Licence error -2147024891

Hi,
Im marco and i have a problem
I installed a new addons on a client and now i have not possibility to logon in sap.
i try to describe what happened to me.
I installed an italian addons named "cruscotto contabilità3" in a client that log on in a network domain with a restricted user. ( not as administrator )
after when i try to open SBO apper to me the mask for licence server and so i type the ip address for the licence server machine.
then... exit the error... licence server error -2147024891 and the program is not able to connect and logon to SBO.
but if i logon on windows as a Administrator... the sBO work good.
so i tried to see if is changed something on DCOM config but all is correctly registred.
can help me?
in DCOMCNFG i haven't the SBOLICENCE group... is correct?
the strange is that the system this morning works very good...
help me..please
thanks
MArco Solari

Hi Marco,
Have you read the forum about this error?
There is quite a lot of stuff about it.
Which SO is it? Win XP? Is the license server on the same machine? Try adding a user/password to get into the server under Control PanelUser accountsAdvanced optionsManage Passwords
Regards,
Ibai Peñ

Similar Messages

SBO Client and Windows Vista in workgroup Licence error

Hi!
My customer runs B1 2004C. Network structure is workgroup. Client and server are in the same workgroup. XP users connect successfully, but new Vista user gets the licence error: "-2147024891 Access denied". DCOM and other customizations on the licence server are done like in SAP Notes. It doesn't help.
I know Vista is not officially supported by 2004C B1, but i have several Vista users running SBO fine in domain structure. I think the trouble is in the workgroup.
Thanks a lot!
David.

Hi David,
some of the SAP Notes addressing DCOM access denied problem of 2004 releases.
<b>Note 833798 - After Upgrade W2003 to SP1: Access denied -2147024891</b>
Symptom
After upgrading Windows 2003 server to SP1 you get the access denied error -2147024891
Other terms
license server, error -2147024891
Reason and Prerequisites
Upgrade to Windows 2003 server changes security settings
Solution
The problem is caused by SP1 for W2003 Server. You have to change the
default configuration of the DCOM to enable clients to access license
server again:
1. go to "Start/run", type in "Dcomcnfg" and the Dcom configuration will open
2. expand "Component Services"
3. right click on "my computer", open "Properties"
4. go to tab "Com Security"
5. in "launch and activation permission" go to "edit limits" this
button is new since SP1
6. tick the boxes "remote launch" and "remote activation" for user
"everyone"
After that the clients can access the license server again, if all nescessary rights are give in the DCOM as well. When the changes described above did not take effect, please check this additionally:
1. go to "Start/run", type in "Dcomcnfg" and the Dcom configuration will open
2. expand "Component Services"
3. Go to "SBOLicense", open "Properties" by right-clicking the mouse
4. On register tab "Security" customize all permissions. Add all nescessary User accounts there. If you add i.e. User Group "Everyone" there, you will not have access right problems any longer, as every user belongs by default to this group.
If that change does not take effect immediately, reboot the server.
This note is permanently updated. If you have any comments or proposals tho improve it, please contact the SAP Business One Hotline and let us know.
<b>Note 824976 - error -2147024891, access denied to license server</b>
Symptom
error -2147024891 when trying to connect with B1 client to license server on another computer The License mechanism needs a properly set up license server which is available over the network via DCOM interface to client computers. The necessary windows user rights must be assigned to client and server.
Other terms
Access denied, SAP Business One, License server
Reason and Prerequisites
Functionality description
Solution
1. Is the license server up and running?
The B1 client on the license server computer should be started and logged into to ensure that there are no problems withs the license server itself. The B1 Server tools should be opened and the settings of the License Manager should be checked so that it is possible to connect by pressing the Connect button.
2. Is the network connection between client and license server working?
The server should be pinged via its IP-address for a response. Any firewalls should be disabled between client and license server for troubleshooting reasons as they can effectively block data packets which are needed for license mechanism. If a VPN is used between client and license server all ports should be available.
3. Are necessary windows user rights in the domain given?
We highly recommend to use B1 in a windows domain, as this is the only way to manage user accounts effectively. Domain user accounts have to be configured on the domain controller computer only. For troubleshooting reasons log in at the client with the windows domain administrator account, that should prevent the user from being blocked due to a lack windows user rights. According to our recommendations the users should be Power Users on the local computer.
4. Are necessary windows user rights in a workgroup given?
If the user is in a windows workgroup, the same user account should be configured with the same password on the license server and on each client computer as well. For troubleshooting reasons a local admin account should be configured on each of these computers. As account information is stored locally on each computer, username and password must be exactly the same on each of the machines. Login with this local administrator account. According to our recommendations the users should be Power Users on the local computer.
5. Is DCOM installed and configured correctly?
On the license server DCOM interface should to be installed and configured correctly. It is located under Control panel\administrative tools\ component service. Expand and in My Computer you will find DCOM Config\SBO License. Open its Properties and check configurations in Security tab. Add user accounts there, if needed.
DCOM should be enabled on the Client machines and on the server(s). In the Component Services expand to My Computer and right click to open the Properties for My Computer. Go to the Default Properties tab and make sure that 'Enable Distributed COM on this computer' is ticked. If these settings are modifed a restart of the computer is needed for the changes to take effect.
Br,
Chris

