Librfc32.dll exception for ECC 6.0
Hi,
My customer just upgraded from SAP R/3 4 to ECC 6.0. All the RFC calls now raise an exception in the librfc32.dll.
Here is the error from the event viewer:
Faulting application consoleapplication1.vshost.exe, version 8.0.50727.42, faulting module librfc32.dll, version 7100.0.0.5288, fault address 0x00001c01.
Is there a braking change in ECC 6.0 RFC protocol? Do I need a new librfc32 dll file? Everything is working from SAP GUI v7.10 and I think that application is using librfc32.dll.
Any help is much appreciated.
Best Regards
Torkel Ödgaard
Dear Poornima,
As per my experience,better to go for above 160GB hard drive(250GB will be
good) and 2 GB RAM is required for Laptop's.
All the best.
Regards
Mangal
Similar Messages
-
Missing LIBRFC32.DLL file for 64bit - x64 Windows Server
Dear Folks,
I have installed SAP ECC6 with BI7 system on Windows Server 2003 on x64. But I am not able to get data from SAP BW from Crystal Report 2008. I also did MDX PARSER connection test through t.code SM59. I got list of error messages.
Logon Cancel
Error Details timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host ns2 / sapgw00
Error Details DETAIL: no connect of TP mdxsvr from host ns2 after 20 sec
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 798
Error Details MODULE: gwr3cpic.c
Error Details LINE: 5873
Error Details RETURN CODE: 242
Error Details VERSION: 2
I have been read other forums, most probably I am missing LIBRFC32.DLL file for x64 Windows Server. I couldnu2019t find any where this specific file for Windows Server x64 64bit version. It is available on Sap Market place, since I donu2019t have super user rights, I canu2019t download it.
If any one of you already have this file. Please share with me.
thanks
ObaidHello Ingo
Thanks to read my problem and for your reply, I have already read that SAP Note 1032461, I have the same problem as clearly defined in the note, and suggesting to put LIBRFC32.DLL file in <windows-dir>/system32 folder.
My SAP ECC and BI7 (Kernl 7.00) is installed on 64-bit, x64 Windows Server 2003 Enterprise. I need to download that file from RFC library available on SAP Market place. But, I don't have any super user rights.
If someone has similar setup and has already that file or could download for me. I need to get that file. I appreciated your kindly help.
thanks
Obaid -
Unable to load DLL 'librfc32.dll' (Exception from HRESULT: 0x8007007E)
Unable to load DLL 'librfc32.dll' (Exception from HRESULT: 0x8007007E)
Hi!
We would like to hold the account balance data from EMPTOR to SAP and have the following error:
Unable to load DLL 'librfc32.dll' (Exception from HRESULT: 0x8007007E)
We use SAP ERP 2005 on Windows 64 Bit.
Can some one help with the problem?
Thank you very much!
regards
ThomYou can download the latest avaiable kernel or just the librrfc component from http://service.sap.com/swdc. They maybe an issue with this DLL. Just download the latest one and copy into \usr\sap\<SID>\SYS\exe\run directory. Be sure to save the previous DLL.
Thanks
Adil -
Microsoft Visual Studio - Unable to load DLL 'librfc32.dll'
Hi,
I'm experiencing the following problem:
When trying to establish a connection between SAP BPC MS and our SAP NW BW system.
I've created a new Integration Services project in Business Intelligence Development Studio. The issue comes up when I try to test the connection:
TITLE: Microsoft Visual Studio
Unable to load DLL 'librfc32.dll':
This application has failed to start because the application configuration is incorrect.
Reinstalling the application may fix this problem. (Exception from HRESULT: 0x800736B1)
I've placed the librfc32.dll library file on C:\WINDOWS\system32\.
I ran R3DLLINS.EXE according to Note 684106 - Microsoft runtime DLLs.
This placed all the needed dll library files (msvcr71.dll, msvcp71.dll, mfc71.dll, mfc71u.dll) on the correct path (C:\WINDOWS\system32\).
I keep getting the same error.
