Licence required for Business Package download ?
Hi,
I like to download the "Business Package for Employee Self-Service (mySAP ERP 2004)" for the integration to the SAP Enterprise Portal.
I found it here: https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
But instead of a download link I can only see that a licence is required for the download.
I think that my company already has (or will buy) the licence.
But what steps are now needed to activate the licence for my SDN account?
Or whatelse must be done by my company to download the business package?
Thanks for your help.
Regards,
Thomas
Hi Thomas,
in case you are sure that you hold the required license, please check the following:
- you need to be signed with your S-User ID (the ID to Service Marketplace) at SDN
- additionally, you need to maintain User Mapping for this ID for the data source 'Service Marketplace' in 'My Profile'
If you still do not see a download icon, please check with your SAP account manager if you hold the required license.
If there are other technical problems, you may also contact [email protected]
Kind Regards, Anke
Similar Messages
-
Portal version required for Business packages deployment
Hello All
I have to deploy the following business packages in Portal
Business Package for Recruiting Administrator 1.41
Business Package for Recruiter 1.41
Business Package for Employee Self-Service (SAP ERP) 1.41
Business Package for Manager Self-Service (BP ERP05 MSS 1.41)
Business Package for Talent Development Specialist 1.01
Business Package for Talent Management Specialist 1.40
Can you please help me find out the portal verison required for them
We are on currently EP 7.0 SP12
RohitHi,
Check SAP Hinweis 1129139 - SAP ERP Enhan. Pk.1 SPS 05(03/2008) Release Information Note
Please check below extract from this note:
Software Components SP Level
SAP ECC Server VPack
ECC-VPACK 601 SP05
ERP VALUE PACK HR 601 SP05
SAP FinServ Claims Mgmt VPack
IS-FS-CM 601 SP05
Portal Content
BP ERP05 CLAIM CENTER AGT 1.01 SP05
BP ERP05 CLAIM HANDLER 1.01 SP05
BP ERP05 EXPENDITURE CERT 1.01 SP05
BP ERP05 TALENT DEV 1.01 SP05
BP ERP05 HR ADMINISTRATOR 1.11 SP05
BP ERP05 COMMON PARTS 1.11 SP05
XI Content
XI CONTENT STORE CONNECT.1.0 SP01
XI CONTENT ECC-VPACK 601 SP05
XI CONTENT GS1 1.0 SP01
XI CONTENT UN/CEFACT 1.0 SP01
XI CONTENT PROMERLAYINTEG 6.7 SP01
XI CONTENT DEMAND MGMT 1.0 SP01
Thanks
Sunny -
Info. required for Business Package for GL accounts.
Hi,
Please let me know business package for
1.General ledger creation
2.General ledger changing
I need this package for Adobe interactive forms for web dynpro Java for Portal.Kindly let me know also scenario names as well.
Thank you,
LaxmikantLaxmikant,
check this link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/b4/af2ece0cf94427956546a15da8f303/frameset.htm
Thanks
Bala Duvvuri -
Is a separate licence required for clustering?
Hi.
Is a clustering licence required for Weblogic 6.1? Using the downloaded
bits, can we not setup even a simple cluster? In short, what are the
limitations of the download bits?
Thx,
- deepak
You don't need another "cluster license". The downloaded
version is clusterable.
Reards,
Lynch
"Deepak Balakrishna" <[email protected]> ¼¶¼g©ó¶l¥ó
news:[email protected]..
> Hi.
>
> Is a clustering licence required for Weblogic 6.1? Using the downloaded
> bits, can we not setup even a simple cluster? In short, what are the
> limitations of the download bits?
> Thx,
> - deepak
>
-
New portal forum for business packages?
I think it might be useful to have a separate forum under the portals area for business packages. There is often confusion if a question is related to portal content or portal implementation and a separate forum would help this.
CheersHi Marilyn and Uri
Potential forum name: Pre-packaged portal business content
Forum description: This forum is for discussing the installation and configuration of business packages mentioned in the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio">Portal Content Portfolio</a>. Topics might include licensing, portal version compatability, and back-end configuration.
