Licence file is not being uploaded to NX 9k ?

Trying to upload the licence file to a bootflash: via tftp, but keep getting TFTP get operation failed: connection time out;
Any link/method than normal upload file to Cisco switches ?
Rgds

I'd try them over here.
http://forums.asp.net/1247.aspx/1?Azure+and+ASP+NET
http://forums.asp.net/26.aspx/1?Configuration+and+Deployment
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Email attachments from SSRS email subscription are not being uploaded to an email enabled SharePoint 2013 document library

Email attachments from SSRS email subscription are not being uploaded to an email enabled SharePoint 2013 document library.
I have tested the library using a standard email (with attachment) to the library and this works fine.
I have monitored the drop folder on the server and I can see both emails being picked up in drop and processed by SharePoint. The email sent from a regular email account is uploaded with the attachment, whereas the email sent via SSRS subscription
email is uploaded and the attachment (report) is missing.

An update on this. The email when sending from SSRS subscription is received in the library and the attachment is contained within the .EML file uploaded.
The behaviour that I would like from SSRS subscription emails are to just have the document and not the email.
Below is a snippet of the .EML files I quick copied from the Drop folder.
Email attachment snippet sent from SSRS Subscrption:
----boundary_2477_75fa3d73-56de-4948-ad82-6588f3a35b95
Content-Type: application/octet-stream; name="Toilet Usage by Month.docx"
Content-Transfer-Encoding: base64
Content-Dis;
filename="=?utf-8?B?VG9pbGV0IFVzYWdlIGJ5IE1vbnRoLmRvY3g=?="
Content-ID: <10722c0f-749e-4ecb-ac3f-206317bae734>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 attachment snippet sent from Outlook:
--_004_A4C6DCEDE4346446A79AFF493D278530FB87FA07MELABCDEXA1airp_
Content-Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document;
name="Toilet Usage by Month.docx"
Content-Description: Toilet Usage by Month.docx
Content-Dis; filename="Toilet Usage by Month.docx";
size=76574; creation-date="Thu, 12 Mar 2015 00:41:14 GMT";
modification-date="Thu, 12 Mar 2015 00:41:14 GMT"
Content-Transfer-Encoding: base64
UEsDBBQAAAAIAMJcbEY4Xh4a5nsAAPJtMQARABwAd29yZC9kb2N1bWVudC54bWwgohgAKKAUAAAA
AAAAAAAAAAAAAAAAAAAAAAAA7N1rr1/XcSforyL4VRooR3vd9to76Kihjto9I8T2TDvAzFuaPrE1
kUiCouxWPv38DyX50nHSniCdyS96bIAUL+d/LnxO7Vq11qr6j//pv3/x+Qe/fnr75WevX/3lD9qf
Hz/44OnVy9e/+OzVL//yB1+9+9sfXj/44Mt3L1794sXnr189/eUPvn768gcf/KeP/uNv/uIXr19+
9cXTq3cfPF7h1Zd/8evHH/7q3bs3f/Hhh1++/NXTFy++/PPXb55ePf7wb1+//eLFu8cv3/7ywy9e
vP27r9788OXrL968ePfZzz/7/LN3X3/Yj+P8wbcv8/rxXt+++otvX+KHX3z28u3rL1//7bvnN/mL

Master Data not being uploaded to Info Object

Hi all,
I'm trying to upload some master data in to an Info Object with attributes. When I trigger the DTP, the status gets stuck to Yellow and the data is not being uploaded. There are no errors being shown.
The data has reached PSA perfectly. My data source is a flat file.
Anyone have any ideas?
Please help
Thanks

Hi,
There could be various reasons for this. I would have gone through checking it this way.
Activity set 1:
1) Check in SM50 if there is any activity happening.
2) Check in SM37 for any cancelled jobs.
3) Check in SM21 for error logs.
Activity set 2:
1) Cancel the current request.
2) Ensure my transformation (b/w datasource and InfoObject) is active.
3) Try to reduce the data package size and try (say to 100)
4) Run the DTP
Activity set 3:
1) If Activity set 1 and 2 do not help me, I would check by deleting the request in my PSA as well. Take only one record of the flat file which I am sure has no illegal characters and try loading.
2) If successful, this would mean it could be because of the erroneous record in the complete set (It may be taking some time to show up the error and hence the status is still yellow).
3) If unsuccessful, this could be because of some objects which are inactive. And I would start from deleting and recreating the DTP.
Also, do you have any routines in the transformation? If so please recheck the logic.
Hope it helps!!

