LibXp.so.6 is needed by openmotif21-2.1.30
I have Red Hat 5 64 bits.
I need install openmotif21-2.1.30-11.EL5.i386.rpm
[root@srvrcotest rpms_gcl]# rpm -ivh openmotif21-2.1.30-11.EL5.i386.rpm
error: Failed dependencies:
libXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386
[root@srvrcotest lib]# rpm -qa | grep libXpm*
libXpm-3.5.5-3
libXpm-devel-3.5.5-3
libXpm-3.5.5-3
libXp-1.0.0-8.1.el5
Regards,
Guido
I hope you are not looking for the CDE motif based desktop, like what is still used on some commercial platforms. Are you? If yes, you might find openmotif resourceful. In short CDE (dtwm) has since been phased out in favour of GNOME about 10 years ago and is no longer available, not for free. Openmotif is not CDE.
Anyway, the packages that provides libXp.so.6 are libXp-1.0.0-8.1.el5.i386 (32bit) and libXp-1.0.0-8.1.el5.x86_64 (64bit)
Do you have valid subscription to Red Hat? If yes then you can use the up2date utility to install openmotif and resolve the dependencies issue. Btw, if you were using Oracle Linux, you could configure free access to the public Oracle software repository and simply type "yum install openmotif" to install all the stuff.
Similar Messages
-
LibXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386
Hi ,
can anyone help me to install "openmotif21-2.1.30-11.EL5.i386"
i received this error when i run the rpm file..
[root@bladj ~]# rpm -ivh openmotif21-2.1.30-11.EL5.i386.rpm
error: Failed dependencies:
libXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386
how to install this rpm? help please...
Thanks BJCDRHere is one way of determining what RPM a file is part of if you have a machine to compare it against:
1) First locate the file that you are having a problem with.
[root@rac1 ~]# locate libXp.so.6
/usr/X11R6/lib/libXp.so.6
/usr/X11R6/lib/libXp.so.6.2
2) Second, query the RPM database with the file located in step 1.
[root@rac1 ~]# rpm -qf /usr/X11R6/lib/libXp.so.6
xorg-x11-deprecated-libs-6.8.2-1.EL.33.0.1
Hope this helps,
Brian -
LibXp.so.6 is needed
Howdy kids. I bought a Fedora book and now installing paclages isnt so intimidating. :-) Anyways, Im installing 9i using the instructions for 10g on Fedora3 at:
http://www.puschitz.com/InstallingOracle10g.shtml#InstallingOracle10g
So, I try to run the article command:
su - root
rpm -Uvh openmotif-2.2.3-6.i386.rpm xorg-x11-deprecated-libs-6.8.1-12.i386.rpm
and get the message:
error: Failed dependencies:
libXp.so.6 is needed by openmotif-2.2.3-6.i386
Ive looked on the cd's for this libXp.so.6 and cant find it anywhere. How do I ontain such an animal? I looked @ the Fedora sight and came up short. Sorry if this isnt the right forum to ask this type of question.
TIA, ChrisRI can't answer your question (it seems, you have a problem with your openmotif environment, that is an OS issue) , but here's another URL, how to install Oracle 10g (unfortunately not 9i) on Fedora:
http://www.oracle-base.com/articles/10g/OracleDB10gInstallationOnFedora3.php -
Hello All,
I am a newbie. I am trying to install R12.1.3 in OEL6. In metalink note: 761566.1. One of the pre-reqs are openmotif21-2.1.30-11.EL6.i686. my machine is 86x64.
I have installed OEL6 on 86x64 machine. when i try to install openmotif21. This has few dependencies but not able to find them.
can you guys please help me.
Thanks
Muthu
[root@amk tmp]# rpm -i openmotif21-2.1.30-11.EL6.i686.rpm
error: Failed dependencies:
libICE.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libSM.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libX11.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libXext.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libXp.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libXt.so.6 is needed by openmotif21-2.1.30-11.EL6.i686Hello Hussein ,
I installed OEL x64. in the initial message you had given me a note which asked me to install oracle as a workstation where all the default RPMs are installed. When I did so . I did not find the openmotif21-2.1.30-11.EL6.i686.rpm. so Downloaded from the oracle site . when I install that, below is the message I get. can you please help me.