Reason for separate forum: A lot of the business packages have a backend component or extra development requirements which goes beyond straight portal details. For example, the XSS (old ESS and MSS) make use of Web Dynpro for Java and some backend ERP or R/3 configuration.
The portal content development forum would still be aimed at those using the PDK and the portal implementation forum would be more about user management and PCD.
Cheers -
Implementation/config guide for "Business package for Product"
Hi,
I need implementation/config guide for "Business package for Product".
If anybody has it please send it to [email protected]
Thanks
VinitDid u get the same ?
If u have it can u send it to [email protected]
thanks -
Source Code for Business Package for Products
Hi,
I need to the source code and customization steps for Business Package for Products.
Please let me know how and where can i get this.
Thanks in Advance
PrashilAugustine Vinish wrote:
Hi Team ,
I have find out the source code of the Package from dba_source at text column .
How can I find out
*1 .where the Database is mounted ie Server information and*
*2 .Name of the Sql file contains the package body*
*3 .location of the file in the Server*
Regards ,
AugustineHi - the source code isn't read in from a file by the database, it's actually stored in the database itself (have a look at the user_source view). Now you may have text files backups of your source code, that have been used previously to create the packages, but the database won't store any info about the file used to do this. -
Business Package download from SDN
Hello,
I am trying to download business package from sdn it is giving following error with page cannot be displayed
and displaying my userid and password on the browser.
Can you please suggest me how to proceed further to download BP from SDN
Regards
SIVAYou need a SAPNet S-User-Id to download the business packages. If you have an SDN-ID and a SAPService-UserID Like "S000xxxxxxx" (which your SAP-Admin can order for you) you can ask to merge these two IDs and then you are able to download. If you have no connection to a licensed SAP-System, you cannot download the BPs.
-
CFolders System for Business Package Buyers
I am very new in KM and cFolders area.
Currently we have already installed EP+EPC on Netweaver04s and trying to apply
business package Buyers.
The installation guide of Business package said that we need to have SM59 RFC
connection to cFolder system.
Anyway, as I have little knowledge about cFolder system. I don't know how
I can navigate to that and do the initial testing.
Kindly advise.Dear G,
As I see your back-end system has 2 app servers... to cofigure the portal iViews to use both app servers you need to define that in the portal system object that is defined to connect to the backend system... You should look if the system object you use for connecting to srm is of the type: "SAP_R3_LoadBalancing"
See also: http://help.sap.com/saphelp_nw70/helpdata/EN/1f/bddf3d48b05d5ae10000000a11405a/frameset.htm
In addition because you are talking about ITS you could configure a WebDispatcher in front of your Backend SRM system...
Good Luck,
Benjamin Houttuin -
Load balancing for Business Package iviews
Hello Gurus,
we have installed SRM Business packages on our Portal system and accessing the SRM which has 2 application servers.How can we make the iviews to access any one of the application server as the link to ITS in iviews is static.What is the easiest and best approach to get them load balanced using Business Package iviews.
Regards!Dear G,
As I see your back-end system has 2 app servers... to cofigure the portal iViews to use both app servers you need to define that in the portal system object that is defined to connect to the backend system... You should look if the system object you use for connecting to srm is of the type: "SAP_R3_LoadBalancing"
See also: http://help.sap.com/saphelp_nw70/helpdata/EN/1f/bddf3d48b05d5ae10000000a11405a/frameset.htm
In addition because you are talking about ITS you could configure a WebDispatcher in front of your Backend SRM system...
Good Luck,
Benjamin Houttuin -
Multiple backend systems for business package ESS/MSS
Hi,
I would like to know whether there is a smart solution for connecting the business package ESS/MSS with multiple backend systems (up to 10 systems).
I am aware of the possibility using parameter "sap-wd-arfc-useSys", but this implies, that content needs to be duplicated n-times in order to be able to maintain the Jco destination suffix.
Any hint, also for custom built solutions are very welcome!
Best regards,
JohannesJohannes
There is some problem with the link
See this.
Connecting multiple SAP Systems
Thread name is 'Connecting multiple SAP Systems'
Krishna Murthy -
Skype for Business Server download
Has Skype for Business Server been released today? If so, is there an evaluation version available to download?