Platform:
Windows 2003 R2 SP2 32-Bit
MS SQL Server 2008 SP1
SAP BPC 7.0 Microsoft Platform
I've checked out some other posts on SDN but it didn't solve my problem:
Re: librfc32.dll not found on Windows Server 2003
LIBRFC32.DLL not Found Error
Re: librfc32.dll
Any ideas?
Thank you.
Bruno Pereira
Edited by: Bruno Pereira on Mar 23, 2010 5:34 PM
Edited by: Bruno Pereira on Mar 23, 2010 5:36 PMI was able to work it out.
For your reference:
Issue arrises from the fact that Business Intelligence Development Studio isn't able to load the librfc32.dll without the [Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update |http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-40ff-b072-9112bab119c2&displaylang=en#filelist]implemented on the system.
Reference SAP note:
[Note 684106 - Microsoft runtime DLLs|https://service.sap.com/sap/support/notes/684106]
Bye!
Bruno Pereira -
What are the required/recommended Antivirus exceptions for BPC ????
I need to provide and implement a definitive list of required Antivirus exceptions for BPC (both Web and SQL servers). We currently run v5.1 but I would also like to know if anything is different for v7, although I don't see why it would be.
However, I only seem to have vague references to exception lists (e.g. BPC Log Files or SQL database files)
So I find myself wondering what the rest of the BPC community do in this resepct ???
If you could let me know what exceptions are generally made (or even better, if you have an actual list of recommended exceptions), I would be extremely grateful.
Thanks
CraigDo not real-time scan SAP BPC server program directories.
Do not real-time scan SQL Server and Analysis Services server
program directories.
Do not real-time scan the SQL Server and Analysis Services data
directories.
Do not real-time scan log files, temp folders and backup
directories.
Monitoring of network traffic should be specific to file type where
possible
Ensure the SAP BPC XLA and DLL files are not scanned real-time
(these files are located in the BPC program files directory)
The OutlookSoft folder within the My Documents folder that stores
application and personal files can be scanned but is likely to
impact the performance of dimension downloads and the retrieval
of documents from these directories (wizards, process selector
menus, etc).
Regards
Sorin Radulescu -
Download EhP4 packages for ECC 6.0 including EhP1 for NW 7.0
Hi experts,
I have the following problem. I must update an existing ECC 6.0 system to NW EhP1. I found it is not possible to update only the NetWeaver but the whole ERP 6.0 must be updated to EhP4. The system is registered in Sol. Man. as ECC with no usage types. The MOPZ does not give me the option to download EhP packages neither it shows in the list of SP the latest SPs for ECC 6.0 EhP4/NW 7.0 EhP1. All the upgrade guides state that only MOPZ in Sol. Man. should be used for download because of the delta upgrades and the generated XML file.
Is there any other way to download the EhP4 packages and to upgrade the system except MOPZ and EHPI?
Thanks!
PitIf you have 32 bit system, you can use SAINT to apply EHP4, but you will need XML file from MOPZ anyway. I would suggest you to register your system in SOLMAN SMSY as ERP 6.0 system.
Please check also:
https://service.sap.com/erp-ehp
and [THIS DOCUMENT|http://service.sap.com/~sapidb/011000358700000293582009E.PDF] will tell you more including setup in SOLMAN.
You will find all information there. -
How critical is it to use the librfc32.dll version (file version 4640,5,123,2956) referred to in the OWB 9.2 User Guide? I can't find this exact version and I have no errors when creating a SAP source module. However, when I try to import tables from SAP by browsing Business Component, the loading progress dialog disappears after 1 second and a blank SAPR/3 Business Component Hierarchy view opens.
Even if I remove the librfc32.dll file from the OWB_HOME\owb\bin\admin location on my client, the above still applies. Should this file be placed somewhere else to make a connection to SAP?We are using OWB 9.2.0.2.8 There are many versions of librfc32.dll. Where can I find the exact version mentioned in the user guide, if this is critical?
