 RTE CLUSTER_WRITE_THRESHOLD=80
2008-09-02 12:26:43 0x308 20234 RTE COLUMNCOMPRESSION=YES
2008-09-02 12:26:43 0x308 20234 RTE _COMMENT=
2008-09-02 12:26:43 0x308 20234 RTE CONTROLPASSWORD=***
2008-09-02 12:26:43 0x308 20234 RTE CONTROLUSERID=CONTROL
2008-09-02 12:26:43 0x308 20234 RTE CONVERTER_REGIONS=16
2008-09-02 12:26:43 0x308 20234 RTE DATABASEFULL=1
2008-09-02 12:26:43 0x308 20234 RTE DATACACHE_RGNS=64
2008-09-02 12:26:43 0x308 20234 RTE DATA_IO_BLOCK_COUNT=64
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_GROUPS=1
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_MODE_0001=NORMAL
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_MODE_0002=NORMAL
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_MODE_0003=NORMAL
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_NAME_0001=E:\sapdb\DFS\sapdata\disk001\DISKD0001
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_NAME_0002=E:\sapdb\DFS\sapdata\disk002\DISKD0002
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_NAME_0003=E:\sapdb\DFS\sapdata\disk003\DISKD0003
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_SIZE_0001=3840000
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_SIZE_0002=3840000
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_SIZE_0003=3840000
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_TYPE_0001=F
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_TYPE_0002=F
2008-09-02 12:26:43 0x308 20234 RTE DATA_VOLUME_TYPE_0003=F
2008-09-02 12:26:43 0x308 20234 RTE DATE_TIME_FORMAT=INTERNAL
2008-09-02 12:26:43 0x308 20234 RTE DBFILLINGABOVELIMIT=70L80M85M90H95H96H97H98H99H
2008-09-02 12:26:43 0x308 20234 RTE DBFILLINGBELOWLIMIT=70L80L85L90L95L
2008-09-02 12:26:43 0x308 20234 RTE DDLTRIGGER=YES
2008-09-02 12:26:43 0x308 20234 RTE DEADLOCK_DETECTION=4
2008-09-02 12:26:43 0x308 20234 RTE DEFAULT_CODE=ASCII
2008-09-02 12:26:43 0x308 20234 RTE DELAYCOMMIT=NO
2008-09-02 12:26:43 0x308 20234 RTE DELAYLOGWRITER=0
2008-09-02 12:26:43 0x308 20234 RTE DIAG_HISTORY_NUM=2
2008-09-02 12:26:43 0x308 20234 RTE DIAG_HISTORY_PATH=e:\sapdb\data\wrk\DFS\DIAGHISTORY
2008-09-02 12:26:43 0x308 20234 RTE DIAGSEM=0
2008-09-02 12:26:43 0x308 20234 RTE DWIO_AREA_FLUSH=50
2008-09-02 12:26:43 0x308 20234 RTE DWIO_AREA_SIZE=50
2008-09-02 12:26:43 0x308 20234 RTE DWLRU_TAIL_FLUSH=25
2008-09-02 12:26:43 0x308 20234 RTE ENABLE_CHECK_INSTANCE=YES
2008-09-02 12:26:43 0x308 20234 RTE ENABLE_SYSTEM_TRIGGERS=YES
2008-09-02 12:26:43 0x308 20234 RTE ERROR=3
2008-09-02 12:26:43 0x308 20234 RTE _EVENTFILE=knldiag.evt
2008-09-02 12:26:43 0x308 20234 RTE _EVENTSIZE=0
2008-09-02 12:26:43 0x308 20234 RTE EVENT=1
2008-09-02 12:26:43 0x308 20234 RTE EXPAND_COM_TRACE=NO
2008-09-02 12:26:43 0x308 20234 RTE EXTERNAL_DUMP_REQUEST=NO
2008-09-02 12:26:43 0x308 20234 RTE FBMLOW_IO_RATE=10
2008-09-02 12:26:43 0x308 20234 RTE FBM_VOLUME_BALANCE=10
2008-09-02 12:26:43 0x308 20234 RTE FBM_VOLUME_COMPRESSION=50
2008-09-02 12:26:43 0x308 20234 RTE FILEDIR_SPINLOCKPOOL_SIZE=10
2008-09-02 12:26:43 0x308 20234 RTE FORBID_LOAD_BALANCING=NO
2008-09-02 12:26:43 0x308 20234 RTE FORMATTING_MODE=PARALLEL
2008-09-02 12:26:43 0x308 20234 RTE FORMAT_DATAVOLUME=YES
2008-09-02 12:26:43 0x308 20234 RTE HASHED_RESULTSET_CACHESIZE=262144
2008-09-02 12:26:43 0x308 20234 RTE HASHED_RESULTSET=YES
2008-09-02 12:26:43 0x308 20234 RTE HEAP_CHECK_LEVEL=0
2008-09-02 12:26:43 0x308 20234 RTE HIRES_TIMER_TYPE=CPU
2008-09-02 12:26:43 0x308 20234 RTE HS_STORAGE_DLL=libhsscopy
2008-09-02 12:26:43 0x308 20234 RTE HS_SYNC_INTERVAL=50
2008-09-02 12:26:43 0x308 20234 RTE IDXFILELIST_SIZE=2048
2008-09-02 12:26:43 0x308 20234 RTE INDEX_LEAF_CACHING=2
2008-09-02 12:26:43 0x308 20234 RTE INIT_ALLOCATORSIZE=258048
2008-09-02 12:26:43 0x308 20234 RTE INSTANCE_TYPE=OLTP
2008-09-02 12:26:43 0x308 20234 RTE IOPROCSFOR_PRIO=0
2008-09-02 12:26:43 0x308 20234 RTE IOPROCSFOR_READER=0
2008-09-02 12:26:43 0x308 20234 RTE IOPROCSPER_DEV=1
2008-09-02 12:26:43 0x308 20234 RTE IOPROCSSWITCH=2
2008-09-02 12:26:43 0x308 20234 RTE JOIN_MAXTAB_LEVEL4=64
2008-09-02 12:26:43 0x308 20234 RTE JOIN_MAXTAB_LEVEL9=5
2008-09-02 12:26:43 0x308 20234 RTE JOIN_SEARCH_LEVEL=0
2008-09-02 12:26:43 0x308 20234 RTE JOIN_TABLEBUFFER=128
2008-09-02 12:26:43 0x308 20234 RTE _KERNELDIAGFILE=knldiag
2008-09-02 12:26:43 0x308 20234 RTE KERNELDIAGSIZE=800
2008-09-02 12:26:43 0x308 20234 RTE _KERNELDUMPFILE=knldump
2008-09-02 12:26:43 0x308 20234 RTE _KERNELTRACEFILE=knltrace
2008-09-02 12:26:43 0x308 20234 RTE KERNELTRACESIZE=869
2008-09-02 12:26:43 0x308 20234 RTE KERNELVERSION=KERNEL 7.6.00 BUILD 035-123-139-084
2008-09-02 12:26:43 0x308 20234 RTE LOAD_BALANCING_CHK=0
2008-09-02 12:26:43 0x308 20234 RTE LOAD_BALANCING_DIF=10
2008-09-02 12:26:43 0x308 20234 RTE LOAD_BALANCING_EQ=5
2008-09-02 12:26:43 0x308 20234 RTE LOCAL_REDO_LOG_BUFFER_SIZE=57344
2008-09-02 12:26:43 0x308 20234 RTE LOCKSUPPLY_BLOCK=100
2008-09-02 12:26:43 0x308 20234 RTE LOGABOVELIMIT=50L75L90M95M96H97H98H99H
2008-09-02 12:26:43 0x308 20234 RTE LOGFULL=1
2008-09-02 12:26:43 0x308 20234 RTE LOGSEGMENTFULL=1
2008-09-02 12:26:43 0x308 20234 RTE LOG_BACKUP_TO_PIPE=NO
2008-09-02 12:26:43 0x308 20234 RTE LOG_IO_BLOCK_COUNT=4
2008-09-02 12:26:43 0x308 20234 RTE LOG_IO_QUEUE=200
2008-09-02 12:26:43 0x308 20234 RTE LOG_MIRRORED=YES
2008-09-02 12:26:43 0x308 20234 RTE LOG_QUEUE_COUNT=1
2008-09-02 12:26:43 0x308 20234 RTE LOG_SEGMENT_SIZE=85333
2008-09-02 12:26:43 0x308 20234 RTE LOG_VOLUME_NAME_001=E:\sapdb\DFS\saplog\log01\DISKL001
2008-09-02 12:26:43 0x308 20234 RTE LOG_VOLUME_NAME_002=E:\sapdb\DFS\saplog\log02\DISKL002
2008-09-02 12:26:43 0x308 20234 RTE LOG_VOLUME_SIZE_001=256000
2008-09-02 12:26:43 0x308 20234 RTE LOG_VOLUME_SIZE_002=256000
2008-09-02 12:26:43 0x308 20234 RTE LOG_VOLUME_TYPE_001=F
2008-09-02 12:26:43 0x308 20234 RTE LOG_VOLUME_TYPE_002=F
2008-09-02 12:26:43 0x308 20234 RTE LRU_FOR_SCAN=NO
2008-09-02 12:26:43 0x308 20234 RTE MAXBACKUPDEVS=2
2008-09-02 12:26:43 0x308 20234 RTE MAXCPU=1
2008-09-02 12:26:43 0x308 20234 RTE MAXDATAVOLUMES=11
2008-09-02 12:26:43 0x308 20234 RTE _MAXEVENTS=100
2008-09-02 12:26:43 0x308 20234 RTE _MAXEVENTTASKS=2
2008-09-02 12:26:43 0x308 20234 RTE MAXGARBAGECOLL=1
2008-09-02 12:26:43 0x308 20234 RTE MAXLOCKS=300000
2008-09-02 12:26:43 0x308 20234 RTE MAXLOGVOLUMES=3
2008-09-02 12:26:43 0x308 20234 RTE MAXPAGER=64
2008-09-02 12:26:43 0x308 20234 RTE MAXRGN_REQUEST=-1
2008-09-02 12:26:43 0x308 20234 RTE MAXSERVERTASKS=28
2008-09-02 12:26:43 0x308 20234 RTE MAXTASKSTACK=1024
2008-09-02 12:26:43 0x308 20234 RTE _MAXTRANS=408
2008-09-02 12:26:43 0x308 20234 RTE MAXUSERTASKS=50
2008-09-02 12:26:43 0x308 20234 RTE MAXVOLUMES=18
2008-09-02 12:26:43 0x308 20234 RTE MAX_HASHTABLE_MEMORY=24000
2008-09-02 12:26:43 0x308 20234 RTE MAX_LOG_QUEUE_COUNT=0
2008-09-02 12:26:43 0x308 20234 RTE MAXMESSAGE_FILES=0
2008-09-02 12:26:43 0x308 20234 RTE MAX_MESSAGE_LIST_LENGTH=100
2008-09-02 12:26:43 0x308 20234 RTE MAX_RETENTION_TIME=480
2008-09-02 12:26:43 0x308 20234 RTE MAX_SERVERTASK_STACK=500
2008-09-02 12:26:43 0x308 20234 RTE MAX_SINGLE_HASHTABLE_SIZE=4000
2008-09-02 12:26:43 0x308 20234 RTE MAX_SPECIALTASK_STACK=500