Shud I install the Linux with some other option, please help me. I am either not understanding the note you have suggested or something is wrong with the version.
Thanks a lot for the help.
Muthu
[root@amk Downloads]# rpm -i openmotif21-2.1.30-11.EL6.i686.rpm
error: Failed dependencies:
libICE.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libSM.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libX11.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libXext.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libXp.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libXt.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libc.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
libc.so.6(GLIBC_2.0) is needed by openmotif21-2.1.30-11.EL6.i686
libc.so.6(GLIBC_2.1) is needed by openmotif21-2.1.30-11.EL6.i686
libc.so.6(GLIBC_2.1.3) is needed by openmotif21-2.1.30-11.EL6.i686
libc.so.6(GLIBC_2.2) is needed by openmotif21-2.1.30-11.EL6.i686
libc.so.6(GLIBC_2.3) is needed by openmotif21-2.1.30-11.EL6.i686
libc.so.6(GLIBC_2.3.4) is needed by openmotif21-2.1.30-11.EL6.i686 -
Try to install openmotif21-2.1.30-11.EL5.i386.rpm dte eroor
when try to install openmotif21-2.1.30-11.EL5.i386.rpm get this error
[root@EBSS rpm]# rpm -ivh openmotif21-2.1.30-11.EL5.i386.rpm
error: Failed dependencies:
libXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386
and i don't have Linux unbreakable account to install libXp.so.6
is there any work around and must have unbreakable to intsall it ?Micel 811 wrote:
when try to install openmotif21-2.1.30-11.EL5.i386.rpm get this error
[root@EBSS rpm]# rpm -ivh openmotif21-2.1.30-11.EL5.i386.rpm
error: Failed dependencies:
libXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386
and i don't have Linux unbreakable account to install libXp.so.6
is there any work around and must have unbreakable to intsall it ?You can download libXp.<version>.i386.rpm from http://rpm.pbone.net/index.php3?stat=3&search=libXp&srodzaj=3
Thanks,
Hussein -
Try to update to 2.1 - Phone stops
Just trying to update my iPhone from 2.0.2 to 2.1 Suddenly the apple-logo appears on my screen. iTunes gives the following notification: The phone cannot be restored due to an unknown error (2005).
I tried it a few times, but no results.
I've used the ports on the back of my G4, but that doesn't help. Does someone have the same problem, en most of all, a solution for it?Micel 811 wrote:
when try to install openmotif21-2.1.30-11.EL5.i386.rpm get this error
[root@EBSS rpm]# rpm -ivh openmotif21-2.1.30-11.EL5.i386.rpm
error: Failed dependencies:
libXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386
and i don't have Linux unbreakable account to install libXp.so.6
is there any work around and must have unbreakable to intsall it ?You can download libXp.<version>.i386.rpm from http://rpm.pbone.net/index.php3?stat=3&search=libXp&srodzaj=3
Thanks,
Hussein -
The following packages were added to your selection to satisfy dependencies
I'm going to install Oracle R12 and a few other things. I've applied all the required linux packages by hand previously and wanted to try the ULN to use the oracle validate package. I bought a network subscriiption, registered my server after installing OEL 5.5. It's a Dell R410.
Using the oracle_validate package does not apply all the dependent packages. What am I missing or doing wrong? I get the message I am missing dependencies no matter what I do. I thought that was the entire point of the packge to not have to apply all these packages by hand.
[root@vicr410 sysconfig]# up2date nox show-channels
el5_x86_64_addons
el5_x86_64_latest
el5_u5_x86_64_patch
ol5_x86_64_latest
el5_x86_64_oracle
I tried: up2date --install oracle-validated to install the required database packages. The resulting message is "The following packages were added to your selection to satisfy dependencies".