Licence error : verification of members outside domain

Hi everybody,
We have an error on our server Windows Server 2012 R2 Essential.
Title : Licence error : verification of members outside domain.
Description : Thefield outsidemembers of the auditstrategyin
your environmenthas detecteda condition thatdoes not complylicensestrategy.This
servercan only bein aworkgroup ora domain controller.
Resolution :
Make sure the server is in a
workgroup or a domain
is Controller.
Our client has finally insert the server in a domain but the problem is not solved.
Do you know if this requires a
purchase of a license extension ?
The other question is that their
server (this server runs a company of 100
people!) stopped the last weekend,
and it seems that it is due to this ...
Do you know if this can happen?
Thanks a lot for your help!

To tell you the truth, I am not sure of the answer if you have Server 2012R2 Essentials. The software that costs around $400 US. Though I think that must be what you have.
The error you show above is saying you have not run the essentials configuration wizard which I said should have been run on day 1. It must be a Domain Controller or join a Domain. So you could rebuild the box as a DC and have two DC's on
your network which would be no help at all.
What I don't know for sure is if you join it to your domain and then run the Post Deployment wizard if it will complain you have more than 25 users. I will try sometime over the weekend and see. But I am pretty sure it will list your Domain Users
as users because it is joined to the Domain and you have too many users.
If you had Server 2012R2 Standard and enabled the Essentials role you would not have a limit on the number of users.
Why did you build this box? What are you trying to accomplish?
Grey

License Error: -2147024891 Access Is Denied.

Hi
Iu2019m having issue with running SAP Business one client on Terminal services Server (windows 2008 server)
SAP Business one version:
2004A (6.70.190) SP: 00 PL:32
License server on the remote Server.
What strange is, it works fine for the administrator but not for domain user.
When domain user trying to log in the error message comes up u201CLicense Error: -2147024891 Access Is Denied.u201D (see attached screenshot)
Do I need to give any additional permissions to DCOM object?
Please help
Gary

Hi to All,
We are upgrading SAP B1 2007B PL 19 to SAP B1 8.8 PL 10, upgrade is done successfully but licenses are not working in SAP B1 8.8 PL 10 earlier we have 6 licenses in SAP B1 2007B. After Upgrade system is giving error message like
YOU CAN'T OPEN WINDOW 40005 CALANDER FROM WITH YOUR CURRENT LICENSE
Please Help me what to do?
Regards,
SRINI

Error -2147024891 (Access is denied)

Dear all,
within a SAP NW installation there comes an error:
Error -2147024891 (Access is denied) in execution of system call ´IADsGroup::SetInfo´ with parameter (), line (1075) ....
I think that the problem is wit OS authorisations but the installation user is a Administrator.
Can anybody help?

