LibXp.so.6 is needed

Howdy kids. I bought a Fedora book and now installing paclages isnt so intimidating. :-) Anyways, Im installing 9i using the instructions for 10g on Fedora3 at:
http://www.puschitz.com/InstallingOracle10g.shtml#InstallingOracle10g
So, I try to run the article command:
su - root
rpm -Uvh openmotif-2.2.3-6.i386.rpm xorg-x11-deprecated-libs-6.8.1-12.i386.rpm
and get the message:
error: Failed dependencies:
libXp.so.6 is needed by openmotif-2.2.3-6.i386
Ive looked on the cd's for this libXp.so.6 and cant find it anywhere. How do I ontain such an animal? I looked @ the Fedora sight and came up short. Sorry if this isnt the right forum to ask this type of question.
TIA, ChrisR

I can't answer your question (it seems, you have a problem with your openmotif environment, that is an OS issue) , but here's another URL, how to install Oracle 10g (unfortunately not 9i) on Fedora:
http://www.oracle-base.com/articles/10g/OracleDB10gInstallationOnFedora3.php

Similar Messages

LibXp.so.6 is needed by openmotif21-2.1.30

I have Red Hat 5 64 bits.
I need install openmotif21-2.1.30-11.EL5.i386.rpm
[root@srvrcotest rpms_gcl]# rpm -ivh openmotif21-2.1.30-11.EL5.i386.rpm
error: Failed dependencies:
libXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386
[root@srvrcotest lib]# rpm -qa | grep libXpm*
libXpm-3.5.5-3
libXpm-devel-3.5.5-3
libXpm-3.5.5-3
libXp-1.0.0-8.1.el5
Regards,
Guido

I hope you are not looking for the CDE motif based desktop, like what is still used on some commercial platforms. Are you? If yes, you might find openmotif resourceful. In short CDE (dtwm) has since been phased out in favour of GNOME about 10 years ago and is no longer available, not for free. Openmotif is not CDE.
Anyway, the packages that provides libXp.so.6 are libXp-1.0.0-8.1.el5.i386 (32bit) and libXp-1.0.0-8.1.el5.x86_64 (64bit)
Do you have valid subscription to Red Hat? If yes then you can use the up2date utility to install openmotif and resolve the dependencies issue. Btw, if you were using Oracle Linux, you could configure free access to the public Oracle software repository and simply type "yum install openmotif" to install all the stuff.

LibXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386

Hi ,
can anyone help me to install "openmotif21-2.1.30-11.EL5.i386"
i received this error when i run the rpm file..
[root@bladj ~]# rpm -ivh openmotif21-2.1.30-11.EL5.i386.rpm
error: Failed dependencies:
libXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386
how to install this rpm? help please...
Thanks BJCDR

Here is one way of determining what RPM a file is part of if you have a machine to compare it against:
1) First locate the file that you are having a problem with.
[root@rac1 ~]# locate libXp.so.6
/usr/X11R6/lib/libXp.so.6
/usr/X11R6/lib/libXp.so.6.2
2) Second, query the RPM database with the file located in step 1.
[root@rac1 ~]# rpm -qf /usr/X11R6/lib/libXp.so.6
xorg-x11-deprecated-libs-6.8.2-1.EL.33.0.1
Hope this helps,
Brian