Testing package set / solving RPM inter-dependencies...
There was a package dependency problem. The message was:
Unresolvable chain of dependencies:
glibc-headers 2.5-49.el5_5.7 requires kernel-headers
glibc-headers-2.5-49.el5_5.7 requires kernel-headers >= 2.2.1
oracle-validated 1.1.0-6.el5 requires kernel-headers
The following packages were added to your selection to satisfy dependencies:
Package Required by
elfutils-libelf-devel-0.137-3.el5.x86_64oracle-validated-1.1.0-6.el5 elfutils-libelf-devel
gcc-4.1.2-48.el5.x86_64 oracle-validated-1.1.0-6.el5 gcc
gcc-c++-4.1.2-48.el5.x86_64 oracle-validated-1.1.0-6.el5 gcc-c++
gdb-7.0.1-23.el5_5.2.x86_64 oracle-validated-1.1.0-6.el5 gdb
glibc-devel-2.5-49.el5_5.7.i386 oracle-validated-1.1.0-6.el5 /usr/lib/libc.so
glibc-devel-2.5-49.el5_5.7.x86_64 oracle-validated-1.1.0-6.el5 /usr/lib/libc.so
glibc-devel-2.5-49.el5_5.7.x86_64 oracle-validated-1.1.0-6.el5 /usr/lib64/libc.so
glibc-headers-2.5-49.el5_5.7.x86_64 oracle-validated-1.1.0-6.el5 glibc-headers
libaio-devel-0.3.106-5.x86_64 oracle-validated-1.1.0-6.el5 libaio-devel
libgomp-4.4.0-6.el5.x86_64 gcc-4.1.2-48.el5 libgomp
sysstat-7.0.2-3.el5_5.1.x86_64 oracle-validated-1.1.0-6.el5 sysstat
unixODBC-devel-2.2.11-7.1.x86_64 oracle-validated-1.1.0-6.el5 unixODBC-devel
I tried to add the rpm oracle-validated-1.0.0-22.el5.x86_64.rpm using
rpm -ivh oracle-validated-1.0.0-22.el5.x86_64.rpm.
[root@vicr410 Server]# rpm -ivh oracle-validated-1.0.0-22.el5.x86_64.rpm
error: Failed dependencies:
/usr/lib/gcc/x86_64-redhat-linux/4.1.1/libstdc++.a is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libaio.so is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libc.so is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libodbc.so.1 is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libodbccr.so is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib64/libc.so is needed by oracle-validated-1.0.0-22.el5.x86_64
compat-gcc-34 is needed by oracle-validated-1.0.0-22.el5.x86_64
compat-gcc-34-c++ is needed by oracle-validated-1.0.0-22.el5.x86_64
elfutils-libelf-devel is needed by oracle-validated-1.0.0-22.el5.x86_64
gcc is needed by oracle-validated-1.0.0-22.el5.x86_64
gcc-c++ is needed by oracle-validated-1.0.0-22.el5.x86_64
gdb is needed by oracle-validated-1.0.0-22.el5.x86_64
glibc-headers is needed by oracle-validated-1.0.0-22.el5.x86_64
kernel-headers is needed by oracle-validated-1.0.0-22.el5.x86_64
libXp.so.6 is needed by oracle-validated-1.0.0-22.el5.x86_64
libaio-devel is needed by oracle-validated-1.0.0-22.el5.x86_64
libdb-4.2.so()(64bit) is needed by oracle-validated-1.0.0-22.el5.x86_64
libodbc.so.1()(64bit) is needed by oracle-validated-1.0.0-22.el5.x86_64
sysstat is needed by oracle-validated-1.0.0-22.el5.x86_64
unixODBC-devel is needed by oracle-validated-1.0.0-22.el5.x86_64Cool. That worked. All the missing packages were installed
[root@vicr410 ~]# up2date nox show-channels
el5_ia64_latest
el5_i386_latest
[root@vicr410 ~]# up2date --install oracle-validated
Fetching Obsoletes list for channel: el5_ia64_latest...