Download is on MSDN today, you'll need a subscription to access.
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013. -
Source Code for Business Package Assets
If anyone customized I would like to know how to get to the Java source code for Asset Business Package
Regards
MikeAugustine Vinish wrote:
Hi Team ,
I have find out the source code of the Package from dba_source at text column .
How can I find out
*1 .where the Database is mounted ie Server information and*
*2 .Name of the Sql file contains the package body*
*3 .location of the file in the Server*
Regards ,
AugustineHi - the source code isn't read in from a file by the database, it's actually stored in the database itself (have a look at the user_source view). Now you may have text files backups of your source code, that have been used previously to create the packages, but the database won't store any info about the file used to do this. -
Disk space required for business content activation
Hi everyone,
I'm looking for information about how much disk space is required for activation of differents parts of business content (or ultimately, ALL business content in NW04S). I'm also looking for that information on extractors side on R/3.
Reason why i'm asking is that I am convinced that it is better to activate as much Biz Content as possible straight at the beginning of an implementation project even though part of it should not be used in the first place(mostly because if you activate BC later while already in production you have high risks of overwrite or conflicts with existing objects). However I am often opposed the argument that this consumes useless diskspace blah blah blah...
I'd be curious to know the exact diskspace Biz Content actually takes when activated, so any information about it is welcome.
Thanks!
Christianiam also agreeing wih ur opinion it is better to activate as much business content a implementaio level
-
Cook book for business package:compensation specialist and HR connectivity
Hi all,
Have any of you configured Business packages compensation specialist and Hr connectivity, do you any cook books or Documents about how to configure it.
If so please send it to my ID:[email protected]
Helpful docs will be much appreciated.
thanks in advance.
Regards,
Vivek>
Siddharth Rajora wrote:
> Yes these are the only versions available, no changes have been done
> so you can use it for ehp4
>
> 'BP Compensation Specialist 60.2'
>
>
> there was no plans to release a new version of Business
> Package for Compensation Specialist for ERP 6.0 (ECC 600)
>
> PA-EC is the successor product in ECC 600 and as you have
> seen this BSP works from PA-EC menu (or as a standalone URL)
>
> MSS ECM is the corresponding delivered
> functionality from the Portal side but provides
> specifically manager/employee ECM related actvities and as you have seen
> may not include exactly the same functionality as BP Comp Specialist
> - this is because product area PA-EC has
> original ownership of this BSP, we at EP-PCT-MGR-HR support
> provide support primarily for problems encountered using
> Business Package (BP) for Manager Self Services (MSS) and the
> ECM workset delivered with this BP
>
> you can refer for more information here
>
> http://wiki.sdn.sap.com/wiki/display/ERPHCM/Initialstepsin+MSS
HIi Siddharth, thx for confirming, this was my guess.
It also appears that much of the new ECM analytics integrated with BW in EP5 is being moved under the TMS 1.51 (Talent Management Specialist) Application.
If they are moving ECM reports there, I don't understand why you would not just incorporate all the BSP links / folder structures so that 'BP Compensation Specialist 60.2' could be officially retired.
Maybe you are looking for
-
ASA 5510 Anyconnect VPN question-"Hairpin" vpn connection on same external interface
I have a Cisco ASA 5510, I want to allow a VPN connection to be established by a client on one of the inside interfaces(10.20.x.x) to be able to go out the single External interface and get authenticated by the ASA to create a VPN tunnel to the other
-
Content in iTunes Media folder is not loaded on new Computer
1. Yesterday I moved my iTunes Media folder from Computer A to a external HD. Used the instructions found here and everything works/worked great. I removed my old iTunes Media folder and verified that Computer A was indeed super happy and e.g. found
-
I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backu
-
Best optical media (cd/dvd) for optical drive, iMac 21.5
I had my optical drive replaced 2 weeks ago. I had bought 3 different cd/dvd media OEMs. The imac will recognize some but others fails. Apple refuses to publish or share a list of media that will always work with their optical drive. One tech guy tol
-
Purchased Music, Can't Download
I have now purchased two albums in the last two days but can't download the music. I get a message saying check the network connection which makes no sense because I am online with the store already making the purchases. I get the message asking am I