Librfc32 support on Windows server 2008
Hi,
We at Trango Software (division of Siemens Enterprise Networks) are currently using the SAP Remote Function Call runtime as a part of our product (librfc32.dll, File Version 6403.3.55.4580). We will be supporting Windows Server 2008 platform from our product's next release. We are assessing compatibility on Windows Server 2008 platform of all the third-party libraries and tools that are part of our product.
We would like to know if the SAP remote function call runtime dll (librfc32.dll) is currently supported with Windows Server 2008. If not, we would like to know when (tentatively) it is expected to be supported.
Thanks a lot for your help.
Hello,
have you configured the accounts to have the permission "Log on as a service"? I have seen that this is not given to the account and therefore the service fails to start.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:
Similar Messages
-
Microsoft support for Windows Server 2008 R2 on vSphere 5.5
Hi, everybody.
I'm checking if Microsoft will provide support for Windows Server 2008 R2 running on a VM on vSphere 5.5 Update 2. So far what I've found at
http://windowsservercatalog.com is:
Filtering vendor VMware and Windows Server 2008 R2, it shows vSphere up to version 5.0 update 1
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=34&ava=0&avq=0&OR=1&PGS=25&ready=0
http://www.windowsservercatalog.com/item.aspx?idItem=c92e5cbd-9690-b62a-2ace-843390ac3ea4&bCatID=1521
Filtering vendor VMware it shows vSphere 5.5 update 2, but details only Windows Server 2012, not Windows Server 2008 R2.
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=0&ava=0&avq=0&OR=1&PGS=25&ready=0&PG=2
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
Does that mean Microsoft doesn't support Windows 2008 R2 on vSphere 5.5 update 2?
I'm aware Windows Server 2008 R2 lifecycle is close to EOL, but customer requires this specific version for application compatibility.
ThanksHi mdgrkb,
Products that have passed the SVVP requirements for Windows Server 2012 R2 are considered supported on Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, and
Windows Server 2003 SP2 and later Service Packs, both x86 and x64.
Look this website the top left additional information:
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Anyconnect v3.0 support on Window server 2008 NPS
Hi Forumers'
Just wnat to check out, does the non-microsoft based OS client OS (Example: MacOS, ubuntu, Andriod) supoprt anyconnect v3.0
And also if my RADIUS server is host using window server 2008 Network Policy Server (NPS) component, can this doing the 802.1X ahtneticating?
thanks
NoelHi Noel,
You can check the system requirements for Anyconnect 3.0 in the release notes for support on non Microsoft OS:
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect30/release/notes/anyconnect30rn.html#wp1263243
For 802.1x with NPS. the following link might help you. before that let me tell you, i have never tried this. I was just searching for something and i bumped into this one.
http://technet.microsoft.com/en-us/library/dd283087%28WS.10%29.aspx
Hope this helps.
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts. -
Crystal Reports Supported on Windows Server 2008?
Right now, we have it running on Server 2000, but server is being replaced. Would like to go with Windows Server 2008, but, making sure application compatibility first. I have searched the internets, have even called, and cannot get a straight answer.
What Windows OS does Crystal Reports support? And by support, I mean "work without glitches".Well, there's both gated and ungated content, but Crystal Reports, Crystal Reports Server and Crystal Xcelsius should all have ungated equivalents.
It's just that not everyone on this side of the web browser has got the message.
I do regret this.
The CR2008SP1 supported platforms (ungated) is found here:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0d494c2-696b-2b10-e8b5-e7083c7be019]
Windows 2003 is supported, and Windows 2008 is supported starting with SP1.
Sincerely,
Ted Ueda -
Hp deskjet 2545 printer driver not supporting on windows server 2008 r2
I have purchased a 3 in 1 hp deskjet 2545 printer. I am trying to configure in on my home laptop (HCL) operating system: windows server 2008 R2, but unable to configure it. customer support executive told me hp deskjet 2545 printer driver is not compatible on windows server 2008 R2. but I have checked in my office and it is working fine on my office 2008 server. Please help.