Fetching Obsoletes list for channel: el5_i386_latest...
Fetching rpm headers...
Name Version Rel
oracle-validated 1.0.0 24.el5 i386
Testing package set / solving RPM inter-dependencies...
compat-db-4.2.52-5.1.i386.r ########################## Done.
compat-gcc-34-3.4.6-4.i386. ########################## Done.
compat-gcc-34-c++-3.4.6-4.i ########################## Done.
elfutils-libelf-0.137-3.el5 ########################## Done.
elfutils-libelf-devel-0.137 ########################## Done.
elfutils-libelf-devel-stati ########################## Done.
gcc-4.1.2-48.el5.i386.rpm: ########################## Done.
gcc-4.1.2-48.el5.i386.rpm: ########################## Done.
gcc-4.1.2-48.el5.i386.rpm: ########################## Done.
gcc-c++-4.1.2-48.el5.i386.r ########################## Done.
gdb-7.0.1-23.el5_5.2.i386.r ########################## Done.
glibc-devel-2.5-49.el5_5.7. ########################## Done.
glibc-headers-2.5-49.el5_5. ########################## Done.
libXp-1.0.0-8.1.el5.i386.rp ########################## Done.
libaio-devel-0.3.106-5.i386 ########################## Done.
libstdc++-devel-4.1.2-48.el ########################## Done.
oracle-validated-1.0.0-24.e ########################## Done.
sysstat-7.0.2-3.el5_5.1.i38 ########################## Done.
unixODBC-2.2.11-7.1.i386.rp ########################## Done.
unixODBC-devel-2.2.11-7.1.i ########################## Done.
libgomp-4.4.0-6.el5.i386.rp ########################## Done.
Preparing ########################################### [100%]
Installing...
1:unixODBC ########################################### [100%]
2:libgomp ########################################### [100%]
3:sysstat ########################################### [100%]
4:libXp ########################################### [100%]
5:gdb ########################################### [100%]
6:elfutils-libelf ########################################### [100%]
7:compat-db ########################################### [100%]
8:libstdc++-devel ########################################### [100%]
9:glibc-headers ########################################### [100%]
10:glibc-devel ########################################### [100%]
11:unixODBC-devel ########################################### [100%]
12:libaio-devel ########################################### [100%]
13:compat-gcc-34 ########################################### [100%]
14:gcc ########################################### [100%]
15:gcc-c++ ########################################### [100%]
16:compat-gcc-34-c++ ########################################### [100%]
17:elfutils-libelf-devel ########################################### [100%]
18:elfutils-libelf-devel-s########################################### [100%]
19:oracle-validated ########################################### [100%]
The following packages were added to your selection to satisfy dependencies:
Name Version Release
compat-db 4.2.52 5.1
compat-gcc-34 3.4.6 4
compat-gcc-34-c++ 3.4.6 4
elfutils-libelf 0.137 3.el5
elfutils-libelf-devel 0.137 3.el5
elfutils-libelf-devel-static 0.137 3.el5
gcc 4.1.2 48.el5
gcc 4.1.2 48.el5
gcc 4.1.2 48.el5
gcc-c++ 4.1.2 48.el5
gdb 7.0.1 23.el5_5.2
glibc-devel 2.5 49.el5_5.7
glibc-headers 2.5 49.el5_5.7
libXp 1.0.0 8.1.el5
libaio-devel 0.3.106 5
libstdc++-devel 4.1.2 48.el5
sysstat 7.0.2 3.el5_5.1
unixODBC 2.2.11 7.1
unixODBC-devel 2.2.11 7.1
libgomp 4.4.0 6.el5 -
Need Help Installing 11.5.10.2 on Linux
Hi everyone,
I have been trying to install EBS 11.5.10.2 on linux (both downloaded from edelivery )
but the RDBMS install fails saying adlnkoh.sh script error in log file. the error is that it cannot find the sqlplus file in ORACLE_HOME/bin directory..i have checked for the same and its missing too. i had previously checked for the file before rapid install runs adlnkoh.sh and the file was there, as soon as the script starts running sqlplus file is deleted.