> Windows Server
Not very specific
Windows Server 2003 handles user management different to Windows 2008 and Windows 2008 R2.
Please check if you have disabled UAC for the time of installation if it's Windows 2008 (R2).
Markus

Webi licence error

Hello,
Post installation , when i long into infoview and open sample crystal reports they run fine, but when i open webi reports its gives an invalid licence error.
i try to login in the Webi rich client .....i get an error " Cannot perform this operation no valid liecence found(Error:INF)".
i looked in the log files i see the error message there as " webi disabled by lince key"
I do not understand the problem.
any inputs highly appreciated.

close

Could not retrieve iView - Error: - -2147024891

Hi,
We r using EP5.0 and we have some applications runnning on EP5.0 which will call some transactions from a SAP HR system. Everything was working fine till yesterday. Suddenly we are getting the error "Could not retrieve iView - Error: - -2147024891" when we tried to use those iViews today. One of the iView's functionality is like calling the Transaction "PZ01" in SAP(who's who).
Can anybody tell me why this is happening? Thanks in Advance.

Hi
No (usefull) answer from SAP yet. For me it looks like the problem is to be found in the communication between IIS and J2EE (SAPJ2EE) because other web-applications on the IIS and the J2EE are working.
Did anybody install MS Security updates before reboot/the problem occured? We did but the uninstall of this update didn't help. The error code is generated by the IIS (I assume) - you can find this error in the MS KBase (http://support.microsoft.com) too. But it didn't help me a lot
Regards
Nicolaj

Licence error: 100000006 No Licence (addon identifier generator - dev )

before popping this to SAP as a support question I thought of using the forum,
we have the Developer version of SDK and I have it installed on the PC.
I tried (for the first time) to create the Add On Identifier for the use of my new add-on I am writing.
as this is not a real issue yet, I understand that after end of this year I need an add-on identifier, so I was planning to set the addon identifier property with the generated string.)
Administration | License | Add-on identifier generator
then selected "Development" and cliked "Generate" only to get the error below.
"Licence error: 100000006 No License"
what is the problem?
I have upgraded SAP a few times with patches available since the install of the Developer SDK, and I upgraded the SDK that came with them as well, could this have done something to my SDK? If that is so, how do I obtain Developer SDK upgraes?
I tried uninstalling the SDK and re-installing with same result.
Thanks in advance,
Indika.
Message was edited by: Indika Dekumpitiya

Hi Indika,
To know if you have the development license you should have a look to the Administration -> License -> LicenseAdministration menu and then go to the Components folder. There you should have a "Software Development Kit - Development Version" line with the numbers of licenses you have and the start/expiration date. You can also have a look to your license.txt file.
If everything is ok regarding your development license, I think it s if you were able to develop and test your addon using DI and UI API, then you must create a message into SAP support.
Regards
Trinidad.

VCM 5.7.1 - Failure Collecting Event Log Data - "Unknown Error: -2147024891"

When attempting to collect on certain Windows 2003 Servers I'm receiving the error "Unknown Error: -2147024891". The application is utilizing a domain level service account that should have all the necessary administrative permissions. VMware suggested it may be a GPO setting, but my AD team has said it resides in the same organizational unit as other's that work without issue. Has anyone encountered this before?

I'm having the same problem, any ideas or resolutions?
*Edit* Just worked with VMware, turns out our workstation service had stopped. Make sure both the server and workstation services are started as they will cause certain parts of the collection to fail if they aren't.