HT1349 I am loading pictures in the photo steam photo but they are not being uploaded to the cloud. I have enabled the pictures on the windows PC but how do I "force" the upload?

I am loading pictures in the photo stream folder but theya er not being uploaded to the cloud. How do I "force" the upload from the PC to the cloud? I have followed the instructions and enabled the photo stream with the correct folder on the PC...

Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database followed by Option #1 if necessary.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Regarding : LSMW return code 7 file could not be uploaded

Hi all i have a problem doing lsmw when i go for the 3 rd option after creating a structure in lsmw the moment i press copy fields from the menu i enter no. of fileds and length it asks for the txt file i attach it and when after attaching i press enter it says file could not be uploaded return code 7.
What is this error and as to why it is happening ?? and when i asked my friend to do it in his system who is somewhere else he says it is running on my system i am working currently on ECC 6 version of sap.
Please tell me as why is this happening on my system..
<removed_by_moderator>
regards
singh
Edited by: Julius Bussche on Jul 27, 2008 6:08 PM

where is the file located? please check if the file is being accessed by anyone else or if the file is open while your trying to attach it.
hope this helps.
tyken

Revel Error Message: "Some files could not be uploaded."

Error Message: "Some files could not be uploaded. 1 file was unable to be uploaded and was skipped." I am a Revel user from its inception. I have never had upload errors before in Adobe Revel. I am trying to upload jpeg files in the same way I have done for months, which is by dragging and dropping files directly into an album I have created. Starting yesterday, only some files upload properly. Others receive the above error message. When I have tried to re-upload the jpegs which have not gone, I receive either the same error message or a slightly different error which indicates the files are not uploading because they are duplicates. They're not duplicates and appear nowhere else in my Revel albums. I have rebooted my Window 7 PC, I have repeatedly logged out and back into Revel. I have tried both Firefox and IE. I have tried creating new albums and uploading the failed files to a new album. I have cleared my Firefox cache. I have tried both the "drag and drop" feature and the "Add Photos or Videos" button in Revel. I have tried using the "Export to Revel" feature in Adobe Photoshop Elements 11. I have tried uploading never-before-attempted files, and - on average - only 25% of those brand-new files are uploading. I am a subscriber and pay for the Revel service, so I am not bumping into any upload quotas. I have read through these forums and have found problems similar to mine as far back as May 2013, but none of the problems ever seem to have been resolved other than the users simply giving up. Can you help? I am becoming increasingly confused with respect to which files have succeeded and which files have failed. Thank you. -Dori

Yvonne-
You can have many libraries with many albums and files within them. Each library is independent, so if you upload a file to two libraries then you two copies. If you put a photo from a library in albums that live within that library, then there is only one copy in the library that each album has access to so it will show up when you view the album. This might help : http://forums.adobe.com/message/5197228#5197228.
I found a few incomplete files in your account also. We will take care of this for you and contact you when it is complete.
Pattie
Some of these links might also be useful to you:
Revel FAQ’s:
http://forums.adobe.com/community/revel/faq
especially:
FAQ: Where can I learn tips and tricks about Revel? http://forums.adobe.com/message/5798092#5798092
FAQ: How do I share my photos in Revel? http://forums.adobe.com/thread/1295026
FAQ: How do I add (upload) files to revel? http://forums.adobe.com/thread/1162795?tstart=0

Error Message: "A virus was detected in FILENAME. This file will not be uploaded"

I have been synching files using Creative Cloud Connect for many months. During the past few weeks, I get the message "Some files failed to sync". When I click on "Learn more", it has 3 files there and all have the message "A virus was detected in filename . This file will not be uploaded". I scanned all three files with AVG and Malwarebytes (installed on my system) and both report that there is no virus in those files. I have tried to chat with support but I could not find any resolution with them. I believe that I never got to the right place. I was connected with 5 different people. At the end of the last discussion I spoke to Adobe Captivate support. It so happens that the files with that error are all Adobe Captivate files. But that support also concluded that they couldn't help. I could not find similar entries in the forums either. Did anyone else have this problem?
I appreciate any help.
Angela

No unfortunately, I have not. I spent over an hour on the phone with them already regarding this topic. In the end, the support in Adobe Captivate (that's the 5th support group they connected me to) told me that I wasn't allowed to upload Captivate files since Adobe Captivate 8 is not a CC application and that's why the problem was happening. I am absolutely sure that this is untrue since I have many Captivate files on CC. I think the key will be to get to the right support group. Good luck! I really hope you find a solution. Keep me informed. Thanks.