The following packages were added to your selection to satisfy dependencies

I'm going to install Oracle R12 and a few other things. I've applied all the required linux packages by hand previously and wanted to try the ULN to use the oracle validate package. I bought a network subscriiption, registered my server after installing OEL 5.5. It's a Dell R410.
Using the oracle_validate package does not apply all the dependent packages. What am I missing or doing wrong? I get the message I am missing dependencies no matter what I do. I thought that was the entire point of the packge to not have to apply all these packages by hand.
[root@vicr410 sysconfig]# up2date nox show-channels
el5_x86_64_addons
el5_x86_64_latest
el5_u5_x86_64_patch
ol5_x86_64_latest
el5_x86_64_oracle
I tried: up2date --install oracle-validated to install the required database packages. The resulting message is "The following packages were added to your selection to satisfy dependencies".
Testing package set / solving RPM inter-dependencies...
There was a package dependency problem. The message was:
Unresolvable chain of dependencies:
glibc-headers 2.5-49.el5_5.7 requires kernel-headers
glibc-headers-2.5-49.el5_5.7 requires kernel-headers >= 2.2.1
oracle-validated 1.1.0-6.el5 requires kernel-headers
The following packages were added to your selection to satisfy dependencies:
Package Required by
elfutils-libelf-devel-0.137-3.el5.x86_64oracle-validated-1.1.0-6.el5 elfutils-libelf-devel
gcc-4.1.2-48.el5.x86_64 oracle-validated-1.1.0-6.el5 gcc
gcc-c++-4.1.2-48.el5.x86_64 oracle-validated-1.1.0-6.el5 gcc-c++
gdb-7.0.1-23.el5_5.2.x86_64 oracle-validated-1.1.0-6.el5 gdb
glibc-devel-2.5-49.el5_5.7.i386 oracle-validated-1.1.0-6.el5 /usr/lib/libc.so
glibc-devel-2.5-49.el5_5.7.x86_64 oracle-validated-1.1.0-6.el5 /usr/lib/libc.so
glibc-devel-2.5-49.el5_5.7.x86_64 oracle-validated-1.1.0-6.el5 /usr/lib64/libc.so
glibc-headers-2.5-49.el5_5.7.x86_64 oracle-validated-1.1.0-6.el5 glibc-headers
libaio-devel-0.3.106-5.x86_64 oracle-validated-1.1.0-6.el5 libaio-devel
libgomp-4.4.0-6.el5.x86_64 gcc-4.1.2-48.el5 libgomp
sysstat-7.0.2-3.el5_5.1.x86_64 oracle-validated-1.1.0-6.el5 sysstat
unixODBC-devel-2.2.11-7.1.x86_64 oracle-validated-1.1.0-6.el5 unixODBC-devel
I tried to add the rpm oracle-validated-1.0.0-22.el5.x86_64.rpm using
rpm -ivh oracle-validated-1.0.0-22.el5.x86_64.rpm.
[root@vicr410 Server]# rpm -ivh oracle-validated-1.0.0-22.el5.x86_64.rpm
error: Failed dependencies:
/usr/lib/gcc/x86_64-redhat-linux/4.1.1/libstdc++.a is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libaio.so is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libc.so is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libodbc.so.1 is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libodbccr.so is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib64/libc.so is needed by oracle-validated-1.0.0-22.el5.x86_64
compat-gcc-34 is needed by oracle-validated-1.0.0-22.el5.x86_64
compat-gcc-34-c++ is needed by oracle-validated-1.0.0-22.el5.x86_64
elfutils-libelf-devel is needed by oracle-validated-1.0.0-22.el5.x86_64
gcc is needed by oracle-validated-1.0.0-22.el5.x86_64
gcc-c++ is needed by oracle-validated-1.0.0-22.el5.x86_64
gdb is needed by oracle-validated-1.0.0-22.el5.x86_64
glibc-headers is needed by oracle-validated-1.0.0-22.el5.x86_64
kernel-headers is needed by oracle-validated-1.0.0-22.el5.x86_64
libXp.so.6 is needed by oracle-validated-1.0.0-22.el5.x86_64
libaio-devel is needed by oracle-validated-1.0.0-22.el5.x86_64
libdb-4.2.so()(64bit) is needed by oracle-validated-1.0.0-22.el5.x86_64
libodbc.so.1()(64bit) is needed by oracle-validated-1.0.0-22.el5.x86_64
sysstat is needed by oracle-validated-1.0.0-22.el5.x86_64
unixODBC-devel is needed by oracle-validated-1.0.0-22.el5.x86_64