2008-09-02 12:26:43 0x308 20234 RTE MBLOCKDATA_SIZE=32768
2008-09-02 12:26:43 0x308 20234 RTE MBLOCKQUAL_SIZE=32768
2008-09-02 12:26:43 0x308 20234 RTE MBLOCKSTACK_SIZE=32768
2008-09-02 12:26:43 0x308 20234 RTE MBLOCKSTRAT_SIZE=12288
2008-09-02 12:26:43 0x308 20234 RTE MCOD=NO
2008-09-02 12:26:43 0x308 20234 RTE MEMORY_ALLOCATION_LIMIT=0
2008-09-02 12:26:43 0x308 20234 RTE MEM_ENHANCE_LIMIT=0
2008-09-02 12:26:43 0x308 20234 RTE MINI_DUMP=NORMAL
2008-09-02 12:26:43 0x308 20234 RTE MINREPLYSIZE=4096
2008-09-02 12:26:43 0x308 20234 RTE MINSERVERTASKS=28
2008-09-02 12:26:43 0x308 20234 RTE MIN_RETENTION_TIME=60
2008-09-02 12:26:43 0x308 20234 RTE MONITOR_READ=2147483647
2008-09-02 12:26:43 0x308 20234 RTE MONITOR_ROWNO=0
2008-09-02 12:26:43 0x308 20234 RTE MONITOR_SELECTIVITY=0
2008-09-02 12:26:43 0x308 20234 RTE MONITOR_TIME=2147483647
2008-09-02 12:26:43 0x308 20234 RTE MPDISP_LOOPS=1
2008-09-02 12:26:43 0x308 20234 RTE MPDISP_PRIO=DEFAULT
2008-09-02 12:26:43 0x308 20234 RTE MPRGN_BUSY_WAIT=DEFAULT
2008-09-02 12:26:43 0x308 20234 RTE MPRGN_DIRTY_READ=DEFAULT
2008-09-02 12:26:43 0x308 20234 RTE MP_RGN_LOOP=-1
2008-09-02 12:26:43 0x308 20234 RTE MPRGN_PRIO=DEFAULT
2008-09-02 12:26:43 0x308 20234 RTE MPRGN_QUEUE=YES
2008-09-02 12:26:43 0x308 20234 RTE M_LOG_VOLUME_NAME_001=D:\sapdb\DFS\saplog\m_log01\M_DISKL001
2008-09-02 12:26:43 0x308 20234 RTE M_LOG_VOLUME_NAME_002=D:\sapdb\DFS\saplog\m_log02\M_DISKL002
2008-09-02 12:26:43 0x308 20234 RTE M_LOG_VOLUME_TYPE_001=F
2008-09-02 12:26:43 0x308 20234 RTE M_LOG_VOLUME_TYPE_002=F
2008-09-02 12:26:43 0x308 20234 RTE OFFICIAL_NODE=
2008-09-02 12:26:43 0x308 20234 RTE OMS_HEAP_BLOCKSIZE=10000
2008-09-02 12:26:43 0x308 20234 RTE OMS_HEAP_COUNT=1
2008-09-02 12:26:43 0x308 20234 RTE OMS_HEAP_LIMIT=0
2008-09-02 12:26:43 0x308 20234 RTE OMS_HEAP_THRESHOLD=100
2008-09-02 12:26:43 0x308 20234 RTE OMSREGIONS=0
2008-09-02 12:26:43 0x308 20234 RTE OMSRGNS=7
2008-09-02 12:26:43 0x308 20234 RTE OMS_RUN_IN_UDE_SERVER=NO
2008-09-02 12:26:43 0x308 20234 RTE OMS_STREAM_TIMEOUT=30
2008-09-02 12:26:43 0x308 20234 RTE OMS_VERS_THRESHOLD=2097152
2008-09-02 12:26:43 0x308 20234 RTE ONLINE=1
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_AGGREGATION=YES
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_FETCH_REVERSE=YES
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_FIRST_ROWS=NO
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_JOIN_HASHTABLE=YES
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_JOIN_HASH_MINIMAL_RATIO=1
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_JOIN_ONEPHASE=YES
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_JOIN_OPERATOR_SORT=YES
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_JOIN_OUTER=YES
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_JOIN_PARALLEL_MINSIZE=1000000
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_JOIN_PARALLEL_SERVERS=0
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_MIN_MAX=YES
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_OPERATOR_JOIN_COSTFUNC=YES
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_OPERATOR_JOIN=YES
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_QUAL_ON_INDEX=YES
2008-09-02 12:26:43 0x308 20234 RTE OPTIMIZE_QUERYREWRITE=STATEMENT
2008-09-02 12:26:43 0x308 20234 RTE OPTIM_CACHE=NO
2008-09-02 12:26:43 0x308 20234 RTE OPTIM_INV_ONLY=YES
2008-09-02 12:26:43 0x308 20234 RTE OPTIM_JOIN_FETCH=0
2008-09-02 12:26:43 0x308 20234 RTE OPTIM_MAX_MERGE=500
2008-09-02 12:26:43 0x308 20234 RTE OUTOFSESSIONS=3
2008-09-02 12:26:43 0x308 20234 RTE PACKETSIZE=131072
2008-09-02 12:26:43 0x308 20234 RTE PAGESIZE=8192
2008-09-02 12:26:43 0x308 20234 RTE PREALLOCATE_IOWORKER=NO
2008-09-02 12:26:43 0x308 20234 RTE PRIOBASE_COM=10
2008-09-02 12:26:43 0x308 20234 RTE PRIOBASE_IOC=80
2008-09-02 12:26:43 0x308 20234 RTE PRIOBASE_RAV=80
2008-09-02 12:26:43 0x308 20234 RTE PRIOBASE_REX=40
2008-09-02 12:26:43 0x308 20234 RTE PRIOBASE_U2U=100
2008-09-02 12:26:43 0x308 20234 RTE PRIOFACTOR=80
2008-09-02 12:26:43 0x308 20234 RTE PROTECT_DATACACHE_MEMORY=NO
2008-09-02 12:26:43 0x308 20234 RTE READAHEADBLOBS=32
2008-09-02 12:26:43 0x308 20234 RTE REQUEST_TIMEOUT=5000
2008-09-02 12:26:43 0x308 20234 RTE RESERVEDSERVERTASKS=16
2008-09-02 12:26:43 0x308 20234 RTE RESTARTTIME=600
2008-09-02 12:26:43 0x308 20234 RTE ROWRGNS=8
2008-09-02 12:26:43 0x308 20234 RTE _RTEDUMPFILE=rtedump
2008-09-02 12:26:43 0x308 20234 RTE RTE_TEST_REGIONS=0
2008-09-02 12:26:43 0x308 20234 RTE RUNDIRECTORY=e:\sapdb\data\wrk\DFS
2008-09-02 12:26:43 0x308 20234 RTE SEQUENCE_CACHE=1
2008-09-02 12:26:43 0x308 20234 RTE SERVERDBFOR_SAP=YES
2008-09-02 12:26:43 0x308 20234 RTE SESSION_TIMEOUT=900
2008-09-02 12:26:43 0x308 20234 RTE SET_VOLUME_LOCK=YES
2008-09-02 12:26:43 0x308 20234 RTE SHAREDSQL_COMMANDCACHESIZE=262144
2008-09-02 12:26:43 0x308 20234 RTE SHAREDSQL_EXPECTEDSTATEMENTCOUNT=1500
2008-09-02 12:26:43 0x308 20234 RTE SHAREDSQL=YES
2008-09-02 12:26:43 0x308 20234 RTE SHOW_MAX_KB_STACK_USE=NO
2008-09-02 12:26:43 0x308 20234 RTE SHOW_MAX_STACK_USE=NO
2008-09-02 12:26:43 0x308 20234 RTE STANDBY=1
2008-09-02 12:26:43 0x308 20234 RTE SUBTREE_LOCKS=NO
2008-09-02 12:26:43 0x308 20234 RTE SYMBOL_DEMANGLING=NO
2008-09-02 12:26:43 0x308 20234 RTE SYMBOL_RESOLUTION=YES
2008-09-02 12:26:43 0x308 20234 RTE SYSTEMERROR=3
2008-09-02 12:26:43 0x308 20234 RTE TABRGNS=8
2008-09-02 12:26:43 0x308 20234 RTE TASKCLUSTER01=tw;al;ut;2000sv,100bup;10ev,10gc;
2008-09-02 12:26:43 0x308 20234 RTE TASKCLUSTER02=ti,100dw;30000us;
2008-09-02 12:26:43 0x308 20234 RTE TASKCLUSTER03=compress
2008-09-02 12:26:43 0x308 20234 RTE TIME_MEASUREMENT=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_AK=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_ALLOCATOR=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_CATALOG=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_CLIENTKERNELCOM=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_COMMON=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_COMMUNICATION=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_CONVERTER=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_DATACHAIN=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_DATAINDEX=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_DATAPAM=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_DATATREE=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_DBPROC=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_DEFAULT=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_DELETE=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_FBM=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_FILEDIR=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_FRAMECTRL=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_INDEX=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_INSERT=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_IOMAN=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_IPC=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_JOIN=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_KSQL=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_LOCK=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