Virus Detected (403), Your file could not be uploaded because it contains a virus.

From a Windows 7 Ultimate PC I tried to upload a PDF portfolio containing 35 PDFs. The upload failed with the message "Virus Detected (403), Your file could not be uploaded because it contains a virus."
It is highly unlikely that this PDF portfolio or its 35 PDFs contain a virus. It passed a scan by Microsoft Security Essentials. Any suggestions?
Bill

Hello,
I've got the same 403 error when I want to upload a ebook (purchased on peachpit, see this url for ebook), but when I scan it (windows 8 / avast) no virus found.
Olivier

JAR file does not get uploaded to client for my SERVLET generated APPLET

Some help please...
I have a servlet that generates the HTML code that contains an APPLET. This APPLET needs a JAR file that is listed under its ARCHIVE property. The SERVLET is in a JAR file that is in the same directory as the other needed JAR file. If I create a static HTML with the output of the SERVLET it works fine. But if go through Weblogic the needed JAR file does not get uploaded to the client so I get a java.lang.NoClassDefFoundError:and my APPLET does not load.
Q1: I am not sure what to put under the CODEBASE tag. I tried "." and I also tried "http://mymachine" but both did not work. I also tried without the CODEBASE tag. No luck. The SERVLET is bound to http://mymachine/servlet.
Q2: Does anyone have any suggestions on how to do this? Is there a way to force the browser to upload a certain JAR file?
Thanks...

It works!!
This is what I did:
The jar file in question was the weblogic.jar. I tried putting it under the lib directory of my war file but I had problems because the weblogic.jar contains other war files inside so when I tried to deploy my war file it also tried to deploy the inner war files which for some reason did not work. So I tried removing the war files from the weblogic.jar and this time I had no problems deploying my war file but I still could not find the classes I needed. So I tried moving the weblogic.jar to the root dir of my war file and it worked!! Now the trick here was: I did not set the CODEBASE AND I had the ARCHIVE paramenter set in TWO places like below:
<APPLET CODE = "marketmap.client.MarketMapApplet"
ARCHIVE = "weblogic.jar"
WIDTH = "657"
HEIGHT = "382"
ALIGN = "BOTTOM"
ALT = "APPLET tag not recognized">
</XMP>
<PARAM NAME = CODE VALUE = "MyApplet" >
<PARAM NAME = "type" VALUE="application/x-java-applet;version=1.2.2">
<PARAM NAME = "scriptable" VALUE="false">
<PARAM NAME = ARCHIVE VALUE="weblogic.jar">
</APPLET>
Actually if you do not place a parameter named ARCHIVE (at the end) it wil NOT work. I tried with multiple jar files listed and it works great too.
Anyway I figure I'd share. Thanks for the help too.
Lastly for people who choose not to upload the jar files to clients, you should look at the bea documentation on applets. It lists a classpath servlet that allows you to provide classes to the clients without having to force them to download the jar file.

" File does not being with %pdf"

Sir
I have download a file from website. I use windows7 os. But there is a problem that a massege display " File does not being with %pdf". this problem is same in other browsers like- mozela firefox, google chrome etc. I use adobe reader 11. Please tell me its solution in detail.

Originally posted by: bryant.harris.irisfinancial.com
Upgrade to 2.1.0. The font stuff is fixed in 2.1.0
Bryant
"Brian Kallay" <[email protected]> wrote in message
news:ege41t$9qp$[email protected]..
> Hi,
>
> I am running BIRT 2.0.0 and pdf generation which works properly on windows
> is not working correctly on linux (Red Hat Enterprise Linux ES release
> 3). I am able to generate pdf's from charts but textual reports display
> varying results from completely blank to "File does not begin with
> '%PDF-'" errors depending on the report being used.
>
> I did find the following on a BIRT 2.0.1 project plan page, however I was
> not able to find anything corresponding in bugzilla:
>
> "BIRT Runtime can not find font for PDF generation on Linux. PDF document
> is missing text content although it displays images and outlines of
> tables."
>
> This seems to describe the behavior I am seeing in many cases, however
> with very simple reports the pdf contains the header row with the first
> column header displayed so fonts are not failing completely.
>
> I am going to try upgrading to the newest BIRT version but I am hoping
> that someone can confirm this is in fact a bug and not a configuration
> issue that has a workaround for 2.0.0.
>
> Thanks,
> Brian

Deployment error "file could not be uploaded because it is too large"

Hi,
I'm trying to deploy a WAR application of 220 mb and the upload page fails the the error "The file could not be uploaded because it is too large". Is there any way to workaround this problem ?. What is the limit for a WAR application ?.
Regards,
Paulo

Paul ,
Currently we have a limit of deployment archive size to be less than 100 MB.
Thanks

ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

WHAT FILES AREN'T BEING SAVED? WHAT FILES ARE SAVED?