any help to make my installation proceed would be greatly appreciated.i remmber i faced such a prolblem but it dose not remove it it just rename it to sqlplus.old i guess but the solution was that one of the prereques patchs was not applied you need to double check all your pre-reqs
for redhat 4 check the follwoing
Legacy Software Development package and X Software Development package
Note: Select these packages from the Package Group Selection screen. If the operating system is already installed, use System Settings > Add/Remove Applications to install these two packages.
The following components will be installed automatically:
• compat-db-4.1.25-9
• compat-gcc-32-3.2.3-47.3
• compat-gcc-32-c++-3.2.3-47.3
• compat-oracle-rhel4-1.0-5
• compat-libcwait-2.0-2
• compat-libgcc-296-2.96-132.7.2
• compat-libstdc++-296-2.96-132.7.2
• compat-libstdc++-33-3.2.3-47.3
• xorg-x11-deprecated-libs-devel-6.8.1-23.EL
• xorg-x11-deprecated-libs-6.8.1-23.EL
• openmotif21-2.1.30-11.RHEL4.4
• libaio-0.3.102-1
• libaio-devel-0.3.102-1
The following required component must be installed manually:
• openmotif-2.1.30-x
- After system bootup, login as root and insert the Disk3:
The following required components must be installed manually:
• openmotif21-2.1.30-11.RHEL4.4
• libaio-0.3.102-1
• libaio-devel-0.3.102-1
2. Apply one of these OS library patches: 4198954 (for Red Hat 4.0), 3006854 (for Red Hat 3.0) reboot your system
fadi hasweh
http://oracle-magic.blogspot.com -
Where to obtain package of openmotif21-2.1.30-11
Hello,
I am in the process of installing OEM Grid 10204 on Linux 2.6.18-128.el5 on Oracle Enterprise Linux. I am checking the packages required for installation and I need openmotif21-2.1.30-11. Where can I download openmotif21-2.1.30-11 and its dependencies from Oracle website? Can I download this package from another non-oracle website? Thank you in advance.Hi,
Is openmotif21-2.1.30-11 the same as openmotif-2.1.30-11? And how to search for openmotif-2.1.30-11 from this link http://oss.oracle.com/projects/compat-oracle/files/Enterprise_Linux/ ?
I have openmotif21-2.1.30-11.EL5 installed but OEM Grid installation complains?
Checking for openmotif-2.1.30-11; found Not found. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
$ rpm -qa | grep openmotif
openmotif21-2.1.30-11.EL5 -
Arch64: really need to get Citrix ICA client 10 working (and others)
Hi,
I am currently running Arch64 Voodoo on my Dell M65 notebook. It is a really great and fast distro and I am trying to make it my default distribution ....... however for my work I absolutely Must use the citrix ICA client (v10).
Unfortunately it won't install, it gives me a wrong ELF class on libxaw.so.7
I looked around in the community llib32 stuff, but it doesn't appear to be there, can anyone help me getting ICA working, I really need this and It would suck having to switch to another distro or the 686 version. There isn't a source version from ICA available so I cannot compile it myself.
On a side note I also have a minor java problem, I want to install azureus but that has a dependency to jre6 and I want to install OpenOffice.org but that has a dependency fo java-cgj-compat, does anyone have a olution for this? I already downloaded SUN's jre from their site but ofcourse the package azureus doesn't know this.
thanks a lot in advance,
stefanI haven't heard of these emul32 packages before, but I think what you need are the proper lib32 packages. Specifically one for libxaw. Unfortunately, one isn't available in the AUR. I took a look at some of the other lib32 PKGBUILDs and all they seem to do is download the i686 package for the corresponding library, uncompress it, and copy all the shared object files to /opt/lib32/usr/lib. With all that said, here is a PKGBUILD for lib32-libxaw.