Cool. That worked. All the missing packages were installed
[root@vicr410 ~]# up2date nox show-channels
el5_ia64_latest
el5_i386_latest
[root@vicr410 ~]# up2date --install oracle-validated
Fetching Obsoletes list for channel: el5_ia64_latest...
Fetching Obsoletes list for channel: el5_i386_latest...
Fetching rpm headers...
Name Version Rel
oracle-validated 1.0.0 24.el5 i386
Testing package set / solving RPM inter-dependencies...
compat-db-4.2.52-5.1.i386.r ########################## Done.
compat-gcc-34-3.4.6-4.i386. ########################## Done.
compat-gcc-34-c++-3.4.6-4.i ########################## Done.
elfutils-libelf-0.137-3.el5 ########################## Done.
elfutils-libelf-devel-0.137 ########################## Done.
elfutils-libelf-devel-stati ########################## Done.
gcc-4.1.2-48.el5.i386.rpm: ########################## Done.
gcc-4.1.2-48.el5.i386.rpm: ########################## Done.
gcc-4.1.2-48.el5.i386.rpm: ########################## Done.
gcc-c++-4.1.2-48.el5.i386.r ########################## Done.
gdb-7.0.1-23.el5_5.2.i386.r ########################## Done.
glibc-devel-2.5-49.el5_5.7. ########################## Done.
glibc-headers-2.5-49.el5_5. ########################## Done.
libXp-1.0.0-8.1.el5.i386.rp ########################## Done.
libaio-devel-0.3.106-5.i386 ########################## Done.
libstdc++-devel-4.1.2-48.el ########################## Done.
oracle-validated-1.0.0-24.e ########################## Done.
sysstat-7.0.2-3.el5_5.1.i38 ########################## Done.
unixODBC-2.2.11-7.1.i386.rp ########################## Done.
unixODBC-devel-2.2.11-7.1.i ########################## Done.
libgomp-4.4.0-6.el5.i386.rp ########################## Done.
Preparing ########################################### [100%]
Installing...
1:unixODBC ########################################### [100%]
2:libgomp ########################################### [100%]
3:sysstat ########################################### [100%]
4:libXp ########################################### [100%]
5:gdb ########################################### [100%]
6:elfutils-libelf ########################################### [100%]
7:compat-db ########################################### [100%]
8:libstdc++-devel ########################################### [100%]
9:glibc-headers ########################################### [100%]
10:glibc-devel ########################################### [100%]
11:unixODBC-devel ########################################### [100%]
12:libaio-devel ########################################### [100%]
13:compat-gcc-34 ########################################### [100%]
14:gcc ########################################### [100%]
15:gcc-c++ ########################################### [100%]
16:compat-gcc-34-c++ ########################################### [100%]
17:elfutils-libelf-devel ########################################### [100%]
18:elfutils-libelf-devel-s########################################### [100%]
19:oracle-validated ########################################### [100%]
The following packages were added to your selection to satisfy dependencies:
Name Version Release
compat-db 4.2.52 5.1
compat-gcc-34 3.4.6 4
compat-gcc-34-c++ 3.4.6 4
elfutils-libelf 0.137 3.el5
elfutils-libelf-devel 0.137 3.el5
elfutils-libelf-devel-static 0.137 3.el5
gcc 4.1.2 48.el5
gcc 4.1.2 48.el5
gcc 4.1.2 48.el5
gcc-c++ 4.1.2 48.el5
gdb 7.0.1 23.el5_5.2
glibc-devel 2.5 49.el5_5.7
glibc-headers 2.5 49.el5_5.7
libXp 1.0.0 8.1.el5
libaio-devel 0.3.106 5
libstdc++-devel 4.1.2 48.el5
sysstat 7.0.2 3.el5_5.1
unixODBC 2.2.11 7.1
unixODBC-devel 2.2.11 7.1
libgomp 4.4.0 6.el5

Install R12.1.3 in OEL6 86x64- Dependencies-install-openmotif21-2.1.30-11.E

Hello All,
I am a newbie. I am trying to install R12.1.3 in OEL6. In metalink note: 761566.1. One of the pre-reqs are openmotif21-2.1.30-11.EL6.i686. my machine is 86x64.
I have installed OEL6 on 86x64 machine. when i try to install openmotif21. This has few dependencies but not able to find them.
can you guys please help me.
Thanks
Muthu
[root@amk tmp]# rpm -i openmotif21-2.1.30-11.EL6.i686.rpm
error: Failed dependencies:
     libICE.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libSM.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libX11.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libXext.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libXp.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libXt.so.6 is needed by openmotif21-2.1.30-11.EL6.i686