Hello Arvindk,
Welcome to the HP Support Forums! I understand you are trying to use your HP Deskjet 2545 with your Windows Server 2008 R2. Because you are using a server your question will be best answered on the Commercial Forums: http://h30499.www3.hp.com/hpeb/
I was able to find this document for Installing the Printer Software on Windows Server 2003 or 2008, which may be helpful for you.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Adobe Air 3.6 - Support for Windows Server 2008 R2?
Hello all,
Adobe lists "Windows Server 2008" in the list of supported operating systems.
We tested our application on a Win 2008 R2 terminal server and could'nt find any issues so far. Is there a reason why Adobe does not list "Windows Server 2008 R2" (64 Bit) in the supported platforms list?
Thanks in advance!Hello Tobias
please have a look at the SAP note
[66971|https://service.sap.com/sap/support/notes/66971]
Win 2008 Server R2 is not released for Sapgui 710 !
Only Sapgui 720 is released for this Windows OS!
Also please note the Sapgui 710 is supported until the 12. of April 2011 !
Please see note [147519|https://service.sap.com/sap/support/notes/147519] !
Best Regards
Sven -
Is LiveCycle ES 9.0 supported on Windows Server 2008 32 bit
Is LiveCycle ES only supported on 64 bit environments or can we run 32 bit?
Thanks!
NoamHi Noam,
Please have a look at the supported platforms @ http://help.adobe.com/en_US/LiveCycle/9.5/supported_platforms.html
Thanks,
Hina -
Does XI 3.1 SP2 support Windows Server 2008 Release 2?
In the supported platforms guide for Business Objects XI 3.1 SP2 it lists support for Windows Server 2008 but I'm curious if it will support 2008 Release 2???
2012 R2 is not mentioned (that article is over two years old),
Would be kinda hard to mention a non-existent operating system in a 2 year old blog post, eh?
Maybe the Blog entry could be updated?
There's no need to update the blog post once you understand the specifics of the update. The update introduces NEW functionality required for ALL operating systems from Windows 8 forward.
Also, maybe you shouldn't be so literal in your search efforts? :-) Think outside the box a bit, eh? Understand *why* the update was created. What does the update do that makes WSUS v3 work for Win8/WS2012. Is there some reason that wouldn't work for subsequent
operating systems? You didn't have the update anyway, did it never cross your mind.. "Hey.. maybe I should do this... anyway?"
Nevermind the hundreds of conversations in this forum about KB2734608 and the dozens of times Win8.1 or WS2012R2 is mentioned in those conversations.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Windows Server 2008/SQL 2008 support?
Does the latest release of Business Object support MS Windows Server 2008 and SQL server 2008? We are currently running BO 11.5R2 and would like to upgrade to the latest version. Since we are also upgrading our servers to the latest 2008 versions of Windows Server and SQL server, it would be nice to know if we can install this to our new hardware.
Thanks,
PeterXI 3.1 or later supports both. See the [supported platforms|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/60cdb229-d874-2b10-18ac-ed2f46873753&overridelayout=true] for more info
Regards,
Tim -
ACS any Version with Domain Controller on Windows Server 2008 R2 64bit
Hi All
Is there currently any ACS version working with Windows Server 2008 R2 domain controllers?
Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.
I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
Thanks
patoHi AllIs there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our
server stuff has recently upgraded the Domain Controllers to 2008r2 and
turned off the 2003 servers. This didn't make our ACS 4.1.4 really
happy.I've read now serveral posts regarding issues with ACS and
Server 2008r2 and hope to find a solution (besides switching to LDAP,
yukk).Thankspato
Hi Pato,
Just check out the below link hope that help.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html
As per the link it says The support for Windows Server 2008 is applicable for ACS 4.2 Patch 4 onwards.
Hope to Help !!
Remember to rate the helpful post
Ganesh.H -
Running oracle database xe (express edition) on windows server 2008 r2
Is it supported to run Oracle Database XE on Windows Server 2008 R2?