The user guide says this dll should be placed in OWB_HOME/bin/admin. On my installation I have either OWB_HOME/bin with no /admin sub-directory, or I have OWB_HOME/owb/bin/admin. I assume the latter directory location is the correct location for the dll (or do I need to create a new admin sub-directory under OWB_HOME/bin?). -
Dear Experts,
As per note 1032461 i downloaded and copied the file, But RFC is still showing error. While executed the command "find "LIBRFC" librfc32.dll" and getting the below error.
As above said in Note:1447900, i cannot find the below files from support portal.
Solution
Apply the librfc 7.20 patches level 11 for Windows platforms:
librfc32.dll 7.20 with file version 7200.1.73.6735 or higher
librfc32u.dll 7.20 with file version 7200.1.73.6735 or higherBrandon,
My OS is X64 Unicode, i downloaded and copied the below file and it is the latest.
As per Note:1447900, I needed the:
librfc32.dll 7.20 with file version 7200.1.73.6735 or higher
librfc32u.dll 7.20 with file version 7200.1.73.6735 or higher -
Librfc32.dll on 2008 R2 64 Bit / IIS crash
We are currently migrating from Windows Server 2003 32 Bit to 2008 R2 64 Bit(using ERPConnect 4.1. / running IIS 7).
On 2003 32 Bit every RFC-Call is working fine. But calling SAP under 2008 64 Bit ends in IIS AppCrash.
The crash possibly caused by an unhandled ABAP exception. This happen randomly.
Changing the Application to 32 Bit has no effect. Trying several versions of librfc32.dll has no effect.
Any hints to solve this problem?I'm experiencing exactly the same problem. Tried re-installing and re-imaging the box several times. This is the first time I'm running into this issue as I have performed several installs on other Windows 2008 R2 servers with no issues.
Does anyone have any idea? I opened SR with Oracle, they suggested that this is a bug (This is due to a known issue with older versions of OCM -unpublished bug 9800347 [http://bug.oraclecorp.com/pls/bug/webbug_edit.edit_info_top?rptno=9800347] . This was fixed in 10.3.4 and backported to 10.3.3.1.1; apparently an older version (10.3.3.1) which is bundled in this kit as this OCM 10.3.3.1).
I'm not buying this explanation as it does not explain why this is happening and why few other times in the past with same system and same version install it worked perfectly fine. -
Typed model execution failed; see nested exception for details
Hi All,
I have created a WebDynpro Java Application which is accessing a Bapi.
The application is compiled and deployed .
When i try to execute the application by entering data on the search view and clicking the get Button ,
I am getting the below exception message at the botton of the Page .
For the same data when i execute the Bapi in ECC ,it is working fine .
Now my Query is .
1) Do i need to do some additional configuration apart from JCO and destinations in NWA ?
2) From where to get the exception file "see nested exception for details" ?
3) Is this a known issue as NWDS 7.31 works on RFC2 .
Regards,
NiteshHi,
This is the error generated in default trace after executing the application.
#2.0 #2015 01 28 11:12:46:842#+0530#Error#com.sap.engine.services.security.authentication.loginmodule.ticket#
#BC-JAS-SEC#security#C000AC181DC000420000000600E80006#1523450000000004#demo.sap.com/test1#com.sap.engine.services.security.authentication.loginmodule.ticket#Guest#0##6AA3FA37A6B011E49E33000000173EFA#71a67b43a6b011e4bb7f000000173efa#71a67b43a6b011e4bb7f000000173efa#0#Thread[HTTP Worker [@733688529],5,Dedicated_Application_Thread]#Plain##
Error while creating assertion ticket on demand. No logged in user found.#
#2.0 #2015 01 28 11:12:46:842#+0530#Error#com.sap.security.core.server.destinations.lib.AssertionTicketRetriever$GetAssertionTicketPrivAction#
#BC-JAS-SEC#security.class#C000AC181DC000420000000700E80006#1523450000000004#demo.sap.com/test1#com.sap.security.core.server.destinations.lib.AssertionTicketRetriever$GetAssertionTicketPrivAction.run()#Guest#0##6AA3FA37A6B011E49E33000000173EFA#71a67b43a6b011e4bb7f000000173efa#71a67b43a6b011e4bb7f000000173efa#0#Thread[HTTP Worker [@733688529],5,Dedicated_Application_Thread]#Plain##
An error occurred while trying to generate an SAP authentication assertion ticket.