Hello Hussein ,
I installed OEL x64. in the initial message you had given me a note which asked me to install oracle as a workstation where all the default RPMs are installed. When I did so . I did not find the openmotif21-2.1.30-11.EL6.i686.rpm. so Downloaded from the oracle site . when I install that, below is the message I get. can you please help me.
Shud I install the Linux with some other option, please help me. I am either not understanding the note you have suggested or something is wrong with the version.
Thanks a lot for the help.
Muthu
[root@amk Downloads]# rpm -i openmotif21-2.1.30-11.EL6.i686.rpm
error: Failed dependencies:
     libICE.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libSM.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libX11.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libXext.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libXp.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libXt.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libc.so.6 is needed by openmotif21-2.1.30-11.EL6.i686
     libc.so.6(GLIBC_2.0) is needed by openmotif21-2.1.30-11.EL6.i686
     libc.so.6(GLIBC_2.1) is needed by openmotif21-2.1.30-11.EL6.i686
     libc.so.6(GLIBC_2.1.3) is needed by openmotif21-2.1.30-11.EL6.i686
     libc.so.6(GLIBC_2.2) is needed by openmotif21-2.1.30-11.EL6.i686
     libc.so.6(GLIBC_2.3) is needed by openmotif21-2.1.30-11.EL6.i686
     libc.so.6(GLIBC_2.3.4) is needed by openmotif21-2.1.30-11.EL6.i686

Try to install openmotif21-2.1.30-11.EL5.i386.rpm dte eroor

when try to install openmotif21-2.1.30-11.EL5.i386.rpm get this error
[root@EBSS rpm]# rpm -ivh openmotif21-2.1.30-11.EL5.i386.rpm
error: Failed dependencies:
libXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386
and i don't have Linux unbreakable account to install libXp.so.6
is there any work around and must have unbreakable to intsall it ?

Micel 811 wrote:
when try to install openmotif21-2.1.30-11.EL5.i386.rpm get this error
[root@EBSS rpm]# rpm -ivh openmotif21-2.1.30-11.EL5.i386.rpm
error: Failed dependencies:
libXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386
and i don't have Linux unbreakable account to install libXp.so.6
is there any work around and must have unbreakable to intsall it ?You can download libXp.<version>.i386.rpm from http://rpm.pbone.net/index.php3?stat=3&search=libXp&srodzaj=3
Thanks,
Hussein

Try to update to 2.1 - Phone stops

Just trying to update my iPhone from 2.0.2 to 2.1 Suddenly the apple-logo appears on my screen. iTunes gives the following notification: The phone cannot be restored due to an unknown error (2005).
I tried it a few times, but no results.
I've used the ports on the back of my G4, but that doesn't help. Does someone have the same problem, en most of all, a solution for it?

Micel 811 wrote:
when try to install openmotif21-2.1.30-11.EL5.i386.rpm get this error
[root@EBSS rpm]# rpm -ivh openmotif21-2.1.30-11.EL5.i386.rpm
error: Failed dependencies:
libXp.so.6 is needed by openmotif21-2.1.30-11.EL5.i386
and i don't have Linux unbreakable account to install libXp.so.6
is there any work around and must have unbreakable to intsall it ?You can download libXp.<version>.i386.rpm from http://rpm.pbone.net/index.php3?stat=3&search=libXp&srodzaj=3
Thanks,
Hussein

Arch64: really need to get Citrix ICA client 10 working (and others)

Hi,
I am currently running Arch64 Voodoo on my Dell M65 notebook. It is a really great and fast distro and I am trying to make it my default distribution ....... however for my work I absolutely Must use the citrix ICA client (v10).
Unfortunately it won't install, it gives me a wrong ELF class on libxaw.so.7
I looked around in the community llib32 stuff, but it doesn't appear to be there, can anyone help me getting ICA working, I really need this and It would suck having to switch to another distro or the 686 version. There isn't a source version from ICA available so I cannot compile it myself.
On a side note I also have a minor java problem, I want to install azureus but that has a dependency to jre6 and I want to install OpenOffice.org but that has a dependency fo java-cgj-compat, does anyone have a olution for this? I already downloaded SUN's jre from their site but ofcourse the package azureus doesn't know this.
thanks a lot in advance,
stefan