Database XE is only supported as 32-bit. Current builds of Windows Server 2008 only come in x64 configurations.
Here are the Database XE system requirements for windows:
[http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm]
The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.
Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).
See:
- [Wikipedia page about windows server 2008 with info on R2|http://en.wikipedia.org/wiki/Windows_Server_2008#Windows_Server_2008_R2]
- [Wikipedia page on "windows 32-bit on windows 64-bit"|http://en.wikipedia.org/wiki/WOW64]
Thanks,
MattHello Matt,
Is it supported to run Oracle Database XE on Windows Server 2008 R2?No.
The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.So this means that only 32bit versions of 2008 will be supported.
Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).Which is probably why 2008 R2 is not supported.
You can either take the VM approach and install a 32 bit Windows or 64 bit Linux host, or you can queue in the list of persons waiting for a 64 bit Windows release. See the following thread for details (and the queue) for the latter: {thread:id=2277728}
-Udo -
Crystal Reports XI R2 SP2 on Windows Server 2008 ( 32 bit system)
Hi Forum,
I am trying to run a .NET application on a windows server 2008( 32 bit system) with Crystal Reports X1 R2 SP2 installed.
The application does not run and throws the following error in the event log.
Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x0171ab98, process id 0x%9, application start time 0x%10.
The same application runs fine on a windows server 2003.Also, the same application runs fine, when i remove the crystal reports code. It loads the .NET pages fine.
Please suggest me if i am missing something. Please let me know how can i debug this issue?Hello,
Crystal reports XIR2 is not supported on Windows server 2008.
Check the supporting platforms guide here.
[Crystal Reports XI Release 2 SP2 - Supported Platform Info|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/7081b21c-911e-2b10-678e-fe062159b453]
Thanks,
Bhushan. -
Is there a restriction to install ODBO driver on Windows Server 2008 64bits
For SAP BusinessObjects Business Planning and Consolidation (BPC) version 7.5 Microsoft it is possible to connect with Xcelsius using an ODBO provider installed on the BPC server. In the installation Guide for BPC it is specified the need to add following key to the registry:
http://HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Business Objects\Suite 12.0\MDA\ODBO
"SupportedProviders"="BPCMDX.4"
When installing on a Windows Enterprise Server 2003 64 bits I can find the registry three path to http://HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Business Objects\Suite 12.0\MDA\ODBO . On a Windows Enterprise Server 2008 64 bits I cannot see the key path.
I copy below the paragraph regarding ODBO driver from BPC 7.5 Installation Guide:
Prerequisites
The following software is installed:
n SAP BusinessObjects Enterprise XI 3.1 SP02 (see Downloading and Installing the Central Management System
page 15).
n Microsoft Visual C+ 2005 Service Pack 1 Redistributable Package ATL Security Update+
on the Planning and Consolidation Web server and SAP BusinessObjects Enterprise
XI 3.1 SP02 server for Voyager or a Universe. You can download the installer from
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID
=766a6af7-ec73-40ff-b072-9112bab119c2 and choose vcredist_x86.exe.
Procedure
1. Download the Planning and Consolidation ODBO provider from the SAP Download area by
selecting Downloads Installations & Upgrades on the SAP Service Marketplace.
2. Navigate to <drive>:\odbo and run the client.exe file.
3. Add the Planning and Consolidation ODBO provider to the Data Driver by entering this registry
setting:
http://HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\MDA\ODBO
"SupportedProviders"="BPCMDX.4"I found the answer, Xcelsius 2008 SP3 is not supported on Windows Server 2008.
Before trying to use more products please check the supported platforms for all products. For example you can see in Xcelsius documentation that SAP Business Objects Xcelsius 2008 SP3 is not supported on Windows Server 2008. This means that, even if BPC 7.5M supports Windows Server 2008, it is not possible to use both BPC 7.5M and Xcelsius 2008 SP3 on a Windows Server 2008. -
HP Laserjet CP2025 Windows Server 2008 R2 Universal Printer Driver problem
Is there support for Windows Server 2008 R2 for the CP2025n printer, I've been trying to get it to work with a standard TCP port with the universal driver but no luck.