_LOGACTION=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_LOGHISTORY=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_LOGPAGE=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_LOGTRANS=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_LOGVOLUME=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_LONG=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_MEMORY=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_MESSAGES=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OBJECTCONTAINER=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OBJECT_ADD=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OBJECT_ALTER=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OBJECT_FREE=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OBJECT_GET=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OBJECT=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_CONTAINERDIR=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_CONTEXT=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_ERROR=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_FLUSHCACHE=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_INTERFACE=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_KEYRANGE=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_KEY=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_LOCK=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_MEMORY=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_NEWOBJ=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_SESSION=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_STREAM=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_VAROBJECT=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OMS_VERSION=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_OPTIMIZE=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_ORDER_STANDARD=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_ORDER=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PAGER=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PAGES_BUP=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PAGES_EV=2
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PAGES_GC=20
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PAGES_LW=5
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PAGES_PG=3
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PAGES_SV=5
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PAGES_TI=2
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PAGES_US=10
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PAGES_UT=5
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PAGES=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_PRIMARY_TREE=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_QUERYREWRITE=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_RUNTIME=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_SELECT=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_SHAREDSQL=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_SQLMANAGER=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_SRVTASKS=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_STOP_ERRORCODE=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_SYNCHRONISATION=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_SYSVIEW=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_TABLE=0
2008-09-02 12:26:43 0x308 20234 RTE TRACE_TIME=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_UPDATE=NO
2008-09-02 12:26:43 0x308 20234 RTE TRACE_VOLUME=0
2008-09-02 12:26:43 0x308 20234 RTE TRANS_HISTORY_SIZE=0
2008-09-02 12:26:43 0x308 20234 RTE TRANSRGNS=8
2008-09-02 12:26:43 0x308 20234 RTE TRANS_THRESHOLD_VALUE=60
2008-09-02 12:26:43 0x308 20234 RTE UKT_CPU_RELATIONSHIP=NONE
2008-09-02 12:26:43 0x308 20234 RTE _UNICODE=YES
2008-09-02 12:26:43 0x308 20234 RTE UPDATESTAT_PARALLEL_SERVERS=0
2008-09-02 12:26:43 0x308 20234 RTE UPDATESTAT_SAMPLE_ALGO=1
2008-09-02 12:26:43 0x308 20234 RTE UPDSTATWANTED=1
2008-09-02 12:26:43 0x308 20234 RTE USED_MAX_LOG_QUEUE_COUNT=1
2008-09-02 12:26:43 0x308 20234 RTE USESELECTFETCH=YES
2008-09-02 12:26:43 0x308 20234 RTE USEVARIABLEINPUT=NO
2008-09-02 12:26:43 0x308 20234 RTE USEASYNC_IO=YES
2008-09-02 12:26:43 0x308 20234 RTE USE_COROUTINES=YES
2008-09-02 12:26:43 0x308 20234 RTE USE_FIBERS=YES
2008-09-02 12:26:43 0x308 20234 RTE USEIOPROCS_ONLY=NO
2008-09-02 12:26:43 0x308 20234 RTE USE_MEM_ENHANCE=NO
2008-09-02 12:26:43 0x308 20234 RTE USE_OPEN_DIRECT=NO
2008-09-02 12:26:43 0x308 20234 RTE USE_SYSTEM_PAGE_CACHE=YES
2008-09-02 12:26:43 0x308 20234 RTE UTILITYPROTFILE=dbm.utl
2008-09-02 12:26:43 0x308 20234 RTE UTILITY_PROTSIZE=100
2008-09-02 12:26:43 0x308 20234 RTE VOLUMENO_BIT_COUNT=8
2008-09-02 12:26:43 0x308 20234 RTE WORKDATASIZE=8192
2008-09-02 12:26:43 0x308 20234 RTE WORKSTACKSIZE=8192
2008-09-02 12:26:43 0x308 20234 RTE XP_CONVERTER_REGIONS=0
2008-09-02 12:26:43 0x308 20234 RTE XP_DATA_CACHE_RGNS=0
2008-09-02 12:26:43 0x308 20234 RTE XP_MAXPAGER=0
2008-09-02 12:26:43 0x308 20235 RTE Dump of all kernel parameters done
2008-09-02 12:26:43 0x308 19841 DIAGHIST Backup of diagnostic files is in progress
2008-09-02 12:26:43 0xE8C WRN 20190 RTE Unexpected CPU timer leaps, timer type ignored
2008-09-02 12:26:44 0x308 19842 DIAGHIST Backup of diagnostic files has finished
2008-09-02 12:26:44 0x308 19600 VERSION 'Kernel 7.6.00 Build 035-123-139-084'
2008-09-02 12:26:44 0x308 19600 VERSION 'W32/INTEL 7.6.00 Build 035-123-139-084'
2008-09-02 12:26:44 0x308 19769 INFO Starting SERVERDB: 'DFS'
2008-09-02 12:26:44 0x308 19770 INFO SERVERNODE: 'autaris'
2008-09-02 12:26:44 0x308 19771 INFO Process ID: 2216
2008-09-02 12:26:44 0x308 19773 INFO Date: 2008-09-02
2008-09-02 12:26:44 0x308 19772 INFO Owner: 'SYSTEM'
2008-09-02 12:26:44 0x308 19774 INFO Product suite: 'Enterprise'
2008-09-02 12:26:44 0x308 19806 INFO Machine: 'Intel IA32 level f revision 2b01'
2008-09-02 12:26:44 0x308 19783 INFO Processors: 1 ( logical: 2 )
2008-09-02 12:26:44 0x308 19782 INFO Fiber: 'YES'
2008-09-02 12:26:44 0x308 19776 INFO Max virtual memory: 2047 MB
2008-09-02 12:26:44 0x308 19777 INFO Total physical memory: 4095 MB
2008-09-02 12:26:44 0x308 19778 INFO Available physical memory: 3428 MB
2008-09-02 12:26:44 0x308 20219 RTE Memory allocation not limited
2008-09-02 12:26:44 0x308 20220 RTE System page cache usage enabled
2008-09-02 12:26:44 0x308 19692 TCLUSTER tw;al;ut;2000sv,100bup;10ev,10gc;ti,100dw;30000us;compress
2008-09-02 12:26:44 0x308 19693 TCLUSTER number of 'BUP': 0
2008-09-02 12:26:44 0x308 19693 TCLUSTER number of ' DW': 64
2008-09-02 12:26:44 0x308 19693 TCLUSTER number of ' US': 50
2008-09-02 12:26:44 0x308 19693 TCLUSTER number of ' SV': 28
2008-09-02 12:26:44 0x308 19693 TCLUSTER number of ' EV': 2
2008-09-02 12:26:44 0x308 19693 TCLUSTER number of ' GC': 1
2008-09-02 12:26:44 0x308 19692 TCLUSTER Total Number of UKT 7
2008-09-02 12:26:44 0x308 19692 TCLUSTER Number of UKT with User Tasks 1
2008-09-02 12:26:44 0x308 19860 MEMORY I/O buffer cache: 174720 Pages allocated
2008-09-02 12:26:44 0x308 19811 EVENTING Suppressing output to 'knldiag.evt' 0 pages
2008-09-02 12:26:44 0x308 19812 EVENTING Eventbuffer 100 events 2 tasks