I haven't heard of these emul32 packages before, but I think what you need are the proper lib32 packages. Specifically one for libxaw. Unfortunately, one isn't available in the AUR. I took a look at some of the other lib32 PKGBUILDs and all they seem to do is download the i686 package for the corresponding library, uncompress it, and copy all the shared object files to /opt/lib32/usr/lib. With all that said, here is a PKGBUILD for lib32-libxaw.
I won't be adding this to the AUR because I don't use it & therefore don't want to maintain it, but anyone else may submit it if they choose.
Looks like this library should depend on libxmu, libxpm and libxp. The first is available in the community repo as lib32-libxmu. The other two can be downloaded from the AUR as lib32-libxpm and lib32-libxp.
_pkgsourcename=libxaw
pkgname=lib32-$_pkgsourcename
pkgver=1.0.4
pkgrel=1
pkgdesc="X11 Athena Widget library"
url="http://xorg.freedesktop.org/"
arch=('x86_64')
groups=('lib32')
depends=('lib32-libxmu' 'lib32-libxpm' 'lib32-libxp')
source=(ftp://ftp.archlinux.org/extra/os/i686/$_pkgsourcename-$pkgver-$pkgrel.pkg.tar.gz)
md5sums=('5dd7b928b96b72e4d31bd29c957b7fc5')
build() {
cd $startdir/src
mkdir -p $startdir/pkg/opt/lib32/usr/lib
cp -dp usr/lib/*.so* $startdir/pkg/opt/lib32/usr/lib

Problem installing LibXp package

Hello,
I have a problem when i try to install oracle 10g2 when i get an error message. I read this forum which btw has lots of stuffs for studying since i am new to linux :) and i found out that i need to install the libXp package. My problem is that i cant install this package since when i open it it says that it cannot install source packages and i when i run it from the terminal i get this message:
cannot create %sourcedir /usr/src/redhat/SOURCES
I tried to check other topics in case i find something similar but there were too many and i got tired. If you can specify me a guide for how to unpack those files it would be appreciated. I am running Red hat enterprise Linux 5.
Thanx in advance for your help

Sorry if this is getting tiring but i used the first method i and i got the result you can see in the picture below.
http://s236.photobucket.com/albums/ff93/mstavra/?action=view¤t=1.jpg
I read somewhere that those warnings are no need to be taken into consideration.However, i cant find the package in the installed packages of my system and when i try to install oracle i get exactly the same error as before:
"libxp.so.6: cannot open shared object file"
Concerning the pirut, i dont think i can use it since it says: "Unable to import modules. Maybe you are not running under X?"
Now i am trying the third method. I hope that this will fix it
*EDIT: I might be wrong for the pirut. I forgot i was not as root when i tried that. I opened now the package with opening with other application --> use a custom command. There i typed pirut and it opened me a window with all the installed packages. I am stuck there atm and trying to figure it out :)

Need help on different subjects

Hi,
here is my problem.
I was running servlets on a server under Linux/RedHat - Tomcat ( server with a celeron processor ) .
Now, i'm installing my apps on a new server ( a pentium IV processor ) with the same components from :
- Java J2sdk-1_4_1_03-linux-i586
- jakarta-tomcat-4.1.24-LE-jdk14
- xerces parser 2.5
- JFreeChart 0.9.6
- Jcommon 0.7.2
when calling jFreeChart, I had problems xith "no class def found", problem solved by a -DJava.awt.headless=true in my tomcat catalina.sh file.
Now, the error is :
----- Root Cause -----
java.lang.UnsatisfiedLinkError: /usr/java/j2sdk1.4.1_03/jre/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1473)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1389)
     at java.lang.Runtime.loadLibrary0(Runtime.java:788)
     at java.lang.System.loadLibrary(System.java:832)
     at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Toolkit.loadLibraries(Toolkit.java:1401)
     at java.awt.Toolkit.<clinit>(Toolkit.java:1422)
     at java.awt.Font.<clinit>(Font.java:136)
     at com.jrefinery.chart.axis.AxisConstants.<clinit>(Unknown Source)
I really don't know how to solve this problem .
Could you help ?