[EXCEPTION]
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.security.core.server.destinations.lib.AssertionTicketRetriever$GetAssertionTicketPrivAction.run(AssertionTicketRetriever.java:103)
at com.sap.security.core.server.destinations.lib.AssertionTicketRetriever$GetAssertionTicketPrivAction.run(AssertionTicketRetriever.java:68)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.security.core.server.destinations.lib.AssertionTicketRetriever.getAssertionTicket(AssertionTicketRetriever.java:47)
at com.sap.security.core.server.destinations.lib.AssertionTicketJCOProperties.getProperty(AssertionTicketJCOProperties.java:67)
at com.sap.security.core.server.destinations.lib.AssertionTicketJCOProperties.getProperty(AssertionTicketJCOProperties.java:90)
at com.sap.conn.rfc.api.RfcOptions.findProperty(RfcOptions.java:1010)
at com.sap.conn.rfc.api.RfcOptions.getTrimmedProperty(RfcOptions.java:1086)
at com.sap.conn.rfc.api.RfcOptions.getMysapsso2(RfcOptions.java:952)
at com.sap.conn.rfc.engine.RfcIoOpenCntl.rfcio_setopt(RfcIoOpenCntl.java:1180)
at com.sap.conn.rfc.engine.RfcIoControl.ab_rfcopen(RfcIoControl.java:92)
at com.sap.conn.rfc.api.RfcApi.RfcOpen(RfcApi.java:85)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.connect(MiddlewareJavaRfc.java:1408)
at com.sap.conn.jco.rt.ClientConnection.connect(ClientConnection.java:725)
at com.sap.conn.jco.rt.PoolingFactory.init(PoolingFactory.java:115)
at com.sap.conn.jco.rt.ConnectionManager.createFactory(ConnectionManager.java:350)
at com.sap.conn.jco.rt.DefaultConnectionManager.createFactory(DefaultConnectionManager.java:46)
at com.sap.conn.jco.rt.ConnectionManager.getFactory(ConnectionManager.java:324)
at com.sap.conn.jco.rt.RfcDestination.initialize(RfcDestination.java:894)
at com.sap.conn.jco.rt.RfcDestination.getAttributes(RfcDestination.java:605)
at com.sap.conn.jco.rt.RfcDestination.getAttributes(RfcDestination.java:33)
at com.sap.tc.cm.arfc2.model.ARFC2GenericModelClassExecutable.compareModelAndMetadataDestinations(ARFC2GenericModelClassExecutable.java:129)
at com.sap.tc.cm.arfc2.model.ARFC2GenericModelClassExecutable.executeInternal(ARFC2GenericModelClassExecutable.java:97)
at com.sap.tc.cm.arfc2.model.ARFC2GenericModelClassExecutable.execute(ARFC2GenericModelClassExecutable.java:68)
at com.sap.tc.cm.arfc2.gci.ARFC2TypedModelClassExecutable.execute(ARFC2TypedModelClassExecutable.java:54)
at com.sap.demo.test1.wd.comp.new1comp.Cust_test1Controller.executeBapi_Vendor_Getdetail(Cust_test1Controller.java:148)
at com.sap.demo.test1.wd.comp.new1comp.wdp.InternalCust_test1Controller.executeBapi_Vendor_Getdetail(InternalCust_test1Controller.java:168)
at com.sap.demo.test1.wd.comp.new1comp.New1CompView.onActionGetData(New1CompView.java:189)
at com.sap.demo.test1.wd.comp.new1comp.wdp.InternalNew1CompView.wdInvokeEventHandler(InternalNew1CompView.java:141)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:142)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:75)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:159)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.execute(ProcessingEventPhase.java:94)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:162)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:110)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:97)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:515)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:58)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1671)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1485)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:908)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessing(ApplicationSession.java:880)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:357)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:326)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.wdc.DispatcherServlet.doContent(DispatcherServlet.java:101)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:278)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: java.lang.IllegalStateException: No logged in user found.