2008-09-02 12:26:44 0xB94 19821 TASKING Thread 2964 starting
2008-09-02 12:26:44 0x308 19831 TRACE_IO Configured MAXMESSAGE_FILES:0
2008-09-02 12:26:44 0x308 19832 TRACE_IO Disabled: No TraceMessagefiles wanted
2008-09-02 12:26:44 0xBA0 19688 THREAD CLOCK thread started
2008-09-02 12:26:44 0x774 19688 THREAD REQUESTOR thread started
2008-09-02 12:26:44 0xBFC 19688 THREAD ASYNC0 thread started
2008-09-02 12:26:44 0xBE8 19688 THREAD TIMER thread started
2008-09-02 12:26:44 0xB7C 19821 TASKING Thread 2940 starting
2008-09-02 12:26:44 0xB88 20213 RTE CONSOLE thread started
2008-09-02 12:26:44 0xE4 19821 TASKING Thread 228 starting
2008-09-02 12:26:44 0xE0 19821 TASKING Thread 224 starting
2008-09-02 12:26:44 0xB78 19821 TASKING Thread 2936 starting
2008-09-02 12:26:44 0x4F8 19821 TASKING Thread 1272 starting
2008-09-02 12:26:44 0xC98 19821 TASKING Thread 3224 starting
2008-09-02 12:26:44 0x608 19821 TASKING Thread 1544 starting
2008-09-02 12:26:44 0x480 19821 TASKING Thread 1152 starting
2008-09-02 12:26:44 0x720 19821 TASKING Thread 1824 starting
2008-09-02 12:26:44 0x670 19821 TASKING Thread 1648 starting
2008-09-02 12:26:44 0x244 19821 TASKING Thread 580 starting
2008-09-02 12:26:44 0x314 19627 TASKING UKT started, TID:0x314
2008-09-02 12:26:44 0xA50 19627 TASKING UKT started, TID:0xA50
2008-09-02 12:26:44 0xE88 19627 TASKING UKT started, TID:0xE88
2008-09-02 12:26:44 0x5E8 19627 TASKING UKT started, TID:0x5E8
2008-09-02 12:26:44 0xA70 19627 TASKING UKT started, TID:0xA70
2008-09-02 12:26:44 0x2F4 19627 TASKING UKT started, TID:0x2F4
2008-09-02 12:26:44 0xE34 19627 TASKING UKT started, TID:0xE34
2008-09-02 12:26:44 0xE34 19615 VOLUMEIO Attaching volume 'knltrace'
2008-09-02 12:26:46 0x6C8 19613 DBSTATE I/O thread for 'knltrace' started
2008-09-02 12:26:46 0xE34 20040 Admin Kernel state: 'ADMIN' reached
2008-09-02 12:26:46 0xE34 9 SrvTasks Available Servertasks: 28
2008-09-02 12:26:46 0xE34 54003 dynpool HIST_DIR item size : 8
2008-09-02 12:26:46 0xE34 54003 dynpool HIST_DIR num items : 50
2008-09-02 12:26:46 0xE34 54003 dynpool DYNP_B930_HIST_DIR : 400
2008-09-02 12:26:46 0xE34 20083 Log Size of LocalRedoEntryBuffer/transactions: 57344
2008-09-02 12:26:46 0xE34 54003 dynDATA DYND_K57_KB_PAGES : 11
2008-09-02 12:26:46 0xE34 54003 dynDATA BACKUP RESTART REC (8K): 1
2008-09-02 12:26:46 0xE34 54003 dynpool BACKUP TASK LIST : 208
2008-09-02 12:26:46 0xE34 54003 dynpool BACKUP TAPE LIST : 672
2008-09-02 12:26:46 0xE34 54003 dynpool BACKUP DEVSP LIST : 96
2008-09-02 12:26:46 0xE34 54003 dynpool BACKUP VOL IDX LIST : 32
2008-09-02 12:26:46 0xE34 54003 dynpool BACKUP SRR QUEUE : 656
2008-09-02 12:26:46 0xE34 54003 dynpool DYNP_K38_SAVE_GLOB : 1568
2008-09-02 12:26:46 0xE34 54003 dynDATA DYND_K38_SAVE : 1729
2008-09-02 12:26:46 0xE34 54003 dynDATA BACKUP RESTART REC (8K): 1
2008-09-02 12:26:46 0xE34 54003 dynpool BACKUP TASK LIST : 32
2008-09-02 12:26:46 0xE34 54003 dynpool BACKUP TAPE LIST : 672
2008-09-02 12:26:46 0xE34 54003 dynpool BACKUP DEVSP LIST : 16
2008-09-02 12:26:46 0xE34 54003 dynpool BACKUP VOL IDX LIST : 32
2008-09-02 12:26:46 0xE34 54003 dynpool BACKUP SRR QUEUE : 128
2008-09-02 12:26:46 0xE34 54003 dynpool DYNP_K38_AUTOSAVE : 864
2008-09-02 12:26:46 0xE34 54003 dynDATA DYND_K38_AUTOSAVE : 321
2008-09-02 12:26:46 0xE34 19930 TASKING Kernel initialization completed
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 5
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:0
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 68
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:1
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 67
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:2
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 66
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:3
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 65
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:4
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 64
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:5
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 63
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:6
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 62
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:7
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 61
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:8
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 60
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:9
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 59
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:10
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 58
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:11
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 57
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:12
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 56
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:13
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 55
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:14
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 54
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:15
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 53
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:16
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 52
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:17
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 51
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:18
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 50
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:19
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 49
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:20
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 48
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:21
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 47
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:22
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 46
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:23
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 45
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:24
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 44
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:25
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 43
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:26
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 42
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:27
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 41
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:28
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 40
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:29
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 39
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:30
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 38
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:31
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 37
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:32
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 36