Someone told me that I needed the library XFree86-libs-4.3.0-2.90.43.i386 to be installed. I'll try to do it (I don't know exactly how to do it, but I'll try).
I have another problem, always with this new configuration :
The new Color( int, int, int ) replies by an java.lang.NoClassDefFoundError
Have any idea ?

Apple Mini DVI to Video Adapter - do you need cables as well?????????????

Apple Mini DVI to Video Adapter
i have this already,but do i need a certain cable to go into the TV. as it only has one port instead of the usual 3 av leads have???
help please,confused...............

Look in your question and you'll find the answer...
Apple mini DVI to Video Adapter
...the usual 3 av (audio/video) leads...
DVI is video only so you only need one port... if you were hooking up audio and video you'd need three (1 for video - 2 for the left/right audio channels)

I need to upgrade my external hard drive, any suggestions

I have an iMac i5 quad core (2010 model), I have been using a Seagate Barracuda 250 GB 7200 RPM from an older iMac 20" G5 in an OWC Mercury Elite Pro Firewire 400/USB 2.0/1.1 enclosure as my backup external HD. The enclosure has the Oxford 911 chipset and says that it supports up to 750GB.
Since I have been using Snow Leopard only I have used time machine to backup to this HD. Now, that I have installed Lion, and partitioned my HD on my computer to have both Lion and Snow Leopard OS, I need to get a larger external HD to install in my OWC enclosure to save money.
I was looking on the OWC website and found a SeaGate 2.0TB Barracuda Green SATA 6Gb/s 64MB, 5900 RPM for $90.00, or the 7200 RPM for $158.00.
I am not sure if my enclosure with the Oxford 911 chipset will support this drive, and also the specs for my enclosure says up to 750GB, and that probably rules out these drives anyway.
I could just keep what I have and use it as a back up of my Lion partition currently using 134 GB. Snow Leopard using 127 GB on my internal 1TB hard drive. Then, I could purchase the OWC Mercury Elite Pro 2.0 TB Firewire 400/USB 2.0/1.1 with the Oxford 934 chipset, 5900 RPM, and 64 MB for $150.00. Even thought this would be a little slower, is it worth paying $40.00 more for the 7200 RPM speed?
On my hard drive now I am only using 261 GB, so after I first back up both partitions on the 2.0 TB external HD, any other backups would not take as long to do. I have Super Duper, but right now it is not recognizing my Lion HD, and I have not backed up Lion to my current external HD yet since I want to get a larger external HD. When I get the new HD, I can partition it so that I can backup either Lion partition or SL partition using time machine, it that right? My current external HD is bootable, but I am confused about Carbon Copy or Super Duper, will that be saved on my external HD?
Thanks,
DaisyMay

DaisyMay wrote:
Firewire 400/USB 2.0/1.1
I would recommend not settling for less then USB 3 or hold out for Thunderbolt, if your machine is capable. Firewire 800 minimum.
MacBook Pro, Mac OS X (10.7), 2.4GHz IntelCore i5 320 HD 8GB RAM ParallelsDesktop6.0

How large of a hard drive can I install on dual G5, and do I need more RAM?