Licence Error

Hi
    After importing Licence in SAPB1 Pl10 new version , i am getting following error messages
    module < professional user> expired on 20100305>
    module < s.p addons expired on 20100305>
    u are not licenced to open form [ 60215] data ownership exceptions.
    The user has no licence to run Screen Painter
   Also it does not allow to open many other forms like Journal Vouchers , Sale order etc it gives message " u are not licenced to open form.
Thanks

Dear,
Unassign the license and assign it again.
assign the user professional user license and open data ownership form.
the message license will expire are coming because license is generated till that time.
contact your partner regarding the license expiry.
hope this will clear your doubts.
regards,
neetu

Licence Error while Using nqcmd with Analytics Web DSN

Hi,
While running nqcmd with Analytics Web DSN i am getting a DataDirect error, stating that you do not have appropriate licence to run ODBC Data Direct.
I am getting this on Linux box but while running the same on Windows their is no such error.
Have any one of you got such kind of stuff. I am using OBIEE which Oracle provides on her website for free for development purpose.
Please help.
Edited by: RKK on Oct 3, 2011 10:01 PM

Hi,
kindly Refer
https://forums.oracle.com/forums/thread.jspa?messageID=2289534&#2289534
Thanks
Deva

Shared Variable Initial value not licenced error with cRIO

Hello Everyone,
I've a project that will be deploed on cRIO. This project was created on a different machine and didn't have any error regarding the shared variables. when I transfered the project to the computer connected to the cRIO, I have this error with all shared variable. The error message says that:
1. Initial Values: Not Licenced or can't be edited outside of LabVIEW.
2. Logging: Not Licenced or can't be edited outside of LabVIEW.
attached are two images for the error i have.
Can I have help with this issue?
Thanks in advance
Attachments:
1.png ‏134 KB
2.png ‏142 KB

Good day,
Sounds like you are using the DSC module features on your code and you forgot to activate the runtime system on that machine. If you have access to the NI License Manager, please check the status of the license.
We need an active license for the second message but, for the first one you can try to program your own initial values for all of your network-published shared variables by initializing whenever the PC is started. During the initialization portion of your code, you can just write a constant value to the shared variables so the values are the same initial values every time it is run.
Regards,
Alejandro | Academic Program Engineer | National Instruments

Licence error message when using automation software

Error message when using Rational Functional Tester 7.0.1.1
to record a Flex application. The message seemed to come from the
Flex application.
I can record a fiew step in the application, then I have the
message : "Licence are not present. Eith the trial version only
limited record are allowed". But, my license of my Rational
Functional Tester application is activated.
I am using a Flex builder 3 trial version and the trial is
not over.
Is there any problem to get the license in the File compiler
with "D:\apps\IBM\SDP70\FunctionalTester\bin\rft.swc"? That RFT
file is supposed to be included in the flex application once
compile

Does anyone know how to build with automation support in a
linux environment?
We simply run an ant script build and have the SDK installed.
We purchased Flex Builder Professional, but cannot install on Linux
(we don't want to use the alpha version).
Thanks for any pointers :)

CT3 LICENCE ERROR

Dear all,
when i am capture a CT3 Licence with T.code J1ILIC01 with different sold to party and ship to party it was not saved,showing error as Enter valid ship to party/sold to party.even i put zero's before sold to party and ship to party,if i took both sold to party and ship to party are same it will accept, but in my senerio both are different.please help .
Thanks & Regards,
Prasad.

even i put zero's before sold to party and ship to party
Ensure that you input the number of preceding zeros correctly. For example, if preceding zeros should be four and if you input only three, in that case also, system will pop up this error.
G. Lakshmipathi

HELP - Licence Error on 4500x VSS

HI there,
have 2 4500x in vss mode. both are running 3.4.2 ipbase and are running on the correct licences etc.
after putting them in VSS mode the following error shows in the logs.
%SW_LEVEL-6-RESULT: Operational redundancy mode is UNKNOWN, due to software license-level mismatch at ACTIVE and STANDBY. Software Level on Active: ipbase; on Standby: ipbase
Any suggestions would be appreciated.
I thought it maybe related to bug CSCui54147 but cant see any details of it and it only seems to relate to 3.5.x
Thanks in advance.
Ross

Hi Apologies for not getting back.
To fix this I had to manually accept the EULA for ipbase licence on the 4500x.
After the reload everything worked correctly and I stopped getting this error.

Licence error -2147024891

Similar Messages

Maybe you are looking for