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:33
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 35
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:34
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 34
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:35
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 33
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:36
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 32
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:37
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 31
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:38
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 30
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:39
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 29
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:40
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 28
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:41
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 27
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:42
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 26
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:43
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 25
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:44
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 24
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:45
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 23
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:46
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 22
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:47
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 21
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:48
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 20
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:49
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 19
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:50
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 18
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:51
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 17
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:52
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 16
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:53
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 15
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:54
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 14
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:55
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 13
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:56
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 12
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:57
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 11
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:58
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 10
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:59
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 9
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:60
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 8
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:61
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 7
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:62
2008-09-02 12:26:46 0xE34 20018 Pager Start TaskId: 6
2008-09-02 12:26:46 0xE34 20019 Pager First DataCacheSegment:63
2008-09-02 12:26:47 0xE34 31 SrvTasks Permanently reserved 13 servertasks for 'Backup / Restore'.
2008-09-02 12:26:47 0xE34 31 SrvTasks Permanently reserved 2 servertasks for 'Backup / Restore'.
2008-09-02 12:26:47 0xE34 31 SrvTasks Permanently reserved 1 servertasks for 'Savepoint'.
2008-09-02 12:26:47 0xBE8 3 RunTime State changed from STARTING to ADMIN
2008-09-02 12:26:47 0xBE8 19601 DBSTATE SERVERDB is ready
============================================ begin of write cycle ==================
2008-09-02 12:26:48 0xE88 19633 CONNECT Connect req. (T69, Node:'', PID:2360)
2008-09-02 12:26:48 0xE88 19615 VOLUMEIO Attaching volume 'E:\sapdb\DFS\sapdata\disk001\DISKD0001'
2008-09-02 12:26:48 0x684 19613 DBSTATE I/O thread for 'E:\sapdb\DFS\sapdata\disk001\DISKD0001' started
2008-09-02 12:26:48 0xE88 19617 VOLUMEIO Single I/O attach, 'E:\sapdb\DFS\sapdata\disk001\DISKD0001', UKT:7
2008-09-02 12:26:48 0xE88 19615 VOLUMEIO Attaching volume 'E:\sapdb\DFS\sapdata\disk002\DISKD0002'
2008-09-02 12:26:48 0xCAC 19613 DBSTATE I/O thread for 'E:\sapdb\DFS\sapdata\disk002\DISKD0002' started
2008-09-02 12:26:48 0xE88 19617 VOLUMEIO Single I/O attach, 'E:\sapdb\DFS\sapdata\disk002\DISKD0002', UKT:7
2008-09-02 12:26:48 0xE88 19615 VOLUMEIO Attaching volume 'E:\sapdb\DFS\sapdata\disk003\DISKD0003'
2008-09-02 12:26:48 0xAC0 19613 DBSTATE I/O thread for 'E:\sapdb\DFS\sapdata\disk003\DISKD0003' started
2008-09-02 12:26:48 0xE88 19617 VOLUMEIO Single I/O attach, 'E:\sapdb\DFS\sapdata\disk003\DISKD0003', UKT:7
2008-09-02 12:26:48 0xE88 19615 VOLUMEIO Attaching volume 'E:\sapdb\DFS\saplog\log01\DISKL001'
2008-09-02 12:26:48 0x634 19613 DBSTATE I/O thread for 'E:\sapdb\DFS\saplog\log01\DISKL001' started
2008-09-02 12:26:49 0xE88 19617 VOLUMEIO Single I/O attach, 'E:\sapdb\DFS\saplog\log01\DISKL001', UKT:7
2008-09-02 12:26:49 0xE88 19615 VOLUMEIO Attaching volume 'D:\sapdb\DFS\saplog\m_log01\M_DISKL001'
2008-09-02 12:26:49 0x678 19613 DBSTATE I/O thread for 'D:\sapdb\DFS\saplog\m_log01\M_DISKL001' started
2008-09-02 12:26:49 0xE88 19617 VOLUMEIO Single I/O attach, 'D:\sapdb\DFS\saplog\m_log01\M_DISKL001', UKT:7
2008-09-02 12:26:49 0xE88 19615 VOLUMEIO Attaching volume 'E:\sapdb\DFS\saplog\log02\DISKL002'
2008-09-02 12:26:49 0x5B0 19613 DBSTATE I/O thread for 'E:\sapdb\DFS\saplog\log02\DISKL002' started
2008-09-02 12:26:49 0xE88 19617 VOLUMEIO Single I/O attach, 'E:\sapdb\DFS\saplog\log02\DISKL002', UKT:7
2008-09-02 12:26:49 0xE88 19615 VOLUMEIO Attaching volume 'D:\sapdb\DFS\saplog\m_log02\M_DISKL002'
2008-09-02 12:26:49 0xB08 19613 DBSTATE I/O thread for 'D:\sapdb\DFS\saplog\m_log02\M_DISKL002' started
2008-09-02 12:26:49 0xE88 19617 VOLUMEIO Single I/O attach, 'D:\sapdb\DFS\saplog\m_log02\M_DISKL002', UKT:7
2008-09-02 12:26:49 0xE88 20016 Pager Start Read Converter
2008-09-02 12:27:06 0xE34 20003 KernelDB 70 percent of data area occupied, 3455999 pages free
2008-09-02 12:27:07 0xE88 20017 Pager Stop Read Converter, Pages: 4528 IO: 4528
2008-09-02 12:27:07 0xE88 53000 DATACACH Begin data cache restart
2008-09-02 12:27:07 0xE88 54003 dynpool DATA_CACHE_REGIONS : 64
2008-09-02 12:27:07 0xE88 54003 dynpool B20_DATACACHE_HEAD : 85112
2008-09-02 12:27:07 0xE88 54003 dynpool DATACACHE head num item: 10639
2008-09-02 12:27:07 0xE88 54003 dynpool DATACACHE head item siz: 8
2008-09-02 12:27:07 0xE88 54003 dynpool DATACACHE task queue : 2144
2008-09-02 12:27:07 0xE88 54003 dynpool US + SV + DW + 8 : 134
2008-09-02 12:27:07 0xE88 54003 dynpool DATACACHE taskq elem : 16
2008-09-02 12:27:07 0xE88 54003 dynpool B20_DATACACHE_TASKQ : 87256
2008-09-02 12:27:07 0xE88 54003 dynDATA DATA_CACHE_PAGES : 2658