I won't be adding this to the AUR because I don't use it & therefore don't want to maintain it, but anyone else may submit it if they choose.
Looks like this library should depend on libxmu, libxpm and libxp. The first is available in the community repo as lib32-libxmu. The other two can be downloaded from the AUR as lib32-libxpm and lib32-libxp.
_pkgsourcename=libxaw
pkgname=lib32-$_pkgsourcename
pkgver=1.0.4
pkgrel=1
pkgdesc="X11 Athena Widget library"
url="http://xorg.freedesktop.org/"
arch=('x86_64')
groups=('lib32')
depends=('lib32-libxmu' 'lib32-libxpm' 'lib32-libxp')
source=(ftp://ftp.archlinux.org/extra/os/i686/$_pkgsourcename-$pkgver-$pkgrel.pkg.tar.gz)
md5sums=('5dd7b928b96b72e4d31bd29c957b7fc5')
build() {
cd $startdir/src
mkdir -p $startdir/pkg/opt/lib32/usr/lib
cp -dp usr/lib/*.so* $startdir/pkg/opt/lib32/usr/lib -
Problem installing LibXp package
Hello,
I have a problem when i try to install oracle 10g2 when i get an error message. I read this forum which btw has lots of stuffs for studying since i am new to linux :) and i found out that i need to install the libXp package. My problem is that i cant install this package since when i open it it says that it cannot install source packages and i when i run it from the terminal i get this message:
cannot create %sourcedir /usr/src/redhat/SOURCES
I tried to check other topics in case i find something similar but there were too many and i got tired. If you can specify me a guide for how to unpack those files it would be appreciated. I am running Red hat enterprise Linux 5.
Thanx in advance for your helpSorry if this is getting tiring but i used the first method i and i got the result you can see in the picture below.
http://s236.photobucket.com/albums/ff93/mstavra/?action=view¤t=1.jpg
I read somewhere that those warnings are no need to be taken into consideration.However, i cant find the package in the installed packages of my system and when i try to install oracle i get exactly the same error as before:
"libxp.so.6: cannot open shared object file"
Concerning the pirut, i dont think i can use it since it says: "Unable to import modules. Maybe you are not running under X?"
Now i am trying the third method. I hope that this will fix it
*EDIT: I might be wrong for the pirut. I forgot i was not as root when i tried that. I opened now the package with opening with other application --> use a custom command. There i typed pirut and it opened me a window with all the installed packages. I am stuck there atm and trying to figure it out :) -
Prerequisites needed for installing R12 in linux (64-bit)
Hi,
Please list the OS Prerequisites needed for installing R12 (Vision dB) in RedHat ES. Please also let me know whether it will support 64-bit
Thanks,
AnandI do not think it is possible to paste the whole page. However, please find below all the details which are relevant to Red Hat Enterprise Linux AS/ES 4.0
Kernel Requirements & Settings
Red Hat Enterprise Linux AS/ES 4.0: 2.6.9-42.EL
Edit the /etc/sysctl.conf file to configure your kernel settings. After editing the file, use the "sysctl -p" command or restart the system to invoke the new settings.