at com.sap.security.core.server.jaas.SAPLogonTicketHelper.createAssertionTicket(SAPLogonTicketHelper.java:496)
at com.sap.security.core.server.jaas.AssertionTicketFactoryImpl.createAssertionTicket(AssertionTicketFactoryImpl.java:67)
... 92 more
#2.0 #2015 01 28 11:12:47:029#+0530#Error#com.sap.tc.cm.arfc2.model.ARFC2GenericModelClassExecutable#
#BC-XI-CON-RFC#tc~cm~arfc2#C000AC181DC000420000000800E80006#1523450000000004#demo.sap.com/test1#com.sap.tc.cm.arfc2.model.ARFC2GenericModelClassExecutable#Guest#0##6AA3FA37A6B011E49E33000000173EFA#71a67b43a6b011e4bb7f000000173efa#71a67b43a6b011e4bb7f000000173efa#0#Thread[HTTP Worker [@733688529],5,Dedicated_Application_Thread]#Plain##
JCoException while executing the Function ->''BAPI_VENDOR_GETDETAIL'' # -
Delta changes for ECC 6.0
Did anyone know about Delta Changes if i we want to upgrade from 4/6c into ECC6.0 ? Please help.
hi,We will be embarking on an upgrade of SAP R/3 4.6c to mySAP ERP
ECC 6.0 soon (Sep 07). I will be wearing the change management
lead hat, amongst other hats. As far as I know, this will be
purely a 'technical' upgrade, except for some FI changes.
I have 2 questions for which I would appreciate help and
feedback.
(1) From an organization change perspective, is it correct to
assume that there is no impact to business processes nor any
need for retraining as the same screens/windows are presented to
the customer ? The only difference is the delivery vehicle,
from the SAP GUI to WAS 6.2 browser based windows. The screens
and functions remain the same therefore there is no need for
end-user retraining. Is this correct?
(2) We have a team of ABAP skilled technologists supporting the
current R/3 system. I was told that those skills are enough to
support the new ERP 2005 system. Technically, we do NOT do any
customizations of screens or any bolt-on applications. The
tech staff's concentration is on external 3rd party interfaces
to and from SAP and reporting. With the SAP apps now being
delivered via a WAS, I am not totally convinced that we don't
need to beef up our technical staffs skills with J2EE skills. I
was even told that the J2EE stack in SAP is optional (?). What
are the technical skills required to support the new mySAP
environment ? We have Basis covered. My main concern is the
technical staff supporting the business side
i hope that it is healpful to you.
regards,
reddy -
Librfc32.dll installing Documentation
I found in SAP .NET Connector Documentation that the librfc32.dll is required.
I could not found any documentation about installing the librfc32.dll in the framework web server.
Please can you tell me if there are any other requirements besides sap.connector.dll and sap.connector.rfc.dll ?
The full documentation is needed for my system administrator for installing the product.
thanks.Hi Reiner,
1.
Just wondering , if librfc32.dll file was packaged with application for its end user customers- would it be necessary that it be used by SAP system authenticated users only ?
2.
Will it not raise any licensing/distribution concerns, as in like a third party (non-SAP) giving out librfc32.dll with their application ?
Regards
Gurpreet Singh Sidhu -
I have several web services built using the connector 2.0. After I deploy to a bare production machine, I also copied the librfc32.dll to the system32 folder. When I try to use the web services, I get the followig message:
DllExceptionNotFound (cannot find librfc32.dll)
any help is appreciated.
Note: in development, I installed the SAP GUI on the machines and never encountered any problems. Installing the SAP GUI is not an option on the production machines.
PhilipI got an error at time my function to drag and drop function into the SAPProxy1.sapwsdl file.I develope my project as asp.net web application in Visual Studio .NET 2003.