2008-09-02 12:27:07 0xE88 54003 dynpool B20_DATACACHE_CB : 223272
2008-09-02 12:27:07 0xE88 54003 dynpool DATACACHE num cblocks : 2658
2008-09-02 12:27:07 0xE88 54003 dynpool DATACACHE cblock size : 84
2008-09-02 12:27:07 0xE88 54003 dynpool DYNP_B20_DATACACHE : 19873792
2008-09-02 12:27:07 0xE88 54003 dynDATA DYND_B20_DATACACHE : 170112
2008-09-02 12:27:07 0xE88 53000 DATACACH Finish data cache restart
2008-09-02 12:27:07 0xE88 53000 B*TREE LOB file directory restart successful
2008-09-02 12:27:07 0xE88 7 FileDir File directory restarting
2008-09-02 12:27:18 0xE88 8 FileDir File directory restart completed
2008-09-02 12:27:19 0xE88 20061 Log History: 50 (50) files existing
2008-09-02 12:27:19 0xE88 20064 Log History: all history files registered, GC is ready
2008-09-02 12:27:19 0xE88 54003 dynpool DYNP_K51_LOCK_LIST : 66843632
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK maxlocks : 300000
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK items : 902400
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK Regions : 24
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK TransRegions : 8
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK RegionGlob+Space : 3072
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK TransGlob : 640
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK SupplyItemsPerRgn : 100
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK SupplySize : 172800
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK RowHash entries : 300000
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK TabHash entries : 60000
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK Row+Tab hash size :1440000
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK Trans entries : 408
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK trans_list size : 78336
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK TransPtrList : 1632
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK TransHash entries : 408
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK TransHash size : 1664
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK SupplyPoolSegments: 9000
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK SupplyPoolSize : 64980000
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK ObjColl_list size : 13056
2008-09-02 12:27:19 0xE88 54003 dynpool LOCK ObjReq_list size : 8160
2008-09-02 12:27:19 0xE88 20006 Log 1 queues, flushmode is 'MaximizeSafety', devstate is 'Okay'
2008-09-02 12:27:19 0xE88 20007 Log Oldest not saved is ioseq 5105560 @ off 85273
2008-09-02 12:27:19 0xE88 20008 Log First known on LogVolume is ioseq 2750300 @ off 108504
2008-09-02 12:27:19 0xE88 20005 Log Restart from ioseq 5233533 @ off 108112 to ioseq 5236323 @ off 108503
2008-09-02 12:27:19 0xE88 20010 Log Result after checking the log device: 'Ok'
2008-09-02 12:27:19 0xE88 9 Log The number of active logging-queues has been increased to 1
2008-09-02 12:27:19 0xE88 53000 OBJECT Restarted Garbage coll: 0
2008-09-02 12:27:19 0xE88 11 Rst 408 redo transactions readable and 11 redo tasks available.
2008-09-02 12:27:19 0xA50 7 Restart recovering log from log_volume from IOSeq: '5233533'
2008-09-02 12:27:21 0xA50 ERR 18793 EXCEPT EXCEPTION:'Access violation' (0xc0000005), The program code at IP:0x5afde9 attempted to read to/from address:0x18
2008-09-02 12:27:22 0xA50 19624 EXCEPT Kernel aborts
2008-09-02 12:27:22 0x880 ERR 19999 BTRACE Using 'imagehlp.dll' verHi, Lars.
Thank you.
Ok, I just try your variant after the recovery will finished (I start recovery with initialization this morning).
Before it I tried to recovery with initialization. Full recovery finished successfull, Database Manager sugest me to restart database or continie log recovery, first log recovery falled with error and stop:
2008-09-08 09:42:59 0xB6C ERR 52012 RESTORE error occured, basis_err 400
2008-09-08 09:42:59 0xB6C ERR 3 Admin Database state: OFFLINE
2008-09-08 09:42:59 0xB6C ERR 6 KernelCo + Internal errorcode, Error code 400 "cancelled"
2008-09-08 09:42:59 0xB6C ERR 20000 Log + no update of LogInfoPage: DeviceState = Cleared, LogIsEmpty = true
2008-09-08 09:42:59 0xB6C ERR 6 KernelCo + k38headmaster, Error code 400 "cancelled"
2008-09-08 09:42:59 0x308 ERR 7 Messages Begin of dump of registered messages
2008-09-08 09:42:59 0x308 ERR 10 Messages abort dump of registered messages
2008-09-08 09:42:59 0x308 ERR 8 Messages End of the message list registry dump
2008-09-08 09:43:03 ___ Stopping GMT 2008-09-08 05:43:03 7.6.04 Build 016-123-191-583
Then I tried to restart database as Database Manager sugest. Next error:
2008-09-08 10:00:25 --- Starting GMT 2008-09-08 06:00:25 7.6.04 Build 016-123-191-583
2008-09-08 10:00:40 0x3D4 ERR 51080 SYSERROR -9407 unexpected error
2008-09-08 10:00:40 0x3D4 ERR 3 Admin Database state: OFFLINE
2008-09-08 10:00:40 0x3D4 ERR 20002 Log + Expected ioseq 632114, found NIL-NIL on off 511952
2008-09-08 10:00:40 0x3D4 ERR 20023 Log + Savepoint not found on log
2008-09-08 10:00:40 0x3D4 ERR 20028 Admin + Initialization of log for 'restart' failed with 'SavepointPositionNotFound'
2008-09-08 10:00:40 0x684 ERR 7 Messages Begin of dump of registered messages
2008-09-08 10:00:40 0x684 ERR 8 Messages End of the message list registry dump
2008-09-08 10:00:46 ___ Stopping GMT 2008-09-08 06:00:46 7.6.04 Build 016-123-191-58
Now I recover one more time and try to restart database without log recovery.
Can I do it via database manager (put "Online")? Or via your command "dbmcli -d <dbsid> -u control,<pw> util_execute clear log"? And how I can perform recover of logs without error?
Best regards, Elena -
Dreamweaver CS5 doesn't start, cannot find configuration file
Dreamweaver Could not locate the Resource file in the Configuration folder. This file is required to run Dreamweaver. Please reinstall the application.
Dreamweaver CS5 doesn't start due to the error message above.
Found the configuration folder but on my roaming profile on the server, not on C drive.
Note that I installed Dreamweaver on the second partition of the hard disk, not on C drive due to lack of space. Other Adobe CS5 software are running well such as Photoshop and InDesign.
I have tried to delete (after backup) the Configuration folder, as I read on this forum that it should be automatically recreated, but no success. Tried to copy the Configuration folder (in fact the entire Adobe folder) to the user profile on C drive, but no success.
On this PC, no previous version of Dreamweaver has been installed. However, I have used older versions on different computers, and there are in the Adobe folder on my roaming profile traces of CS4 and CS6.
Could you please advise?Not sure which thread you have read on this forum but I suggest read this official document and then see if resolves any lingering problems.
<http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html>
Good luck. -
VMWare doesn't start after kernel update
Hello,
I've just updated my kernel to 3.10.0-997-generic. After that VMWare Player doesn't start anymore.
I've tried to run patches and different solutions I found in google, but it didn't worked yet.