JavaScript files are not being updated while updating managed solution over Dynamics CRM Online

Hi Support,
While I am updating a managed solution over Dynamics CRM 2013 Online, JavaScript files are not being updated and is showing the source as of the last version of the managed solution.
I tried the same versions of solution on my CRM 2013 on-premise install (test organization) and it updated successfully.
This is a bit urgent issue. Please suggest how to resolve this.
Online version of the CRM is
Microsoft Dynamics® CRM Online Spring '14
(6.1.1.1855) (DB 6.1.1.1847)
blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pk

Our technical team managed to find the immediate cause for the problem, and a solution.
According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
Where <APPLICATION> is the name of the problematic cube.
After that everything is working.

Images and .properties(bunldes) files are not being found from my JSPs

Hi,
I have created .ear file by using ANT Application. And deployed into Oracle9iAS(OC4J). Here problem is that images and .properties(internationalization bundles)files are not found from JSPs.
Here is my directory structure.
public_html--->locale -->BusinessEntity -->businessentity_en_US.properties
--->enterprise -->images -->knowldege.jpg
--->BusinessEntity-->BEAdd.jsp
in my jsp bundle(.properties)file is accessed like this:-
<i18n:bundle baseName="/locale/-->BusinessEntity/businessentity" id="businessentity" locale="<%= locale %>" />
in my jsp images accessed like this:-
src="/enterprise/images/knowldege.jpg".
In my working environment, without creating .ear file, images and .properties files are being found my JSPs. But if i create .ear file and after deploy, images and .properties files are not being found my JSPs.
please let me know where i might did wrong
thanks in advance
srinivas

Hi i am again. Here is my configuration files(server.xml and default-web-site.xml)
server.xml :-
<?xml version="1.0"?>
<!DOCTYPE application-server PUBLIC "-//Evermind//DTD Orion Application-server//EN" "http://xmlns.oracle.com/ias/dtds/application-server.dtd">
<application-server application-directory="../applications"
deployment-directory="../application-deployments"
>
     <library path="../tools.jar" />
     <rmi-config path="./rmi.xml" />
     <jms-config path="./jms.xml" />
     <log>
          <file path="../log/server.log" />
     </log>
     <transaction-config timeout="30000" />
     <global-application name="default" path="application.xml" />
     <application name="nalluri" path="../applications/trainiumear.ear" auto-start="true" />
     <global-web-app-config path="global-web-application.xml" />
     <web-site path="./default-web-site.xml" />
     <cluster id="-1640090707" />
</application-server>
default-web-site.xml:-
<?xml version="1.0"?>
<!DOCTYPE web-site PUBLIC "Orion Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">
<web-site port="8888" display-name="Default Oracle9iAS Containers for J2EE Web Site">
     <default-web-app application="nalluri" name="Commonwar" />
     <access-log path="../log/default-web-access.log" />
</web-site>
thanks in advance
wating for reply
srinivas

Localizing "The file could not be uploaded because it is too large"

When uploading file af:inputFile in case of larger file as limited in web.xml then this message appears:
Warning: The file upload failed
The file could not be uploaded because it is too large
How to localize this message (maybe some from http://docs.oracle.com/cd/E15523_01/apirefs.1111/e15862/toc.htm?) or how to catch this error to show custom message?
JDev version: 11.1.2.1.0
Regards,
Sašo

Hi,
Do you want to try to override the error message as mentioned here?
http://docs.oracle.com/cd/E14571_01/apirefs.1111/e15862/toc.htm
af_inputFile.MSG_UPLOAD_ERROR Summary error text used to generate a faces message on a failed file upload.
af_inputFile.MSG_UPLOAD_ERROR_DETAIL Detailed error text used to generate a faces message on a failed file upload.
Thanks,
Srini.

Licence file is not being uploaded to NX 9k ?

Similar Messages

Maybe you are looking for