I think, If I see my function at server explorer, how Sap connection can be wrong I dont understand. while I just drag and drop function into the SAPProxy1.sapwsdl file, I get an error.
I installed:
SAP.Net.Setup_2.0
Java 6 update 11 (jr6)
but I 'm getting error below:
using logging implementation u201CAII Loggingu201D Exception in thread u201Cmainu201D com.sap.aii.upload.sap.SAPConnectionexception$connectFailed:Unable to establish connection to R/3 system u2026.(system=..;client..;)
at com.sap.aii.upload.sap.SAPConnection.connect(SAPConnection.java:103)
at com.sap.aii.upload.sap.SAPConnection.(SAPConnection.java:38)
at com.sap.aii.upload.tool.RFC2WSDLTool.getWSDLforRFCs(RFC2WSDLTool.java:81)
at com.sap.aii.upload.tool.RFC2WSDLTool.main(RFC2WSDLTool.java:196)
How can I solve this situation?.
Thank You
Edited by: emrean on Aug 25, 2009 12:55 PM
Edited by: emrean on Aug 25, 2009 12:55 PM -
Descriptions of java dll files for windows
I'm new to java programming and would greatly appreciate of someone could guide to documentation on java dll files for SDK windows..
thanksIf you are new, you don't want to know about the DLLs since there are not much you really need to know except you are writing JNI methods. Even you are writing JNI methods, you don't really need to care about the DLLs. Also I did not notice that there is any documentation about the DLLs/SOs. If you really want it, you may want to get this book: The JavaTM Native Interface by Sheng Liang
If you want toe documentations about JDK:
http://java.sun.com/j2se/1.3/docs/index.html
or
http://java.sun.com/j2se/1.4/docs/index.html -
NCo 2.0 connector - librfc32.dll missing
I am trying to make an RFC call into SAP from a new Windows Server. I am getting the message librfc32.dll missing on the call to SAP.
What do I need to install to get this librfc32.dll on a new Windows server? I can't install Nco 2.0 as I don't have VS 2003 on the new server, nor do I want to put it on there.Hi tristan,
how are you doing ?
as per the pre req for NCo,
u're JRE is requested to be : 1.3
http://help.sap.com/saphelp_nw2004s/helpdata/en/b4/79cb9463b89a41a73e1e2805eb4bf7/frameset.htm
i successfully use j2sdk 1.4_13, but i am aware of issues when you use jdk 1.5 for other SAP [Portal] related products, try jdk 1.4_12 or 1.4_13 and see if there is any difference
also is there any requirment for VS 2003 & 2005 on the same machine ?
i am curious to understand the problems you are facing with this config
with respect,
amit
Maybe you are looking for
-
Printing to Airport Express connected Laserjet 1012 very slow after update to 10.6.8
After updating a pair of computers that we have here to 10.6.8, printing to our Airport Express connected HP LaserJet 1012 has become incredibly slow. I timed it and it is taking 2:30 to print a blank page, whereas printing the same blank page under
-
Procedure to Overwrite Existing Reports in Salesforce
I've been looking around and can't seem to find the proper procedure for overwriting existing reports in Salesforce. While we are on that topic, what is the procedure for uploading new reports? What needs to be checked, filled out, clicked? Whenever
-
Dear All, I want to learn SD module. I have strong IT development experience as well as business process knowledge as I have developed systems for my company. I want your advice how should I proceed. I have access to SAP 4.7. Regards Shiva
-
Routine in Infopackage selection
Hi, We are using DB Connect and hence we need to write a routine in Infopackage selections to restrict the data to be extracted. In the source file, there is a field called " Time stamp". This is a Char 23 field with mm-dd-yyyy-hh.mm.ss.sssss format.
-
I recently purchased a new pc and it comes with Windows7 Operating System. I have Adobe Illustrator 10.03 and it worked perfectly with Windows XP my earlier operating system. I also recently purchased Adobe Acrobat 9 PRO and I'm hping this is not cau