This is the log of my last attempt.
Thanks in advance
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Log for VMware Workstation pid=14806 version=9.0.2 build=build-1031769 option=Release
2013-06-14T21:42:29.306-03:00| vthread-3| I120: The process is 64-bit.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Host is Linux 3.10.0-997-generic Ubuntu 12.10
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/preferences": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Failed to load user preferences.
2013-06-14T21:42:29.306-03:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-14806.log
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmmon module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmnet module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmblock module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmci module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vsock module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Setting vsock to depend on vmci.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Created new pathsHash.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Invoking modinfo on "vmmon".
2013-06-14T21:42:29.320-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-14T21:42:29.320-03:00| vthread-3| I120: Invoking modinfo on "vmnet".
2013-06-14T21:42:29.322-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.322-03:00| vthread-3| I120: Invoking modinfo on "vmblock".
2013-06-14T21:42:29.324-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.324-03:00| vthread-3| I120: Invoking modinfo on "vmci".
2013-06-14T21:42:29.326-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.326-03:00| vthread-3| I120: Invoking modinfo on "vsock".
2013-06-14T21:42:29.328-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Obtaining info using the running kernel.
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Setting header path for 3.10.0-997-generic to "/lib/modules/3.10.0-997-generic/build/include".
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.351-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.351-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Kernel header path retrieved from FileEntry: /lib/modules/3.10.0-997-generic/build/include
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Update kernel header path to /lib/modules/3.10.0-997-generic/build/include
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.523-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.523-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.524-03:00| vthread-3| I120: Found compiler at "/usr/bin/gcc"
2013-06-14T21:42:29.526-03:00| vthread-3| I120: Got gcc version "4.7".
2013-06-14T21:42:29.526-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.526-03:00| vthread-3| I120: Using user supplied compiler "/usr/bin/gcc".
2013-06-14T21:42:29.528-03:00| vthread-3| I120: Got gcc version "4.7".
2013-06-14T21:42:29.528-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.532-03:00| vthread-3| I120: Trying to find a suitable PBM set for kernel "3.10.0-997-generic".
2013-06-14T21:42:29.532-03:00| vthread-3| I120: No matching PBM set was found for kernel "3.10.0-997-generic".
2013-06-14T21:42:29.532-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.538-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.538-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.538-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.539-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.545-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.545-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.545-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.545-03:00| vthread-3| I120: Using temp dir "/tmp".
2013-06-14T21:42:29.547-03:00| vthread-3| I120: Invoking modinfo on "vmnet".
2013-06-14T21:42:29.548-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.548-03:00| vthread-3| I120: Invoking modinfo on "vmblock".
2013-06-14T21:42:29.550-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.550-03:00| vthread-3| I120: Invoking modinfo on "vmci".
2013-06-14T21:42:29.552-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:30.327-03:00| vthread-3| I120: Setting destination path for vmnet to "/lib/modules/3.10.0-997-generic/misc/vmnet.ko".
2013-06-14T21:42:30.327-03:00| vthread-3| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2013-06-14T21:42:30.332-03:00| vthread-3| I120: Successfully extracted the vmnet source.
2013-06-14T21:42:30.332-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmnet-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:31.977-03:00| vthread-3| W110: Failed to build vmnet. Failed to execute the build command.
2013-06-14T21:42:31.979-03:00| vthread-3| I120: Setting destination path for vmblock to "/lib/modules/3.10.0-997-generic/misc/vmblock.ko".
2013-06-14T21:42:31.979-03:00| vthread-3| I120: Extracting the vmblock source from "/usr/lib/vmware/modules/source/vmblock.tar".
2013-06-14T21:42:31.990-03:00| vthread-3| I120: Successfully extracted the vmblock source.
2013-06-14T21:42:31.990-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmblock-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:33.429-03:00| vthread-3| W110: Failed to build vmblock. Failed to execute the build command.
2013-06-14T21:42:33.431-03:00| vthread-3| I120: Setting destination path for vmci to "/lib/modules/3.10.0-997-generic/misc/vmci.ko".
2013-06-14T21:42:33.431-03:00| vthread-3| I120: Extracting the vmci source from "/usr/lib/vmware/modules/source/vmci.tar".
2013-06-14T21:42:33.445-03:00| vthread-3| I120: Successfully extracted the vmci source.
2013-06-14T21:42:33.446-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmci-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:35.773-03:00| vthread-3| I120: Successfully built vmci. Module is currently at "/tmp/modconfig-YkpUyf/vmci.o".
2013-06-14T21:42:35.773-03:00| vthread-3| I120: Found the vmci symvers file at "/tmp/modconfig-YkpUyf/vmci-only/Module.symvers".
2013-06-14T21:42:35.774-03:00| vthread-3| I120: Installing vmci from /tmp/modconfig-YkpUyf/vmci.o to /lib/modules/3.10.0-997-generic/misc/vmci.ko.
2013-06-14T21:42:35.774-03:00| vthread-3| I120: Registering file "/lib/modules/3.10.0-997-generic/misc/vmci.ko".
2013-06-14T21:42:36.234-03:00| vthread-3| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2013-06-14T21:42:36.234-03:00| vthread-3| I120: Registering file "/usr/lib/vmware/symvers/vmci-3.10.0-997-generic".
2013-06-14T21:42:36.686-03:00| vthread-3| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.Before
create file "/usr/lib/vmware/settings"
after
create file "/root/.vmware/config"
after
create file "/root/.vmware/preferences"
And after
Install the build-essential package:
sudo apt-get install build-essential
VMware Workstation 11.1.0 and Player (Pro) 7.1.0 support kernels up to 3.18. You can apply a patch:
curl http://pastie.org/pastes/9934018/download -o /tmp/vmnet-3.19.patch
cd /usr/lib/vmware/modules/source
tar -xf vmnet.tar
patch -p0 -i /tmp/vmnet-3.19.patch
tar -cf vmnet.tar vmnet-only
rm -r *-only
vmware-modconfig --console --install-all
I tried, worked -
Help: Pointbase db doesn't start when launching SP4 portal
Hi,
I downloaded WL platform SP4 today and installed (before the installation I uninstalled SP2)in my laptop. When I launch the examples portal, the pointbase db doesn't start. I tried both SP2 and SP3 in my laptop and both worked. The error messages below are directly copied from the console. My understanding is the portal server startup will automatically start pointbase db (I didn't do any configuration yet). Anybody know the problem and solution?
My laptop config:
Win XP, SP2, 1.6 GHz, 1GB memory
I am the admin user.
Thanks a lot!!
Error messages from the launching console:
<Jul 6, 2005 6:00:54 PM PDT> <Warning> <JDBC> <BEA-001129> <Received exception w
hile creating connection for pool "cgPool": SQL-server rejected establishment of
SQL-connection. Pointbase Server may not be running on localhost at port 9093.>
<Jul 6, 2005 6:01:28 PM PDT> <Warning> <JDBC> <BEA-001129> <Received exception w
hile creating connection for pool "portalPool": SQL-server rejected establishmen
t of SQL-connection. Pointbase Server may not be running on localhost at port 90
93.>
<Jul 6, 2005 6:01:34 PM PDT> <Alert> <JMS> <BEA-040052> <JMSServer "cgJMSServer"
store failed to open java.io.IOException: JMS JDBC store, connection pool = <cg
JMSPool-nonXA>, prefix = <weblogic>: connection pool does not exist.
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix
= <weblogic>: connection pool does not exist
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:48
8)
at weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
60)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
28)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(Rem
oteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBean
ServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanPro
xy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(
ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployment
s(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
>The exception doesn't tell me much more than the DB connection / pool couldn't connect to the db.
Sometimes solving these types of problems where it should work, this works everywhere else, so what could be wrong here... Let me suggest that you install a new domain using a new root directory. IE c:\bea814 and not reuse c:\bea.