kernel.semmsl: 256
kernel.semmns: 32000
kernel.semopm: 100
kernel.semmni: 142
kernel.shmall: 2097152
kernel.shmmax: Half the size of the physical memory (in bytes), and at least 2147483648
kernel.shmmni: 4096
kernel.msgmax: 8192
kernel.msgmnb: 65535
kernel.msgmni: 2878
fs.file-max: 65536
net.ipv4.ip_local_port_range: 1024 65000
net.core.rmem_default: 262144
net.core.rmem_max: 262144
net.core.wmem_default: 262144
net.core.wmem_max: 262144
Required Packages
- binutils-2.15.92.0.2-21.x86_64.rpm
- compat-db-4.1.25-9.i386.rpm (32-bit)
- compat-db-4.1.25-9.x86_64.rpm
- control-center-2.8.0-12.rhel4.5.x86_64.rpm
- gcc-3.4.6-3.x86_64.rpm
- gcc-c++-3.4.6-3.x86_64.rpm
- glibc-2.3.4-2.25.i686.rpm (32-bit)
- glibc-2.3.4-2.25.x86_64.rpm
- glibc-devel-2.3.4-2.25.i386.rpm (32-bit)
- glibc-devel-2.3.4-2.25.x86_64.rpm
- glibc-common-2.3.4-2.25.x86_64.rpm
- gnome-libs-1.4.1.2.90-44.1.x86_64.rpm
- libstdc++-3.4.6-3.i386.rpm (32-bit)
- libstdc++-3.4.6-3.x86_64.rpm
- libstdc++-devel-3.4.6-3.i386.rpm (32-bit)
- libstdc++-devel-3.4.6-3.x86_64.rpm
- libgcc-3.4.6-3.i386.rpm (32-bit)
- libgcc-3.4.6-3.x86_64.rpm
- make-3.80-6.EL4.x86_64.rpm
- pdksh-5.2.14-30.3.x86_64.rpm
- setarch-1.6-1.x86_64.rpm
- sysstat-5.0.5-11.rhel4.x86_64.rpm
- xscreensaver-4.18-5.rhel4.11.x86_64.rpm
- openmotif21-2.1.30-11.RHEL4.6.i386.rpm**
- libaio-0.3.105-2.x86_64.rpm
- libaio-0.3.105-2.i386.rpm (32-bit)
- libaio-devel-0.3.105-2.x86_64.rpm
Software Requirements
- ar
- gcc
- g++
- ksh
- ld
- linux32
- make
- X Display Server
Verifying Host Names
1) Verify that the /etc/hosts file is formatted as follows:
127.0.0.1 localhost.localdomain localhost
<ip_address> <node_name>.<domain_name> <node_name>
2) Verify that the /etc/sysconfig/network file is formatted as follows:
HOSTNAME=<node_name>.<domain_name>
3) If the /etc/sysconfig/networking/profiles/default/network file exists, remove it.
4) If you changed any files in the previous steps, restart the system.
Modifying the Number of Open File Descriptors
Open the /etc/security/limits.conf file and change the existing values for "hard" and "soft" parameters as follows. Restart the system after making changes (If the current value for any parameter is higher than the value listed in this document, then do not change the value of that parameter):
* hard nofile 65535
* soft nofile 4096
* hard nproc 16384
* soft nproc 2047 -
10g RHEL5.2 error when installing - need help
Newbie to the forum; am trying to install 10g on RHEL 5.2 X86_64 and get 65% through the install and encounter errors related to makefiles. I do have all the prerequisite RPM packages installed per the manual. Here is the error:"error invoking target 'ntcontab.o' of makefile "$ORACLE_PATH......../db1/network/lib/ins_net.client.mk Any help is appreciated
Hi,
Also Please check whether all the packages given below are installed.