I recently had a situation in which my dual-processor 2.0 G5 was completely refurbished by Apple repair-new logic board, both processors, video card, thermistor, all new. Finally it has been working well after a month of trips back and forth from the Apple store. I have two internal hard drives installed on my G5, both 300GB, one for OS applications, and one for audio. I am running out of space on my main hard drive, and so I recently purchased a Maxtor 1TB hard drive, now manufactured by Seagate, from Fry's. After having my G5 refurbished, I was having an issue with my Samsung 930B monitor going into sleep mode when I boot-up from a CD, but other than that G5 was working fine. I removed the main 300GB hard drive from slot #1 and put it into slot #2, from which I had removed my audio hard drive. I installed the Maxtor drive in slot #1 and reformatted it for Mac using my laptop with ATA/USB cables previously purchased for data transfer. This took about 14 hours as I used the "zeros" option. After that I hooked up the internal cables to both drives and tried to boot up from Leopard in order to install it on the Maxtor drive, but again my monitor went into to sleep mode. We went to the Apple store to try to see if there was an issue with the computer, but everything worked fine with their monitors and CD's, as well as my CD. So there is some kind of issue with my monitor, probably software as it works fine when booting up from the main hard drive, and also was fine when I did its self-test function. While at the Apple store, they installed Leopard from their hard drive which took about 30 minutes.
My problem is this: When I arrived home, I turned on my G5, which had been set to boot from my new Maxtor drive and complete the Leopard setup process, which we had decided to do at home as it would have taken another 20 minutes in the Apple store. The G5 turned on, chimed, I got the Apple screen with the wheel, but then after that my monitor goes into sleep mode. I can hear Leopard's setup intro playing through the speakers, but the screen is in sleep mode. So I reboot holding down the option key so I can boot up from my old (300GB) main hard drive, now in slot #2. This works and the monitor screen does not go to sleep. However, as I am browsing on the web to check for issues concerning this monitor, the G5 freezes, and I get a screen with black bars with writing in them and various technical language across the screen. This happened several times after rebooting. Finally I shut the computer down. I am going to try removing the new hard drive and putting both old ones back in and see if the G5 stops crashing. I think the monitor issue is a separate issue, and I am more concerned with the crashing, as previous to the new hard drive installation the G5 was working fine, monitor fine, other than the issue when booting up from a CD. Do I need more memory? Is the 1TB hard drive too large for my dual-processor 2.0 G5 and overloading it? Would I be better off with a 500GB drive? Would appreciate advice from persons with experience in this area. Thank you.

I have replaced my 5 year old G5 with a Mac Pro, as the G5 just had too many issues, even after replacing all major components (logic board, both processors, video card, etc.) Once I took out the 1 TB hard drive from my old G5, it stopped having the kernel panic issue. Nonetheless I had been through a lengthy repair process previous to this issue, so I didn't care to trust an older machine any longer, especially since being told by an Apple tech that the "new" parts were really just older parts stockpiled from a central location. Could be new, could be refurbished. Apple was kind enough to credit the money we had spent on the G5 repairs towards the purchase of my Mac Pro.

Stuck: Need Disk repair but DVD drive dead and only have USB 1

[1 Ghz flat-panel iMac with USB 1 ports (no USB 2) and also Firewire 400]
I noticed a strange discrepancy (small but concerning) between the size of a folder on hard drive (folder of all mp3's with no subfolders) and the backup of the same folder on a mounted thumb drive.
(The size difference was not due to any invisible .DS_Store files and both folders are displayed in List view format.)
Disk Utility reports three things:
1. Incorrect number of thread records
2. Volume Bit Map needs minor repair
3. Checking volume information.
Volume free block count",0) [I might have mangled this line]
(It should be 13438611 instead of 13437937)
Here is the GOOD (but these are useless as explained under the "Bad"):
- I have a Tiger 10.4 boot DVD for a repair ==>but see below
- I also have a Disk Warrior disk (never used)
Here is the BAD:
- My built-in optical drive [Pioneer DVD-RW DVR-105] is -- I now discover - defunct and DEAD - it does not run the Tiger Boot DVD (in pristine shape).
- I bought an external SuperDrive (unopened) but I believe no boot from USB 1 is possible in PowerPC so a SuperDrive with USB 1 is useless.
Questions:
1.) Is there any way to boot from some external source (optical drive is DEAD) to run Disk Utility and/or Disk Warrior? -- I see none in this case! (gulp).
2.) More importantly (and this is my fundamental concern): Do the three Disk Utility hard drive issues constitute any direct threat to the integrity of my files?
I have almost everything backed up to duplicate thumb drives over these many months as standard practice.
Are these Disk Utility errors fully isolated to hard drive directory-keeping...or do these directory damage errors pose the possibility of mangling or harming my files or their metadata (filesize, etc.).
Put another way, when files are backed-up from a hard drive under the Disk Utility reports above, do they remain unharmed and undamaged by the situations reported by Disk Utility?
Thanks,
Bill