I'm guessing that an essential script or property file was not overwritten by the 814 install.
JBTW, 814 pointbase is a new version and is run on a new port from prior 8.x versions, the new port is 9093, where prior versions was 9092.
A diag. is after you start via, startWebLogic.cmd, to open a DOS window and run this command:
netstat -an
Look for a LISTEN on port 9093
This would confirm that 814's pointbase is started and there's a configuration issue with the connection pools.
Good luck, curt -
[Solved] Starting systemd --user as a systemd --system process?
Hey guys,
I would like to run systemd --user as a system service using this .service file I wrote:
$ cat [email protected]
[Unit]
Description=Systemd --user instance for %I
Documentation=man:systemd
[Service]
User=%I
ExecStart=/usr/lib/systemd/systemd --user --log-level=debug
[Install]
WantedBy=multi-user.target
I enabled it for my user using `systemctl enable systemd-user@evan`, however, when starting it it fails with the following errors:
Jul 21 21:14:42 desktop systemd[12920]: systemd 204 running in user mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Jul 21 21:14:42 desktop systemd[12920]: Using cgroup controller name=systemd. File system hierarchy is at /sys/fs/cgroup/systemd/system/[email protected]/[email protected]/systemd-12920.
Jul 21 21:14:42 desktop systemd[12920]: Failed to create root cgroup hierarchy: Permission denied
Jul 21 21:14:42 desktop systemd[12920]: Failed to allocate manager object: Permission denied
Is it possible to run systemd --user like this? Do I need to add something to my [email protected]?
Last edited by EvanPurkhiser (2013-07-22 02:10:10)EDIT: I just realized that the systemd-user-session-units package will only include specific units at build-time weather I have have the programs or not. You're right, I should just use this package!
Well, to be honest, maybe I'm trying to hack around a problem that doesn't even really exist, but I don't think the systemd-user-sessions-units package meets my needs.
The way I would like to have my user sessions setup is something like this:
I would like to have an instance of systemd --user always running under my user so I can keep things like transmission-daemon always running, even when I don't have a user session open. When I do start my user session (via logging into getty) I want to bring my systemd instance up to a certain target. For example, logging in via tty1 should bring up graphical.target, which will start X11 and all that, while logging into any other tty will start console.target (for stuff like ssh-agent etc).
Thinking more about this I suppose there's really no reason I couldn't use the [email protected] from systemd-user-session-units, but since I won't use most of the other user units included, I would rather just not use it.
Here's what my .profile looks like:
if systemctl -q is-active systemd-user@evan
then
# Default systemd to the console target
target="console"
# If we're logging in from VT1 start the graphical target
if [[ $XDG_VTNR == 1 ]] && ! systemctl --user -q is-active graphical.target &> /dev/null
then
export DISPLAY=:0
target="graphical"
fi
# Set all environment variables in the systemd --user instance (still working on this)
env | systemctl --user set-environment -
# Bring up systemd --user to the specified target
systemctl --user start ${target}.target
fi
source "$HOME/.bashrc"
Last edited by EvanPurkhiser (2013-07-22 03:56:13) -
Flash CC doesn't start up after last update
Flash CC doesn't start up after last update. It said "Training en zelfstudie" (Training and self-stufy in Dutch) for the update.
Everything was working fine before the update, now if I try to start-up Flash solo,
it says: "Flash werkt niet meer" (Flash has stopped working), and quits.
As you can probably tell from the message, I'm on Windows 7.
Now here is interesting info: if I double click a previous movie, then Flash starts up fine and loads the previous movie.
However when I close it and the screen that should appear is the "new movie" dialog, flash hangs again.
So obviously something went wrong installing the new update, or the update doesn't work properly.
I'm now working with my pre-cc flash5.5 version, which I re-installed to avoid crashing flash every time I close a file.
My questions:
1- Where do I log this problem? (Or am I in the right place?)
2- Can I re-install the previous version, which worked fine? (I can live without tutorials etc.)
3- Can I try to re-install this version if the above is not possible and how do I go about doing that?What fixed the problem for me was just reinstalling Flash CC. I thought I'd give it a try, because I couldn't find a message of anyone experiencing the same problem.
So I used the control panel to uninstall Flash, then I tried reinstalling.
Creative Cloud kept saying Flash is up to date, so you can't reinstall. If you click on the gear and choose Exit and then restart Creative Cloud it will take a few seconds, but the it will see the situation as it is and you can reinstall Flash.
After the reinstall the issue was gone.
Thanks for the other solutions, I think this is a handy resource for rolling back Flash if I ever do need it
and gives me more confidence in the creative cloud product.
Maybe Adobe will pick it up and make it easier for us 'normal' creative-cloud users to
pick which version we want. Like you can do in CVS systems. -
Db instance doesn't start automatically
Hello,
I have a problem with a db instance that doesn't start automatically when the system restarts. I have searched in the forum, and I have found similar questions, but their answers don't fix my problem.
I have Windows Server 2003 and Oracle10g. More information:
Services:
OracleOraDb10g_home1TNSListener service is started (and its startup type is automatic)
OracleServiceLAB service is started (and its startup type is automatic)
Registries in Windows:
ORA_LAB_AUTOSTART=true
ORA_LAB_SHUTDOWN=true
ORACLE_SID=LAB
System variable:
oracle_sid=LAB
When the system restarts, the services are started but the instance is down I get "ORA-01034: oracle not available". In the oradim.log file I see this error: ORA-12560: TNS protocol adapter error occurred.
I suppose that it can be a problem with the connection service name, but I don't know which one and why, because I have defined the oracle_sid system variable (it's true that without it the problem was the same).
Can anybody help me? Thanks in advance.
Best regards,
Arantzaok , it seems there are some notes on metalink about diagnosing this error.
ORA-01034: oracle not available".
see below:
Oracle indicates the following possible causes:
The SGA requires more space than was allocated for it. Can you check how much SGA you have and memory
The operating system variable pointing to the instance is improperly defined.
And ORACLE recommends the following remedial action: Refer to accompanying messages for possible causes and correct the problem mentioned in the other messages. Retry after ORACLE has been initialised. If ORACLE has been initialised, verify that ORACLE was linked correctly. Also, refer to the installation or user's guide for additional information about this error.
After exhausting all other options, a simple reboot has been observed to resolve this error.
Regards -
Bridge doesn't Start, Bridge mini is running (PS6)MacPro, i7, OSX 10.7.4
Horst Koch,
Community Member
23.05.2012 13:29
Bridge stürzt immer ab, bzw. startet erst gar nicht, Bridge Mini unter PS 6 läuft
MacPro, i7, OSX 10.7.4 (Neueinrichtung)
Adobe reader 10.1 läßt sich nicht starten
meldung "interner fehler ist aufgetrten"
Update PS 6 läßt sich nicht installieren
möchte Zugriff auf eine nicht vorhandne Library/User DateiHave you tried resetting preferences by holding down Option key and starting Bridge? Should get reset window with 3 options. Choose all 3.
Maybe you are looking for
-
Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for futur
-
The entire image is what is blinking, while the photoshop tools remain on.
-
Running 10.6.8 and replace my wireless mouse with a Microsoft 5000 Bluetooth. It works fine and then all of the suddon the left, right and wheel will not work. I replace with my usb apple mouse and it does the same. I also tried my old apple wirel
-
Lots ligtning power supply cord, where can I get charge/replacement?
Oh great, I just got in my new iPhone and the power supply cord has gone walk about ! No big deal right? Wrong. Nobody has power cords in stock. Even the local Apple store is out. I placed an order for 3 of the powercords on the Apple store, but de
-
Listener Adapters in BPEL and ESB
I created 3 BPEL Processes and 3 ESB's listening to OA Adapters. All of them listen to the same event. I found from the UI that only one subscription is created for all the 8 listener OA Adapters. When the event is raised all my BPEL Processes are in