The following packages are not part of the OS distribution media and must be downloaded separately
(from http://oss.oracle.com/projects/compat-oracle/files/Enterprise_Linux/ for both Oracle Linux 5 and RHEL 5)
and installed manually:
openmotif21-2.1.30-11.EL5.i386
xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386
binutils-2.17.50.0.6-6.0.1.x86_64
The following packages must be installed from the Oracle Linux 5 or RHEL 5 distribution media:
gcc-4.1.2-14.el5.x86_64
gcc-c++-4.1.2-14.el5.x86_64
glibc-2.5-18.i686 (32-bit)
glibc-2.5-18.x86_64
glibc-common-2.5-18.x86_64
glibc-devel-2.5-18.i386 (32-bit)
glibc-devel-2.5-18.x86_64
libgcc-4.1.2-14.el5.i386
libgcc-4.1.2-14.el5.x86_64
libstdc++-devel-4.1.2-14.el5.i386
libstdc++-devel-4.1.2-14.el5.x86_64
libstdc++-4.1.2-14.el5.i386
libstdc++-4.1.2-14.el5.x86_64
make-3.81-1.1.x86_64
gdbm-1.8.0-26.2.1.i386
gdbm-1.8.0-26.2.1.x86_64
libXp-1.0.0-8.1.el5.i386
libXp-1.0.0-8.1.el5.x86_64
libaio-0.3.106-3.2.i386
libaio-0.3.106-3.2.x86_64
libgomp-4.1.2-14.el5.x86_64
sysstat-7.0.0-3.el5.x86_64
util-linux-2.13-0.45.el5.x86_64
compat-libstdc++-296-2.96-138.i386
compat-libstdc++-33-3.2.3-61.i386
thanks,
DB
Edited by: DB_Oracle on 16-Dec-2010 08:47
Edited by: DB_Oracle on 16-Dec-2010 08:47
Edited by: DB_Oracle on 16-Dec-2010 08:49 -
Need help on different subjects
Hi,
here is my problem.
I was running servlets on a server under Linux/RedHat - Tomcat ( server with a celeron processor ) .
Now, i'm installing my apps on a new server ( a pentium IV processor ) with the same components from :
- Java J2sdk-1_4_1_03-linux-i586
- jakarta-tomcat-4.1.24-LE-jdk14
- xerces parser 2.5
- JFreeChart 0.9.6
- Jcommon 0.7.2
when calling jFreeChart, I had problems xith "no class def found", problem solved by a -DJava.awt.headless=true in my tomcat catalina.sh file.
Now, the error is :
----- Root Cause -----
java.lang.UnsatisfiedLinkError: /usr/java/j2sdk1.4.1_03/jre/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1473)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1389)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:832)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1401)
at java.awt.Toolkit.<clinit>(Toolkit.java:1422)
at java.awt.Font.<clinit>(Font.java:136)
at com.jrefinery.chart.axis.AxisConstants.<clinit>(Unknown Source)
I really don't know how to solve this problem .
Could you help ?Someone told me that I needed the library XFree86-libs-4.3.0-2.90.43.i386 to be installed. I'll try to do it (I don't know exactly how to do it, but I'll try).
I have another problem, always with this new configuration :
The new Color( int, int, int ) replies by an java.lang.NoClassDefFoundError
Have any idea ? -
Apple Mini DVI to Video Adapter
i have this already,but do i need a certain cable to go into the TV. as it only has one port instead of the usual 3 av leads have???
help please,confused...............Look in your question and you'll find the answer...
Apple mini DVI to Video Adapter
...the usual 3 av (audio/video) leads...
DVI is video only so you only need one port... if you were hooking up audio and video you'd need three (1 for video - 2 for the left/right audio channels)
Maybe you are looking for
-
This error message occurred after I lost all of my bookmarks and history. I followed the instructions to rename the file and restart Firefox. When I did, the message appeared, and it has not gone away. I've even tried re-installing Firefox and it sti
-
Can I keep my iTunes library solely on an external drive?
I have the macbook air with 128gig HD. I currently have a Windows laptop with a bigger HD housing my itunes network with all of my music and digital copies of movies. I've been using this computer as my primary laptop since I bought it (love it too m
-
Address parameters in the signature definitions (4.1)
Is there any way to change the action triggered by the signature based upon the network/host source/destination address in all kinds of engines? In Atomic engine it is possible - for example triggering different levels of alarms, based upon the victi
-
Transport Monitor problem concerning Treo 680 and MacBook
When uninstalling Palm software from a MacBook, some people have found it impossible to reinstall Palm software successfully again. They also have a problem synching and a message that flashes up about a "Transport Monitor." May I ask someone who has
-
IBook say's it's connected to internet but it isn't...
Hi everyone, I've been using an old iBook running os 9.2.1 and it is able to connect to every other wireless internet but the one in my house! I'm using DSL with a 2wire 2700HG-d router and the thing is, it used to connect fine until we had to reinst