Jeff and Michael,
Thank you both for your generous and thoughtful input.
Michael: As I slept on it overnight, the exact same idea occurred to me of trying a Target Mode to the iMac from my Lion MacbookPro (I have it but stupidly have yet to use it much!).
I did buy a Firewire 800 (MBP) to Firewire 400 (iMac) adapter cable a few months ago!
CONCERN: Would there be potential compatibility issues or risks in running Lion 10.7's Disk Utility against the hard drive of the old OSX 10.4 iMac in Target Disk Mode?
==> Assuming an "it's ok" answer to the Target Disk question, would the majority of users agree that the Target Disk Mode would be more prudent than running:
fsck -fy in Single User Mode
I have never done fsck -fy before especially because I was under the impression there were issues with Journaled drived but from what I have read today...it looks ok to do)
Jeff: Can't thank you enough for the reference to the OTW DVD drive. I might first invest $10 in one of those DVD lens cleaner disks that I've read about. It's probably not the issue or else why would the drive read commercial Music cds perfectly well!
Thanks,
Bilil

Dear experts help needed in creation of report in hr

Please check the below code.
There is one Transaction code PA20 from these i need the fields in my report.
I tried writing the report but the fields are from structure so please help in creating the report.
I am a beginner so i donno how to find the below fields are coming from which table.
when i do F1 on the fields in PA20 i found the fields but they are from structure.
type-POOLS: SLIS.
TYPES : BEGIN OF TY_P0001,
        PERNR TYPE PERNR_D,      "Personnel Number
        BEGDA TYPE BEGDA,        "Start Date
        BUKRS TYPE BUKRS,        "Company Code
        ENAME TYPE EMNAM,        "Formatted Name of Employee or Applicant
        END OF TY_P0001.
TYPES : BEGIN OF TY_P0016,
        PERNR TYPE PERNR_D,      "Personnel Number
        PRBZT TYPE PRBZT,        "Probationary Period
        CTTYP TYPE CTTYP,        "Contract Type
        END OF TY_P0016.
TYPES: BEGIN OF TY_P9210,
         PERNR TYPE PERNR_D,
        ZTICKET_AMT TYPE ZTICKET_AMT, "Ticket Amount
        END OF TY_P9210.
TYPES : BEGIN OF TY_OUTPUT,
         PERNR TYPE PERNR_D,      "Personnel Number
         BEGDA TYPE BEGDA,        "Start Date
         BUKRS TYPE BUKRS,        "Company Code
         ENAME TYPE EMNAM,        "Formatted Name of Employee or Applicant
         PRBZT TYPE PRBZT,        "Probationary Period
         CTTYP TYPE CTTYP,        "Contract Type
         ZTICKET_AMT TYPE ZTICKET_AMT, "Ticket Amount
        END OF TY_OUTPUT.
DATA: T_P0001 TYPE TY_P0001 OCCURS 1,
       W_P0001 TYPE TY_P0001,
       T_P0016 TYPE TY_P0016 OCCURS 1,
       W_P0016 TYPE TY_P0016,
       T_P9210 TYPE TY_P9210 OCCURS 1,
       W_P9210 TYPE TY_P9210,
       T_OUTPUT TYPE TY_OUTPUT OCCURS 1,
       W_OUTPUT TYPE TY_OUTPUT.
    START-OF-SELECTION.
        SELECT PERNR
               BEGDA
               BUKRS
               ENAME FROM P0001 INTO TABLE T_P0001
               WHERE
                AND BUKRS IN S_BUKRS
                AND BEGDA < '31032007'.
          SELECT PERNR
                 PRBZT
                 CTTYP
                 FROM P0016 INTO TABLE T_P0016
                 FOR ALL ENTRIES IN T_P0001
                 WHERE PERNR = T_P0001-PERNR
          SELECT PERNR
                 ZTICKET_AMT
                 FROM P920 INTO TABLE T_P920
                 FOR ALL ENTRIES IN T_P920
                 WHERE PERNR = T_P0001-PERNR.

use logical data base PNP.
tables: pernr.
infotypes: 0001, 0016, ....
start-of-selection.
get pernr.
here all tables Pxxxx defined as INFOTYPES are filled for the selected PERNR.

LibXp.so.6 is needed

Similar Messages

Maybe you are looking for