Any ideas?I have Windows 2003 servers with the Universal PCL6 driver v5,4. It printed slower then the previous version. I manually changed the Device Settings, mainly the Monochrome / Color option. This seemed to make the print process faster.
-
How to install oracle 10g in windows server 2008
I want to install oracle 10 (10.2.0.4.0) in windows server 2008 R2 X64 bit version.
Previously i have test this successfully. But not it's giving an error during the installation
Enterprise manager configuratio failed due to the following error-
Error starting Database Control
Refer the log file at (path).....\emConfig.log for more details.
You can retery configuring this database wlth Enterprise Manager later by manually running (path).....\bin\emca script.
I tried to start the service manually from services. But it didn't work.
I tried to run that script using command prompt. but nothing happened.
in my start menu under oracle home db-console link also not there.
here is my log file
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter Enterprise Manager Root Password :
************Certificate was added to keystore
Certificate reply was installed in keystore
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.FileUtil printFileToLog
CONFIG: Printing file(After Secure DBConsole): D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_AX-2009_AX2009\config\http-web-site.xml
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE web-site PUBLIC "OracleAS XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site-9_04.dtd">
<web-site port="1158" display-name="OC4J Java HTTP Web Site" secure="TRUE">
<!-- The default web-app for this site, bound to the root -->
<default-web-app application="default" name="defaultWebApp"/>
<web-app application="default" name="dms0" root="/dms0"/>
<web-app application="default" name="dms" root="/dmsoc4j"/>
<web-app application="em" name="em" load-on-startup="true" root="/em" shared="true" />
<!-- Access Log, where requests are logged to -->
<access-log path="../log/http-web-access.log"/>
<!-- Uncomment this if you want to use ODL logging capabilities
<odl-access-log path="../log/http-web-access" max-file-size="1000" max-directory-size="10000"/>
-->
<ssl-config needs-client-auth="false" keystore="D:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_AX-2009_AX2009/config/server/keystore.test" keystore-password="BC062AD3D852A5B5D02E979B69DD12B3" />
</web-site>
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleAX2009
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:58 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Initialization failure for service during start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\AX2009\emConfig.log for more details.
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)
at java.lang.Thread.run(Thread.java:595)
please if any one can give me any solution to run my database console. i don't know any method. i'm new to the oracle.
Thank youI have checked that. but i also say that oracle 10g (10.2.0.4 ) support for windows server 2008 r2 X64.
Windows Server 2008 x64
Oracle Database 10g Release 2 (10.2.0.4 or later) for Windows x64 is certified on Windows Server 2008 x64 (all editions). 32-bit Oracle Database Client (10.2.0.4) and higher versions are supported on Windows Server 2008 x64.
I don'y think it's problem of os version or oracle version. Because when we purchase we asked from them what is the recommended version for our os. they told that 10g 10.2.0.4 is ok. previously i have installed this successfully. But now i can't.
however thanks for tried to help me. if u can find out any other reason\s please late me know..
thank you very much.
Maybe you are looking for
-
Upgrade Error phase STARTSAP_NBAS
Hi all, I am upgrading from 47-200 to ECC6 on SQL server. I am using downtime minimized. I am having issue in STARTSAP_NBAS phase with error : "System start failed code 02, test RFC did not work, try to log on to system with user DDIC" When I am tryi
-
How do I transfer files from old computer to the new one
I have bought the desktop and used migration asiitant to transfer files but nothing came through, how do i transfer files
-
Whenever I try to sync my iPhone 3Gs it always fails, saying the device timed out. Any suggestions with what to do??
-
Purchase Requisition with Accound Assignment Category = F
Hello Gurus, Background information A material C1 is a component procured externally (F) and belongs to bills of material of material A1 produced internally (E). A reservation is created for material C1 due to production order for A1 what can be over
-
can we get info of the cd-rom drive example, like the size, or folders number??? sorry for my english thx